Most P2P commands are not working

Recently "chat bombing" has become a big thing for trolls. For example, they get added to a group, and soon Ctrl + A their entire contact list and ruin the group. I have been trying to cut this off at the source by using a p2p chat group so I can use the JOINERS_BECOME_APPLICANTS option and prevent the added members from spamming and increase general security. However, the old commands still do not work. I attached an image showing what is displayed from "/get options" after I tried adding the JOINERS_BECOME_APPLICANTS option thrice. The option does not get added (at least from what I can see with /get options). Is there a fix for this or is this a permanent change? P.S. I also tried adjusting ranks of willing "guinea pig" users to helper and listener, nothing happened. P.S.S. Yes, I used /createmoderatedchat

The "Applicant" role model isn't really working indeed. I recommend to disable joining via link by using the /set options -JOINING_ENABLED command instead and only manually add people you trust.

Similar Messages

DACP commands are not working on Ipv6 enabled Airplay ITune service on MAC book.

DACP commands are not working on Ipv6 enabled Airplay ITune service on MAC book.
As we have gone through the source code(Airplay
Audio POSIX receiver v190.9.p6) in dnssd_clientshim.c file and in API DNSServiceGetAddrInfoResponse has provided the implementation for ipv4 only.
The test setup to test the DACP over IPV6 is by disabling the IPV4
from MAC book and only enabling the Ipv6 .
We are not sure if the test procedure is correct, please clarify the same.

Hi,
It is because of the license. In WS-C3750X-48P-L, you have a LANBASE license whereas in WS-C3750X-24P-S you have an IPSERVICES license.
FDR_SW#show version
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE5, RELEASE SOFTWARE (fc1)
License Level: lanbase
License Type: Permanent
Next reload license Level: lanbase
In a LANBASE license, ip routing and ip multicast commands are not supported.
Hope this helps.
Thanks,
Arun

Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
Any advice

pcmyhre,
You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Some amixer-commands are not working.

Hello, some of the commands of amixer are not working for me, e.g. "amixer set PCM toggle" or "amixer set PCM mute". But other commands like "amixer set PCM 100%+" work fine. How can I change this? Especially I want to use the toggle-command for the hotkey on my laptop.
Greets, Mo.

Thanks for your help, but sset does not work . And I am a user in the audio group... So what else could help?
Last edited by Mo (2007-01-29 22:27:26)

Some key commands are not working

I have a 2010 MacBook Pro running OS 10.10.2.
When I use cmd/shift/4, nothing happens. However, these keys work individually. Similarly, in Pages, hitting cmd/shift/> will zoom the content in the window, but cmd/shift/< will not zoom back out. I've check my keyboard settings and all of the keys are mapped correctly and set to default settings. None of them seem stuck down.
Does anyone have any ideas of other things I can check to restore these functions? Thanks!

Yes, I've done this already. It looks just like your image.
I rebooted, hoping that would fix it and it did not. Also, this started before I loaded Yosemite and I was hoping loading it might fix the problem if it was something simple like that.
I checked the apps tab also (I have no apps) but the only one on there was the "show help menu" button and the keys listed for it are not replacing any other commands.

After i have upgraded to snow leopard my copy and paste commands are not working

hello, i am very frustrated now, it's been two weeks since i have upgraded my mac os to snow leopard but the copy and paste commands are no longer working. i have searched thru the communities but i cannot find something that answers my query. please help as i do not want to resort to downgrading back my OS. thanks in advanced.

Maybe here http://support.apple.com/kb/HT3964
If you do not have a removable battery
power down, power back up and hold the following keys, left side shift, control, option. Hold these keys till the gears stops spinning, release. Reboot.

Some commands are not working

some of commands suddenly stopped working like reboot ,lsusb etc . any idea why ?..

You can try to copy the content in '/etc/skel/' to your home folder with 'cp /etc/skel/* ~/'. This should overwrite your local bash config files. If this doesn't help, then you have to update the '/etc/profile' file. There should be a '/etc/profile.pacnew'. Just move it 'mv /etc/profile.pacnew /etc/profile'. This should fix it.

Most search engines are not working, only Google Search works and I get 404 file not found error when clicking the links.

I have been trying virus killers, malware software from microsoft, I uninstalled Firefox and reinstalled it, I used the option to change all my options to the basic default installed options, I am able to search without problems using Internet Explorer on all search engines, Google Search engine works in firefox browser; but all the links give the 404 file not found error. Links from my Gmail account do not work either...giving me the 404 error. Firefox is much faster than Internet explorer however, this link problem makes me wonder if firefox is really any good.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Commands are not working

I am running Solari 9 in my ultra10 machine. I am unable to run clear command. but when i am checking : $echo $PATH clear it shows
/usr/sbin: /usr/bin: / usr/dt/bin: /usr/openwin/bin: /bin: /usr/ucb clear
I am also unable to run Netscape browser:
Error: No web browser coomand found in your path.
But the command is in path
I am able to run clear command from windows machine using Telnet to access the ultra10.

That path looks strange. Its got lots of extra spaces in it, unless those are introduced by a cut and paste error.
And the correct way to tell if a command is in your path is
which clear.
echo $PATH clear just prints out the value of $PATH then print the word clear.

My main apps are not working

Help...
I have got a six-year-old emac and when I switched on to use it today, I found that some of my apps were not opening.
Needless to say, it is the key ones which I use most often which are not working - Mail, Firefox, Safari, iTunes and iPhoto, as well as a few others I use occasionally.
Some apps, such as address book and iCal, are working OK.
I have tried deleting a few things as I was getting close to my memory being full, also unplugging everything and plugging it all back in again.
Anyone with any ideas on what I can do?
I am thinking if the worst comes to the worst, I will transfer all files I need to keep onto an external hard drive and reinstal (tiger).
However, any other tips would be much appreciated. I probably will not be able to answer any technical queries right away as I am using a relative's PC as I obviously don't have web access at home!
Hopefully someone can help...

Thanks for your reply... that was kind of you...
I was running Tiger so I thought I could probably do a reinstall and be able to keep my documents folder and hopefully my photos too... my music is saved on an external hard drive.
Unfortunately I couldn’t find my Tiger disc! I loaned it to a workmate a year ago, forgot to ask for it back and he has since left the company and as far as I know, the country!
I decided to reinstall from my original disc, version 10.2.4. I actually had to do it twice as on the first occasion it wasn’t taking my password at start-up for some reason.
The upside is I’ve now got a web browser (Internet Explorer!) and mail again. Fortunately my emails transferred over OK.
However, I’m probably going to hve to buy another version of Tiger, or even upgrade to Leopard, as soon as possible. I don’t think I’ll be happy with Apple circa 2003!
In answer to your questions, there were crash logs reported in the crash reporter (sorry can’t remember the details), there was no error message displayed when I tried to open the apps but the icons did bounce a couple of times in the dock before then falling back to rest unopened, without any arrows appearing to let me know it was on its way...
I have only one user account, although in hindsight it might have been a good idea to set one up and try it...

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restod

Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?

What's more, they don't even show on the bluetooth devices list..

Hello, how much did you pay when some parts of the keyboard keys are not working properly due to accidental spilt of tea?

I accidentally spilt a tea on the keyboard of my Macbook Air 11'. I managed to wipe the keyboard and saved my laptop. However, I noticed that the Spacebar, Shift and Command keys are not working as it should be. It's like something's stuck inside that makes these keys hard to press as usual. I refered this problem to Amsys, Berwick St London, as the reservations in Apple Stores are full. Do you have any idea how much is the cost for diagnosis and repair if ever?
Please help.

if you spilled a good bit of tea, its a serious problem, yes.
it got inside, and will corode, and bad things will begin to happen.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

HT4103 my sudo command is not working

Hello, when i type sudo it show bellow message
Arifur-Rahmans-MacBook-Pro:~ arif$ sudo
-bash: sudo: command not found
when i type ls
Arifur-Rahmans-MacBook-Pro:~ arif$ ls
-bash: ls: command not found
Please help me i am not able to work anythings.

When I said type
echo $PATH
I did mean PATH in ALL CAPITALS. When working on the Unix side of Mac OS X, as weill all Unix systems upper and lower case do matter.
But from the error message, I can see that somewhere along the way, mongodb (a database package), and the modification of PATH was done incorrectly.
If you installed MongoDB, AND if the instructions had to modify your .profile (or perhaps .bash_profile), then either their instructions were wrong, or you missed a step, which explains why you can not enter commands are not found
PATH is a Unix environment variable that contains a colon separate list of directories where the shell will look for commands when you enter them at the command prompt.
So your choices are delete the offending .profile (or perhaps .bash_profile) and forget about MongoDB, or if you do need MongoDB, then fix your .profile (or .bash_profile) so it has a properly formed PATH environment variable.
Fixing this would look like
/bin/ls -a # this will show you all the files starting with a period (dot) as in .profile or .bash_profile
/usr/bin/nano .profile
now in this text editor use the arrow keys, and the delete key to find and delete offending text, then type in the corrected text. Nano gives you a menu at the botton of the editor with additional commands. ^O (Control-O) writes out any changes you made. ^X (Control-X) exits from Nano.
You want your PATH variable to look like (REMEMBER UPPER/lowercase is IMPORTANT) ALSO spaces or nospaces are important.
export PATH="/usr/local/mongodb-osx-x86_64-1.8.2:$PATH"
NOTICE there is a colon between the MongoDB directory path, and the $PATH. The $PATH will append your existing PATH to the end of the new PATH environment variable you are setting up. The entire PATH string is enclosed in double quotes. ALSO NOTICE, there is only 1 space between export and PATH. No spaces anywhere else in the line.
Again, I used .profile as the most likely file name, HOWEVER, your shell will look for 1 of 3 different initialization files starting with
.bash_profile
.bash_login
.profile
If will use the first file it finds in the above order and stop looking as soon as it finds a match. So it is important that you edit the correct file. The
/bin/ls -a
command will tell you want leading period filenames exist in your home directory
I'll also give you one word of caution. When playing on the Unix side of Mac OS X, and following instructions you do not understand, it is generally wise to have a very recent full backup of your system. There are some commands that can make your system unusable should you enter them blindly.
Message was edited by: BobHarris

Sqlplus -prelim command is not working.

Hi ,
sqlplus -prelim command is not working for me. It is giving me the below error.
oracle@xyz: /app/oracle/product/10.2.0/bin $*sqlplus -prelim*
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Aug 7 10:31:54 2009
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Enter user-name: oracle
Enter password:
ERROR:
ORA-24300: bad value for mode.
I am solaris 5.10 and database is 10g.
Thanks
Naveen.

what -prelim command?
sqlplus -help
SQL*Plus: Release 10.2.0.4.0 - Production
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Usage 1: sqlplus -H | -V
    -H             Displays the SQL*Plus version and the
             usage help.
    -V             Displays the SQL*Plus version.
Usage 2: sqlplus [ [<option>] [<logon>] [<start>] ]
<option> is: [-C <version>] [-L] [-M "<options>"] [-R <level>] [-S]
    -C <version>   Sets the compatibility of affected commands to the
             version specified by <version>. The version has
             the form "x.y[.z]".     For example, -C 10.2.0
    -L             Attempts to log on just once, instead of
             reprompting on error.
    -M "<options>" Sets automatic HTML markup of output. The options
             have the form:
             HTML [ON|OFF] [HEAD text] [BODY text] [TABLE text]
             [ENTMAP {ON|OFF}] [SPOOL {ON|OFF}] [PRE[FORMAT] {ON|OFF}]
    -R <level>        Sets restricted mode to disable SQL*Plus commands
             that interact with the file system.     The level can
             be 1, 2 or 3. The most restrictive is -R 3 which
             disables all user commands interacting with the
             file system.
    -S             Sets silent mode which suppresses the display of
             the SQL*Plus banner, prompts, and echoing of
             commands.
<logon> is: (<username>[/<password>][@<connect_identifier>] | /)
           [AS SYSDBA | AS SYSOPER] | /NOLOG
    Specifies the database account username, password and connect
    identifier for the database connection. Without a connect
    identifier, SQL*Plus connects to the default database.
    The AS SYSDBA and AS SYSOPER options are database administration
    privileges.
    The /NOLOG option starts SQL*Plus without connecting to a
    database.
<start> is: @<URL>|<filename>[.<ext>] [<parameter> ...]
    Runs the specified SQL*Plus script from a web server (URL) or the
    local file system (filename.ext) with specified parameters that
    will be assigned to substitution variables in the script.
When SQL*Plus starts, and after CONNECT commands, the site profile
(e.g. $ORACLE_HOME/sqlplus/admin/glogin.sql) and the user profile
(e.g. login.sql in the working directory) are run. The files may
contain SQL*Plus commands.
Refer to the SQL*Plus User's Guide and Reference for more information.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

My "undo" command does not work in the new version of GB. Please advise. This is a real problem. I had no issues with GB from iLife 11.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Most P2P commands are not working

Similar Messages

Maybe you are looking for