Most Recent Alert Log Entries - Error processing Alert Log
Hi..
Can someone help me?
When I want to check the log of alerts the following thing goes out for me:
"This shows the last 100,000 bytes of the alert log. The log is constantly growing, so select the browser's Refresh button to see the most recent log entries.
Number of Lines Displayed Error processing Alert Log"
Since I can solve it?
Number of Lines Displayed Error processing Alert Log"
check ur alert.log file content any data.
bcoz if ur alert.log file entries is null then above error is show. ( happen with me when i am purge alert.log file and try to view content of alert.log then above error received so may be problem is null contents ( empty alert.log file)).
HTH
Similar Messages
-
Mail alerts on Fatal Errors on engine logs
Is there any way to trigger mail alerts when Fatal errors are logged in OBPM Engine/workspace logs?Let me know the implementation details if some one has done this.
Thanks for the help.
To which email it will send the messages?Admin email in "Network" tab? I'm planning to send the emails to the support teams email ID. -
Mysterious repeat log entries in System events log
I tried unsuccessfully to share internet connection with 2 iMacs without router(That doesn't matter). But after this, my iMac (24" 2.8 GHz) not networked or on internet now shows this repeated log entries every minute:
com.apple.launchd[1] (com.apple.InternetSharing): Throttling respawn: Will start in 10 seconds
This message gets repeated every minute on System events log. Daily, Monthly maintenance was not done automatically earlier today on this iMac (usually it did without any problem) which was on all-night.
I checked with Disk Utility, repaired permissions. Although no problems in working, this continuous log writings disturbs me.
Thanks for any help & Happy New Year!
Best.Thanks, V.K. Did that (was asked password). System log showed after restart:
com.apple.launchd[1] (com.apple.InternetSharing[152]): Exited with exit code: 1
com.apple.launchd[1] (com.apple.InternetSharing): Throttling respawn: Will start in 10 seconds
com.apple.launchd[1] (com.apple.InternetSharing153): Exited with exit code: 1
com.apple.launchd[1] (com.apple.InternetSharing): Throttling respawn: Will start in 10 seconds
Then it started again the same way as above - with each aditional line each time as shown above. Thanks for sticking with me on this. Hope you will offer other suggestions.
Best. -
Receiving Alerts on ORA- error in Alert Log File
Hi,
I am using 10.2.0.5 OEM grid control and same versioned agent on my database servers. I have configured the alert email notification if there is any ORA- error message in my alert log file. The metric i selcted for this is "Generic Alert Log Error Status". In notification email, i see only the message that there is generic error message in the alert log file. Is there any way to set this notification so that i receive the exact ORA- error message in my alert notification email if there is any kind of ORA- error found in my alert log file?
Thanks
SalmanPlease look into the Metalink Note: 458605.1
Subject: Receiving "Clear" Notifications Unexpectedly for 'Generic Alert Log Error Status' Metric -
After most recent update firefox crashes - error message every time I try to open - open fails
Updated Firefox this morning and now I can't use it at all. It crashes and fails to open every time I try. I get an error box on my screen. Still fails to open in safe mode. Tried uninstalling and reinstalling, still same errors.
That is a problem with Roboform.
You can try to update to Roboform 7.6.2
*[https://bugzilla.mozilla.org/show_bug.cgi?id=691271 bug 691271] RESOLVED WORKSFORME Crash mainly close to startup in [@ DebugBreak ] [@ DbgBreakPoint ] with Roboform -
Log In Error "Can't log in" with my password - Win...
I log in to my microsoft account on Windows 8, usually Skype will just automatically connect. Recently it will say "can't sign in, please type in your password" and it pops up my microsoft account information as log in name and then I type in the SAME exact password I just used seconds ago to sign into my computer and it says "can't sign in." Then I have to go to live.login and change my password. I have done this more than a handful of times in the past month. It happens on my computer and also on my phone.
As soon as I change my password, I go to my skype, type it in, and it works fine. I am pretty sure the problem is with Skype and not my microsoft account because I can still log in to my computer and my hotmail just fine.
I am tired of having to change my password all of the time!! It happens at least once a week. It is particularly annoying, say, when on my lunch break I would like to just call my boyfriend overseas, but since skype can't recognize my password (even though it hasn't been changed and it is usually always automatically connected) I have to go to change my password (which includes me accessing an alternative email and typing in a code and blah bla hblah" from my phone.
WHAT GIVES ????Have you enabled the optional "two-step verification" login option?
http://blogs.microsoft.com/blog/2013/04/17/microsoft-account-gets-more-secure/ -
Does oracle log general errors
Dear experts,
I am using Oracle 11.2.0.3. I am researching on random ORA-00900: invalid SQL statement error that we are seeing in production. Does oracle log such errors in alert.log or any tables? If not can we configure to log such errors?
Thanks.Dont understand.... you are seeing ORA-00900 in production but don't know where to search this error? where do you see it?It is being logged from application in event log which I do not have access to. I wanted to check if oracle also logs such error some where.
SQL Banner : SQL*Plus: Release 11.2.0.1.0 Production on Wed Nov 28 12:12:25 2012
SQL :
SELECT
overload,
DECODE (
position,
0,
'RETURN_VALUE',
NVL (argument_name, CHR (0))
) AS name,
DECODE (
in_out,
'IN', 1,
'IN/OUT', 3,
'OUT', DECODE (argument_name, NULL, 6, 2),
1
) AS direction,
DECODE (
data_type,
'BFILE', 101,
'BLOB', 102,
'BYTE', 103,
'CHAR', 104,
'CLOB', 105,
'DATE', 106,
'DECIMAL', 107,
'DOUBLE', 108,
'INT16', 111,
'INT32', 112,
'INT64', 113,
'INTERVAL DAY TO SECOND', 114,
'INTERVAL YEAR TO MONTH', 115,
'LONG', 109,
'LONG RAW', 110,
'NCHAR', 117,
'NCLOB', 116,
'NVARCHAR2', 119,
'RAW', 120,
'REF CURSOR', 121,
'SINGLE', 122,
'TIMESTAMP', 123,
'TIMESTAMP WITH LOCAL TIME ZONE', 124,
'TIMESTAMP WITH TIME ZONE', 125,
'VARCHAR2', 126,
'XMLTYPE', 127,
'NUMBER', 107,
126
) AS oracleType,
DECODE (
data_type,
'BLOB', 0,
'CHAR', 0,
'CLOB', 0,
'LONG RAW', 0,
'NCHAR', 0,
'NCLOB', 0,
'NVARCHAR2', 0,
'RAW', 0,
'VARCHAR2', 2048,
0
) AS length,
NVL (data_precision, 255) AS precision,
NVL (data_scale, 255) AS scale
FROM
all_arguments
WHERE
data_level = 0
AND data_type IS NOT NULL
AND owner = :schemaName
AND package_name = :packageName
AND object_name = :methodName
ORDER BY
overload, position
******************** EXCEPTION PROPERTIES ********************
Errors: Oracle.DataAccess.Client.OracleErrorCollection
Source: Oracle Data Provider for .NET
Number: 900
ErrorCode: -2147467259
Data: System.Collections.ListDictionaryInternal
TargetSite: Void HandleErrorHelper(Int32, Oracle.DataAccess.Client.OracleConnection, IntPtr, Oracle.DataAccess.Client.OpoSqlValCtx*, System.Object, System.String, Boolean)
Edited by: spur230 on Nov 28, 2012 12:13 PM -
Smtp log entry, bounces, or does the mail server send bounce backscatter?
Today, I received two bounces from mail I did not send, and they reference a subdomain of a virtual domain on my machine that doesn't exist...
server is set up with domain: server.domain.com
web and mail services are available for virtual domain: service.com
So, I got what I at first thought were phishing bounces, but then when I looked in my mail logs today, I found my first ever SMTP log entries:
Feb 16 07:33:42 server.domain.com postfix/smtpd[----]: warning: hostname #.#.#.#.reverse.someone.net does not resolve to address #.#.#.#: nodename nor servname provided, or not known
I have four of those at various times this morning.
I've checked the mail logs and seen that there are connection attempts, particularly people trying plain text. I have used mxtoolbox and a few other relay checkers to be sure there is not an open smtp relay. none.
I have one site on the service.com and it has its own malware checking (wordpress install). It reports that it is clean and feeling good.
The default sites are unaccessible without http authentication.
Do those SMTP log entires mean someone has gained access? or was my server trying to process backscatter spam? I'm lost on how this could happen.What do the bounce messages say? Was the mail rejected by a remote server? If so, which one? What are some of the other log entries in the mail log? Does MX Toolbox say your email server is or is not an open relay? Are the IP addresses in your log post an internal or external address? Someone might be using your domain to send spam email but they may not be using your email server and when the messages bounce they get returned to your server.
-
Error opening installation log file.
ProblemYou are unable to install BlackBerry Desktop Manager and the following error message is displayed when you open the installation log file:
Error opening installation log file verify that the specified log file exist and is writable.
ResolutionTo resolve this issue, edit the system environment variables by completing the following steps:
Warning: The following procedure requires modifying the computer environment variables. This can result in unexpected system behavior. Document the existing values prior to implementing any changes. To search for the Install.log file or files in the temp folder:
On the Start menu, click Run and type %temp%.
Click OK.
In the Temp folder, click Search and then All files and folders. In the All or part of the file name field, type Install.log and set the Look in field value to Temp.
Click Search.
If the Install.log file is found, delete it.
In Windows® Explorer, go to the C:\ drive and create a new folder called TEMP2.
Open the Control Panel and double-click the System icon.
On the Advanced tab, click Environment Variables.
In the User variables list, select TEMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the User variables list, select TMP and click Edit.
In the Variable value field, change the file path to C:\TEMP2 and click OK.
In the Environment Variables window, click OK.
In the System Properties window, click Apply and then OK.
Restart the computer for the changes to take effect.
Repeat the installation procedure for BlackBerry Desktop Manager.
I have 8330hello,
another solution is here :
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Errors in alert log and listener log and "alter database mount exclusive"
Hello!
I need a help.
Database 11R2 works under MS Windows Server.
Whwn I start it using Services, according alert log it is started by command "alter database mount exclusive".
Next - alter database open.
After this, it seams that program, which should put data into database, can not work with it, because I see errors in alert log: ora-12537, 12560, 12535, 12570, 12547.
What does itmean and what to do?
This is extract from alert_log
ORACLE_BASE from environment = C:\Oracle
Mon Feb 04 14:54:53 2013
alter database mount exclusive
Successful mount of redo thread 1, with mount id 1458539517
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: alter database mount exclusive
alter database open
Thread 1 opened at log sequence 3105
Current log# 3 seq# 3105 mem# 0: C:\ORACLE\ORADATA\xxx\REDO03.LOG
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
Successfully onlined Undo Tablespace 2.
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
SMON: enabling tx recovery
Database Characterset is AL32UTF8
No Resource Manager plan active
Mon Feb 04 14:55:04 2013
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Feb 04 14:55:06 2013
QMNC started with pid=20, OS id=2860
Completed: alter database open
Mon Feb 04 14:55:11 2013
Starting background process CJQ0
Mon Feb 04 14:55:11 2013
CJQ0 started with pid=25, OS id=2000
Mon Feb 04 14:55:11 2013
db_recovery_file_dest_size of 4977 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Feb 04 15:00:29 2013
Starting background process SMCO
Mon Feb 04 15:00:29 2013
SMCO started with pid=32, OS id=3212
Edited by: kogotok1 on Feb 4, 2013 4:54 PMThank you.
But in the same time - when I see in alert log those error messages ora -12560, 12537,12535,12570 and so on - clients programs, whiie try to connect, hang up.
For sql plus takes 20 minutes to connect.
lsnrctl status gives the following
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 04-FEB-2013 16:01
:46
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx-BD.mosxxx
.elektra.net)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 01-FEB-2013 10:22:48
Uptime 3 days 5 hr. 39 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\xxx-BD\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxx-BD.mosxxx.elektra.net)
(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XXX" has 2 instance(s).
Instance "XXX", status UNKNOWN, has 1 handler(s) for this service...
Instance "xxx", status READY, has 1 handler(s) for this service...
Service "XXXDB" has 1 instance(s).
Instance "xxx", status READY, has 1 handler(s) for this service...
The command completed successfully
To tell the truth I am confuse - I thought I have only 1 service "XXXDB" and 1 instance - "xxx".
May be I have wrong entries in tnslsnr.ora? -
Errors in alert log fileand application log file
Hi,
Oracle EBS version 12.1.1
RDBMS version 11.1.0.7.0
OS RHEL 5.4
All of a sudden I am not able to access my R12 system.It shows me 500 Internal server error.
I am not able to connect to database from client either.(SQLPLUS or any other tools hangs while trying to connect to DB)
Although I can connect to database from server.
Errors in DB alert log file is :
=================
Fatal NI connect error 12547, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:08:12
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS-12547: TNS:lost contact
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
ORA-609 : opiodr aborting process unknown ospid (12562_47163992198336)
Sat Jul 30 14:10:12 2011
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:10:12
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
ORA-609 : opiodr aborting process unknown ospid (12599_47919733853376)
Sat Jul 30 14:11:43 2011
Incremental checkpoint up to RBA [0x137.8b97e.0], current log tail at RBA [0x137.8c0c4.0]
Sat Jul 30 14:11:52 2011
Fatal NI connect error 12547, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:11:52
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS-12547: TNS:lost contact
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
ORA-609 : opiodr aborting process unknown ospid (12627_47439235198144)
Sat Jul 30 14:14:32 2011
Fatal NI connect error 12547, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:14:32
Tracing not turned on.
Tns error struct:
ns main err code: 12547
TNS-12547: TNS:lost contact
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
ORA-609 : opiodr aborting process unknown ospid (12890_47772667911360)
Sat Jul 30 14:15:08 2011
Beginning log switch checkpoint up to RBA [0x138.2.10], SCN: 10132185231186
Thread 1 advanced to log sequence 312 (LGWR switch)
Current log# 3 seq# 312 mem# 0: /u01/oracle/VIS/db/apps_st/data/log1.dbf
Sat Jul 30 14:15:52 2011
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:15:52
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
ORA-609 : opiodr aborting process unknown ospid (13156_47242339073216)
Sat Jul 30 14:20:15 2011
Completed checkpoint up to RBA [0x138.2.10], SCN: 10132185231186
Sat Jul 30 14:32:04 2011
Incremental checkpoint up to RBA [0x138.5646.0], current log tail at RBA [0x138.6444.0]
Sat Jul 30 14:40:33 2011
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:40:33
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
ORA-609 : opiodr aborting process unknown ospid (14536_47011734056128)
Sat Jul 30 14:45:33 2011
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:45:33
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
ORA-609 : opiodr aborting process unknown ospid (14688_47186744614080)
Sat Jul 30 14:47:13 2011
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Linux: Version 11.1.0.7.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.1.0.7.0 - Production
Time: 30-JUL-2011 14:47:13
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Client address: <unknown>
ORA-609 : opiodr aborting process unknown ospid (14684_46999375879360)
--Repeatedly getting this error.
Error in application log is:
================
11/07/30 14:45:53.449 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
11/07/30 14:49:53.591 html: Broken pipe
11/07/30 14:49:53.591 html: Broken pipe
11/07/30 14:49:53.592 html: Broken pipe
11/07/30 14:49:53.592.592 html: Broken pipe
11/07/30 14:49:53.592 html: Broken pipe
11/07/30 14:49:53.592.592 html: Broken pipe
11/07/30 14:49:53.593 html: Broken pipe
11/07/30 14:49:53.593 html: Broken pipe
11/07/30 14:49:53.594 html: Broken pipe
11/07/30 14:49:53.594 html: Servlet error
java.io.IOException: Broken pipe
11/07/30 14:49:53.594 html: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
11/07/30 14:49:53.594 html: Servlet error
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
11/07/30 14:49:57.630 html: Broken pipe
11/07/30 14:49:57.630 html: Broken pipe
11/07/30 14:49:57.630 html: Broken pipe
11/07/30 14:49:57.630 html: Broken pipe
11/07/30 14:49:57.630 html: Broken pipe
11/07/30 14:49:57.631 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
11/07/30 14:49:57.632 html: Broken pipe
11/07/30 14:49:57.632 html: Broken pipe
11/07/30 14:49:57.632 html: Broken pipe
11/07/30 14:49:57.633 html: Broken pipe
11/07/30 14:49:57.633 html: Broken pipe
11/07/30 14:49:57.633 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:619)
11/07/30 14:55:33.775 html: Broken pipe
11/07/30 14:55:33.775 html: Broken pipe
11/07/30 14:55:33.775 html: Broken pipe
11/07/30 14:55:33.776 html: Broken pipe
11/07/30 14:55:33.776 html: Broken pipe
11/07/30 14:55:33.776 html: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:334)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:317)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
I tried to bounce the system.
When I executed ./adstpall.sh it took a long time (about 15 mins) and exited with status 1.
You are running adstpall.sh version 120.10
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE: adstpall.sh <appsusername/appspassword>
adstpall.sh: exiting with status 1
But I check from server that the database is up and running.
Please help asap
Thanks,
RushiOracle support has given me two docs
Note 550859.1 TROUBLESHOOTING GUIDE TNS - 12518 TNS listener could not hand off client connection
Note 340089.1 New Connections to the Database lead to ORA-12518 or TNS-12518
I do not any ORA-12518 or TNS-12518 errors in the log file entries you posted above. However, please see (ORA-00610 And/Or "unable to spawn jobq slave process " And/Or "Process(<>) creation failed" In The Alert Log And/Or TNS-12518/ TNS-12500 In Listener Log [ID 416244.1]).
Thanks,
Hussein -
Removed standby but getting interesting alert log entry
So, we had multiple set ups of primary database in our local data center, standby in remote location.
We're in the process of shutting down our remote location and have shut down our standbys gracefully, i.e., shutdown managed standby mode, removed archive_log_dest, changed archive_log_dest_state, etc. However, in some primary databases, I'm seeing a weird entry in the alert log:
Changing destination 2 from remote to local during archival of log#: 2 sequence#: 48708 thread#: 1
If I check my local destination, the archive log is created fine. In the remote location, no archives are being created.
I've not found anything on Google, Metalink, anywhere! Has anyone else seen this before, and if so, do I need to worry about it?
Oracle version is 11.1.0.7Hello;
Its just information. You can ignore it.
Went back to some 2010 alert logs and found :
network reconnect abandoned
Attempting destination LOG_ARCHIVE_DEST_2 network reconnect
Setting 'active' archival for destination LOG_ARCHIVE_DEST_2Not much chance of finding here as all old version of Oracle are gone and a SAN move makes old alert logs rare. Still it just information or Oracle would throw an error.
Best Regards
mseberg
Edited by: mseberg on Jul 31, 2012 11:32 AM
Later
Tried to recreate message using several combinations of the parameters you listed. Unable to recreate, but only have 11.2.0.3.0 to test on.
Edited by: mseberg on Jul 31, 2012 12:44 PM -
Working on following environment:
Platform -> Windows Server 2003 Version V5.2 Service Pack 2 32-bit
Oracle Database -> 10.2.0.1
My database was going to shutdown(auto) after 5 minutes of database startup. When I investigate alert log got following messages in it:
Memory Notification: Library Cache Object loaded into SGA
Heap size 2210K exceeds notification threshold (2048K)
KGL object name :XDB.XDbD/PLZ01TcHgNAgAIIegtw==
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_ckpt_7024.trc:
ORA-04030: out of process memory when trying to allocate 8716 bytes (pga heap,Get krha asynch mem)
CKPT: terminating instance due to error 4030
Mon Mar 14 11:05:30 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_q001_5816.trc:
ORA-04030: out of process memory when trying to allocate bytes (,)
Then I follow metalink note 330239.1 and got the issue resolved related to "shutdown" but getting some new error messages in alert log. Please see the below error messages:
Thread 1 cannot allocate new log, sequence 77933
Private strand flush not complete
Current log# 2 seq# 77932 mem# 0: D:\ORACLE10G\PRODUCT\10.2.0\ORADATA\NDB\REDO0_02.LOG
Thread 1 advanced to log sequence 77933
Current log# 1 seq# 77933 mem# 0: D:\ORACLE10G\PRODUCT\10.2.0\ORADATA\NDB\REDO0_01.LOG
Mon Mar 14 12:34:08 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_smon_7300.trc:
ORA-00604: error occurred at recursive SQL level 2
ORA-04030: out of process memory when trying to allocate 404 bytes (Typecheck,seg:kggfaAllocSeg)
Mon Mar 14 12:49:00 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_j000_7060.trc:
ORA-12012: error on auto execute of job 27
ORA-04030: out of process memory when trying to allocate 16428 bytes (pga heap,kgh stack)
Mon Mar 14 12:49:34 2011
Process startup failed, error stack:
Mon Mar 14 12:49:35 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_psp0_6908.trc:
ORA-27300: OS system dependent operation:spcdr:9261:4200 failed with status: 997
ORA-27301: OS failure message: Overlapped I/O operation is in progress.
ORA-27302: failure occurred at: skgpspawn
Mon Mar 14 12:49:35 2011
Process J001 died, see its trace file
Mon Mar 14 12:49:35 2011
kkjcre1p: unable to spawn jobq slave process
Mon Mar 14 12:49:36 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_cjq0_6280.trc:
Mon Mar 14 12:53:51 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_j000_7060.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x603F1A55] [ADDR:0xBB] [UNABLE_TO_READ] []
Mon Mar 14 12:53:53 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_j000_7060.trc:
ORA-04030: out of process memory when trying to allocate 753120 bytes (pga heap,kco buffer)
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x603F1A55] [ADDR:0xBB] [UNABLE_TO_READ] []
Mon Mar 14 12:54:53 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_q000_5424.trc:
ORA-04030: out of process memory when trying to allocate 123404 bytes (QERHJ hash-joi,kllcqas:kllsltba)
Mon Mar 14 13:21:24 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_mmon_7444.trc:
ORA-00600: internal error code, arguments: [kspcsetsp3], [], [], [], [], [], [], []
Mon Mar 14 13:21:27 2011
Errors in file d:\oracle10g\product\10.2.0\admin\ndb\bdump\ndb_mmon_7444.trc:
ORA-00600: internal error code, arguments: [kmgs_parameter_update_timeout_1], [600], [], [], [], [], [], []
ORA-00600: internal error code, arguments: [kspcsetsp3], [], [], [], [], [], [], []
Mon Mar 14 13:22:26 2011
Restarting dead background process MMON
MMON started with pid=11, OS id=7304
Mon Mar 14 13:44:51 2011
Thread 1 advanced to log sequence 77934
Current log# 3 seq# 77934 mem# 0: D:\ORACLE10G\PRODUCT\10.2.0\ORADATA\NDB\REDO0_03.LOG
Mon Mar 14 13:51:20 2011
Thread 1 advanced to log sequence 77935
Current log# 2 seq# 77935 mem# 0: D:\ORACLE10G\PRODUCT\10.2.0\ORADATA\NDB\REDO0_02.LOG
kindly help me out in this, as this is PRODUCTION database.
Regards,Please see the parameter values extracted from the alert log:
Adjusting the default value of parameter parallel_max_servers
from 160 to 135 due to the value of parameter processes (150)
Mon Mar 14 12:18:53 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
sga_max_size = 1577058304
__shared_pool_size = 125829120
__large_pool_size = 8388608
__java_pool_size = 8388608
__streams_pool_size = 0
sga_target = 1258291200
control_files = D:\ORACLE10G\PRODUCT\10.2.0\ORADATA\NDB\CONTROL01.CTL, D:\ORACLE10G\PRODUCT\10.2.0\ORADATA\NDB\CONTROL02.CTL, D:\ORACLE10G\PRODUCT\10.2.0\ORADATA\NDB\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 1107296256
compatible = 10.2.0.1.0
db_files = 600
db_file_multiblock_read_count= 16
db_recovery_file_dest = d:\oracle10g\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS2
kgllarge_heap_warning_threshold= 8388608
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=ndbXDB)
job_queue_processes = 10
audit_file_dest = D:\ORACLE10G\PRODUCT\10.2.0\ADMIN\NDB\ADUMP
background_dump_dest = D:\ORACLE10G\PRODUCT\10.2.0\ADMIN\NDB\BDUMP
user_dump_dest = D:\ORACLE10G\PRODUCT\10.2.0\ADMIN\NDB\UDUMP
core_dump_dest = D:\ORACLE10G\PRODUCT\10.2.0\ADMIN\NDB\CDUMP
db_name = ndb
open_cursors = 300
pga_aggregate_target = 838860800
Regards,
Edited by: user12194837 on Mar 14, 2011 3:55 AM -
Hi,
I have encountered following errors in alrt log file, its strange to see FAST_START_MTTR_TARGET is out of valid and aksing to use another value and that value is changing every second, it should be in increasing order or it should be consistent. I think i have a serious problem, so anyone could help me out on this. I am getting this "FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 24381 instead" error regurarly.
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 24381 instead.
Wed Jan 16 23:40:34 2008
Completed checkpoint up to RBA [0x2aadb.2.10], SCN: 5473742880
Wed Jan 16 23:45:51 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 24017 instead.
Wed Jan 16 23:46:21 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 23647 instead.
Wed Jan 16 23:46:52 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 23298 instead.
Wed Jan 16 23:47:22 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 22906 instead.
Wed Jan 16 23:47:52 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 22507 instead.
Wed Jan 16 23:48:22 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 22133 instead.
Wed Jan 16 23:48:52 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 21786 instead.
Wed Jan 16 23:49:22 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 21443 instead.
Wed Jan 16 23:49:52 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 21062 instead.
Wed Jan 16 23:50:22 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 20698 instead.
Wed Jan 16 23:53:53 2008
Incremental checkpoint up to RBA [0x2aadb.31b4.0], current log tail at RBA [0x2aadb.3e38.0]
Thu Jan 17 00:00:54 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 19582 instead.
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 16287 instead.
Thu Jan 17 00:34:01 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 15902 instead.
Thu Jan 17 00:34:31 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 14638 instead.
Thu Jan 17 00:35:01 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 13600 instead.
Thu Jan 17 00:35:31 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12773 instead.
Thu Jan 17 00:36:02 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12460 instead.
Thu Jan 17 00:36:32 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12338 instead.
Thu Jan 17 00:37:01 2008
Process P187 died, see its trace file
Thu Jan 17 00:37:02 2008
FAST_START_MTTR_TARGET 121 is out of the valid MTTR range, use 12248 instead.
Thu Jan 17 00:37:02 2008
Process P188 died, see its trace file
Thu Jan 17 00:37:03 2008
Process P189 died, see its trace file
Thu Jan 17 00:37:04 2008
Process P190 died, see its trace file
Thu Jan 17 00:37:16 2008
Process J000 died, see its trace file
Thu Jan 17 00:37:16 2008
kkjcre1p: unable to spawn jobq slave process
Thu Jan 17 00:37:16 2008
Errors in file /oracle/BP3/saptrace/background/bp3_cjq0_4788.trc:
Process J000 died, see its trace file
Thu Jan 17 00:37:22 2008
kkjcre1p: unable to spawn jobq slave process
Thu Jan 17 00:37:22 2008
Errors in file /oracle/BP3/saptrace/background/bp3_cjq0_4788.trc:
Thanks
JafarThis parameter, FAST_START_MTTR_TARGET ranges from 0 to 3600 seconds. It is important to specify your oracle version, since a similar issue is reported for the 10gR1 release.
The solution for it would be to increase the value to the suggested one in the alert.log file, but it could be completely out of range from the valid values, so set it to zero and let the oracle instance calculate the value. You can check the output at the V$INSTANCE_RECOVERY view at the columns TARGET_MTTR, and ESTIMATED_MTTR prior to proceeding with modificaiton.
On the other hand, I suggest you to read this metalink note
Kkjcre1p: Unable To Spawn Jobq Slave Process, Error 1089
Doc ID: Note:344275.1
for the Kkjcre1p error message.
~ Madrid -
DG Observer triggering SIGSEGV Address not mapped to object errors in alert log
Hi,
I've got a Data Guard configuration using two 11.2.0.3 single instance databases. The configuration has been configured for automatic failover and I have an observer running on a separate box.
This fast-start failover configuration has been in place for about a month and in the last week, numerous SEGSEGV (address not mapped to object) errors are reported in the alert log. This is happening quite frequently (every 4/5 minutes or so).
The corresponding trace files show the process triggering the error coming from the observer.
Has anyone experienced this problem? I'm at my wits end trying to figure out how to fix the configuration to eliminate this error.
I must also note that even though this error is occurring a lot, it doesn't seem to be affecting any of the database functionality.
Help?
Thanks in advance.
BethHi.. The following is the alert log message, the traced file generated, and the current values of the data guard configuration. In addition, as part of my research, I attempted to apply patch 12615660 which did not take care of the issue. I also set the inbound_connection_timeout parameter to 0 and that didn't help either. I'm still researching but any pointer in the right direction is very much appreciated.
Error in Alert Log
Thu Apr 09 10:28:59 2015
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc (incident=69298):
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Thu Apr 09 10:29:02 2015
Sweep [inc][69298]: completed
Trace file:
Trace file /u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/trace/<SID>_ora_29902.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning and Oracle Label Security options
ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/dbhome_1
System name: Linux
Node name: <host name>
Release: 2.6.32-431.17.1.el6.x86_64
Version: #1 SMP Wed May 7 14:14:17 CDT 2014
Machine: x86_64
Instance name: <SID>
Redo thread mounted by this instance: 1
Oracle process number: 19
Unix process pid: 29902, image: oracle@<host name>
*** 2015-04-09 10:28:59.966
*** SESSION ID:(416.127) 2015-04-09 10:28:59.966
*** CLIENT ID:() 2015-04-09 10:28:59.966
*** SERVICE NAME:(<db_unq_name>) 2015-04-09 10:28:59.966
*** MODULE NAME:(dgmgrl@<observer host> (TNS V1-V3)) 2015-04-09 10:28:59.966
*** ACTION NAME:() 2015-04-09 10:28:59.966
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x9] [PC:0x85CE503, nstimexp()+71] [flags: 0x0, count: 1]
DDE: Problem Key 'ORA 7445 [nstimexp()+71]' was flood controlled (0x6) (incident: 69298)
ORA-07445: exception encountered: core dump [nstimexp()+71] [SIGSEGV] [ADDR:0x9] [PC:0x85CE503] [Address not mapped to object] []
ssexhd: crashing the process...
Shadow_Core_Dump = PARTIAL
ksdbgcra: writing core file to directory '/u01/app/oracle/diag/rdbms/<db_unq_name>/<SID>/cdump'
Data Guard Configuration
DGMGRL> show configuration verbose;
Configuration - dg_config
Protection Mode: MaxPerformance
Databases:
dbprim - Primary database
dbstby - (*) Physical standby database
(*) Fast-Start Failover target
Properties:
FastStartFailoverThreshold = '30'
OperationTimeout = '30'
FastStartFailoverLagLimit = '180'
CommunicationTimeout = '180'
FastStartFailoverAutoReinstate = 'TRUE'
FastStartFailoverPmyShutdown = 'TRUE'
BystandersFollowRoleChange = 'ALL'
Fast-Start Failover: ENABLED
Threshold: 30 seconds
Target: dbstby
Observer: observer_host
Lag Limit: 180 seconds
Shutdown Primary: TRUE
Auto-reinstate: TRUE
Configuration Status:
SUCCESS
DGMGRL> show database verbose dbprim
Database - dbprim
Role: PRIMARY
Intended State: TRANSPORT-ON
Instance(s):
DG_CONFIG
Properties:
DGConnectIdentifier = 'dbprim'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'optional'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'MANUAL'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = 'dbstby'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
SidName = ‘<sid>’
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
TopWaitEvents = '(monitor)'
Database Status:
SUCCESS
DGMGRL> show database verbose dbstby
Database - dbstby
Role: PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag: 0 seconds
Apply Lag: 0 seconds
Real Time Query: ON
Instance(s):
DG_CONFIG
Properties:
DGConnectIdentifier = 'dbstby'
ObserverConnectIdentifier = ''
LogXptMode = 'ASYNC'
DelayMins = '0'
Binding = 'optional'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '30'
RedoCompression = 'DISABLE'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '4'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = ''
LogFileNameConvert = ''
FastStartFailoverTarget = 'dbprim'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
SidName = ‘<sid>’
StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=<db host name>)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=<service_name>)(INSTANCE_NAME=<sid>)(SERVER=DEDICATED)))'
StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.dbf'
TopWaitEvents = '(monitor)'
Database Status:
SUCCESS
Maybe you are looking for
-
I can not change the time in activity Appointment in WebUi
Dear Experts! I can not change the time in activity Appointment when creating: calendar -> month -> click on the day snapshot of problem: http://imglink.ru/show-image.php?id=e7a096115a6371ffab46c701f8e470ba When I create a Appointment (Activities ->
-
IMessage on Macbook Pro rejecting my Apple ID?
Had my hard drive replaced, and then some subsequent issues occurred after that. Finally got everything back in order and using my laptop again. I backed up everything before getting my hard drive replaced, and merged all that info back on after gett
-
HP Envy 4501 won't scan multiple pages into a single document
My HP Envy 4501 Printer won't let me scan multiple pages into a single pdf document. I already made sure that the checkbox "Create a separate file for each scanned page" is not checked under the file section in advanced settings. After I scan the fir
-
Error while Migrating Access to Oracle!
Hi, I am migrating MS Access 97 database to oracle 10g through Oracle migration workbench. I am using default repository but when I am executing C:\omwb\msaccess_exporter\omwb97.mde to generate XML file by clicking on button Export Database Schema fo
-
Adding a new printer in OS9.2.x
I am working on OS 9.2 and I need to know how to setup a printer that is connected through a network. If someone could help me with a step by step guide that would be great.