Most recent photos and thumbnails appear corrupted
a little complex this one. Recently had the hard drive replaced following seagate problem. Restored from hard drive. IPhoto11 9.2.3 All photos and albums appeared to be ther in the thumbmails. when clicked on recent photos (NB old ones still OK) the picture came up from the thumbnail and then when clicked to edit it went out of focus. Then the portrait thumbnails came up into fullscreen but when I clicked on the landscape thumbnails the triangle and exclamation mark appeared -NB same camera same time photos. Following a previous discussion I downloaded IPhioto manager and rebuilt the library. When I did the thumbnails are now just grey squares but only the most recent ones all old ones are still fine. when I click on the grey thumnbail to open in full screen the triangle and exclamation mark appears but the system still tries to do face recognition on the grey square. All a little challenging to understand - any help welcome
What do you mean it "restored itself". It can't do that. User interaction is required to initiate that.
Did you not have a recent backup of it? If not, then the data is gone.
Similar Messages
-
I've just upgraded my iPhone from ios3 to ios6 and it has taken my phone back in time. My most recent photos and messages are dated from a year ago. My music is fine, just messages and photos are gone. HELP?
Restore the device using the most recent backup.
If you have not backed up the device recently, then there is nothing to restore. -
I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?
Hello, Anita.
Thank you for visiting Apple Support Communities.
I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup. This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6. Try going through the steps in the article below.
iOS: Unable to restore from backup of a newer device
I would also check to see the backup dates in iTunes and if the backup is located on iCloud instead of iTunes.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
Cheers,
Jason H. -
When I am in the Organizer and edit a photo I want to return to the Organizer where I left off. I don't see that as an option--it always returns me to the most recent photo. Is there a fix? Thank you.
Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference... -
My phone restored and lost all my most recent photos and other information. How can I get it back !?
Yesterday my phone restored itself. Using a backup that was made a month ago I had no way to stop other than to unplug the phone. Which wipped the phone completely and then when I plugged it back in all it would do is use the old backup again. So I have lost all the photos, messages and everything else that I have made in the last month. Which as this is a business phone is not exactly helpful. Is there any way to get all these things back or are they gone forever?? Thanks for the help
What do you mean it "restored itself". It can't do that. User interaction is required to initiate that.
Did you not have a recent backup of it? If not, then the data is gone. -
As the title says,
My iphone touchscreen stopped working around two days ago, so I cannot input my passcode. I am trying to backup my most recent photos as I have been on a trip abroad to phuket the past week, and got back home but did not have time to move my photos from that trip onto my mac before the touchscreen stopped working. I have a problem because I backed up my iphone last around a month ago, but have changed my passcode since so my iphone is not allowing me to back up onto my mac through itunes. I wish I at least hadn't changed the passcode, or had my photos on icloud, but I have so many photos that the icloud storage would cost so much for me to keep them updated.. I am so frustrated right now as it's not that I have forgot my passcode, or that I don't know it at all, but I know it. I wish there was a software that I could use on my mac to enter the passcode or something. Is there a way I could do something about it?!So you are not using Photo Stream? If you are, then you can turn on Photo Stream on iCloud on your Mac, and then go to iPhoto or Aperture and the Photo Stream will show under "Web" in the sidebar.
You can also set up your iPhoto or Aperture preferences to automatically import your Photo Stream, so any photos you take with your iPhone camera will upload and import automatically and will show under events, broken into monthly groupings.
Photo Stream does not use any of your iCloud storage.
Here are the Preference Screens I'm referring to:
iPhoto:
Aperture:
One other thing concerning your Touch Screen. Have you tried resetting your device (nothing will be lost) to see if that will get your Touch Screen working again: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays see if your Touch Screen is working.
Best of luck,
GB
Message was edited by: gail from maine -
Iphoto and facebook - most recent photos not showing up in file upload!!
on iphoto, all the photos are fine and the most recent photos i import are in the recent import folder like they should be. i'm trying to upload a new profile picture to facebook but when i go to file upload and then click on iphoto to find the picture, it's not there, along with the rest of the recently imported photos. the most "recent photos" when i go to file upload are photos i imported from september 24, 2009 and i have imported a bunch of pictures after that date that aren't showing up when i go to file upload. i already tried rebuilding my library and all that but it didn't do anything. help?
I just started having this same problem. New events are not appearing in the media browser section of the file upload window. The last event to show up is from October 12th. I tried several different websites and browsers.
They are fine in iPhoto and the files show up in the "All Images" section of the Finder. -
Deleted photo's thumbnails appear in N97's capture...
Hi guys.
As the title said, deleted photo's thumbnails appear in my N97's capture gallery. I capture an image or two and when I go to my Photos > Captured I see tumbnails of images I deleted a long time ago. When I open a file I still see an image that was deleted ower a year ago.
Only when I click "edit" do I see the recently captured image that I should have seen in the first place.
I tried everything. Restore factory settings, delete everything the phone lets me in explorer... still the problem persists. Any ideas on how to fix this?Hi dtbsz,
We're sorry to hear you have been having trouble with this, but here are a few ways to thoroughly get to the bottom of your issue. I'm assuming you're using the defult photo app.
Firstly, connect your N97 using Mass Storage mode. If you have Windows, open up the drive associated with the N97 under My Computer. Before going anywhere, make sure you have your Windows Explorer set to show hidden files as well. Go to Tools > Folder Options > View. Somewhere in there you'll see a branch called "Hidden files and folders". Select "Show hidden files and folders". Hit Apply and Ok.
Now, you'll see in your mass storage drive a folder called "Private". Open Private > 101ffc31. Then delete glxmdstn. Unplug your phone, and re-open your Photos app.
If this does not solve the issue, try the following too:
1) Do a full backup, with user data.
2) Do another full backup, but without user data.
3) Reformat the phone.
4) Restore the data from the full backup with user data.
5) If the problem persists, reformat the phone again.
6) This time, restore the data without user data.
Ensure you have the critical data backed up separately too, instead of relying on NBU.
Report back and let us know about your progress.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
i just updated my software to maverick and my iTunes to the most recent version and i can no longer transfer songs from my iTunes to my iPod. The tracks stay gray with a stagnant circle beside them in the left column. Any ideas?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
I cannot find my photos that I sync'ed from my iPhone4S to my PC. More recent photos no longer appear in the Sync directory. What can I do to properly sync them?
Not sure what you mean by "sync" -- Apple uses the term "sync" for transferring photos from the computer to the phone and uses the term "import" for transferring them the direction you asked about.
For importing to the computer the following has directions (which for Windows 7 links to the Microsoft support site since the transfer is handled by Windows 7 the same as it would import from any camera:) Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC -
I've been using iMovie for a while now to make movies out of mostly travel photos and video clips. I try to vary the time for the photos from 1-4 sec., although most of them are 1-2 seconds so as to keep it short. A friend of mine who saw my most recent product said that this is too short. Any ideas out there?
I apologize for my confusion on your question. I find that depending on the principal of each photo and my target audience to determine the time frame for each photo. It seems most people get impatient with viewing one photo for more than 1-2 seconds if the photo is not complex.
If there are several things that interests the viewers in any one image, they want to look at it a second or two longer. If the movie of images is a training aid, the images may need to be more than 3 seconds. For intro's, or a trailer for a training movie, no longer than 1-2 seconds.
That was a long answer to say, generally speaking, I find 3 seconds to be an average time length. -
In mail, my attachments, both photos and documents, appear in the body of the message. How can I get my attachments to appear as a separate attachment and not as part of the main message???? Thanks for your help, Karen.
softwater wrote:
...and costs $14.99
Yep! And if you absolutely need (or think you need) that functionality, it is worth every penny.
As Don already pointed out, exactly what the recipient sees will depend on how they've set up their machine and what unnecessary 3rd party apps they might've installed to display attachments the way they want.
In theory, that is true. In practice, Attachment Tamer will cause more of your messages to show up as plain-jane icons on the other end. The problem is, after all, people running Outlook 2003 and 2007. These people likely aren't doing many system modifications.
If I were you, I'd use the free solutions provided above, save my money and let my recipients decide how they will handle their mail.
I completely agree. -
SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu -
Ive recently updated my mac to OS X 10.10 and now my CS5 illustrator and photoshop will not open... I uploaded the most recent Java and they still won't open. Please help
Mac,
Nothing shows up here?
https://www.adobe.com/account/my-products-services.html#
With CS5 you must have registered, hopefully under your present Adobe ID.
I am afraid the chat and phone support are off until the beginning of January.
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html
Adobe ID and registration support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-c1.html
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html -
My iPhone 5 is not syncing with my iTunes 11.3, on OSx. I have just completed all of the most recent updates and have looked into completely uninstalling iTunes but I found my computer won't let me! Any ideas?
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Maybe you are looking for
-
What could be causing this ERROR MESSAGE: 10.1000 Supply memory error Reinstall (on a CM2320nMFP)?
-
How to delete conext entries in JNDI tree after undeployment?
Hi, When I deploy an EAR or JAR file with EJBs, they bind in the JNDI server. When I undeploy the application the beans are no longer bound to the JNDI tree, but the contexts they created remain. For example, I deploy a bean that binds its home objec
-
i restarted my ipad today and i could not open the settings so i went to restore the ipad and it wont update to io6 and that causes me not be able restore! any way i could restore without upgrading or what do i do?
-
WLC 5508 Release 7.4.100.0 RADIUS PROBLEM
Hi, Previously I was using 7.0.116.0 and there was no problem on Radius Authentication. Client uses secure V2 After upgrading 7.4.100.0 Radius Authentication Successfull, but Secure V2 continuously opens login page Thanks
-
I had my iPod contrast setting all the way up and it was ok for a while, but now the image is very very faint and I can barely make out what's on it. The contrast is at max, and reacts to being lowered. What's the problem? It keeps getting worse!