Most recent RAW update, New Aperture and Maverick but still Aperture cannot view RAW files from my Sony RX-100 camera.

I have all the most recent Software updates and a brand new version of Aperture but when I connect my Sony RX-100 to my MBP, Aperture cannot view or import the RAW files. It will import JPEG format. I am new to Aperture and would appreciate some advice here. Do I need an old RAW format update or is there something else I need to do here.
Thanks for any help.

Keith, the latest raw support claims to have fixed issues with the RX-100 raw support:
Digital Camera RAW Compatibility Update 5.03This update adds RAW image compatibility for additional cameras to Aperture 3 and iPhoto '11. Jan 16, 2014
This update adds RAW image compatibility for the following camera to Aperture 3 and iPhoto '11:
Canon EOS M2
It also includes fixes that:
Resolve an issue that prevented lens correction from working properly with Sony Cyber-shot DSC-RX100 images
Address a color cast issue on some Olympus OM-D E-M1 images
The RX-100 has been supported since earlier, but the previous raw support has introduced a bug.
itunesisbullshitplopcrapshould update the raw support.
This requires Aperture 3.5. and Mavericks.
Correction: This requires
System Requirements
OS X 10.8.5 w/ iPhoto 9.4.3 or Aperture 9.4.5
OS X 10.9 w/ iPhoto 9.4.3 or Aperture 9.4.5

Similar Messages

Will Elements and Lightroom open RAW files fro the Sony DSCRX-100 camera?

Will elements and l;ightroom open RAW files from the Sony DSCRX-100 camera ?

202daansn wrote:
Will elements and l;ightroom open RAW files from the Sony DSCRX-100 camera ?
I have the RX100 and confess to be an Adobe fan. You did not say which Lightroom or which elements you want to use. You need the latest versions.
Photoshop Elements 11 comes with Adobe Camera RAW (ACR) version 7.0 in place when you install it. Under the help menu, there is a choice to check for updates. If you do, ACR 7.2 installs. The RX100 is included in 7.2. Previous versions of Photoshop Elements will not udate to 7.2. When you open a RAW photo, a screen pops up that lets you adjust, convert and save to something Photoshop Elements can handle.
You have to have Lightroom 4.2 to get RX100 usefulness. Lightroom uses, but hides, the ACR engine. Instead the slider controls are built in the user interface. When you buy it, it installs as 4.0. The help menu also has an update choice so that you can get to 4.2 from 4.0.
You didn't ask, but Premier Elements 11 is a good choice for video because it is he first version that "officially" supports the high quality 1080p60 or "PS" setting in the RX100.
On T day, I shot RAW photos of my granddaughters dancing to a Wii game in terrible light. Yesterday I "adjusted" the batch of RAW shots taken with the RX100 in Lightroom and saved them as .jpg files. Today, I wll make a video in Premier Elements from those .jpg images, put in some pan and zoom effects, add a sound track and put it on Vimeo.
My view is that an RX100 owner needs PSE 11, PrE 11 and Lightroom 4 to take advantage of the camera's capabilties. Setting it on "fine" .jpg and uploading snapshots to Flicker leaves an awful lot on the table!
Bill

Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi

I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
In OS, when the image is selected no preview:
Lightroom error:
Bridge, no preview:
Photoshop error:
Ideas, suggestions?
66 views on this discussion so far and no replies...
Please help.
Thanks in advance,
Arthur

Something appears to be wrong with your files.
Are most of your images approx. 3.7 MB?
This is very small for a 12 MP image.
If you go back to the original file on your laptop, what is the file size?
Also the fact that the Mac OS is not showing the preview is unusual.
Perhaps these files got corrupted when they were moved to your new computer.
Can you open these files OK on your old laptop?
Is the OS showing the previews on your old laptop?
Also compare the file sizes between old and new computer.
Have you tried repairing your permissions?
Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
Good Luck!

After updating Bridge & PS, still unable to view CR2 files from Canon M3

I cannot view CR2 Raw files from the Mark III on Bridge CS6 and Photoshop CS6 to convert into TIF and JPG files for a client. I have updated all of my Adobe programs, restarted, and the files are still not showing up for me. Help please!

Thank you for elaborating.
Your system should absolutely be opening those files. Any of the versions of ACR (Adobe Camera Raw Plug-in) that run with Photoshop 13.0.6 can and will open those files if properly installed, that includes the current version, ACR 8.6.
Go to About Plug-In > Camera Raw… in the Photoshop menu and see what version shows up there, just to check that the plug-in is installed correctly. There should only be one version of ACR in the plug-in menu.
That Canon camera model has been supported ever since ACR versions 6.7 in CS5 and 7.1 in CS6.
If ACR only shows once in the plug-in menu and you still cannot open your file(s), then you in all probability have corrupted files.
The fact that you can see the images in Apple's Preview means nothing, only that Preview is showing you the embedded JPEG preview embedded in the file. Such JPEG previews generally do not get corrupted even if the raw file has been corrupted.
I hope you have the original CR2 files or good backups.

Did most recent Audio update to OSX and Mail.app went insane.

I switched to the Mac in... November? and have absolutely loved it. This has been my first catastrophic experience thus far and I'm used to Windows being a part time job to manage so I'm not complaining.
However, late last week OSX installed an audio update of some sort and when I rebooted mail.app had seemingly lost it's mind:
1. IMAP accounts constantly go offline and then back online at random time intervals. This problem I actually had occasionally before but now it's a constant annoyance.
2. Frequently getting "The message from "somebody" concerning "something" has not been downloaded from the server. You need to take this account online in order to download it." error message for messages that have a. already been downloaded and b. who's accounts are showing as online. FYI, yes I do have mail.app set to download and keep a copy of the messages locally.
3. Some messages (I can't find a pattern but it's about 5% of the messages) download repeatedly and appear in the inbox as many as 51 times. The only solution to this seems to be to log into the IMAP account's webmail access and delete the "offending" message.
4. An account can be online and yet not show all the messages that are in the inbox. I know this because if I log into the webmail I can see them.
5. Seemingly randomly the rules are ignored. Typically I can select a message and then tell mail to apply rules and then it works but why didn't the rule happen on it's own as usual.
6. The general "Inbox" sometimes doesn't show new items in the individual account inboxes until I go and click on those individual account inboxes and then come back to the general inbox.
Info about my system/setup:
a. I have 4 IMAP accounts.
b. I store messages on the IMAP server.
c. The "fullest" IMAP account has roughly 500 MB in it but is set to have 2.4 GB capacity on the IMAP server. That account also has 48 personal folders on it, and has had them for a little over a month. After reading about smart folders, I intend to consolidate many of these into an "Archives" folder.
d. The other IMAP accounts are each set to have 1+ GB of available server storage but each have under 100 MB used.
e. I use SpamSieve for email (love it, by the way)
f. I have a demo of MailTags running (it's been since mid-June and I've only played around with tagging a few emails so far but I intend to use iGTD once I get Mail back under control)
What I've tried:
1. I read that it's better to do the consolidated updates than the incremental ones so three times now I've tried to download the consolidated OSC 10.4.10 update but it never fully downloads. I'm not sure what's the deal with that as I've downloaded 300-400MB files over my internet connection at other times without difficulty.
2. I read that you can delete the folders in mail.app and let it rebuild them from the IMAP folder... a. from what I read, I'm not clear on the procedure for doing this safely b. I have a lot of folders to deal with and c. the only places I've read about it is from people commenting in forums that it didn't help them.
So... any suggestions?

At least one of the problems you have appears to be some index corruption, and I have the feeling that MailTags has a bearing on it. I don’t think you’ll be able to completely solve the problems you have without uninstalling that first...
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all the mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Given the amount of mail you have on the server, I expect it to take a fair amount of time for Mail to fully re-create the index and bring all the mailboxes back online. Again, I strongly encourage you to uninstall MailTags before doing that.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

I recently purchased a new radio and installation but did not receive my installation card

I need my Installation card

Hello Steven,
Welcome to the Sony Community Forums.
Can you please provide the model of the receiver you purchased?
Much of what you are asking for, including dimensions, and in many cases an install guide is listed at esupport.
http://esupport.sony.com/US/p/select-system.pl?DIRECTOR=DOCS

Got a new MBP with Mavericks but still prompting to download Mavericks in App Store

I'm not sure if I have to download and install Mavericks again on this machine but this is a brand new late october MBP with OS X 10.9

You don't need to download OS X Mavericks because you are already using it. The only purpose to download OS X Mavericks would be to create a USB drive with the Mavericks installer in case you want to reinstall Mavericks in the future

I recently purchased a macbook pro and i am trying to put some camcorder footage from my sony vx 2000 onto iMovies. for some reason i cannot import or capture any footage from my camera and tapes onto the imovies. i have the 9 to 4 inch pin firewall cable

i have a sony vx2000 and a macbook pro and i obtained the 9 to 4 inch firewall cable. my issue is that cant get any footage from my vx2000 to my imovies. i have looked up how to do it online and they make seem like you just plug it in and go its all golden. but not for me what am i doing wrong it does seem to be recoginize that my camera is even plugged in and no way letting import of capture any of my footage to my imovies. please help

The camera must be plugged in to AC power (not batteries only). And generally, the camera should be set to Play mode, not recording mode.

I added a new phone and synced but all of my original music is gone ...$100's of dollars worth! How do I get it back?

How do I get my music back after syncing new phone?

Hi. I don't think this will help much but I am having major probs with itunes. I think it is itunes itself. I cannot contact them as that doesn't work either....

Most recent software updates and issues with XP servers

My company had issues with the June 2006 software updates to the Macs and resulting incompatibility with an NT server. I am curious if anyone knows of any issues resulting from employing the most recent software updates to Macs and any compatibility issues then arising with XP servers.
G4 40G iPod Mac OS X (10.4.3) jacked up G4 533

no answers found

Using Aperture 3 and Lion I can no longer view .mov file

Using Aperture 3 and Lion I can no longer view .mov files from a Canon G11. I get a thumbnil which is a triangle with !. If I right click I can open it with Quick time. I cannot import any of the files into iMovie as it does not recognize them in Aperture or iPhoto. From other dicussions I tried removing 3ivvxVideoCodec.componenet from Quiktime Library and retarted with no success, so iI restored the file.

You are welcome;
there is another problem with videos, that might apply in your your case, when you reimport the videos, after you deinstalled the codec - the location you are importing from, and the permission settings, see this post:
Re: Aperture cannot read newly imported video since Lion upgrade.
Regards
Léonie

Since the most recent Firefox update 3.6.8 by banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you g

Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox update

Hello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results.

Recently I updated to Maverick -- I also updated Numbers, Pages and Keynote. NOW, I cannot open my pages documents. I get a message that I need a newer version of Pages. I have the newest version (5.2). How do I get around this to view my documents?

Recently I updated to Maverick -- I also updated Numbers, Pages and Keynote. NOW, I cannot open my pages documents. I get a message that I need a newer version of Pages. I have the newest version (5.2). How do I get around this to view my documents?

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Peter

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Since the most recent Firefox updates, I am having trouble with certain features on The New York Times website; I can no longer see certain weblog comments, or post comments, etc.

This question is admittedly a little complicated. The New York Times website has a number of weblog pages which include brief stories followed by space for readers to leave comments. You probably need to be a Times On-Line subscriber to really see what I'm talking about, but some examples would be this City Room blog: http://cityroom.blogs.nytimes.com/2011/09/02/bloomberg-cancels-radio-talk-amid-furor-over-aides-resignation/ or this Arts Beat blog: http://artsbeat.blogs.nytimes.com/2011/09/01/theater-talkback-remembering-jerry-leiber-a-reluctant-pioneer-of-the-jukebox-musical/
Since the most recent Firefox updates, when I view these pages, which traditionally have a number of reader comments at the bottom of the Times' story (or at least a space to leave a comment), I can no longer see the comments. There's simply empty. blank space. I know that the comments are there; if I open Internet Explorer and log on to the same page, the comments are suddenly visible. I don't understand where this problem has come from. I haven't noticed whether I'm missing seeing anything on other websites yet.
I also cannot post comments on other parts of the Times website; while the pages dedicated to story-specific reader comment seem to load correctly and the space to type my comment does appear, I can't actually submit the comment. Repeated pressing of the "submit" icon has no effect. Once again, this works normally in IE.
For the record, in the past week, I have changed my computer's anti-virus software from McAfee to Norton 360. I run Windows XP. If there's any another information I can provide, please advise, as I vastly prefer running Firefox to IE.

If it happens again then try to reload the website or clear the cache and the cookies from that website.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache

Most recent RAW update, New Aperture and Maverick but still Aperture cannot view RAW files from my Sony RX-100 camera.

Similar Messages

Maybe you are looking for