Most recent update changed all font sizes. What is best method to change back to to preexisting Fonts
The most recent update changed all font sizes (smaller). What is the best method to enlarge?
yeah, that's what I ended up doing late last night because the white font against pale gray background was driving me nuts. I hadnt changed anything. been using the same theme for about 4 months but then all of a sudden, like I said, the font color mysteriously changed.
anyway, thanks for your help.
Similar Messages
-
the most recent update resulted in a loss of ALL of my bookmarks. This is not the first time this has happened and it is very disruptive. I tried the steps suggested to find the bookmarks but that failed.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
Font Size what is best option?
Extemely basic question
What font size option is best to use
em
px
or other
cheers
B
http://www.visit-the-coqui.com
If you are thinking of a vacation to Puerto Rico
http://www.thegadgettraveler.com
Travel gadget and other news hereYou're welcome.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"B" <[email protected]> wrote in message
news:[email protected]...
> Thanks Murray
>
> --
> B
>
http://www.visit-the-coqui.com
> If you are thinking of a vacation to Puerto Rico
>
>
http://www.thegadgettraveler.com
> Travel gadget and other news here
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> All of them. Any of them.
>>
>> If you use px, then users of IE will not be able to
resize their text in
>> the browser (for readability purposes) without
enabling the accessability
>> options. All other browser users will have no
problems resizing text.
>> In addition, a px metric is an absolute metric -
this means that it sets
>> the character size independently of any other font
size specification
>> elsewhere on the page. This latter characteristic is
also the case when
>> you use the font size names (xx-small, x-small,
small, medium, large,
>> x-large).
>>
>> If you use any of the other metrics (i.e., percents,
em, en, ex), then
>> you will get a RELATIVE size, that is one that
depends on some 'going in'
>> value. For example, a page that contains an explicit
declaration like
>> this -
>>
>> body { font-size:1em; }
>>
>> will size ALL text (unless otherwise sized by other
CSS rules) at the
>> browser's default size.
>>
>> A page with an explicit declaration like this -
>>
>> body { font-size:.5em; }
>>
>> will size ALL text at half the browser's default
size.
>>
>> These relative metrics can be tricky to use since
they will be part of
>> the inheritance/cascade of CSS styles. For example,
on a page that has
>> these rules -
>>
>> body { font-size:.5em; }
>> #container { font-size:.4em; }
>>
>> any content in the #container element will be sized
at 40% of 50% of the
>> default size, or 20% of the default.
>>
>> If you want your pages to be totally elastic, and
totally accessable,
>> then using a relative font metric if the norm.
>>
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>> ==================
>>
>>
>> "B" <[email protected]> wrote in message
>> news:[email protected]...
>>> Extemely basic question
>>>
>>> What font size option is best to use
>>>
>>> %
>>> em
>>> px
>>>
>>> or other
>>>
>>> cheers
>>>
>>> --
>>> B
>>>
http://www.visit-the-coqui.com
>>> If you are thinking of a vacation to Puerto Rico
>>>
>>>
http://www.thegadgettraveler.com
>>> Travel gadget and other news here
>>>
>>>
>>>
>>
>
> -
Why did the most recent update set all my plug-ins to Ask to Activate and disable an Adobe one?
Firefox update and none of my plug-ins were working till I went and changed them from Ask to Activate to Always Activate. This Adobe Acrobat NPAPI Plug-in says it needs to be updated but when I try it does not update. It returns to the same need to update screen. There is a problem with your latest update.
I did try to update the plug-in. I would not. I fixed the problem by uninstalling the new firefox and downloading an older version and making sure it didn't install the maintenance program. This keeps it from updating. I even tried the 31 beta firefox and it set all plug-ins to ask to activate. Until you can fix this problem I will remain using the older version that works properly.
-
Hello All, yesterday afternoon I just lost all recent updates to my iCal from the last days. How can this possibly happen ??? It may have occured after I chose the Refresh function after I had problems searching my iCal for a particular event. I think my iPhone was also not properly synched in the morning but I didn't pay it much attention and opened iCal on my MacBookAir instead.
How can I prevent this from happening again?
What can I do to restore iCal with the most recent updates?Random glitch. It doesn't matter; if you didn't backup the data, then you can't recover the data.
In the future, for any 'important' data, back up that data regularly. Forward the 'important' text messages to your email. Trasnfer your photos & videos to your computer, etcetera. -
Display changed/overscan not working after most recent update
I'm running my mini through an LG 42" plasma TV using a store-bought HDMI to DVI cable, and I had the resolution at 1344x756.
After I did the most recent update for what I assume was Leopard 10.5.7, my resolution and colour quality changed. Now with overscan on the picture is cropped and the dock is almost out of view when I hover over it, and with overscan off there is a black gap of about an inch framed around my screen. The only change ocurred after I reset the computer post-update. I tried re-installing the update and messing around with the cable connection to no avail.
What are the odds that it was the cable? Is there anything you know of to roll back updates? Has this happened to anyone?I have exactly the same problem, on a Sony 36". With overscan on, I can't see the menu bar at the top of the screen, and lose a lot of the dock. By turning overscan off, and fiddling the display settings on the TV (altering area to -2) I can get it so it uses up more (tho still not all) of the screen, with all the bars etc.
I could live with this, however it also seems to have screwed up the res. No matter what setting I use the fonts look fuzzy and hard to read. The tv screen was never quite as crisp as the monitor on our iMac, but I could read an e-mail without feeling nauseous.
Hoping Apple will fix this.... -
After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.
ddmathias, I want to make sure all services are working correctly on your phone. What GPS services were you using before the update happened? What kind of issues are you having with the services? Do you get any kind of errors? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport -
What is the max clob length for Forms 6i with most recent updates.
I am trying to determine what the largest clob is that can be handled by Forms 6i with the latest patches installed. I have searched the forum and the help files and have found a bunch of different answers, but nothing useful - nothing current.
I have a record that has a clob field with 28,213 characters (including spaces) or 9902 characters (without spaces). Saved as a text file, it is 29kb.
To read and work with the data in Forms, I have to set the DATA: Maximum Length to 110000, almost 3 times the length of the actual data. I can read and edit the field without problems.
My questions are:
1. what is the maximum size of data in a clob field that will work with Forms 6i and Oracle 10R2 database (Forms with the most recent update)?
2. what is the Maximum Length - It certainly doesn't seem to be character. How do I set this - 3x Actual????
Thanks for the help
GlennIn theory it should be 64k bytes. In practice its often a bit less than that.
-
My iPhone 5 is not syncing with my iTunes 11.3, on OSx. I have just completed all of the most recent updates and have looked into completely uninstalling iTunes but I found my computer won't let me! Any ideas?
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?
That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial. -
Tried updating my iPad2 with the most recent update and now it is saying that I have to connect to iTunes and restore my Ipad2, what happened? Did I lose all my stuff that I had on it?
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
I downloaded the most recent update to iTunes, and now all my songs are gone and my library is empty
I downloaded the most recent update to iTunes, and now all my songs are missing. My library is completely empty.
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I have downloaded the most recent updates on my computer to Photoshop and to Bridge and I am still unable to open images in camera raw to edit them. When I try to open the "Camera Raw Preferences" in Bridge, nothing happens. Could this be a problem with my computer and not the software? Any advice would be GREATLY appreciated.
Sorry, I cannot take your word for your "the most recent updates". Very often users think they have the latest and greatest and it turns out they are wrong.
Please specify EXACT version numbers.
Also, more info is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
My husband and I did the most recent update. Now when we send messages to each other we also receive a duplicate of the message to ourself, what did we do wrong?
Check to see if you are both using the same Apple ID for iMessage. If you are, one of you should go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. (You can continue to share the same ID for other services such as iTunes.)
-
What is the most recent update to iPhoto? I am transferring my library from a remote drive to my macPro, using iPhoto library manager, and get a message that the pictures I am transferring are in iPhoto 9.5. My computer has 9.4.3 and it says my software is up to date.
iPhoto 9.5.1 is the most recent iPhoto version. However, iPhoto 9.4.3 is the last iPhoto version for your OS X version. If you want to use iPhoto 9.5.1, you need to upgrade to OS X Mavericks. You can download it from the Mac App Store.
Make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com
Maybe you are looking for
-
The Text Tool is not working in Photoshop CC
When I try to use the text tool nothing happens when I type even though the font size is 12, and the color is black, on a white background, and then when I try to get out of the text tool a progress bar shows up that says "Rendering type", and the pr
-
How do I create more than one ipod account on one computer
I have an eighty gig ipod and just recently bought a Clip and want to sync both to my music is it possible. If not how do I create two accounts on the same computer?
-
How do you reduce file size of a PDF if Save As doesnt work?
I have been trying to reduce the size of a PDF, using the Save As > Optimized PDF method. I have also tried Save As > Reduced Size PDF. This is on a file made up of 20 pages of full page Jpegs. (These were generated by the script in Photoshop that ge
-
Moving to a new laptop - how to move my itunes
I just got a new laptop. How do I move my library of songs, playlists, etc from my old one to a new laptop?
-
ROIDOCPRMS table on R/3 source system: Src. System and Tgt System fields
Hi experts There is a lot information about ROIDOCPRMS on SDN, but I cannot find anything which describes if the name of the BI system should be in a records in the ROIDOCPRMS table on the R/3 system. The documentation (F1) for the source system fiel