Most recent update to Photoshop CC and Bridge breaks use with snow leopard. need previous vsn

The most recent version of Bridge CC installed with adobe's updater killed my systems year long use of Bridge CC so it won't load. I need the previous version. I can't update to 10.7 for technical and other software workflow reasons. How can I get back to the previous vsn that did work yesterday?

I would guess you need to uninstall bridge cc and then reinstall without applying the 6.1 update
(use the uninstaller in /Applications/Adobe Bridge CC)
You can download Bridge CC direct from here
Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
And the Bridge cc 6.0.1 update from here any others you might need
(don't install the 6.1 bridge cc update, because that is the update that breaks bridge on 10.6.8)
All the Adobe CC Updates: The Direct Download Links for Mac OS | ProDesignTools
Be sure you follow the directions where it says Note: Very Important Instructions or the links won't work.

Similar Messages

I can't make the update of Photoshop CC and Bridge

Hello
I've a MAC , update no with YOSEMITE and when I want to update Photoshop CC and BRIDGE , there is an error (without number) and : call adobe support.
Is Yosemite making error in the way of update ?
ths
christophe

Christophe8271 then please check the installation log files for the specific error which is preventing the update from applying. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover.

My hard drive on my Mac Book Pro failed last week. I replaced the hard drive today and had to use my snow leopard disc that came with the computer to get teh thing going. I was running Mt Lion which I had purchased last year on the old dr

The hard drive on my Mac Book Pro failed last week. I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer. I had Mt. Lion on the old drive that I had purchased last year but no boot disc made. I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either. How do I get something to run the software that I had on the old drive?

Unfortunately I lost my life and am trying to rebuild. Isn't the technical era great.
Backup, backup, backup
As a minimum, use 3-2-1 (or even more)
3 copies of your data (original copy counts as 1)
2 different backup utilities/storage formats (protects from bugs in the software)
1 copy off-site (protects against theft, fire, and natural disaster)
More backup copies are even better.
Backup disks are cheap compared to the lost of personal data that does not exist anywhere else.

Installing Lion and formatting my Mac (with Snow Leopard)

Hey everybody!
I have a MacBook Pro with Snow Leopard.
I want to install Lion from the App Store and format my Mac. How should I do it?
Thanks!

Aha!
The proper way to "clean" a computer before selling it is to zero the hard drive. This will make all your data irretrievable.
Steps for zeroing the drive Disk Utility:
1. Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key until you see the spinning gear.
2. Once started up from CD or DVD, choose Disk Utility from the Installer menu.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3. Choose the entire disk (top icon).
4. Choose erase tab.
5. Click on Options
6. Choose "write zeros".
7. Erase
This will take a bit of time because the computer is physically writing zeros to each block.
You should then re-install the original OS from the system disks and deliver the Mac to the new owner with the system disks that shipped with it.
If you want it to boot as new at startup, do the installation of OS X and follow the onscreen prompts until it asks you to enter a username and password to create your first account. Quit the installer and shut down the system. The next time the system is powered on it will display the same welcome message and be ready to setup OS X.
Or you can delete the AppleSetupDone file.
rm -rf /var/db/.AppleSetupDone

Can I use photoshop cc and bridge without using lightroom

Generally i prefer to ignore lightroom and start from Bridge. I am currently using CS5. Said another way, if i purchase PS CC do i have to use lightroom?

Yes, you can use Photoshop+Bridge without using Lightroom.
You can subscribe to the Photography Package for $9.99/month, use Photoshop and Bridge and ignore Lightroom.

Time Machine and Disk Permissions + Compatibility with Snow Leopard

I have received warning from Disk Utility that I should repair permissions as several files show incorrect permissions and, more than that, my 750GB shows "769GB available".
My questions are:
1. If I use Command+R and rebuild the disk from a Time Machine backup, will permissions be reset or will the files just be copied as they are now?
2. Is there a way to verify the TM backups to check the files therein?
3. Suppose, just for the sake of an exercise, that I reload Snow Leopard; can I still use SL's Time Machine to read a Lion Time Machine backup?
Thanks in advance for any advice you can provide!
Fernando

Why are you repairing permissions? It's a waste of time unless you have a specific reason to do it, and the warnings don't mean anything.
To verify your Time Machine backup, proceed as below.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo tmutil compare
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Synching Address Book and iCal to iCloud with Snow Leopard

My Macbook Pro is not capable of upgrading to Mountain Lion, as it only has a 2.16GHz Intel Core Duo processor. Ever since Apple retired iDisk over the summer, my Macbook has not been able to sync the Address Book or iCal with iCloud's Contacts or Calendar. I am still running OS 10.6.8. Does anyone know of any way to get Snow Leopard to sync with iCloud?
Thank you!

I am at work right now and don't have access to my Mac. But I need to as if your Dad is on Windows Active Directory network? I also found these directions for Princeton's 2010 Exchange that might help. Did he set up the Address contacts & iCal Calenders were enabled when setting up the account in Mail?

Photoshop Bridge CS6 is not operating properly after most recent update to Photoshop CS6.

I updated Photoshop CS6 (through Adobe Creative Cloud) a few days ago. Since the update, Bridge does not show changes in the images when viewing the thumbnails. Opening in Camera Raw does show the changes. But this outcome negates the purpose of Bridge. I want to see the changes made (to the Camera Raw files) in the "filmstrip" thumbnails without having to open each file individually.
Other problems exist. The icons for rotating the images are grayed-out. Even worse, the vertically oriented images are shown as being horizontally-oriented.
Can anyone offer help on this problem?
Thanks
Jim H.

I am on the Adobe Download Assistant. It was stuck at "less than a minute" for an hour and a half, showing that the installation was basically done, since the installation bar was full. But it was stuck. Now it has stopped all together, and is restarting the download from scratch.
Apparently it does not save the download, or only saves a small portion.
c:\adobe/CS6MasterCollection/MasterCollection_CS6_LS16.7z.adadownload
It is at 85.6 MB, even though a short time ago it was close to 99.9% done with the 6,352 MB download.
My internet connection is fine, all is working, and I am able to browse, etc.
I have been careful to keep activity minimal on the computer, so as to avoid conflicts.
The conflicts are with the Adobe Download Assistant.
I amabout ready to just give up, and look for alternatives.
Please help.

I downloaded the most recent update to Itunes yesterday and now I can't play any music. It just sits still. The play button is pushed but nothing will play. Any help?

So frustrating!!! Nothing will play since the update. I've also tried to import CD's and I can't tell if that even worked.
I'm not happy with this update!!

PLUS I'm also having issues syncing with my iphone!! Nothing transfers over.

Safari is not keeping me logged into websites. Problem only began after most recent update (Yosemite 10.10 and Safari 8)

Since updating to Yosemite 10.10 and Safari 8, Safari has not worked properly. Safari used to automatically log me in to websites like amazon.com, Facebook, google, etc. I would click on the bookmark, and I could immediately start browsing. Now, I need to click the link, then click the username box, click on my username which autofills, and then login. Any help would be greatly appreciated.

Alright, well again I was able to resolve this on my own. Not sure how though.
I started accepting the "Do you want to store this password..." requests and they started to stick finally. Facebook stays logged in now, even after quitting Safari. I've just upgraded to 10.5.8 and Safari 4.03, everything seems to be fine (knock wood). Marking this SOLVED for now.

I did the most recent update for Apple TV and now it won't turn on.

Screen is displaying that I need to connect to iTunes. iTunes is not picking up the device.

Did you follow the instructions exactly? Disconnecting all cables, then connecting micro usb? Make sure to conect directly to the computer instead of using ports on a keyboard or USB hub.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

LaCie eSATA update/driver for use with Snow Leopard

is there one? I really need to work at the speed of SATA and this is killing me!!!! HELP!!!

Director wrote:
No disrespect to you but obviously that's been attempted or I wouldn't be here.
No disrespect to you personally but we have no way of knowing what you might consider obvious. As often as not, when someone neglects to mention what they have already tried to solve a problem in an initial post, it turns out that they have overlooked trying something many of us would consider obvious, so experience has taught us to start there.
Beyond that, a lot of users are apparently just too lazy or lack the skill to look for answers on their own, not even bothering to search these forums for existing discussions relevant to their issue before firing off a terse post much like yours (lots of extra punctuation & some all caps shouting for emphasis but little info). That sort of thing strongly suggests that they haven't tried the obvious, whether it is true or not.
As it turns out, if you search this forum for "eSATA driver" you will find some very relevant topics in the top results, so you might want to check them out now.

Newest Photoshop CC And Bridge CC Updates Fail

My Creative Cloud app says that I have updates to Photoshop CC and Bridge CC to download, but the updates fail. I get the following error message "Unable to extract the downloaded files. Press retry to download again (U44M1I210)" When I press retry it always fails with the same error message. I tried signing out and back in but it still fails. Each time it fails the progress bar starts at 50% and fails. I am on Windows 7 64 bit and the current version of Photoshop I am running seems to be 14.2.1 and Bridge 6.0.1.6 x64. Thanks for any help!
Howard

Found the solution by looking up error messages on the forum. Have to delete the AAMUpdater file and then retry the doenload and it worked. Hope it helps someone else!

After most recent update, Firefox keep hanging intermittently with "Not Responding".

After the most recent update, my Firefox browser begins to hang intermittently with "Not Responding". I have checked the extensions and plug-in like Java, all of them are the latest updated ones. Everytime I open a new site or click on links to load another page, it happens. Every single time.

'''is there a solution ''(temporary OR permanent)'' for this problem yet?'''
i tried '''EVERY possible alternative'''; even when opened in ''''''safe mode'''''' or when installed for the first time w| '''NO addons or ANYthing else''' but the '''original default settings''', still does the same thing.
mozilla people?? really?? no answer|feedback|suggestions, anything at all from u guys??
if it isnt a version (browser, OS, addons, etc) issue, what is it that separates us from the users not having the problem?
this is is very frustrating; h|e it's even more frustrating when there is no response from tech support. is it because there havent been enough people who have reported this same issue so there can be some interest & find a fix; OR is it that u dont know; OR that there is not & will not be any fix?
we cant continue being users if we cannot use it. it's really my favorite browser, but if it doesn't work & u guys dont have a fix for it, then users w| this same problem wont have any other option but to switch to a different browser permanently.
really mozilla??? nothing? a reply would be very nice...

Can't close or minimize browser after receiving most recent update

As several others have pointed out, since the most recent update, my browser minimize and close buttons do not work. This is not a malware issue, as you are trying to get out of trying to come up with a fix for this. I have no malware on my computer, and everything worked fine until you did your upgrade. Please fix this, or I will be forced to revert back to Internet Explorer. It closes and minimizes just fine!

Is the Firefox window maximized?
If that is the case then the tab bar can be at the same level of those buttons and prevent them from working properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You could also try a different Windows theme and/or disable Aero (transparency) to see if that makes a difference.

Most recent update to Photoshop CC and Bridge breaks use with snow leopard. need previous vsn

Similar Messages

Maybe you are looking for