Mostly tables in process or scheduled for a longer period of time

Hi Folks,
I am a newbie to SLT. Sorry if I ask some basic stuff.
I am using HANA and SLT and can see below list of tables are in state or 'In Process' or 'Scheduled' for couple of days.
For one of my Ztable its says 'scheduled' in HANA and trigger state is DEACTIVATED in SLT.
Now what I want to do is delete the same from HANA and replicate it again but I am not able to do.
Below are the list of the tables which are creating issues,
I am attaching both HANA as well as SLT screenshots.
Kindly let me know the approach needs to be followed to solve the issues.
I have one more query , I am trying this on my home HANA system but in projects
will loading of data or migrating of tables from ECC to HANA will be done by BASIS guys or by HANA developer?
By profession I am ABAP as well as HANA developer.
BR
Sumeet

Hello sumeet durgia
Now what I want to do is delete the same from HANA and replicate it again but I am not able to do.
Remarks:
Sometimes, the UI side does n't seems to be working as expected in the Hana studio side.
Did you try this:
SLT System -->  LTRC -->
Stop and restart again.
BR
Prabhith

Similar Messages

  • I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button)

    I have a problem with my new ipad air 64g with cellular. When I off my ipad for a long period of time ( around 2 hours), my ipad air freeze. Nothing is showing on screen with any button except by pressing reboot (home   on/off button). Anyone out there can help. Thanks.

    I have a 64GB iPad Air WiFi+Cellular (Verizon), and I don't see the issues you are describing.  First I would suggest that you update your iPad to the newest iOS update.  If that doesn't help, then you may want to schedule an appointment at an Apple Genius Bar.  If you go this route, I suggest that you let the iPad sleep for long enough for the problem to arise before you go to your appointment.

  • I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

    I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

    Hi Jennee,
    You're using the Save As > Microsoft Word command in Acrobat (and what version are you using)? At what point does the status bar in the lower-right corner hang up (Pre-processing, Recontructing, and so on)? What type of content is there in the PDF, and how large is it? Are you having Acrobat run OCR on the file as it converts (you can check this by clicking Settings in the Save As dialog box)? Do you have trouble saving other PDF files as Word documents?
    A lot of questions, I know. But I need to know a bit more about the document to determine why it's hanging up on export.
    Thanks
    Sara

  • How can I record multiple signals for a long period of time?

    Hi, everyone
    I am new at labView I just recentlyl started using it. Right now I am working on this assignment
    that I have to display en record six different signals comming up from a DAQ. so basically What I did
    for my IV is placing a whileloop. Inside the while loop I set up the DAQ assistant and then I send that
    to a split signal function in order to split the signas that are comming from the DAQ ( so those signals
    are EMG1,EMG2, blood flow1, blood flow2, blood pressure, and AM stimulation) after I split the signals
    I send each individual signals to a waveforme graph, but my problem is that I need to record those individual
    signals for a long period of time every second for about 8 hours. so it will be really helpfull if someone can
    guide me through this. Thanks
    Regards

    Hi,
    With your while loop, you'd better use low-level VIs to write your data to a file. Please see attached...I've used text file function but if you need ta save a large amount of data, you may need to use binary file functions instead (nearly the same way to perform this whatever you chose text file or binary file function).
    Best,
    J.
    Attachments:
    RecordData.vi ‏27 KB

  • IPhone 5 won't stay connected to wifi for a long period of time?

    iPhone 5 won't stay connected to wifi for a long period of time?

    Hi Asdghyvbji!
    I have an article for you that should be able to help you troubleshoot this issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    You may also need to see this article about wireless interference for further troubleshooting on this issue:
    Wi-Fi and Bluetooth: Potential sources of wireless interference
    http://support.apple.com/kb/ht1365
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Sleep Light on for a long period of time during some startups

    Sometimes when I boot up, my MacBook Pro's sleep light stays on for an extended period of time and the screen, boot noise, and optical drive check and so on don't happen until it turns off. Why does it stay on longer sometimes than others?

    check under the system preferences > energy saver > on the top of the page there is a timeline to set the time your mac will stay in standby before going to sleep, and that could be set to "never" which would prevent your computer to go to sleep mode

  • My MacBook Pro is hanging for very long periods of time whenever I try to perform any functions.

    Hello Collective Wisdom,
    I have a MacBook Pro from mid-2009 and have recently experienced some problems. There's an above-average bootup time, and whenever I try to perform any functions (say, open a browser window, go into Finder, launch an app, try to type a URL, search for anything), the Spinning Ball of Death comes up for about 5-7 minutes before the function resolves.
    I've been able to get into Disk Utility and it suggested I use Command + R at the bootup screen to do a HD Repair, which I did. But the problem is still occuring.
    What do I Do?

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How  long to leave plugged in to charge ipad mini? should ipad mini be powered off when not being used for a long period of time (several hours between usage times? Please respond this ipad mini is new and I would like to keep it in good condition.

    How long should you leave an ipad mini plugged in to charge? How low should the battery be? Should I power it down when I am not going to be using it for several hours between uses? Thank you. I NEED to know these things.

    About iPad Batteries  >  http://www.apple.com/batteries/ipad.html
    ssutton709 wrote:
    How long should you leave an ipad mini plugged in to charge? How low should the battery be?
    Charge it when you see the Low Battery Alert. It is not recommended to Fully Discharge the battery.
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    ssutton709 wrote:
    Should I power it down when I am not going to be using it for several hours between uses?
    This is not necessary.
    Most importantly... Enjoy your iPad

  • My phone was being very slow and i thought turning it off, and back on again would fix it. It turned off but now won't turn back on, except the apple appears on the screen and stays there for a long period of time. Someone help D;

    /.\

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • TS4268 My iPhone 4 iMessage has stopped working so I switched it to off and switched it back on but stays on activating iMessage for a long period of time and it says it is u successful to log in, how can I get iMessage to work again?

    Can some people give me advice on how to fix my situation? My iMessage wasn't working yesterday so I turned it off and back on and it's said it was activating iMessage and now it is not logging in and it comes up with log in unsuccessful and I depend on iMessage back I use it on my iPhone an iPad and it doesn't let me use it on my iPad either.

    It is probably still worth while taking it to an Apple store for a possible OOW replacement and let them make the decision, as it was broken before the OP took the back off.
    See note below...

  • HT3964 My iMac turns on and a white screen appears with the mac apple and the wheel just sits and spins for a long period of time. Any ideas?

    My iMac turns on. A white screen appears, then a apple appears, then the wheel starts to turn but my computer never boots all the way on?

    Please carefully read Apple's Gray screen appears during startup advice letter for steps on how to troubleshoot the issue.

  • Stopping Process Chain schedule for just one day...

    Hi,
    Our source systems and BI are getting a patch upgrade during this weekend and I need to stop all the Process Chains schedule for Friday night/ Saturday morning. Is there a simple way I can stop all the Process Chains from executing just for tomorrow instead of manually removing each PC from schedule and again putting them back on schedule on Saturday?
    Thanks,
    Sri.

    Hi
    You can reschedule them instead of de-schedule and schedule back.
    1)open your process chain in rspc1
    2) goto planning mode
    3) right click on start --> display schedule job
    4) select the job --> in menu bar --> click on first one from left --> change
    here change the dates as per your requirement and save the job.
    If you have any event based chains which are going to start after time based chains gets complete, no need to de-schedule as we are not going get trigger from time based chains.
    I don't think so we have any program to de-schedule all the chains at a time.
    Regards,
    Venkatesh

  • Schedule a task for a given period of time

    Hi,
    any body has an idea how to schedule a task for a specified period of time. e.g A program keeps on asking for your name to be input for an hour and then start doing something else?
    /bob

    hi friend,
    Why don't you try using a TIMER. Try using this code
    Timer timer = new Timer((TIMER), new ActionListener()
         public void actionPerformed(ActionEvent ae)
    // perform your task here...
    timer.setInitialDelay(TIMER);
    timer.setRepeats(true);
    timer.start();
    I think this will work fine.
    Bye,
    Ravi.

  • Material stock received and issued for a given period of time

    HOW to get the material stock received and issued for a given period of time including the open orders.
    if there is any BAPI Available then please tell me. or give me the table relations thaks.
    thanks inadvance

    hi friend,
    Why don't you try using a TIMER. Try using this code
    Timer timer = new Timer((TIMER), new ActionListener()
         public void actionPerformed(ActionEvent ae)
    // perform your task here...
    timer.setInitialDelay(TIMER);
    timer.setRepeats(true);
    timer.start();
    I think this will work fine.
    Bye,
    Ravi.

  • Import Items Request remain in Status Pending Normal For a Long Period

    Hi,
    Import Items Concurrent Requests Remain in Status Pending Normal For a Long Period(30 minutes) Before Running.
    It is actually completing within 10 minutes after pending normal for 30 minutes.
    This problem is happening only with Import Items concurrent request, Other request are running as soon as they started.
    My Application version: 12.1.3
    Database Version:11.1.0.7
    My Standard Manager details Processes=16 Sleep Time=10 Cache=40
    Please correct, If there is need to change Standard Manager configuration...
    Plz reply soon.
    Regards,
    Alig

    Alig,
    Standard Manager is running this request, Import Item program request after the completion, creating Item categories for this it is taking time, that is the reason another import items request is waiting for the Item categories program to be completed.You need to find out why the "Item Categories" takes that long to complete.
    Do you have the statistics up to date?
    Enable trace as per these docs to find out why the request takes that long.
    How to Set a Trace with Bind and Waits from the Concurrent Request Form [ID 601647.1]
    How To Trace a Concurrent Request And Generate TKPROF File [ID 453527.1]
    Thanks,
    Hussein

Maybe you are looking for