Motherboard compatibility

Hi in there, I have motherboard msi z77a-g45 gaming did MSI GTX 980 compatible with it please any help

If your motherboard is running latest BIOS then there should be no problem with that.

Similar Messages

Sdram motherboard compatibility

I want to buy two PQI 256MB sdram cards for a machine, but I am concerned about compatibility problems. Do you think the ram will work with an Award motherboard produced in 1998, and a Pentium3 800mhz? anyone with a similar setup?

I have a Soyo board with a PIII 866mhz and two sticks of SDRAM; runs without any problems. Not sure if that helps at all.

HP 630 motherboard compatibility

Hello,
I have might have ton replace the motherboard on my HP 630 notebook with an Intel Celeron B810 CPu and I was wondering if boards designed for Core i3/i5 CPUs would be compatible? I haven't found any good Celeron boards i
online.

Hi Speedbird737,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP Laptop motherboards compatibility.

Hello agin my well experienced HP friends!
I have, at this time, a question about 2 laptops. First, I have an HP DV9910-us. It had Vista, which has been upgraded to Win. 7. Now, I had posted this question before, about the sound issue, This one works well, however, it has no sound. Everything checks out, and I have done the "uninstall, & re-install" the required drivers. Nothing worked.
The popular opinion is that the sound section of the motherboard is N/G. Now, I have purchased an HP DV 9812, with the same components. They are both: AMD Turion X2 64 @ 2.0 processors. The parts one I just purchased, has no LCD in the top compartment section. But, the seller states it works fine on an external monitor hooked up to it. Boots up, and loads Windows.
So, I guess my question is: will the motherboards be compatibile? The do have the same configuration. I am going to only switch out the motherboards from each. Will this be o.k.? Love to hear some opinions!
Thanks for your time folks!
TFL
This question was solved.
View Solution.

Should be compatible. Technically they are both part of the dv9700z model line. Worst case one is "defeatured" and the other "full featured" which might mean you have a port on the chassis that has no corresponding hardware on the board (open hole) or you have something on the board that is blocked by the case and you have to use a dremel tool to open a hole in the case. Might be a stupid question but why swap motherboards? Why not just move the display (screen housing) over from the dv9910 to the dv9812 chassis and leave the motherboard in its housing? Still not an easy job but I have disassembled a few dv9000s and would want to avoid trying to remove the motherboard. Big job. Lots of subassemblies and ribbon cable going all over the place.
By the way I would check this myself (i.e. specs of the two units) but the two model numbers both need the last 2 letters to find correct specs and you did not give it for the dv9812.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Solaris 8 IA SMP Motherboard compatibility

Hi,
I've just got the solaris binaries from Sun. I am looking forward to building a dual-CPU machine for Solaris and Oracle. Most likely it's gonna be DUAL PIII (FCPGA or slot1). I have checked the HCL for popular and relatively inexpensive dual-cpu motherboards (Asus, Abit, Tyan, Gigabyte ...) and infortunately I haven't found them on the list. Is anybody currently runing a dual-CPU machine on one of these boards? If so, please tell me which board and CPUs you are using. I have heared from guys who run Abit BP6 dual-PPGA celerons just fine. But I am looking buy coppermine CPUs.
Thank you in advance
Max

"2.4 Intel processor" smells like a Pentium 4 type CPU. Early Solaris 8 releases don't support the Pentium 4.
Try the kadb patch, documented on the following web page:
http://www.zvenigorod.ru/solaris8x86/p4trick.htm

Question about Satelite P500 motherboard compatibility

hello
I have a Toshiba Satellite P500-14N (part no PSPGSE-00600FGE) with a problem on its Motherboard.
SPS: A000052610
P/N: 31TZ1MB0100
PCB: DATZ1GMB8D0 REV:D
i find a motherboard
SPS:A000052120
P/N: 31TZ1MB0190
PCB: DATZ1CMB8F0
are 2 motherboard 100% compatible with each other

hello again
Will tell you the whole story and maybe we can help with
My Laptop toshiba satelite P500 initially did interupt on the screen when the lid opens and closes .
Then i open it to see what happens. Detected the error in Lcd cable, when i bend it the screen goes black and when i leave it working normally. I Pulled out the lcd flat cable from the motherboard but when i put it again situating wrong with effective to bend the terminals of the connector board and shorting which would burn a transistor in the motherbaord ( pulled fumes from motherbaord and the lcd cable)
I have remove the lcd from laptop and when i pressing the Power buton it lit for 5 sec the Power led and then turn off for 5 sec and it continues if you leave it without loading the operating system
If i put an external monitor, the laptop starts normally and loads the operating system
I looked on ebay and finally bought a motherboard with cable lcd to board
But when placing the laptop and pressed the Power buton again illuminated for 5 sec the Power led and then turn off for 5 sec and it continues if you leave it without loading the operating system
The LCD displays nothing and is black.\
I put an external monitor, the laptop starts normally and loads the operating system
The LCD does not display anything again
What could be wrong
is this motherboard is damaged
damaged lcd
damaged Inverter
damaged graphics card
If one has this model can make the Test to remove the lcd cable from the PCB and test to see if it starts Laptop
If you do not start in his own then definitely not blame the motherboard nor the graphics card
Should then i check the inverter and lcd display
I'm waiting for your help

Powerbook G4 aluminum motherboard compatability.

Hello,
I have a one year old powerbook g4 15" with a dead motherboard. Its processor runs at 1.67 MHz so it should have an bus speed of 333 MHz. If I replace the motherboard with one that has a 400 MHz bus speed, would it work?

Some are interrchangeable; others not. You have a 1.67GHz PB, and I presume you don't want to replace your LB with a slower one. You can't replace it with a faster one, because there isn't any. If your PB has the high-resolution 1440 x 960 display, there's only one LB that makes any sense to use. If it has the older 1280 x 854 display, and you'd like to replace it with the newer one that has more VRAM, call any of the following highly knowledgeable parts vendors to ask whether that will work (phone numbers are on their web sites):
http://www.pbparts.com (parts and repair work)
http://www.dttservice.com (parts and repair work)
http://www.powerbookresq.com (parts and repair work)
http://www.powerbookmedic.com (parts and repair work)
http://www.tekserve.com (parts and repair work)
http://www.ifixit.com (parts and excellent, illustrated online take-apart instructions)

Pavilion G6 motherboard compatibility

I've got an HP Pavilion G6 1202sa which needs a new mainboard.
Current board is model number DA0R23MB6D1 REV D, processor is an AMD A4 3300M.
Can anyone please advise which model number/s of mainboard would be compatible as a replacement (keeping all other original hardware: cpu, mem etc)?
Had a look for this specific number (DA0R23MB6D1), and they seem a little thin on the ground. So is there ANYTHING else which can be used as a direct replacement?
Any more details needed, please let me know.
Thanks in advance for any help.

This is the correct HP Part number for your motherboard:
For use in AMD UMA computer models 638856-001
Order it here:
HP Partsurfer
Your Service Manual
Let us know if you need anything else.
If this is "the Answer" please click "Accept as Solution" to help otherts find it.

T41 install T41/p(FireGL) motherboard compatibility?

Dear all,
Can T41/p (with FireGL graphic card) motherboard install into T41(2373-8RU)?
My T41's motherboard just died weeks ago, and I found a used T41/p board on eBay. Before purchase, need someone's experience to confirm this motherboard are compatible with T41. Heatsink module also require confirm. Thanks a lot.
Solved!
Go to Solution.

Welcome to the forum!
Yes, you can install a T41p planar in a standard T41. You will also need a new "long" heatsink/fan assembly.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

G5 dual 2.0 motherboard compatibility

Would an original (PowerMac7,2) dual 2.0 G5 motherboard work in a june 2004 (PowerMac7,3) machine? I know there are some differences, but are the CPUs and connectors (fans, PSU) and mounting compatible enough to work?

I've just had my computer have the same problem with a faulty logic board being the problem. The local Apple tech said we had to get a service number from Apple to get it fixed. The Apple person (in the Philippines) gave us a number and said go back to our local Apple tech to have him access a repair extension program for the repairs. Are we being given the run-around because the local guy says he doesn't know about this program????

T60 Frankenpad motherboard compatibility?

Hi all
Seems like my loyal friend 15" T60 has died :-(
This had made me looking for a replacement board and after seing a lot of guys in here making Frankenpads with a T61 board in a T60 chassis, I have been wondering what boards are actually able to fit in a 15" T60 ?
Is it only the T61 14" 4:3 boards that will fit in ? Or is it also possible to fit in the boards from a T61 14" widescreen model ?
Thinkpad T500 - C2D P9500 - 8GB RAM - Intel X4500 - 120 GB Intel 330 SSD,
Thinkpad T61 - C2D T9300 - 4GB RAM - NVS 140M - 120 GB Samsung 840 SSD,
Thinkpad T60 - T2400 - 3GB RAM - GMA950 - 60 GB Samsung 840,
And a lot more....
Solved!
Go to Solution.

wide boards do not fit and cannot be modified to fit

MOVED: motherboard compatibility

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=250865.0

https://forum-en.msi.com/index.php?topic=250865.0;topicseen

CPU upgrade on Satellite A60

Hello, i want to upgrade the cpu on my Satellite A60 celeron d345, what kind of processors are supported?
Thanks

Hi
I can not give you any informations about the CPU prices because it depends on the computer dealer.
Mostly the online dealers are much cheaper. So simply use a search-and-compare prices engine in the net.
Now something about the motherboard compatibility:
The Toshiba Satellite A60 is a full size notebook PC based on the Intel Portability P4 processor, providing high-speed processing capabilities and advanced features.
In my knowledge the motherboard should be ale to handle the Intel P4 (Northwood), P4 (Prescott) and Celeron (Northwood) CPUs.
- P4 (Northwood) 2.66/2.8/3.06/3.2 GHz
- P4 (Prescott) 518(2.8 GHz)/532(3.06 GHz)/538(3.2 GHz)/552(3.46 GHz)/558(3.60 GHz)
- Celeron (Northwood) 2.5/2.6/2.7/2.8 GHz
- Celeron (Prescott) 325(2.53 GHz) / 330 (2.66 GHz) / 335(2.8 GHz) 340 (2.93G) / 345 (3.066 GHz) / 350(3.2 GHz)
But note; everything what you do is at your own risk!!

T7900 surround speakers not working. Please help.

I have an Intel DP35DP motherboard (Intel High Definition Audio (Intel HD Audio) subsystem in the following configuration: 8-channel (7.1) audio subsystem with five analog audio outputs and one optical S/PDIF digital audio output using the Sigmatel STAC927D* audio codec) with which i have attached my 7.1 Inspire T7900 speakers. The right, centre, left, and the woofer are working perfectly fine, but none of the other 4, the surround speakers, are giving any sound?
Is it motherboard compatibility?
Is it the OS? (i'm currently running Vista Ultimate SP)
Is is something else? hardware settings in the motherboard driver installations? software configurations? (i haven't seen any signs of anything-'Creative' showing up in the OS)
Do .mp3s play on all the 7 tweeters or only specific formats do?

Hi,
Thanks for the reply. But how do i know that my 7.1 system is running? Play a DVD? Secondly, i thought all the audio songs recorded in studios are made for 7.1 systems?
Secondly, are you sure its not any of the other factors?
I'm still anxious in hearing sound @ full throttle and quality - 7.1! :/
Waqas

MSI tabs in Display properties

whenever i try to use the msi tabs in the display properties i get this error
Run a DLL as an App has encountered a problem and needs to close.
and when i click on the button to see what data the error report contains i get this information
AppName: rundll32.exe AppVer: 5.1.2600.0 ModName: msicpl.dll
ModVer: 1.0.0.1 Offset: 00004261
I am running winxp and have re-installed it a few times to see if that would fix the problem, then i tried taking the card out and putting it back in, but no luck either, I have the newest drivers as well and nothing works,
any idea anyone???

Hi guys,
I posted something about this exact problem...
Hi everyone...
I just bought an MSI GF4 TI-4200 128 and have the same problem. Running XPPro, fresh install. I was running MSI GF3 TI-200 64 before with same OS and had no problems with either the properties and the MSI Live Update 2. Now, when I try and access the MSI properties in the Display properties, I get that same error (see at beginning of thread) and the window will close. When I try and use the MSI Auto Update, I get the vbios.dll could not be loaded or found... (or something similar) and can't use the Update. I "bypassed" the problem by loading the NVIDIA drivers instead of the MSI ones and it works like a charm now...
I am pretty sure that the MSI drivers would have worked anyhow but I have'nt tried them. BTW, I can access the NVIDIA properties no problem!
I will also send a request to MSI to let them know that I am now aware of this "known" problem and am awaiting a fix for this... I will also check with ASUS for a motherboard compatibility issue.
XPPRO fully patched
MoBo Asus P4B-533 (latest bios, 1007 I think)
512 DDR-2100
Sound Blaster 128
Maxtor 40gigs 7200
Intel P4 1.7
PS 300W Antec
etc...etc...
To Moderators: Is there a fix for this and if not, could you let me know (by link, email or post) what could be the problem (i.e.: ASUS moBo.)? I am quite content on using NVIDIA drivers but still, my inquisitive nature is acting up...
I haven't tried yet but will I be able to Flash my VGA bios if I have that problem? (is this VGA card related or a compatibility issue with something else?)

Motherboard compatibility

Similar Messages

Maybe you are looking for