Motherboard is not detecting my soundcard Please he

ok heres what happened, i was flashed my motherboard bios because i was told it would fix a tempereture reading problem(temps where way to high)anyways after i rebooted i noticed i didnt have any sound.As i was reinstalling my drivers i got an error message saying my soundcard wasnt detected.Does anyone know what i can do? I have a SB Audigy 2.thanks

If, "... I was flashed my motherboard bios..." means you updated your bios then you need to check that onboard audio has been disabled in the bios (as enabled is the default). The other thing that your adviser should have warned you about is that playing around with the bios is risky.
If this does not work check that the soundcard is getting power by looking to see if there is a red light in the optical out port. If this is the case the card is possibly toast and you need to buy a new one.
I have experienced this by inserting a microphone in the headset jack and received the same message but in that case the card worked again after a few days of non use.

Similar Messages

My Motherboard is not detecting my vid card at startup! HELLLLP!!

It seems my motherboard is not detecting my GeForce4 MX 420. It makes 1 long and 2 short beeps, and according to BIOSCENTRAL (http://www.bioscentral.com/beepcodes/amibeep.htm) it is a Vid ROM prob.
How do I fix this?? It seems that the PC is working, but the light on the monitor is orange (normally means that PC is shut, when monitor on).
PLEASE HELP ME!!
Iam going crazy, I have to do things, and I cant!
AHHH the specs:
2.4 GHZ P4
256 MB RAM Kingston (2 128MB RIMMs)
60gb 7200RPM Maxtor
MSI Nvidia GeForce4 MX 420 (64MB)
MBoard: Intel D850EMV2
I CANT GET IRQs CAUSE THE MONITOR IS ALWAYS BLACK AS I EXPLAINED PREVIOUSLY!
HHEEEEELLLPPP!!

After further review
I think you have an image until windows boots, am I correct? You can at least see the POST screen and can enter the BIOS correct?
Perhaps the drivers have become corrupted. Try to get into safe mode, then make sure you have the driver version you are currently using available and go to the control panel and uninstall the drivers via the Add Remove programs icon. Restart and re-enter Safe mode and re-install the drivers again.
If you see some progress is being made but still have problems, you may have to use a Driver Cleaner program, you can find info at the top of this VGA forum on that and make sure you read ALL documentation.
Try to think of any changes or programs installed or un-installed prior to this event and let us know.
PS You never told us what OS is in use.....

HP dv4t not detecting hard drive, please help!

Hello, its been just a little over a year since I've bought my HP dvt, and of course the problems start as soon as my warranty has ended.. It's been working fairly fine most of the year, and then just all of a sudden while not even doing anything of importance on computer last week I got a blue screen error..
Ever since then I have had so much problems. At first it just started out with closing the screen and reopening it crashed the laptop in a couple minutes..
The main problem now is, it just does not detect the hard drive when booting up! Sometimes (rarely) it does though.. I thought it was a windows problem, so I did fresh clean install of Windows 7 and reformatted the hard drive. Then I ran CHKDSK and it did it stuff and said volume clean at the end.. It worked perfectly for a couple of hours, was able to close screen and open with no problems. I downloaded "Hard drive sentinel" to monitor my hdd health, and it said 90% which is apparently excellent. Yet as I was installing adobe reader, it crashed, got the blue screen of death and has not been able to boot up since
Can anyone tell what is the problem with it? Anyone else have similar problem? I've tried to reformat again with CD but it doesnt even recognize any drive to install on..
Important thing to note is that, in the BIOS screen when i run the HARD DISK TEST, it does recognize it! So i dont understand why it doesn't load the operating system or cant see the hard drive anywhere else!!
What is at fault even? Is the motherboard dead? Althought the bios screen loads fine so does that mean its OK? Is it the hard drive? CHKDSK and the hdd health monitor thing said it was ok right before the crashes..
Please help, I have my first computer science lab in like 2 days with my laptop breaking just a couple days before it with barely any money left to buy a new laptop

"computer always freezes at 56%"
Time to replace your Hard Drive. BACK UP NOW!!!
This will be the 3rd HD in a new HP HDX 18 for me (6 months old).
Open up the HD bay and take a look at the model of the HD.
If it is a SEAGATE MOMENTUS 7200.4 they are known to fail in as little as 1 month from install, and do not last more than 6 months.
Google the brand and you will see that most people are reccomending that you remove the SEAGATE product ASAP (data recovery is next to impossible) and replace it with something else.
I had just finished setting up the PC as I wanted it, OS, programs / Bios, software upgrades, then without warning the 2nd HD went.
I lost EVERYTHING in my C drive, was just preparing to do a full BU and Mirror Image after deleting both from my D and External Drive.
HP is replacing one piece of crap with another, I will be shopping for a different brand for the C drive after the laptop comes back from repair.
There seems to be no end to this BS with SEAGATE drives.
DO A FULL BU NOW!!!
> Was your question answered? Mark it as an Accepted Solution!
> See a great post? Click on the white star and give it a Kudos!

Lumia 625 does not detect MicroSD cards, please he...

My Lumia 625 does not detect MicroSD cards when inserted.
I have tried powering off/on.
I have tried formating them in my PC.
I have updated my phone to 3050.0000.1334.0007
I have tried a Kingston 64GB SDXC Class10
I have tried a Sandisk Ultra 64GB SDXC Class10
I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
Any help with this would be really appreciated!
Becoming quite frustrated now...

Hi Pepperami33,
Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

ITunes does not detect my iPod-- please read and help?!

I tried all the help Apple told me to do. I reset my iPod(didn't work) and then I downloaded the newest version of iTunes. That didn't work either. My iTunes still does not detect my iPod. The newly downloaded iTunes was at least supposed to tell me that my iPod was "corrupted" but it didn't. So... I'm not sure that it is. But that is the only reason Apple tells you could cause this. So yeah, I'm pretty lost right now! Does anybody know anything to help(by the way, I own a 5th generation iPod nano)? Thanks

Take a look at this web page and see if it helps. Some of the suggestions are ones you say you've already tried, but there are other suggestions, one of which may help:
iPod missing in "My Computer" or in iTunes on Windows
Good luck.

Skype not detecting my webcam, please reply..

Hi, I am currently using the built-in HD Webcam 101 on my laptop for Skype. This is my exact laptop: http://h10025.www1.hp.com/ewfrf/wc/product?product=4229965&lc=en&cc=us&dlc=en&lang=en&cc=us
I've been able to use the video call perfectly fine up until this past week. Skype is not able to detect my webcam at all and on my Device Manager, my HD Webcam 101 says that it is working properly.
I've tried disabling and then enabling it. It works! But, the same issue re-occurs whenever I restart my laptop. Obviously, I don't want to keep doing that procedure just to get it working. Is there anyway you guys can help me fix this issue? It is becoming a big problem because I make a lot of business video calls over Skype. Thanks...hope I get a response asap.

Are you starting Skype automatically when you start Windows, or do you start Skype manually after Windows is already running? If you're starting Skype with Windows, try changing to letting Windows start before starting Skype to see if that makes any difference.
When Skype doesn't detect your webcam, if you click on Tools > Options > Video settings, what does it say in the "Select webcam" box? If you click on the pull down arrow next to that box, are there choices that can be selected there?
If there is nothing that can be selected in Video settings, and since you weren't having this problem up until recently, you can try recetting your Skype configuration files with this procedure:
Quit Skype. Hold the Windows key and type r. In the box that comes up type %appdata% <enter>. Scroll down to find the \Skype folder and rename it something like \Skype_old. Restart Skype.
Note: Renaming the Skype folder will move IM and call history to the renamed folder. They can be recovered with a few extra steps.
Please note: I do not respond to requests for help via Private Message.

P35 motherboard suddenly not detecting IDE hard drive

Hi,
I have a P35 MSI platinum motherboard. E6750 Core 2 duo 2.6HZ cpu, 2 x 1GB DDR2 ram,a standard DVD R/W, a 400GB Hitachi Deskstar HDD, a GTS 8800 graphics card and running Ultimate vista (oem).
She's been running fine for over a year.
Yesterday - I turned her on and although on initial boot up you can see '400GB PATA' , and the MSI loading screen vista won't load and screen is blank.
I put in the vista disk for repair but at the point where it shows your operating system - that space is empty.
So I went into BIOS and the HDD is not being detected at all.
I toggled some of the IDE settings but still no go.
Both my HDD and the DVD R/W are on the iDE ribbon cable. DVD seems to be working fine and, as stated above, HDD has been working fine for a year until yesterday.
Any ideas as to how I can get BIOS to re-discover the HDD? OR any ideas why it isn't being discovered now (after all this time)?
Also - to get everything back up and try to recover some of the data off my IDE HDD I am thinking about buying a SATA HDD, reinstalling windows and working from there. Any reason why this shouldn't work?
Finally - IF that works, I have a number of IDE drives lying around that I'd like to connect up to the MSI p35 - but at the moment the ribbon cable I have only has two connectors (currently used by by DVD R/W and my rebellious IDE HDD). Is it possible to add say 2 more IDE drives? would I need to get a ribbon cable with more connectors? Or is it not possible and IDE cables only come with 2 connectors anyway?
Any help much appreciated - I am not exactly a noob but I have nowhere near the skill levels of some of you guys - really appreciate your thoughts.
Cheers,
TOOTR

Quote
What happened to you might be caused by the case messing up you mobo.
Quote
Different hard drive, see if bios acknowledges the drive is there
Guys, the Drive is properly recognized on BIOS Level...
Quote
It seems to show up in the second screen very briefly - I clearly see '400GB'
Quote
This time F11 worked and I had a boot order choice. I clicked on the IDE HDD (hitachi).
Quote
I can see it is if I try to change the Boot sequence - I can clearly see HItachi and the DVD R/W.
...and no errors are found by the Hitachi Diagnostic Tool...
Quote
Ok - the quick test showed no errors.
Quote
the advanced test found no errors either.
@TOOTR:
Can you hook up the hard drive to a working computer and run chkdsk (Checkdisk) and fixmbr (or a similar tool)? Try to access and backup any important data on the drive before you check its data/partition structure for integrity.

Ipod Connected but not detected !!please help!!!

Hello! so ive come to my last resort in order to figure this problem out. The basic problem is that itunes does not recognize my 5th generation ipod. Ok here are the details:
-running windows XP professional with all security updates(i.e service pack 3)
-tried the 5 R's
-If another ipod is connected to my computer it works perfectly
-everything is up to date
-Cord is in working conditions
-when my ipod is connected to other computers it works
-I just recently re-installed Windows XP completley(new partition and everything)
-USB hubs work fine due to other ipods working fine on my computer when connected
-I have formatted my ipod, uninstalled everything that has to do with Apple and quicktime, from temporary files to program files etc.. then i re installed everything and nothing works
-Ipod shows up in my computer and i am able to go into it but it will not pop up in itunes.
-when the ipod is plugged in and itunes is up it is frozen for a while until the ipod is unplugged then everything returns to normal.
i think thats all the details i can think of at the momment.
please help!, ive tried almost everything i can think of and read, but maybe i missed something.

Still sounds like a USB problem to me. Have you tried the usb ports on the BACK of the computer?

HT4623 hi, i could not able to reset for location and privacy,because i forgot my passcode i have tried 10 times failed. my i phone5 can not detect postition. so please let me know what shoul i do?

Hi, i could not able to reset location service because i forgot my passcode tried 10 times failed what should i do? my phone does not work location service any of them apps.

If you have "forgotten" your passcode
see here for fix
http://support.apple.com/kb/HT1212

Mainboard did not detect SATA1 HDD

My PC using P965 Platinum Series MS-7238 motherboard, Processor Intel Dual Core 3.0 GHz, 128MB Nvidia G-Force PCI VGA, RAM 1024MB Visipro, HDD 80GB Seagate barracuda 7200rpm SATA1, and I have bought it on 2nd of June 2007. during these periode of time (the date I bought till last week) my PC running well.
Last week 21st of may 2009, I found my PC did not detect my HDD. I have installed the HDD to another PC in order to check whether the problem was caused by my HDD or the motherboard. After I tested the HDD by installing it to another PC, it seems the HDD is in good condition and running well.
After that I try to change the powerd cord and SATA1 cord to the HDD with the brand new one to check if the problem caused by the cords and still my motherboard did not detect the HDD. I am very confused what is wrong with my PC. Please help me to solve this problem so that I can use my PC back.

Hi,
the board has two controllers (ICH8R Primary SATA Controller (SATA Ports 1-6)) and JMicron JMB361 (SATA Port 7)). Which SATA Port is your hard drive connected to? The chance that both onboard SATA Controllers or all SATA Ports have been damaged is very low. Try other SATA ports and see if the situation changes if you connect it to a different controller.
Also, have you cleared CMOS with main A/C power cable removed from PSU to see if that changes anything?

Jre6u27 win7 (64) applications can not detect

windows7 x64
I had jre7.x version installed. And it works fine.
Once I removed this version and installed jre6.27 (in fact, when install jdk6.27), applications can not find jre.
"JAVA_HOME" is set.
"Path" contains path to jre & jdk (i was try any varyations also with '\bin' subfolders).
javac run from any location.
The registry has all nessesary mentions jre & jdk.
But, nevertheless, applications does not detect jre.
Please help! Any suggestions are welcome.
fyi: javaFX 2.0.2 with sdk also installed in system.

I tried every thing
updated my bios
tried in device manager
tried in any mode you like
tried to install the latest drivers that support windows7

OPatch could not detect Perl

I've run Opatch a million times before (well, maybe not that many but quite a few anyways). Now I'm trying to run it again and I get the following message:
"OPatch could not detect Perl.
Please set PERL5LIB appropriately and invoke Perl."
I even installed Active Perl, in case there was something missing, to no avail.
I'm using Windows 2000 Professional.
This is what my variables looks like:
PERL5LIB=C:\Perl\lib;C:\Oracle\product\10.1.0\db_1\perl\5.6.1\lib
PATH=C:\Oracle\product\10.1.0\db_1\perl\5.6.1\bin\MSWin32-x86;C:\Perl\bin\
If I do a perl -v from the command line, I get the following:
This is perl, v5.8.7 built for MSWin32-x86-multi-thread
(with 14 registered patches, see perl -V for more detail)
Copyright 1987-2005, Larry Wall
Binary build 815 [211909] provided by ActiveState http://www.ActiveState.com
ActiveState is a division of Sophos.
Built Nov 2 2005 08:44:52
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using `man perl' or `perldoc perl'. If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.
So perl is responding, but opatch doesn't see it for some reason. What am I missing?
Thanks!
Gabriel

It seems like there is some mismatch.
PERL5LIB is set, but what about PERL_BIN? I would suggest you to unset both the variables and try. Ideally, OPatch will search the perl inside Oracle Home and set it accordingly.
You said you have installed Active perl, but PERL5LIB is set to the perl in Oracle Home.
So better that you unset both the variables. Also, check if you have this file C:\Oracle\product\10.1.0\db_1\perl\5.6.1\bin\MSWin32-x86\perl.exe

Lan not detecting networks

A week ago, my wireless card stopped working for no reason. The device manager stays that it is functioning properly however I cannot find the wireless access points. I have gone through all the troubleshooting processes but none of them seem to have an effect. I have tried it at a friend's house and in mine. In my house we have a linksys g router and all the other computers work just fine. In my friend's house, they have a belkin g router. When I type in ipconfig on my command prompt I get this as a response;
                   ethernet adapter local area connection 2:
                   Media State . . . . . :media disconnected
                   connection specific dns suffix . :
                   multiple times for allt eh connections
The laptop is an X60., and it has been dropped multiple times in the past however it works just fine and the damage is only cosmetic as far as I can tell. I was using the computer the night before and put it on AC power to charge before going to sleep. I am thinking about sending it in for the warranty but am not sure if if can still be covered.

Quote from: flobelix on 19-November-13, 15:02:08
I guess SMPS is a Switched-mode power supply or PSU as we would say to put it short. How had that been "repaired". Did they replace it or indeed repair it?
They repaired it and as I saw, they did some soldering on wires (melted some wires and combined) inside the SMPS (Power Handler).
Can that be the problem, yesterday I tried many other methods like resetting the BIOS etc.
But still nothing works, I think the problem is with motherboard, because rest all components are working like USB, DVD, Hard Disk etc. everything just not the LAN.
The same LAN cable works on other PCs and Laptops but this PC with MSI A75-G55 Motherboard is not detecting the LAN cable.

Ipod mini 2nd gen 1 gb: not detected by laptop (win 7 64 bit), if detected: error during autofill and cannot be restored, please help :D

My laptop does not detect my ipod mini (2nd gen 1 gb), when i connect it the orange light flashe 2 or 3 times then nothing happens. if ever that it will be detected by my laptop and when i sync music on it there will be an error and itunes will suggest to restore it to its factory setting and if i choose to restore it error 3194 happens. so my top priority of course is for it to be detected then fix the latter. please help any will be much appreciated

This is an Answer for a Possible Solution. It worked for me and is still working. The issue I was having with my 64 bit vista, was Apple Mobile Device Service was not being installed, I dont know why. But I disabled any active running program through MSCONFIG, to allow a clean uninterrupted install of ITUNES 8.02. This allowed AMDS and drives from ITUNES to install. Hope this works for most of you.
APPLE, please review your Support Methods. Re-installing doesnt help an issue that resulted from installing.

I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help

I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help

Did you try to remove all Apple related software and reinstall iTunes again? Removing iTunes, QuickTime, and other software components for Windows Vista and 7

Motherboard is not detecting my soundcard Please he

Similar Messages

Maybe you are looking for