Motherboard issue? With video card.

Mainboard:  760GMA-P34(FX) (MS-7641)   
PCB Version:  5.0
BIOS Version: VP.0 (aka Version: V25.0)
BIOS Date:  5/28/2013
Everything works fine using onboard video. Windows 7 64 bit.
Plug in my Nvidia GT 620 and immediately CPU fan maxes out with no increase in temperature, system still stable using standard VGA driver provided by windows. After ANY NVIDIA driver is installed, windows blue screens upon boot. We can't see the error because the blue screen is too quick, and it immediately tries to reboot and restore. Event logs show nothing.
I'm at a loss here. MSI motherboard tech support isn't open on the weekends, hopefully you guys can shed some light. Is this common? Do I need a new board? I've never come across anything like this before. The rest of the machine is 100% stable, the only issue(s) that arise is when the video card and the drivers are installed. The video card works fine in another machine, I've replaced the power supply with a much heftier one with more juice, and the same thing happens.
Thanks!

Quote from: badboy2k on 03-May-15, 21:22:59
>>Posting Guide<< <-- can you read and list your parts used here?
Without above done, hard to say what I think.

Similar Messages

  • H67A-G43 (B3) - Windows 7 64-bit Install issues with Video Card(s)

    Specs
    Case - CoolerMaster CMP 350 w/500 Watt PSU
    Motherboard - MSI H67A-G43 (B3)
    Processor - Intel i7-2600
    Memory - 16GB (4x4GB) DDR3 1333
    Hard Drive - Western Digital Caviar Green 1TB SATA 2
    Video - *multiple cards tested
    Issue
    OS Installation
    Video Card - ASUS HD 7850 DirectCUII - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
    Video Card - GeForce 9300 GE - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
    Video Card - MSI N430 GT - Computer does not POST.
    Video Card - Integrated - Computer boots and completes install of Windows 7 64-bit. Install all drivers, update BIOS to current version.  Attempt to boot with video cards listed above with new BIOS, same issues. (First two hang on Windows logo, 3rd no POST.)
    Attempted Resolutions
    As stated, I have tried 3 different video cards, as well as 2 motherboards, both of them MSI H67A-G43(B3).
    We have ordered 2 other new motherboards (one ASUS, one Gigabyte) because we need to get this built for the customer ASAP.  However, we have previously used the H67A-G43 boards with no issues.  We would like to be able to use these motherboards on future builds.  What possible solutions are there for these issues?

    Quote from: HU16E on 20-April-12, 03:32:27
    Tried a battery removed CMOS clear and reset after the UEFI/BIOS update? Tested with another PSU? Tried with just one RAM stick in the primary dimm slot, or with just two sticks?
    Results
    1 Stick DDR3 - Freezes in "Starting Windows" screen when video card (HD 7850) installed.  Still works correctly with Integrated.
    1 Stick DDR3 + swapping out CoolerMaster 500 Watt PSU for "Power" 500 Watt PSU - Freezes in "Starting Windows" screen with video card.  Using Integrated video, works correctly.
    This is on an unflashed H67A-G43 (B3) new out of the box.

  • Intermittent issues with video output initialization

    Hi Guys,
    I have received a new (i5, 15') Mac-book Pro more than 9 months ago. About 6 months ago it started having some serious intermittent issues with video output. Those issues are numerous and different every time, but all seems to lead to GPU problem. In chronological order:
    1)Started showing static colors as flickering and white color as blue.
    2)Blue screens in bootcamp and hangs in mac os
    3)Startup problems (fail to start)
    4)Startup problems resolved with firmware patch, but video fails to initialize during startups:shows black on mac os, and distorted green during bootcamp.
    So right now I am stuck with #4. The main issue is that it is intermittent - sometimes it starts to happen and sometimes it does not. Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap, even when I was able to demonstrate it to 2 people in there and gave me back the unit after failing to reproduce the problem on their own. I have all those problems in video and photos, but I don't see anywhere I could send them besides this forum.
    Some of the evidence (I have much more):
    http://www.youtube.com/watch?v=MsTYnUFCX1I
    http://www.youtube.com/watch?v=zK85Hi9gx24
    http://www.youtube.com/watch?v=pRH3DpN7qB0
    http://www.youtube.com/watch?v=dMXo8qF6S_k
    Message was edited by: Breakable

    "I have received a new (i5, 15') Mac-book Pro more than 9 months ago."
    You are still under warranty. *Call AppleCare*
    "Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap"
    No you cannot make Apple do anything. What you can do is call _Apple Customer Relations_ in your country. You can call AppleCare & ask politely & firmly to be transferred over to Customer Relations if there is no direct phone number like there is in the US. Relay to them what you stated in this post. See what they can do for you.
    You posted in the wrong MBP area (Original). I have requested that a HOST move your post to the proper forum MacBook Pro (2008 and Later). There will be no need for you to repost.

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

    Hello,
    We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
    The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
    - WS-C6505E-SUP2T
    - WS-X6824-SFP-2T
    There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
    Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
    Do you have this issue as well ? Any direction or help ?
    I am afraid of a potential bug...
    Rgds,
    Yoann

    When you were placing the internal test calls, where was your phone located?   The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
    Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A?   Are these working fine?   If not, then it's likely you do have a QoS issue over the WAN to Site A.
    Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
    Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
    If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
    Kind regards,
    Craig

  • HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

    How do you solve an issue with the card? I don't get the option of 'none'

    I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
    I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
    #1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
    #2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
    #3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
    #4 Click on App Store (upper center of screen).
    #5 Scroll down the screen page until you see Top Free Apps on the right side.
    #6 Choose any one of the FREE apps.
    #7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
    Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
    Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
    #8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
    What a pain in the keester, eh?

  • Issues with Video Conversion in N95 8GB

    I purchased a N95 8 GB yesterday. I have been trying to get the video conversion to work with video manager
    The conversion status tab do not go beyond 40% and it hungs there without any error message.
    Has anyone faced similiar issues with video.
    I used another convertor to convert the AVI file to mp4. But this file could not be played by N95 real player.
    Are there any specification for conversion, for the video to play in N95.
    Can anyone suggest on the best tool to convert video to MP4 and play in N95 ?
    Thanks,
    Sooraj

    For tips and tricks on video and nseries visit this blog..
    http://portablevideo.blogspot.com/
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Connection issue with Gift Card

    Hi everybody,
    I have a problem when trying to connect to iTunes Store to redeem a gift card. Whenever I push button "use code" (please apologize for translation: I'm using the italian version), I get a message saying that iTunes Store could be busy and I should verify Internet connection.
    But when I run iTunes Diagnostics everything is OK.
    The issue won't happen (I think) if I buy a song normally.
    I'm using the newest version of iTunes (7.3.1.3) and I've de-activate Widnows Firewall but the problem still occurs.
    Do you have any suggestions?
    Thank you in advance
    Riccardo

    Hello there sam234,
    Gift cards are always awesome to purchase, and even better to receive! I’m sad to hear that you seem to be having continued issues with one you may have purchased from us. Generally speaking, we can usually resolve the issues with gift cards, especially if they are Best Buy gift cards.
    That being said, I am sending you a private message to gather further details about the $50 gift card you seem to be having troubles with. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
    Sincerely, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

    I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

    Apple guarantees their work, take it back.

  • Hp m8430f won't boot with video card

    I have a HP Pavilion Media Center m8430f Desktop PC.
    One day on startup my acer flat screen wont show bios or anything.
    If I remove the 8500 gt and use integrated graphics, it works fine with my old crt monitor and I’m actually using it to write this.
    If I insert the 8500 gt, however, my lcd monitor gets no signal and I hear no OS sounds indicating that windows is loading up or anything even though the video card works in another computer and I've replaced the motherboard.
    I've tried pretty much everything I can think of, and I'd really appreciate it if you guys could give me some ideas on what to try next.
    IPIBL-LB (Benicia) motherboard
    Intell core 2 quad Q6600 2.4 GHz
    nvidia ge force 8500 gt
    Integrated graphics intell gma 3100
    tv tuner card
    Modem card
    4 Gig DDR2 ram
    Steps I've taken
    Video card and monitor tested and work in another PC
    Reset bios with jumper
    Removed ram tried one at time .
    Removed all cards and tied that.
    Replaced power supply
    Tried all above again.
    Updated bios
    Replaced motherboard and put it all back together

    The 500w is definitely sufficient and this is such an odd issue. It doesn't make since. We've tested parts in other machines and even replaced parts yet the same problem holds true.
    With the video card inserted does the computer boot at all? Do you hear fans turn on lights, anything or is it just dead?
    I'm wondering if we should try to get the computer down to as basic as we need it.
    1 stick of RAM,
    video card
    processor
    Disconnect hard drive, CD ROM. and see if it boots with just the basics plugged in.
    After that I'll admit that I'd be throwing darts in testing things to see if there is something that sticks. Something like trying something else in the PCI slot besides a video card to see if it stops the system from booting.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • GDM and Gnome graphical issues with Nvidia card

    Hi !
    I want to install archlinux with cinnamon as desktop environment on the computer of a friend, but I have some issue with it, and especially with (I think) the graphic card, it's a Nvidia GeForce FX 5200LE.
    I tried installing nvidia-173xx from the aur first. I installed gdm, but it's extremly slow, as a result that I can't log in (nevertheless the mouse is fluid..)  the cpu is not so much used yet, and it's the same thing in the cinnamon session or the gnome session (I tried installing lightdm to log in which works fine). Moreover, in the session I've got some strange graphical things, such as some missing white pixels, or a blue window when I launch nautilus, ... (here are some screenshots : http://i49.tinypic.com/2efhm6s.png and a with a window : http://i46.tinypic.com/116m05k.png)
    I tried to install the nouveau driver instead, and now gdm don't freeze, I can log in, but there is always these strange graphical issues.
    Is the graphic card too old for gnome ? Or did I forget something ?
    Thank you in advance for your help !! And sorry for my english ..
    Here are some log with the nouveau driver :
    - Xorg.log :
    [ 9.026]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 9.026] X Protocol Version 11, Revision 0
    [ 9.026] Build Operating System: Linux 3.4.8-1-ARCH i686
    [ 9.026] Current Operating System: Linux famille-workstation 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 08:15:06 UTC 2012 i686
    [ 9.026] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=83840f06-da6c-4558-a8ef-8ed779442ff3 ro quiet pci=nomsi
    [ 9.026] Build Date: 27 August 2012 08:08:29AM
    [ 9.026]
    [ 9.026] Current version of pixman: 0.26.2
    [ 9.026] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 9.026] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 9.027] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 5 13:26:01 2012
    [ 9.053] (==) Using config file: "/etc/X11/xorg.conf"
    [ 9.053] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 9.072] (==) No Layout section. Using the first Screen section.
    [ 9.072] (==) No screen section available. Using defaults.
    [ 9.072] (**) |-->Screen "Default Screen Section" (0)
    [ 9.072] (**) | |-->Monitor "<default monitor>"
    [ 9.074] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 9.074] (**) Option "AIGLX" "off"
    [ 9.074] (==) Automatically adding devices
    [ 9.074] (==) Automatically enabling devices
    [ 9.127] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [ 9.127] Entry deleted from font path.
    [ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [ 9.128] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
    [ 9.128] Entry deleted from font path.
    [ 9.128] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
    [ 9.128] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 9.128] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 9.128] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 9.128] (II) Loader magic: 0x82225a0
    [ 9.128] (II) Module ABI versions:
    [ 9.128] X.Org ANSI C Emulation: 0.4
    [ 9.128] X.Org Video Driver: 12.1
    [ 9.128] X.Org XInput driver : 16.0
    [ 9.128] X.Org Server Extension : 6.0
    [ 9.129] (--) PCI:*(0:1:0:0) 10de:0323:107d:1334 rev 161, Mem @ 0xe0000000/16777216, 0xd8000000/134217728, BIOS @ 0x????????/131072
    [ 9.129] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 9.129] (II) LoadModule: "extmod"
    [ 9.145] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 9.156] (II) Module extmod: vendor="X.Org Foundation"
    [ 9.156] compiled for 1.12.4, module version = 1.0.0
    [ 9.156] Module class: X.Org Server Extension
    [ 9.156] ABI class: X.Org Server Extension, version 6.0
    [ 9.156] (II) Loading extension MIT-SCREEN-SAVER
    [ 9.156] (II) Loading extension XFree86-VidModeExtension
    [ 9.156] (II) Loading extension XFree86-DGA
    [ 9.156] (II) Loading extension DPMS
    [ 9.156] (II) Loading extension XVideo
    [ 9.156] (II) Loading extension XVideo-MotionCompensation
    [ 9.156] (II) Loading extension X-Resource
    [ 9.156] (II) LoadModule: "dbe"
    [ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 9.157] (II) Module dbe: vendor="X.Org Foundation"
    [ 9.157] compiled for 1.12.4, module version = 1.0.0
    [ 9.157] Module class: X.Org Server Extension
    [ 9.157] ABI class: X.Org Server Extension, version 6.0
    [ 9.157] (II) Loading extension DOUBLE-BUFFER
    [ 9.157] (II) LoadModule: "glx"
    [ 9.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 9.164] (II) Module glx: vendor="X.Org Foundation"
    [ 9.164] compiled for 1.12.4, module version = 1.0.0
    [ 9.164] ABI class: X.Org Server Extension, version 6.0
    [ 9.164] (**) AIGLX disabled
    [ 9.165] (II) Loading extension GLX
    [ 9.165] (II) LoadModule: "record"
    [ 9.165] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 9.166] (II) Module record: vendor="X.Org Foundation"
    [ 9.166] compiled for 1.12.4, module version = 1.13.0
    [ 9.166] Module class: X.Org Server Extension
    [ 9.166] ABI class: X.Org Server Extension, version 6.0
    [ 9.166] (II) Loading extension RECORD
    [ 9.166] (II) LoadModule: "dri"
    [ 9.166] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 9.172] (II) Module dri: vendor="X.Org Foundation"
    [ 9.172] compiled for 1.12.4, module version = 1.0.0
    [ 9.172] ABI class: X.Org Server Extension, version 6.0
    [ 9.172] (II) Loading extension XFree86-DRI
    [ 9.172] (II) LoadModule: "dri2"
    [ 9.172] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 9.173] (II) Module dri2: vendor="X.Org Foundation"
    [ 9.173] compiled for 1.12.4, module version = 1.2.0
    [ 9.173] ABI class: X.Org Server Extension, version 6.0
    [ 9.173] (II) Loading extension DRI2
    [ 9.173] (==) Matched nouveau as autoconfigured driver 0
    [ 9.173] (==) Matched nvidia as autoconfigured driver 1
    [ 9.173] (==) Matched nv as autoconfigured driver 2
    [ 9.173] (==) Matched vesa as autoconfigured driver 3
    [ 9.173] (==) Matched fbdev as autoconfigured driver 4
    [ 9.173] (==) Assigned the driver to the xf86ConfigLayout
    [ 9.173] (II) LoadModule: "nouveau"
    [ 9.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 9.191] (II) Module nouveau: vendor="X.Org Foundation"
    [ 9.191] compiled for 1.12.2, module version = 1.0.1
    [ 9.191] Module class: X.Org Video Driver
    [ 9.191] ABI class: X.Org Video Driver, version 12.0
    [ 9.191] (II) LoadModule: "nvidia"
    [ 9.191] (WW) Warning, couldn't open module nvidia
    [ 9.191] (II) UnloadModule: "nvidia"
    [ 9.191] (II) Unloading nvidia
    [ 9.192] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "nv"
    [ 9.192] (WW) Warning, couldn't open module nv
    [ 9.192] (II) UnloadModule: "nv"
    [ 9.192] (II) Unloading nv
    [ 9.192] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "vesa"
    [ 9.192] (WW) Warning, couldn't open module vesa
    [ 9.192] (II) UnloadModule: "vesa"
    [ 9.192] (II) Unloading vesa
    [ 9.192] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 9.192] (II) LoadModule: "fbdev"
    [ 9.193] (WW) Warning, couldn't open module fbdev
    [ 9.193] (II) UnloadModule: "fbdev"
    [ 9.193] (II) Unloading fbdev
    [ 9.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 9.193] (II) NOUVEAU driver
    [ 9.193] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 9.193] RIVA TNT (NV04)
    [ 9.193] RIVA TNT2 (NV05)
    [ 9.193] GeForce 256 (NV10)
    [ 9.193] GeForce 2 (NV11, NV15)
    [ 9.193] GeForce 4MX (NV17, NV18)
    [ 9.193] GeForce 3 (NV20)
    [ 9.193] GeForce 4Ti (NV25, NV28)
    [ 9.193] GeForce FX (NV3x)
    [ 9.193] GeForce 6 (NV4x)
    [ 9.193] GeForce 7 (G7x)
    [ 9.193] GeForce 8 (G8x)
    [ 9.193] GeForce GTX 200 (NVA0)
    [ 9.193] GeForce GTX 400 (NVC0)
    [ 9.193] (++) using VT number 7
    [ 9.196] drmOpenDevice: node name is /dev/dri/card0
    [ 9.196] drmOpenDevice: open result is 7, (OK)
    [ 9.196] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 9.196] drmOpenDevice: node name is /dev/dri/card0
    [ 9.196] drmOpenDevice: open result is 7, (OK)
    [ 9.196] drmOpenByBusid: drmOpenMinor returns 7
    [ 9.196] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 9.196] (II) [drm] nouveau interface version: 1.0.0
    [ 9.196] (II) Loading sub module "dri"
    [ 9.196] (II) LoadModule: "dri"
    [ 9.197] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 9.197] (II) Module dri: vendor="X.Org Foundation"
    [ 9.197] compiled for 1.12.4, module version = 1.0.0
    [ 9.197] ABI class: X.Org Server Extension, version 6.0
    [ 9.197] (II) NOUVEAU(0): Loaded DRI module
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    [ 9.197] drmOpenDevice: node name is /dev/dri/card0
    [ 9.197] drmOpenDevice: open result is 8, (OK)
    [ 9.197] drmOpenByBusid: drmOpenMinor returns 8
    [ 9.197] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    [ 9.197] (II) [drm] DRM interface version 1.4
    [ 9.197] (II) [drm] DRM open master succeeded.
    [ 9.197] (--) NOUVEAU(0): Chipset: "NVIDIA NV34"
    [ 9.197] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 9.197] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 9.197] (==) NOUVEAU(0): RGB weight 888
    [ 9.197] (==) NOUVEAU(0): Default visual is TrueColor
    [ 9.197] (==) NOUVEAU(0): Using HW cursor
    [ 9.197] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 9.197] (==) NOUVEAU(0): Page flipping enabled
    [ 9.197] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 9.227] (II) NOUVEAU(0): Output VGA-1 has no monitor section
    [ 9.280] (II) NOUVEAU(0): Output TV-1 has no monitor section
    [ 9.309] (II) NOUVEAU(0): EDID for output VGA-1
    [ 9.309] (II) NOUVEAU(0): Manufacturer: SAM Model: 1b Serial#: 1195913527
    [ 9.309] (II) NOUVEAU(0): Year: 2003 Week: 16
    [ 9.309] (II) NOUVEAU(0): EDID Version: 1.3
    [ 9.309] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 9.309] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
    [ 9.309] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 34 vert.: 27
    [ 9.309] (II) NOUVEAU(0): Gamma: 2.40
    [ 9.309] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 9.309] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 9.309] (II) NOUVEAU(0): redX: 0.634 redY: 0.354 greenX: 0.304 greenY: 0.581
    [ 9.309] (II) NOUVEAU(0): blueX: 0.143 blueY: 0.102 whiteX: 0.318 whiteY: 0.339
    [ 9.309] (II) NOUVEAU(0): Supported established timings:
    [ 9.309] (II) NOUVEAU(0): 720x400@70Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@60Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@67Hz
    [ 9.309] (II) NOUVEAU(0): 640x480@72Hz
    [ 9.310] (II) NOUVEAU(0): 640x480@75Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@56Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@60Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@72Hz
    [ 9.310] (II) NOUVEAU(0): 800x600@75Hz
    [ 9.310] (II) NOUVEAU(0): 832x624@75Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@60Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@70Hz
    [ 9.310] (II) NOUVEAU(0): 1024x768@75Hz
    [ 9.310] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 9.310] (II) NOUVEAU(0): 1152x864@75Hz
    [ 9.310] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 9.310] (II) NOUVEAU(0): Supported standard timings:
    [ 9.310] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 9.310] (II) NOUVEAU(0): #1: hsize: 1024 vsize 768 refresh: 60 vid: 16481
    [ 9.310] (II) NOUVEAU(0): #2: hsize: 800 vsize 600 refresh: 60 vid: 16453
    [ 9.310] (II) NOUVEAU(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433
    [ 9.310] (II) NOUVEAU(0): Supported detailed timing:
    [ 9.310] (II) NOUVEAU(0): clock: 108.0 MHz Image Size: 338 x 270 mm
    [ 9.310] (II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 9.310] (II) NOUVEAU(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 9.310] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 9.310] (II) NOUVEAU(0): Monitor name: SyncMaster
    [ 9.310] (II) NOUVEAU(0): Serial No: HJGW403719
    [ 9.310] (II) NOUVEAU(0): EDID (in hex):
    [ 9.310] (II) NOUVEAU(0): 00ffffffffffff004c2d1b0037314847
    [ 9.310] (II) NOUVEAU(0): 100d01030f221b8cea6f8ba25a4d9424
    [ 9.310] (II) NOUVEAU(0): 1a5156bfef8081806140454031400101
    [ 9.310] (II) NOUVEAU(0): 010101010101302a009851002a403070
    [ 9.310] (II) NOUVEAU(0): 1300520e1100001e000000fd00384c1e
    [ 9.310] (II) NOUVEAU(0): 510e000a202020202020000000fc0053
    [ 9.310] (II) NOUVEAU(0): 796e634d61737465720a2020000000ff
    [ 9.310] (II) NOUVEAU(0): 00484a47573430333731390a20200057
    [ 9.310] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 9.310] (II) NOUVEAU(0): Using EDID range info for horizontal sync
    [ 9.310] (II) NOUVEAU(0): Using EDID range info for vertical refresh
    [ 9.310] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 9.310] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.310] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Printing probed modes for output VGA-1
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 9.311] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.311] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.363] (II) NOUVEAU(0): EDID for output TV-1
    [ 9.363] (II) NOUVEAU(0): Output VGA-1 connected
    [ 9.363] (II) NOUVEAU(0): Output TV-1 disconnected
    [ 9.363] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 9.363] (II) NOUVEAU(0): Output VGA-1 using initial mode 1280x1024
    [ 9.363] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 9.363] (--) NOUVEAU(0): Virtual size is 1280x1024 (pitch 0)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 106.5 MHz (scaled from 0.0 MHz), 62.8 kHz, 74.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x800": 83.5 MHz (scaled from 0.0 MHz), 49.7 kHz, 59.8 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 102.2 MHz (scaled from 0.0 MHz), 60.3 kHz, 74.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 9.363] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 9.363] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 9.364] (**) NOUVEAU(0): Mode "1024x576": 47.0 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 9.364] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "848x480": 33.8 MHz (scaled from 0.0 MHz), 31.0 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 9.364] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 9.364] (**) NOUVEAU(0): Display dimensions: (340, 270) mm
    [ 9.364] (**) NOUVEAU(0): DPI set to (95, 96)
    [ 9.364] (II) Loading sub module "fb"
    [ 9.364] (II) LoadModule: "fb"
    [ 9.364] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 9.375] (II) Module fb: vendor="X.Org Foundation"
    [ 9.375] compiled for 1.12.4, module version = 1.0.0
    [ 9.375] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 9.375] (II) Loading sub module "exa"
    [ 9.375] (II) LoadModule: "exa"
    [ 9.376] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 9.380] (II) Module exa: vendor="X.Org Foundation"
    [ 9.380] compiled for 1.12.4, module version = 2.5.0
    [ 9.380] ABI class: X.Org Video Driver, version 12.1
    [ 9.380] (II) Loading sub module "shadowfb"
    [ 9.380] (II) LoadModule: "shadowfb"
    [ 9.380] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 9.382] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 9.382] compiled for 1.12.4, module version = 1.0.0
    [ 9.382] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 9.382] (--) Depth 24 pixmap format is 32 bpp
    [ 9.382] (II) NOUVEAU(0): Opened GPU channel 1
    [ 9.384] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 9.384] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 9.384] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 9.399] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 9.399] (II) EXA(0): Driver registered support for the following operations:
    [ 9.399] (II) Solid
    [ 9.399] (II) Copy
    [ 9.399] (II) Composite (RENDER acceleration)
    [ 9.399] (II) UploadToScreen
    [ 9.399] (II) DownloadFromScreen
    [ 9.399] (==) NOUVEAU(0): Backing store disabled
    [ 9.399] (==) NOUVEAU(0): Silken mouse enabled
    [ 9.399] (II) NOUVEAU(0): [XvMC] Associated with NV30 texture adapter.
    [ 9.399] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 9.399] (==) NOUVEAU(0): DPMS enabled
    [ 9.399] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 9.399] (--) RandR disabled
    [ 9.399] (II) Initializing built-in extension Generic Event Extension
    [ 9.399] (II) Initializing built-in extension SHAPE
    [ 9.399] (II) Initializing built-in extension MIT-SHM
    [ 9.400] (II) Initializing built-in extension XInputExtension
    [ 9.400] (II) Initializing built-in extension XTEST
    [ 9.400] (II) Initializing built-in extension BIG-REQUESTS
    [ 9.400] (II) Initializing built-in extension SYNC
    [ 9.400] (II) Initializing built-in extension XKEYBOARD
    [ 9.400] (II) Initializing built-in extension XC-MISC
    [ 9.400] (II) Initializing built-in extension SECURITY
    [ 9.400] (II) Initializing built-in extension XINERAMA
    [ 9.400] (II) Initializing built-in extension XFIXES
    [ 9.400] (II) Initializing built-in extension RENDER
    [ 9.400] (II) Initializing built-in extension RANDR
    [ 9.400] (II) Initializing built-in extension COMPOSITE
    [ 9.400] (II) Initializing built-in extension DAMAGE
    [ 9.800] (II) AIGLX: Loaded and initialized swrast
    [ 9.800] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 9.807] (II) NOUVEAU(0): NVEnterVT is called.
    [ 9.807] (II) NOUVEAU(0): Setting screen physical size to 338 x 270
    [ 9.807] resize called 1280 1024
    [ 10.066] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 10.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10.066] (II) LoadModule: "evdev"
    [ 10.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 10.075] (II) Module evdev: vendor="X.Org Foundation"
    [ 10.075] compiled for 1.12.3.901, module version = 2.7.3
    [ 10.075] Module class: X.Org XInput Driver
    [ 10.075] ABI class: X.Org XInput driver, version 16.0
    [ 10.075] (II) Using input driver 'evdev' for 'Power Button'
    [ 10.076] (**) Power Button: always reports core events
    [ 10.076] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 10.076] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10.076] (--) evdev: Power Button: Found keys
    [ 10.076] (II) evdev: Power Button: Configuring as keyboard
    [ 10.076] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
    [ 10.076] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 10.076] (**) Option "xkb_rules" "evdev"
    [ 10.076] (**) Option "xkb_model" "evdev"
    [ 10.076] (**) Option "xkb_layout" "us"
    [ 10.117] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 10.117] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 10.117] (II) Using input driver 'evdev' for 'Power Button'
    [ 10.117] (**) Power Button: always reports core events
    [ 10.117] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 10.118] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 10.118] (--) evdev: Power Button: Found keys
    [ 10.118] (II) evdev: Power Button: Configuring as keyboard
    [ 10.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
    [ 10.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 10.118] (**) Option "xkb_rules" "evdev"
    [ 10.118] (**) Option "xkb_model" "evdev"
    [ 10.118] (**) Option "xkb_layout" "us"
    [ 10.118] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 10.118] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 10.118] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 10.119] (**) AT Translated Set 2 keyboard: always reports core events
    [ 10.119] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 10.119] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 10.119] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 10.119] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 10.119] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 10.119] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
    [ 10.119] (**) Option "xkb_rules" "evdev"
    [ 10.119] (**) Option "xkb_model" "evdev"
    [ 10.119] (**) Option "xkb_layout" "us"
    [ 10.120] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event4)
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 10.120] (II) Using input driver 'evdev' for 'ImPS/2 Logitech Wheel Mouse'
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x5
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found relative axes
    [ 10.120] (--) evdev: ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: Adding scrollwheel support
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 10.120] (**) evdev: ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 10.120] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
    [ 10.120] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 9)
    [ 10.120] (II) evdev: ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
    [ 10.120] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
    [ 10.121] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
    [ 10.121] (II) No input driver specified, ignoring this device.
    [ 10.121] (II) This device may have been added with another device file.
    [ 10.121] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 10.121] (II) No input driver specified, ignoring this device.
    [ 10.121] (II) This device may have been added with another device file.
    [ 10.174] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 10.174] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 10.174] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 10.174] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 10.174] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 14.960] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 14.960] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 14.960] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 14.960] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 14.960] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 14.961] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 84.256] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 111.559] (II) NOUVEAU(0): NVEnterVT is called.
    [ 111.601] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 111.601] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 111.601] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 111.601] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 111.601] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 111.601] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 111.602] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 119.891] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 119.891] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 119.891] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 119.891] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 119.892] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 119.892] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 121.162] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 121.162] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 121.162] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 121.162] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 121.163] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 121.163] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 122.743] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 122.743] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 122.743] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 122.743] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 122.744] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 122.744] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 138.896] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 167.669] (II) NOUVEAU(0): NVEnterVT is called.
    [ 167.720] (II) NOUVEAU(0): EDID vendor "SAM", prod id 27
    [ 167.720] (II) NOUVEAU(0): Using hsync ranges from config file
    [ 167.720] (II) NOUVEAU(0): Using vrefresh ranges from config file
    [ 167.720] (II) NOUVEAU(0): Printing DDC gathered Modelines:
    [ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 167.720] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 186.390] (II) NOUVEAU(0): NVLeaveVT is called.
    - .xsession-errors in gnome session :
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
    GNOME_KEYRING_CONTROL=/home/olivier/.cache/keyring-D3uSoF
    GPG_AGENT_INFO=/home/olivier/.cache/keyring-D3uSoF/gpg:0:1
    SSH_AUTH_SOCK=/home/olivier/.cache/keyring-D3uSoF/ssh
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    Failed to play sound: File or data not found
    ** Message: applet now removed from the notification area
    ** Message: applet now embedded in the notification area
    Avertissement du gestionnaire de fenêtres : CurrentTime used to choose focus window; focus window may not be correct.
    Avertissement du gestionnaire de fenêtres : Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
    (gnome-shell:700): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
    Individuals will not be linked properly and creating new links between Personas will not work.
    The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    (gnome-settings-daemon:657): color-plugin-WARNING **: Done switch to new account, reload devices
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    (gnome-shell:700): GLib-GIO-WARNING **: Dropping signal ActiveSessionChanged of type (s) since the type from the expected interface is (o)
    Last edited by Jejel59 (2012-09-06 11:34:53)

    I'm no expert on reading the xsession errors, but I had all sorts of problems running gnome3 with my machine of the same vintage.   Cinamon is based on gnome3.  I switched to Mate which is a re-packaging of the old gnome2 along with Compiz for the window manager and all works well.
    I strongly suspect that they are using the newer OpenGL 4 API.  The Nvidia FX5200 is stuck at OpenGL 2.1.

  • MacBook Pro 15 Mid 2009 - Mac OSX 10.10.2 - Any issues with video lagging/audio lagging?

    Hello
    Current OS and System details below. Have started to experience audio and video lagging when browsing (not effecting audio on music)
    Have looked at some forums and it appears to be an issue with some later cards and Mac Book Pros
    Any one else experiencing issues? and if so are they resolved? and if so by what manner were they resolved?

    Since yo said "an issue with some later cards and Mac Book Pros" I would also post n the MacBook forum
    MacBook Pro

  • PCI port problems with video card

    I have been running 2 video cards (ati 9800pro and 7500) fine for about 2 months now.  Over the weekend I came home to find the monitor with my second card garbled with black lines running up and down the screen, shifting left and right.  Also, there was a problem with my promise controller (had a question mark next to it in device manager)  I reinstalled that and it works fine now.  My second card continues to give me problems though.  Device manager picks it up and says that my card is working fine but in display settings my card does not show up.  I believe it a problem with the motherboard as I have tried 2 nvidia cards with the same result.  It is also not related to windows as if I change the boot config to load my second card first (pci) the black lines/wavy picture loads up with the msi screen and in the bios setup as well (totally unreadable).  I've also made sure that my monitor is working fine.  Any suggestions????  Thanks.
    Ian

    Well to tell you the truth, I don't like the sound of this ...especially since you said that you tried another card, and had the same result....Well I would first go into the BIOS and on the PNP/PCI page, check the Clear NVRAM to enabled..As this will reset all the PNP devices...See if that works ...Have you tried to switch the AGP/PCI initiation sequence in the BIOS? back and forth?...You can also see if there are any IRQ conflicts.(but you probaly did this allready)...You can also try to increase the PCI latency, If it is set to 32 go up to 64 and try...Do you have any other PCI cards with problems?...Have you tried a different PCI slot?.....Well maybee another member or moderator has some advice ...Let us know.....Sean REILLY875

  • Issues with Video and Sound

    Hello all. I am having an issue with my MacBook Pro. This issue travelled from 10.4 to 10.5 to 10.6 with me. The install from 10.4 to 10.5 was a clean install. I messed around with the video card a long time ago back in 10.4 through a boot camp windows 7 partition trying to get a game to work. I don't remember for sure if the problem started right after that or not, but I'm thinking probably. Basically I was trying to reflash the video card to get a game to work in a beta version of windows 7.
    My main issue is that videos are laggy and jump and freeze and such. This happens on anything from a YouTube video to Quicktime to VLC. Also, the sound will frequently freak out and become "robotic" and skip a lot as well. If I leave it alone and don't play anything with sound, it will return to normal after a random amount of time. Restarting also fixes the issue. This usually only happens when playing video, but every once in a while will happen in iTunes when just listening to music.
    I guess I need to know if there is a way to "reset" the video card or graphics card or whatever. The audio too if need be.

    My main issue is that videos are laggy and jump and freeze and such.
    Make sure you have the latest versions of VLC, Flip4Mac, Perian and Adobe Flash Player.
    Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751
    For Quicktime issues, visit its forum area - http://discussions.apple.com/forum.jspa?forumID=932

  • Issue installing video card on S5-1414

    Before I start I want to let it be known this system is out of warranty, so I am not worried about voiding warranties.
    That said.
    I came into position of a HP S5-1414, the case was smashed, however the motherboard (Joshua H61) was in perfect order.
    I installed it in an other case, put a Antec TP-750 Blue PSU, 2 4 gig Corsair Vengence DDR 3 12800, 4 SATA 3 HD"s and one Samsung SSD Pluged into the Mini PCIe port that the Wireless adapter was installed in. None of those is causing the issue.
    The problem I am having is that every time I install a PCIe Video Card (in this case a VisionTek AMD Radeon HD 5450 VIdeo card) the computer will boot once and then when I reboot it (for example I boot into the BIOS and when I chose Save and exit) I get 6 beeps and the Yellow HD activity light flashes 6 times. Now I know it isn't the video card because I can install it in my other computers and they boot fine. I have cleaned the contacts, make sure there was power going to the Video card from the PSU, made sure it was plugged into the PCIe slot and made sure the PCIe ports were active inthe BIOS.
    What am I missing or doing wrong?
    This question was solved.
    View Solution.

    Hi,
    Post the HP documentation that shows that a SSD will work when plugged into the mini-pcie port.  If not, then remove the SSD from the mini-pcie port.
    Remove the video card and boot up.  If your PC boots OK then open up the RUN window and enter: MSINFO32
    What BIOS level is your PC running?
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

Maybe you are looking for