Motherboard will not boot up@133

I have recently built a system with an MSI KT4V-L motherboard, 512 PC2700 Ram, Athlon 2GH Chip, the system works fine with the FSB set at 100MHz, as soon as the system is set to 133MHz then the system will not boot to either windows or a boot disk, is this a problem with the motherboard or a conflict with the ram modules

Hi,
Has this board got a jumper to toggle 100/133 - if it has you need to set it to 133 and also - set the clock frequency in the BIOS to 133.
Forgive me if I'm stating the obvious - but you never know.
Axel :D

Similar Messages

New KT4AV-L motherboard will not boot

I have replaced my motherboard and processor and when I try and boot up it beeps several times and the D-Bracket goes through several combinations and ends up at
green 123 red 4 which according to manual is Testing RTC
the state before this is red 1 green 234 according to manual is boot attempt
the monitor stays in standby and never goes to green light
I have tried flashing cmos with no change
KT4AV-L
Athlon XP2400+ fsb 266
power supply DR-A300ATX
Geforce2 MX400 64Mb
2x 256Mb Dr2100
Any ideas what it could be would be appreciated
thanks
Steve

apologies i meant clear cmos
psu is
Deer Company Ltd
+3.3V 20A
+5V 30A
+12V 10A
-12V 0.8A
-5V 0.5A
+5VSB 2A
another thing I saw in manual was that it supports 1.5V AGP videocards and no mention of 3.3V, not sure what voltage my old geforce2 is.

KN27-Delta-L motherboard will not boot

D-bracket lights 3 and 4 go on and system shuts off. Explanation in manual says "decompressing bios image to ram for fast booting" Means zilch to me as to the problem it is indicating.
I have 256mb of DDR333 memory that works on another MSI motherboard. Running an AMD 2200 cpu. Left everything as default settings.
I would fix what needs fixing if I knew what to fix.

Hi Guys,
I got this thing: my comp just boots up, but when the winxp logo should appear, the system hangs and reboots. I guess it's my PSU!? If anyone is LOL at my PSU specs please let me know. I also woud like to know -or get an indication- of what would be the minimum specs for a psu.
greetz

N100 Will Not Boot - Motherboard problem?

Hi - I have N100 and it seems that the notebook will not boot at this time. Power Button is pushed with battery light blinking red momentarily to geen and then notebook shuts off while display of boot screen is not shown, could not hear hard drive spinning, or see CPU fan moving.
I've opened many covers on the bottom to make that everything is tight with still no success.
Does another have a similar problem? It seems more like a motherboard issue, which is very serious but would like to confirm someone elese's experience.
Thanks.
Vin

I have same experience with N100. See my poster a day ago (http://forums.lenovo.com/lnv/board/message?board.id=N_Series_Lenovo_3000&thread.id=12233).
If black screen comes with power light on and no beeps, it is mostly likely motheboard. You can cofirm it by removing memory or hard drive. If you hear beeps, then motherboard is fine. Otherwise, it is failure of MB. I called Lenovo and was told MB replacement costs $475. The cheapest MB from ebay is $200. So it is not worth to replace. Time to buy a new laptop.

Msi 6511 will not boot

I received an msi 6511 and it will not boot, I only get a light on the floppy but I can not tell if the other leds are on because they are not hooked up (I do not have the manual to this board)!! The specs are
1.2 GHz amd athelon
384 mb pc100 sdram
onboard sound
onboard video
450 watt psu
Any help would be much appreciated!

Hi
Your athlon could either have a 100 fsb or a 133, they came both ways. If it is one with a 133fsb then the memory (PC100) is not fast enough to let it boot. Set jumper J6 to pins 2-3 for a 100mhz fsb so that the cpu fsb will match the memory.
See attached link for jumper settings if you don't have the manual. This appears to have been an oem motherboard used by packard bell among others.
http://www.uktsupport.co.uk/pb/mb/explorer.htm

KT2 Combo will not boot

Installed board with Duron 1300. The board booted to bios with no problems, until I formatted the HD and rebooted. It will not boot now at all. No bios, VGA doesn't even come on. No beeps. No HD activity, nothing. I cleared CMOS and nothing happened. Please help me!!!!

No beebs? PC-speaker connected? If there is no beebs or life of any kind, the motherboard or some some other part may be shortcutted. Or something very VERY important has fried on the motherboard or PSU is broken.
If it's a short circuit, disassemble you computer completely and try to boot your mobo out of the case w only the most neccessary equipment installed.
Also, don't forget to check your fsb jumper that it isn't in the wrong setting, it is right next to clear cmos jumper and if you accidentaly switch that in the process from fsb 100 to 133 the mobo will most certainly not boot.

Will not boot up on 1st try

Hey everyone,
I am having a strange problem, My computer will not boot up on the 1st try after it has been shut off for 2 hrs or more. Here are my specs and then I will go into more detail. I like to use pictures because some of the terminology escapes my vocabulary.
MSI P6N Diamond LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard
Intel Core 2 Duo E6850 Conroe 3.0GHz 4M shared L2 Cache LGA 775 65W Dual-Core Processor
ZALMAN CNPS9700 LED 110mm 2 Ball CPU Cooler
2 X Seagate Barracuda 500GB 7200 RPM SATA 3.0Gb/s Hard Drive In Raid 0
XFX GeForce 8800GT 512MB 256-bit GDDR3 PCI Express 2.0 HDCP Ready SLI Supported Video Card
Kingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
BFG Tech 800W Power Supply>>+3.3V@24A,+5V@30A,+12V1@20A,+12V2@20A,+12V3@20A, +12V4@20A,[email protected],[email protected]
2 X LITE-ON 16X DVD±R DVD Burner
SONY Black 1.44MB 3.5" Internal Floppy Drive
COOLER MASTER Stacker 830 Evolution Black Aluminum ATX Full Tower Computer Case
Logitech Z-5300 Speakers 5.1
Samsung SyncMaster 204B monitor
Logitech G5 mouse
Windows XP home, SP2
Build Date 11/26/2007
Problem:
After being shut off for more than 2 hours my computer will not boot up on the 1st try. It goes to a message that says"Reboot and select proper boot device or insert boot media in selected boot device and press a key". I shut it down using the power button, wait for the hard drives to stop spinning, and then hit the power again and it starts up just fine. It will restart just fine also as many time as I want to restart it, after it has been running in windows. Once it is running, it runs terrific, no problems at all.
If you go right into the bios after sitting for a while you see this in the boot sequence, notice there is no hard drives(Nvidia Stripe)in the boot sequence.
After shutting it down and starting right back up this is what you see in the boot sequence. This pic is from a different time, thats why the boot sequence is different.
Here is a short youtube video (2:10 sec) made to help show the problem. (I called it a Cold boot Storage problem for another thread) just ignore that.
Things I have done to try to solve the problem:
1. Update the bios
2.I have moved the boot sequence around, Foppy1st, or CD 1st, ect. and even disabled the [USB:HP Photosm] in the boot sequence, Hard Drives are 1st now.
3.Replaced the Mobo Battery thinking that it was not remembering the boot sequence
4.Checked that the Hard Drives are connected to the correct plugs (6-7) on the motherboard, and that the raid connector JP1 was shorted out for Raid 0 and the blue indicator light was flashing.
* Just a note in this area. I did set up the Raid 0 with a tech from MSI because I was having an issue with the initial set up, and I did use the Nvidia raid drivers that came with the motherboard. Pchas01 in another thread thought that this could be part of the issue because it is not necessary to load the drivers when you set up the Motherboard in the Raid mode.
F10 and look in the Raid Array
5. Pulled the jumper off of JP1 and it just went to the "Reboot and select proper boot device or insert boot media in selected boot device and press a key" screen much faster, but would never boot up after 5 tries. Put the jumper back in and started up on the 2nd try like the normal problem.
6.Went into the On-Chip ATA devices in the bios and Changed the Raid Mode to an IDE, I cannot F10 and get into the Raid Array now, but I guess that is normal.
Now this is what my boot sequence currently looks like.
That is the point that I am right now. It runs great, games are awesome on it. Its just does not want to start up on the 1st attempt.
Thanks for any help on this
Chris aka Fritzpeed novice builder

Thanks for the reply,
I started with the easy fixes first, changed the sata cables, and tried different power supply connectors. Both tests had same results, still boots up on 2nd try. I did not know how soon the problem would re-occur after it has been shut down, my shortest time so far is 25 minutes.
Quote
Why only one RAID channel is enabled? Array can't be detected in that way...
Well right now, it is not even set up that way, in my #6 problem solving, it was suggested that I turn the Raid Mode off and try [IDE] to see if that made a difference,"because I don't need Raid enabled for the hardware raid". It did not, it only booted to the "Reboot and select proper boot device or insert boot media in selected boot device and press a key" window about 60 seconds faster. It is currently set up in this way.
This is how it looks in my On-Chip ATA Devices
How do I check this?
Quote
Does the problem persist when you use Silicon RAID instead Nvidia RAID?
I am still working on getting the seagate diagnostics to work, I am getting an error message before I can even test them.
I do have another question. Why is my HP Printer showing up in the Hard drive test, and also why is it showing up in my boot sequence, is this normal?
And speaking of boot sequences I got in there again just now and saw 2 [USB:HP Photosm]
Thanks again, still working on testing hard drives.
Chris

Hard drive detected but will not boot Windows Vista or recovery disk

Hi,
I have a very similar issue with a HP Pavillion a6355.uk, the hard drive kept crshing windows and then it finally just kept getting pass the HP boot menu options, and then all I get is the DOS "@press ctrl+alt+del to restart".
The hard drive is detected and passes all the tests, after pressing F9, going into the F10 options. F11 does not do anything, so cannot recover windows/the system.
I have tried changing the SATA connections on the motherboard, no difference. I tried the recovery boot disk I created when it was working and it will not boot with the old or new hard drive I bought to replace it (same size and compatable).
I cannot find where to partition the new hard drive or format the c: on the old one (it had D: for the recovery, but as it won't boot, cannot access this).
I have also tried the HP website to dowload the drivers for the new one, but the page does not load up to show any drivers or Windows to download.
http://support.hp.com/gb-en/product/HP-Pavilion-a6300-Desktop-PC-series/3644673/model/3671505/driver...
The next page just keeps looping or not proceeding when I put in details.
I can’t find anywhere to get hold of my copy of windows vista for this PC or get a disk to re-install on a new drive or fix the old detected drive, can someone please help!!

Just what size HD and is the drive Sata II or Sata III?
Vista 32bit .iso You must have a valid installation key, which should be on the COA sticker on the computer, to activate the installation once it completes. ImageBurn to create the .iso disk. Driver page Vista (not 64 bit)
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

White Macbook 13" will not boot - Stuck in Safe Boot mode

In a nutshell --
macbook will not boot. Originally it was stuck on the gray screen with spinning wheel. Here is the course of action taken thus far (in order)
1. Reset SMC -- removed battery, pushed power button for 5-1 seconds. Rrestsarted. Nothing. Still with the gray screen etc.
2. Tried to restart in Safe Boot mode. -- Macbook will restart and after 25% on the status bar it hangs up. After a 5 minutes or so it shuts down (I assume form overheating as the fan is running wild.)
3. Wheneve I start it now it tires to go in safe mode so I tired to zap the PRAM (opt/command/p/r) No luck. Tried twice. Once after three chimes. Once after 2 chimes. Still tries to boot in safe mode.
4. Tried Recovery Mode (I am running Mountain Lion). Can boot into recovery mode. Ran disk repair and it said all was fine. Would not allow me to repair permissions but I could verify them. I ran verify. No messages came up at all -- thought this was strange. I also tried to re-install the OS but the first time the only disk available to me was the recovery partition. The second time I went into Recovery mode I saw the regular Hard Drive partition but it was grayed out and locked. Considered restarting to an external USB drive but then did not know what I would do then. Might try this tomorrow.
5. Ran Target disk mode with my iMac. The disk did not mount in the desktop but showed up in disk utility with the HD partition grayed out. Could verify and repair disk but nothing was allowed regarding permissions -- all options grayed out.
6. Restarted with Verbose mode. Ran for 5 - 10 minutes and shut down. Last line I saw was "checking extended attributes file" No error message. Again, maybe it was an overheating issue as the fans were going wild and it was about the same length of tome running as in safe mode when the macbook shut down.
OK. The hard drive is a few moths old. There was nothing strange going on with the hard drive prior to shut down. The only odd thing happening was the dvd drive was begining to make sounds upon restart (from sleep or full restart). Like it was checking/reading a disk in the drive. This was especially odd as the drive has been dead/unusable for a few years. (When you a dvd or cd in it could not read). This dvd drive sound happens even now upon each start up.
I do not want a new motherboard.......or laptop.
Thanks.
Robert

Thanks for the prompt response. Thanks for the adivice. I wish i could get it to go into safe mode. It stops after 5 minutes of trying. I am not sure if it is the hard drive as it will boot into Reocvery Mode -- meaning it will let me access the 650 MB parititon Lion has set aside - so that part of the disk is working.
I am headed to the Geniusues soon.

Help please. My mac book pro did a java update and now will not boot oot.

As it says above. Since doing a java update automatically and then shutting down on me.. my mac book will not boot properly.
I can get it to boot in safe mode eventually, usually after 5 to 10 mins of waiting, but will not boot into mormal mode.
How do i cure this?.   I have tried disk utility and this saus alls ok.

Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid pixel format
Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid context
Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid pixel format
Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid context
Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:09.426 firefox[229:903] invalid pixel format
Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:09.430 firefox[229:903] invalid context
Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:09.430 firefox[229:903] invalid pixel format
Mar 8 13:01:09 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:09.431 firefox[229:903] invalid context
Mar 8 13:01:12 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Cache file /System/Library/Caches/com.apple.kext.caches/Directories//System/Library/Extens ions/KextIdentifiers.plist.gz is out of date; not using.
Mar 8 13:01:12 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Rescanning kernel extensions.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleTyMCEDriver.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleTyMCEDriver.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleTyMCEDriver failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleSMBusPCI.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleSMBusPCI.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleSMBusPCI failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load GeForce.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load GeForce.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.GeForce failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleMCCSControl.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleMCCSControl.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleMCCSControl failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleProfileFamily.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleProfileFamily.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.iokit.AppleProfileFamily failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleIntelMeromProfile.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleIntelMeromProfile.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleIntelMeromProfile failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load IOFireWireIP.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load IOFireWireIP.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.iokit.IOFireWireIP failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load SMCMotionSensor.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load SMCMotionSensor.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.SMCMotionSensor failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleSMCLMU.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleSMCLMU.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.kext.AppleSMCLMU failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load GeForce.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load GeForce.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.GeForce failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleHDAController.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleHDAController.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleHDAController failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleUpstreamUserClient.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleUpstreamUserClient.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleUpstreamUserClient failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AudioIPCDriver.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AudioIPCDriver.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AudioIPCDriver failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleIntelNehalemProfile.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleIntelNehalemProfile.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleIntelNehalemProfile failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load IOBluetoothSerialManager.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load IOBluetoothSerialManager.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleIntelPenrynProfile.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleIntelPenrynProfile.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleIntelPenrynProfile failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleIntelPenrynProfile.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleIntelPenrynProfile.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleIntelPenrynProfile failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load IOSurface.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load IOSurface.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.iokit.IOSurface failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleIntelYonahProfile.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleIntelYonahProfile.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleIntelYonahProfile failed; removing personalities.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Can't load AppleIntelYonahProfile.kext - validation problems.
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Failed to load AppleIntelYonahProfile.kext - (libkern/kext) validation failure (plist/executable).
Mar 8 13:01:14 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Load com.apple.driver.AppleIntelYonahProfile failed; removing personalities.
Mar 8 13:01:30 ROBERT-HUSKINSONs-MacBook-Pro mds[20]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Mar 8 13:01:59: --- last message repeated 8 times ---
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid pixel format
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:59.580 firefox[229:903] invalid pixel format
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid context
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:59.581 firefox[229:903] invalid context
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid pixel format
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:59.582 firefox[229:903] invalid pixel format
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro firefox[229]: invalid context
Mar 8 13:01:59 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: 2013-03-08 13:01:59.582 firefox[229:903] invalid context
Mar 8 13:07:54 ROBERT-HUSKINSONs-MacBook-Pro [0x0-0x14014].org.mozilla.firefox[0]: NOTE: child process received `Goodbye', closing down
Mar 8 13:09:20 ROBERT-HUSKINSONs-MacBook-Pro mds[20]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
Mar 8 13:09:57 ROBERT-HUSKINSONs-MacBook-Pro com.apple.launchd.peruser.501[105] (com.apple.AirPortBaseStationAgent[127]): Exited: Killed
Mar 8 13:09:57 ROBERT-HUSKINSONs-MacBook-Pro loginwindow[22]: DEAD_PROCESS: 22 console
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Cache file /System/Library/Caches/com.apple.kext.caches/Directories//System/Library/Extens ions/KextIdentifiers.plist.gz is out of date; not using.
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro com.apple.kextd[9]: Rescanning kernel extensions.
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro shutdown[252]: reboot by roberthuskisnon:
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro shutdown[252]: SHUTDOWN_TIME: 1362748198 226066
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro mDNSResponder[21]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) stopping
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro DirectoryService[32]: BUG in libdispatch: 10K549 - 1960 - 0x10004004
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro WindowServer[71]: hidd died. Reestablishing connection.
Mar 8 13:09:58 ROBERT-HUSKINSONs-MacBook-Pro WindowServer[71]: Unable to create event queue via hidd: (0x10000003)
Mar 8 13:10:17 localhost com.apple.kextd[10]: Cache file /System/Library/Caches/com.apple.kext.caches/Directories//System/Library/Extens ions/KextIdentifiers.plist.gz is out of date; not using.
Mar 8 13:10:12 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 8 13:10:12 localhost com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
Mar 8 13:10:22 localhost bootlog[38]: BOOT_TIME: 1362748212 0
Mar 8 13:10:22 localhost blued[39]: Apple Bluetooth daemon started
Mar 8 13:10:30 localhost /Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate[45]: AlreadyRegistered
Mar 8 13:10:30 localhost mDNSResponder[23]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Mar 8 13:10:30 localhost com.apple.usbmuxd[16]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
Mar 8 13:10:40 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: setting hostname to "ROBERT-HUSKINSONs-MacBook-Pro.local"
Mar 8 13:10:40 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: network configuration changed.
Mar 8 13:12:08 ROBERT-HUSKINSONs-MacBook-Pro diskarbitrationd[33]: unable to repair /dev/disk0s3 (status code 0x00000008).
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer: timed out waiting for IOKit to quiesce
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer: Busy services :
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3 [2]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert [9]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/CPU0@0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/CPU0@0/AppleACPICPU [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/CPU1@1 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/CPU1@1/AppleACPICPU [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PNLF [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI [20]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/MCHC@0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/MCH2@0,1 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/LPCB@3 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IMAP@3,1 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SBUS@3,2 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P4MI@3,3 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/TRIM@3,4 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/NVPM@3,5 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/OHC1@4 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC1@4,1 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/OHC2@6 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@6,1 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/HDEF@8 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/pci-bridge@9 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/GIGE@A [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP01@C [2]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP01@C/IOPCI2PCIBridg e [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP01@C/IOPCI2PCIBridg e/GFX0@0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IXVE@10 [2]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IXVE@10/IOPCI2PCIBrid ge [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IXVE@10/IOPCI2PCIBrid ge/IGPU@0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP04@15 [2]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP04@15/IOPCI2PCIBrid ge [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP04@15/IOPCI2PCIBrid ge/ARPT@0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@16 [2]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@16/IOPCI2PCIBrid ge [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@16/IOPCI2PCIBrid ge/FRWR@0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@16/IOPCI2PCIBrid ge/FRWR@0/AppleFWOHCI [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@16/IOPCI2PCIBrid ge/FRWR@0/AppleFWOHCI/IOFireWireController [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP05@16/IOPCI2PCIBrid ge/FRWR@0/AppleFWOHCI/IOFireWireController/IOFireWireLocalNode [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/SMC [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/ALS0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/SMS0 [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/AppleACPIPlatformExpert/GMUX [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer:   MacBookPro5,3/IOResources [1]
Mar 8 13:12:09 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: InterfaceNamer: No network stack object
Mar 8 13:12:16 ROBERT-HUSKINSONs-MacBook-Pro SophosAntiVirus[43]: reloading scheduled scans...
Mar 8 13:12:19 ROBERT-HUSKINSONs-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[24]: Login Window Application Started
Mar 8 13:13:11 ROBERT-HUSKINSONs-MacBook-Pro kernel[0]:
Mar 8 13:14:02: --- last message repeated 3 times ---
Mar 8 13:14:01 ROBERT-HUSKINSONs-MacBook-Pro diskarbitrationd[33]: unable to mount /dev/disk0s3 (status code 0x00000047).
Mar 8 13:14:01 ROBERT-HUSKINSONs-MacBook-Pro XProtectUpdater[14]: NSURLConnection error: Error Domain=NSURLErrorDomain Code=-1001 UserInfo=0x102c05c80 "The request timed out." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1001 UserInfo=0x102c0bf90 "The request timed out.")
Mar 8 13:14:01 ROBERT-HUSKINSONs-MacBook-Pro com.apple.launchd[1] (com.apple.xprotectupdater[14]): Exited with exit code: 255
Mar 8 13:14:01 ROBERT-HUSKINSONs-MacBook-Pro configd[36]: network configuration changed.
Mar 8 13:14:01 unknown configd[36]: setting hostname to "unknown"
Mar 8 13:14:02 unknown com.apple.launchd[1] (com.apple.aslmanager): Throttling respawn: Will start in 10 seconds
Mar 8 13:14:09 unknown loginwindow[24]: Login Window Started Security Agent
Mar 8 13:16:15 unknown kernel[0]:
Mar 8 13:16:15 unknown kernel[0]:
Mar 8 13:19:11: --- last message repeated 2 times ---
Mar 8 13:17:06 unknown com.apple.launchd[1] (com.apple.aslmanager): Throttling respawn: Will start in 9 seconds
Mar 8 13:19:11 unknown kernel[0]:
Mar 8 13:20:03: --- last message repeated 3 times ---
Mar 8 13:20:01 unknown loginwindow[24]: Login Window - Returned from Security Agent
Mar 8 13:20:01 unknown com.apple.launchd[1] (com.apple.aslmanager): Throttling respawn: Will start in 10 seconds
Mar 8 13:20:01 unknown loginwindow[24]: USER_PROCESS: 24 console
Mar 8 13:20:02 unknown PenTabletDriver[103]: _NXTermWindow: error releasing window (268451844)
Mar 8 13:20:02 unknown com.apple.launchctl.Aqua[135]: launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
Mar 8 13:20:02 unknown com.apple.launchd.peruser.501[133] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 8 13:20:02 unknown com.wacom.pentablet[103]: 2013-03-08 13:20:02.272 PenTabletDriver[103:1607] _NXTermWindow: error releasing window (268451844)
Mar 8 13:20:13 unknown mds[22]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
Mar 8 13:20:15 unknown fontd[163]: Database content version mismatch (stored(15) != expected(14))
Mar 8 13:20:15 unknown fontd[163]: Failed to open read-only database, regenerating DB
Mar 8 13:20:15 unknown com.apple.launchd.peruser.501[133] (com.apple.Kerberos.renew.plist[152]): Exited with exit code: 1
Mar 8 13:20:15 unknown com.apple.launchd.peruser.501[133] (com.apple.mrt.uiagent[151]): Exited with exit code: 255
Mar 8 13:20:16 unknown com.apple.launchd.peruser.501[133] (0x100300e50.mach_init.switchboard.sh): Failed to check-in!
Mar 8 13:20:22 unknown com.apple.launchd[1] (com.wacom.pentablet[103]): Exit timeout elapsed (20 seconds). Killing
Mar 8 13:20:22 unknown com.apple.launchd[1] (com.wacom.pentablet[103]): Job has overstayed its welcome. Forcing removal.
Mar 8 13:20:22 unknown com.apple.launchd[1] (com.wacom.pentablet): Bug: launchd_core_logic.c:1114 (24498):0
Mar 8 13:20:49 unknown WindowServer[86]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 8 13:20:49 unknown com.apple.WindowServer[86]: Fri Mar 8 13:20:49 unknown WindowServer[86] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Mar 8 13:20:49 unknown ConsumerTouchDriver[176]: Unknown class 'OBezelWindowGradientBackgroundFadeLeft', using 'NSView' instead. Encountered in Interface Builder file at path /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app/C ontents/Resources/English.lproj/BezelWindowContent.nib.
Mar 8 13:20:49 unknown ConsumerTouchDriver[176]: Unknown class 'OBezelWindowGradientBackgroundFadeRight', using 'NSView' instead. Encountered in Interface Builder file at path /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app/C ontents/Resources/English.lproj/BezelWindowContent.nib.
Mar 8 13:20:49 unknown ConsumerTouchDriver[176]: Unknown class 'OBezelWindowGradientBackgroundFadeLeft', using 'NSView' instead. Encountered in Interface Builder file at path /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app/C ontents/Resources/English.lproj/BezelWindowContent.nib.
Mar 8 13:20:49 unknown ConsumerTouchDriver[176]: Unknown class 'OBezelWindowGradientBackgroundFadeRight', using 'NSView' instead. Encountered in Interface Builder file at path /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app/C ontents/Resources/English.lproj/BezelWindowContent.nib.
Mar 8 13:20:49 unknown com.wacom.pentablet[155]: TabletDriver[155]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
Mar 8 13:20:49 unknown TabletDriver[155]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
Mar 8 13:20:51 unknown TabletDriver[155]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
Mar 8 13:20:51 unknown com.wacom.pentablet[155]: TabletDriver[155]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
Mar 8 13:20:53 unknown com.apple.fontd[163]: FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
M

Bios recovery - Computer will not boot up

I have a HP Pavilion HPE H8-1145-SC, my bios will not boot.
I was wondering if there are any ways of changing the jumper setting on the motherboard ( IPISB-CH2) to fix this issue if so how do I do it? or are there any other types of recoveries that I can do.
I have searched the forum for answers and tried some such as taking the battery out and putting it back in but it hasn't worked.

You could not get a boot menu when using a boot disk, any messages on the black screen at the bottom? Could you do me a fav and take a pic of that black screen and post it. I think... not sure yet but this can be your memory.
I would ask for you to preform a memory test using memtest86 but if one disk does not boot this may not either. But still worth a try. If you burn a memtest86 disk and reboot see if it boots into the memory, if not the issue is memory most likely. Do you know how many GB of ram you have installed?
Do you feel like you can opening your case and removing memory dimms? If you have a bad one this may stop it from booting. I hope the memtest86 works cause it would detect that. Windows 7 can boot on 2 GB. If you have say 6Gb than each dimm would be 2GB taking out one at a time keeping one in and see if it boots.
http://www.memtest.org/#downiso
In the window about the first list download the zip Iso and burn it to a CD
** Memtest86+ V5.01 (27/09/2013)**
pre-compiled bootable binary (.zip)
If you feel that this would not work I suggest taking your system to a PC repair shop and have them test the memory.

HP A1620N will not boot up

I asked for help last year with my computer that would not boot up. I have finally returned to work on it. It is an HP a1620n with windows xp. I had to install a new ps. Computer still will not boot up, it just gives me the blue hp invent screen. bought and used new thermal paste. Still nothing. Removed and reinstalled memory. No luck. Tried constantly tapping f1, esc, f8, f10, f12 while computer is powering up. No good. Removed hard drive and put it in an external case. Can look at some stuff but not everything. Not sure if its a hardware problem or a software problem.
Any help would be appreciated.
Thank you,
nissan84pu

Hello again Nissan84pu,
I did go back and look at your previous post about what you have done; I did read where you took the original motherboard out but ended up putting it back in because another board did the same thing. Also see where you have worked on the processer, ram and replaced the power supply, about the only other you really haven’t tested is the hard drive and I would say that would probably be you’re next step.
What is kind of odd is that you haven’t been able to access the bios on the startup that been the most worrisome thing to me. Have you been able to access the bios menu and I’m just not aware of it?
Please respond at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

G5 will not boot into OSX - stays at a command-line prompt

My G5 will not boot into OS X. I would appreciate and and all advice. Thanks.
What happened:
I had the G5 running one morning, with the Isight camera on, plugged into the front-console firewire port. I was running EvoCam software.
At about 2 hours into running, the cam stopped broadcasting – I got home to check it out three hours later, and the screen was black, and the fan was louder than I had ever, ever heard it on this box.
I did a hard shut-down with the powerbutton on the Cinema Display monitor.
At reboot, I see a grey screen for approx 5 seconds, with a dark grey apple logo, and then the screen goes to black, with a command-line prompt.
It’s been like that ever since.
I ran the Apple Hardware test, from the internal CD drive, and it shows no errors.
I cannot boot from an OSX installer DVD. It won’t recognize it. It goes straight to the black screen and Command line prompt.
I have re-seated the RAM, as well as the Airport Card. The only other card – which I have not re-seated, it the video card.
I am able to use the machine in Target Mode, so I can extract data from the drives, which is great. Oddly enough, I’m able to use the front-console firewire port to connect to my other Mac in Target mode – with no problems. Also – in Target mode, the fan never goes above the usual quiet self.
I would appreciate any advice one can provide. Thanks!
The machine:
Mac G5 dual 2.0 – First Generation (purchased December 2003)
It’s on it’s 3rd Motherboard – and now it’s fully out of Applecare warrantee.
OSX 10.4.9
4GB Ram
2 internal drives: 160GB + 300GB
Airport Extreme
20” Cinema Display (first generation)
Mac G5 dual 2.0 – First Generation Mac OS X (10.4.9)

Well, Apple Support does have articles on:
Isolating Issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=25392
won't boot or login
http://docs.info.apple.com/article.html?artnum=106464#symp1
And if those don't work, call.
With G4 there is/was
"Fix for a Mac that won't power up
Mirrored Doors G4. When you pressed the power button, the button would light up, but the computer would not turn on. The fans on the power supply wouldn't turn on.
FIX: unplug the machine, pull the clock battery, hit the power button to discharge. Then plug it in without the clock battery. The machine should boot perfectly. Shut down, reinstall the clock battery, and now the system is fully functional. Macosxhints
http://docs.info.apple.com/article.html?artnum=300552
Reseat video? try another video card?
My Step #1 is to always boot into Open Firmware (and do reset-nvram, reset-all, if you can't do that, you are sunk).
Oh, and What do you see in verbose mode on startup?
Mac Pro 2GHz 4GB 10K Raptor 23" Cinema Mac OS X (10.4.9) WD RE RAID Aaxeon FW800 PCIe MDD-G4 APC RS1500 Vista

Operating reference system will not boot.

hi! bought the iphone 4s in Italy and it does not work. Operating reference system will not boot. Change of firmware and restore did not help. How can I change it while in Russia. Can I send in the mail store??

Hi NcBunky,
Are you using Win 7 64 bit? Did you update the Texas Instruments (TI) USB 3.0 XHCI Host Controller?
I have an H8 1380t PC. Updated the TI USB 3.0 driver and had the same problem.
When booting the PC with the USB 3.0 external drive connected to the PC the PC would not boot. When booting the PC with only the mouse, keyboard, and a USB 2.0 external drive attached the PC would boot. Once booted you could attach the USB 3.0 drive and it worked fine.
Solution was to roll back (reinstall) the TI USB 3.0 XHCI Host Controller to the original factory installed driver.
System now boots with the external USB 3.0 drive attached.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

System will not boot or POST

I have a Pavilion A8 Vision that will not boot or complete POST and does not communicate in any way. Fans are on, sounds from drives seems like beginning of POST. I have removed and replaced RAM with other piece - no change. When RAM is out of motherboard system will report 5 long beeps and repeat the beeps for 4 to 5 times. Need help and/or advice on replacement of components.

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer is not able to start up properly, and that it is emitting a BIOS beep code. I would be happy to assist you in this matter! According to the information in this resource on BIOS Beep Codes, 5 long beeps indicate that 'fatal errors related to the operation of critical motherboard components - such as teh CPU' have become defective. To correct this issue, I recommend contacting our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

Motherboard will not boot up@133

Similar Messages

Maybe you are looking for