Motif Ad Kit

I have been tasked with creating expandable ads for my
company. We will be using Motif to track the data for us.
Here are some examples of the type of ads we want to build:
http://www.pointroll.com/PointRoll/AdDemo/Hallmark/Hallmark_MothersDay_300x250_600x250_Wht _FB_DERIVEpd3.asp
http://www.pointroll.com/PointRoll/AdDemo/Pfizer/ChantixPfizer-2007-Q2_ConceptA_728x90_FB_ DERIVEpd2.asp
http://www.pointroll.com/PointRoll/AdDemo/Pfizer/ListerineAgentCoolBlue1h07_728x90_Dentist _FB_AOL_KOL_Trgted_Audiences_Kids_Activities_Interests_KOLld3.asp
http://www.pointroll.com/PointRoll/AdDemo/HomeDepot/HomeDepot_Sisters_728x90_315_FB_UI_DEM Opd2.asp
My problem is that I cannot open the tutorial files to learn
how to make these kinds of banners.
I can open the tutorial files in Flash CS3, but I cannot view
the Motif Ad Kit Panel.
On the other hand, I can open the panel in Flash MX 2004, but
cannot open the tutorial files here. I even had someone at
DoubleClick save the files for me as Flash MX 2004. They still do
not work.
Does anyone have a suggestion on how to learn how to build
these types of banners?
Here is where I have downloaded Ad Kit 3.0 as well as the
tutorials.
http://www.dartmotif.com/downloads/downloads.asp?login=req

Well, when I used the Motif AdKit and supplied the files to
Dart, they disassembled the files anyway and reassembled them so I
think you can create your expandable ad yourself and ask them to do
the functionality. The problem is that I believe there is a charge
for it, depending on who the end client is. If Dart is making a lot
of money off of the client, I believe they will waive the fee.
Pointroll is easy to sign up with. The best thing to do is
get in touch with their support team and ask them the questions you
have about setting up a file and if they can support Dart or not. I
seem to recall that they do but, of course, Dart is their
competitor so Dart may say that they are not compatible. Both
companies make their software free to the designer. It's the
company who is doing the advertising who pays.
Good luck!

Similar Messages

  • Dart Motif Ad Kit

    Wondering if anyone else has noticed this problem before.
    When I have the Motif Ad Kit panel up in the authoring environment,
    I have problems entering anything in the x, y, h, w fields in the
    property panel and the transform panel. The problem seemed to go
    away when I closed the panel but I just wanted to put out feelers
    to see if it was just me or my setup.

    Thanks for the links. I've downloaded everything I can from
    DART, and I built my ad. Problem: when the .swf is uploaded to the
    live website, it doesn't work properly. The entire ad is viewable
    (even though there is no content in the part that's supposed to be
    expandable). When you click on it, it does show the expandable
    portion, however the entire time, the Collapsed portion is off the
    side of the page. I'm not sure how to correct this problem.
    Any help is greatly appreciated!

  • OFM 11.1.2 installation issue on HP-UX 11.31

    Hello all. Been trying to install OFM 11.1.2 on HP-UX for a few hours, but I am facing a problem at the linking phase of the installation. It throws an exception which reads "Error invoking target 'frmweb_install_frmcmp_install frmcmpb_install frmctrl_install' of makefile ...". When I got to the make.log file, it shows this:
    ld: Can't find library for -lXm
    Fatal error.
    *** Error exit code 1
    stop.
    I have been through notes, 180445.1, 169177.1, 151547.1, et'all which they all recommend creating soft links to the latest Motif/X11/etc libraries, which I have already done, but the problem still persist. Also, at the prerequisites phase, on the first screen, it complains that I am missing some system packages, named B3394BA 2.1.0, which is Motif Development Kit. Strange thing is, that this is HP-UX 11.31 with the base quality pack bundle of March of 2010 and this kit is for versions pre-v3 (11.31), it is not even avaliable for this version. So, does any of you have any idea why the installation is complaining about this issue and any guideline on how to correct it ? Should I open a tar ?
    I am willing to provide any kind of info for anyone who request it in order to help me out on this.
    Thanks for any help!

    Hi, the possible workaround is:
    Loggin as root
    Set umask to 222
    server:/> umask 222
    Change Dir:
    server:/> cd /usr/lib/hpux64
    Create Links Simboliks:
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libX11.so.1 libX11.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXm.so.1 libXm.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXIE.so.1 libXIE.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXaw.so.1 libXaw.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXext.so.1 libXext.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXhp11.so.1 libXhp11.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXi.so.1 libXi.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXmu.so.1 libXmu.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXp.so.1 libXp.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXt.so.1 libXt.so
    server:/usr/lib/hpux64> ln -s /usr/lib/hpux64/libXtst.so.1 libXtst.so
    ... Retry relink with installer
    Atte.
    FRJR - SNGTC - VZLA

  • SUNW_piclfrutree PICL plugin module failed

    Has anyone ever see this picld error message after trying to start picld manually? I just had to install the picl packages, fru packages, along with some masf packages to get SNMP working. This worked without any problems on all of our Solaris 8 Netra 440s except this one. It is affecting prtdiag too. I have included some output from my troubleshooting. I have tried unintstalling and reinstalling all of the packages without any progress.
    Message file errors after starting picld
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed
    # uname -a
    SunOS XXXXXXX 5.8 Generic_117350-35 sun4u sparc SUNW,Sun-Fire-V440
    #pkgnfo | grep picl
    system SUNWpiclh PICL Header Files (Usr)
    system SUNWpiclr PICL Framework (Root)
    system SUNWpiclu PICL Libraries, and Plugin Modules (Usr)
    # pkginfo | grep fru
    system SUNWfruid FRU ID Utility and Library (Usr)
    system SUNWfruip FRU ID Platform Modules (Usr)
    system SUNWfruix FRU ID Library (64-bit)
    system SUNWmfrun Motif RunTime Kit
    # for i in SUNWpiclh SUNWpiclr SUNWpiclu ; do
    pkginfo -l $i
    donePKGINST: SUNWpiclh
    NAME: PICL Header Files (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Header Files
    PSTAMP: on28-patch20031120190706
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 4 installed pathnames
    2 shared pathnames
    2 directories
    20 blocks used (approx)
    PKGINST: SUNWpiclr
    NAME: PICL Framework (Root)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Framework init scripts
    PSTAMP: on28-patch20000705132920
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 7 installed pathnames
    4 shared pathnames
    2 linked files
    4 directories
    1 executables
    1 blocks used (approx)
    PKGINST: SUNWpiclu
    NAME: PICL Libraries, and Plugin Modules (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.08.15.00.06
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Daemon, Libraries, prtpicl client and plug-in modules
    PSTAMP: on28-patch20031124203414
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 242 installed pathnames
    67 shared pathnames
    73 directories
    35 executables
    4279 blocks used (approx)
    # for i in SUNWfruid SUNWfruip SUNWfruix SUNWmfrun ; do
    pkginfo -l $i
    donePKGINST: SUNWfruid
    NAME: FRU ID Utility and Library (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID prtfru command and libfru library
    PSTAMP: on28-patch20031120190642
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 14 installed pathnames
    3 shared pathnames
    3 directories
    6 executables
    555 blocks used (approx)
    PKGINST: SUNWfruip
    NAME: FRU ID Platform Modules (Usr)
    CATEGORY: system
    ARCH: sparc.sun4u
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID platform data module and access library
    PSTAMP: on28-patch20031211193309
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 83 installed pathnames
    60 shared pathnames
    60 directories
    4 executables
    359 blocks used (approx)
    PKGINST: SUNWfruix
    NAME: FRU ID Library (64-bit)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID Library (64-bit)
    PSTAMP: on28-patch20031120190646
    INSTDATE: Aug 04 2006 14:19
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 11 installed pathnames
    3 shared pathnames
    3 directories
    4 executables
    616 blocks used (approx)
    PKGINST: SUNWmfrun
    NAME: Motif RunTime Kit
    CATEGORY: system
    ARCH: sparc
    VERSION: 2.1.1,REV=10.1999.12.02
    BASEDIR: /usr
    VENDOR: SunSoft, Inc.
    DESC: Motif 2.1.1 libraries, headers, xmbind and bindings
    PSTAMP: togos19991202021129
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 256 installed pathnames
    6 shared pathnames
    14 directories
    6 executables
    12644 blocks used (approx)
    Bad prtdiag output
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    Prtdiag failed!
    System Configuration: Sun Microsystems sun4u Netra 440
    System clock frequency: 183 MHZ
    Memory size: 8GB
    ==================================== CPUs ====================================
    E$ CPU CPU Temperature Fan
    CPU Freq Size Impl. Mask Die Ambient Speed Unit
    0 1281 MHz 1MB US-IIIi 2.4 - -
    1 1281 MHz 1MB US-IIIi 2.4 - -
    2 1281 MHz 1MB US-IIIi 2.4 - -
    3 1281 MHz 1MB US-IIIi 2.4 - -
    ================================= IO Devices =================================
    Bus Freq
    Brd Type MHz Slot Name Model
    0 pci 66 0 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 3 pci100b,35 (network) SUNW,pci-qge
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/rmc-comm-rmc_comm (seria+
    0 pci 33 13 pci10b9,5229 (ide)
    ============================ Memory Configuration ============================
    Segment Table:
    Base Address Size Interleave Factor Contains
    0x0 2GB 4 BankIDs 0,1,2,3
    0x1000000000 2GB 4 BankIDs 16,17,18,19
    0x2000000000 2GB 4 BankIDs 32,33,34,35
    0x3000000000 2GB 4 BankIDs 48,49,50,51
    Bank Table:
    Physical Location
    ID ControllerID GroupID Size Interleave Way
    0 0 0 512MB 0,1,2,3
    1 0 1 512MB
    2 0 1 512MB
    3 0 0 512MB
    16 1 0 512MB 0,1,2,3
    17 1 1 512MB
    18 1 1 512MB
    19 1 0 512MB
    32 2 0 512MB 0,1,2,3
    33 2 1 512MB
    34 2 1 512MB
    35 2 0 512MB
    48 3 0 512MB 0,1,2,3
    49 3 1 512MB
    50 3 1 512MB
    51 3 0 512MB
    Memory Module Groups:
    ControllerID GroupID Labels
    0 0 -,-
    0 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    1 0 -,-
    1 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    2 0 -,-
    2 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    3 0 -,-
    3 1 -,-
    Truss output after starting picld
    #( /etc/init.d/picld start ; while : ; do
    truss -U /usr/lib/picl/picld -U :: -p `pgrep picld`
    pstack `pgrep picld`
    echo '###################################'
    done )>/tmp/truss.out 2>&1# Output too large to attach..
    # ps -aef | grep -i picld
    root 8171 18519 0 16:45:07 pts/6 0:00 grep -i picld
    root 27299 1 0 15:59:18 ? 0:01 /usr/lib/picl/picld
    root 8167 27296 0 16:45:06 pts/1 0:00 truss -U /usr/lib/picl/picld -U :: -p 27299
    # prtpicl
    prtpicl: picl_initialize failed: Daemon not responding
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    picl_initialize failed: Daemon not responding
    # pgrep picld
    27299
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed

    Has anyone ever see this picld error message after trying to start picld manually? I just had to install the picl packages, fru packages, along with some masf packages to get SNMP working. This worked without any problems on all of our Solaris 8 Netra 440s except this one. It is affecting prtdiag too. I have included some output from my troubleshooting. I have tried unintstalling and reinstalling all of the packages without any progress.
    Message file errors after starting picld
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 15:29:09 XXXXXXX picld[15996]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 15:29:10 XXXXXXX picld[15996]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed
    # uname -a
    SunOS XXXXXXX 5.8 Generic_117350-35 sun4u sparc SUNW,Sun-Fire-V440
    #pkgnfo | grep picl
    system SUNWpiclh PICL Header Files (Usr)
    system SUNWpiclr PICL Framework (Root)
    system SUNWpiclu PICL Libraries, and Plugin Modules (Usr)
    # pkginfo | grep fru
    system SUNWfruid FRU ID Utility and Library (Usr)
    system SUNWfruip FRU ID Platform Modules (Usr)
    system SUNWfruix FRU ID Library (64-bit)
    system SUNWmfrun Motif RunTime Kit
    # for i in SUNWpiclh SUNWpiclr SUNWpiclu ; do
    pkginfo -l $i
    donePKGINST: SUNWpiclh
    NAME: PICL Header Files (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Header Files
    PSTAMP: on28-patch20031120190706
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 4 installed pathnames
    2 shared pathnames
    2 directories
    20 blocks used (approx)
    PKGINST: SUNWpiclr
    NAME: PICL Framework (Root)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.07.05.13.22
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Framework init scripts
    PSTAMP: on28-patch20000705132920
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 7 installed pathnames
    4 shared pathnames
    2 linked files
    4 directories
    1 executables
    1 blocks used (approx)
    PKGINST: SUNWpiclu
    NAME: PICL Libraries, and Plugin Modules (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2000.08.15.00.06
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: PICL Daemon, Libraries, prtpicl client and plug-in modules
    PSTAMP: on28-patch20031124203414
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 242 installed pathnames
    67 shared pathnames
    73 directories
    35 executables
    4279 blocks used (approx)
    # for i in SUNWfruid SUNWfruip SUNWfruix SUNWmfrun ; do
    pkginfo -l $i
    donePKGINST: SUNWfruid
    NAME: FRU ID Utility and Library (Usr)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID prtfru command and libfru library
    PSTAMP: on28-patch20031120190642
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 14 installed pathnames
    3 shared pathnames
    3 directories
    6 executables
    555 blocks used (approx)
    PKGINST: SUNWfruip
    NAME: FRU ID Platform Modules (Usr)
    CATEGORY: system
    ARCH: sparc.sun4u
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID platform data module and access library
    PSTAMP: on28-patch20031211193309
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 83 installed pathnames
    60 shared pathnames
    60 directories
    4 executables
    359 blocks used (approx)
    PKGINST: SUNWfruix
    NAME: FRU ID Library (64-bit)
    CATEGORY: system
    ARCH: sparc
    VERSION: 11.8.0,REV=2001.01.19.01.02
    BASEDIR: /
    VENDOR: Sun Microsystems, Inc.
    DESC: FRU ID Library (64-bit)
    PSTAMP: on28-patch20031120190646
    INSTDATE: Aug 04 2006 14:19
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 11 installed pathnames
    3 shared pathnames
    3 directories
    4 executables
    616 blocks used (approx)
    PKGINST: SUNWmfrun
    NAME: Motif RunTime Kit
    CATEGORY: system
    ARCH: sparc
    VERSION: 2.1.1,REV=10.1999.12.02
    BASEDIR: /usr
    VENDOR: SunSoft, Inc.
    DESC: Motif 2.1.1 libraries, headers, xmbind and bindings
    PSTAMP: togos19991202021129
    INSTDATE: Aug 04 2006 10:38
    HOTLINE: Please contact your local service provider
    STATUS: completely installed
    FILES: 256 installed pathnames
    6 shared pathnames
    14 directories
    6 executables
    12644 blocks used (approx)
    Bad prtdiag output
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    Prtdiag failed!
    System Configuration: Sun Microsystems sun4u Netra 440
    System clock frequency: 183 MHZ
    Memory size: 8GB
    ==================================== CPUs ====================================
    E$ CPU CPU Temperature Fan
    CPU Freq Size Impl. Mask Die Ambient Speed Unit
    0 1281 MHz 1MB US-IIIi 2.4 - -
    1 1281 MHz 1MB US-IIIi 2.4 - -
    2 1281 MHz 1MB US-IIIi 2.4 - -
    3 1281 MHz 1MB US-IIIi 2.4 - -
    ================================= IO Devices =================================
    Bus Freq
    Brd Type MHz Slot Name Model
    0 pci 66 0 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 1 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci108e,abba (network) SUNW,pci-ce
    0 pci 66 2 pci100b,35 (network) SUNW,pci-qge
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 2 scsi-pci1000,30 (scsi-2) LSI,1030
    0 pci 66 3 pci100b,35 (network) SUNW,pci-qge
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/su (serial)
    0 pci 33 7 isa/rmc-comm-rmc_comm (seria+
    0 pci 33 13 pci10b9,5229 (ide)
    ============================ Memory Configuration ============================
    Segment Table:
    Base Address Size Interleave Factor Contains
    0x0 2GB 4 BankIDs 0,1,2,3
    0x1000000000 2GB 4 BankIDs 16,17,18,19
    0x2000000000 2GB 4 BankIDs 32,33,34,35
    0x3000000000 2GB 4 BankIDs 48,49,50,51
    Bank Table:
    Physical Location
    ID ControllerID GroupID Size Interleave Way
    0 0 0 512MB 0,1,2,3
    1 0 1 512MB
    2 0 1 512MB
    3 0 0 512MB
    16 1 0 512MB 0,1,2,3
    17 1 1 512MB
    18 1 1 512MB
    19 1 0 512MB
    32 2 0 512MB 0,1,2,3
    33 2 1 512MB
    34 2 1 512MB
    35 2 0 512MB
    48 3 0 512MB 0,1,2,3
    49 3 1 512MB
    50 3 1 512MB
    51 3 0 512MB
    Memory Module Groups:
    ControllerID GroupID Labels
    0 0 -,-
    0 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    1 0 -,-
    1 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    2 0 -,-
    2 1 -,-
    Memory Module Groups:
    ControllerID GroupID Labels
    3 0 -,-
    3 1 -,-
    Truss output after starting picld
    #( /etc/init.d/picld start ; while : ; do
    truss -U /usr/lib/picl/picld -U :: -p `pgrep picld`
    pstack `pgrep picld`
    echo '###################################'
    done )>/tmp/truss.out 2>&1# Output too large to attach..
    # ps -aef | grep -i picld
    root 8171 18519 0 16:45:07 pts/6 0:00 grep -i picld
    root 27299 1 0 15:59:18 ? 0:01 /usr/lib/picl/picld
    root 8167 27296 0 16:45:06 pts/1 0:00 truss -U /usr/lib/picl/picld -U :: -p 27299
    # prtpicl
    prtpicl: picl_initialize failed: Daemon not responding
    # /usr/platform/`uname -i`/sbin/prtdiag -v | more
    picl_initialize failed: Daemon not responding
    # pgrep picld
    27299
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.CRITICAL
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 394902 daemon.error] SUNW_piclenvmon: invalid LED color 0x5 returned for ALARM.MAJOR
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 876042 daemon.error] /usr/platform/SUNW,Sun-Fire-V440/lib/picl/plugins/piclfrutree.conf::[line 160]: Row has no entries
    Aug 4 16:47:04 XXXXXXX picld[27299]: [ID 601818 daemon.error] SUNW_piclfrutree PICL plugin module failed

  • SUNWi1cs, SUNWi15cs are missing in oracle solaris for VM

    Hello,
    i'm installing oracle 10r2 on Solaris10_8-11 for testing purposes. i have download Solaris from VM section of oracle
    http://www.oracle.com/technetwork/server-storage/solaris10/solaris-vm-405695.html.
    Two package are missing both are required for oracle installation. i got following error
    ERROR: information for "SUNWi1cs" was not found
    ERROR: information for "SUNWi15cs" was not found
    when i google this issue i got a OTN thread which deal almost same problem and purposed solution was to download cd1 which contain both pkgs. Now my questions are
    would i need to download compete dvd for just two pkgs? (SIZE 3GB)
    is there any link to download CD1 only
    or any other work around?

    thanks for reply,
    i'm confuse why oracle did not add theses pkg in vm solution. The purpose of this VM machine to make life easy for those guys who don't have sound experience on solaris box (like me) or they have no concern with OS installations. it mean, if i wanted to install oracle on solaris using VM machine then i have to download both file separately which is equal to 7GB (too large) plz let me know if there is any way to downlaod cd1 instead of full dvd?
    here is my complete snapshot of the output
    bash-3.2# pkginfo -i SUNWlibms SUNWtoo SUNWi1cs SUNWi15cs SUNWxwfnt SUNWxwplt SUNWmfrun SUNWxwplr SUNWxwdv SUNWgcc SUNWbtool SUNWi1of SUNWhea SUNWlibm SUNWsprot SUNWuiu8
    system      SUNWbtool CCS tools bundled with SunOS
    system      SUNWgcc   gcc - The GNU C compiler
    system      SUNWhea   SunOS Header Files
    system      SUNWi1of  ISO-8859-1 (Latin-1) Optional Fonts
    system      SUNWlibm  Math & Microtasking Library Headers & Lint Files (Usr)
    system      SUNWlibms Math & Microtasking Libraries (Usr)
    system      SUNWmfrun Motif RunTime Kit
    system      SUNWsprot Solaris Bundled tools
    system      SUNWtoo   Programming Tools
    system      SUNWuiu8  Iconv modules for UTF-8 Locale
    system      SUNWxwdv  X Windows System Window Drivers
    system      SUNWxwfnt X Window System platform required fonts
    system      SUNWxwplr X Window System platform software configuration
    system      SUNWxwplt X Window System platform software
    ERROR: information for "SUNWi1cs" was not found
    ERROR: information for "SUNWi15cs" was not found

  • Can someone please.. tell me Quickly

    I want to create Flash Banner or something.
    Can someone please Quickly tell me the basics, just tell me
    where should i go.
    Like suppose i put TEXT
    "HELLO EVERYONE"
    then it should change to
    "WE WELCOME YOU HERE"
    etc..etc.. and then comes back to "HELLO EVERYONE" and
    repeats.
    How to do it, please, tell me Quickly, few tips, and where
    should i go
    I am a little Quick learner,
    Appericiate.

    there's also F1 (help docs) for basics like this.
    --> **Adobe Certified Expert**
    --> www.mudbubble.com
    --> www.keyframer.com
    seand03 wrote:
    > I hope this is helpful but Dart Motif (
    http://www.dartmotif.com/) is
    a good
    > product if you are tracking click throughs and building
    banners for companies.
    > The Dart Motif ad kit is great for building expanding
    banners and such. You can
    > find there ad kit at:
    http://www.dartmotif.com/downloads/downloads.asp
    > Also try:
    >
    http://www.adobe.com/devnet/flash/articles/intro_flash.html
    - this article is
    > probably what you want.
    >
    http://www.adobe.com/resources/richmedia/tracking/designers_guide/`
    >

  • Internal Zone Configuration

    After installing a zone for the first time on a baseline system, I run the 'zlogin -C my-zone' command. I get the typical '[Connected to zone 'my-zone' console]' response, but when I boot the zone using the 'zoneadm -z my-zone boot' command, I do not get the system config questions such as Language, Hostname, Nameservers, etc. I am able to login as root without a password. I tried configuring and installing the same exact zone on a full system install, and I do get the questions on first boot.
    What packages are needed to have the questions appear on first boot? The baseline system I'm having problems with is a default CORE install with the following additions:
    Core software for resource pools
    CPU Performance Counter driver and utilities
    Freeware Compression Utilities
    GNU Bourne-Again shell (bash)
    Install Software
    Interprocess Communications
    Network Security Services
    Network Security Services(64 bit)............................
    Network Time Protocol
    On-Line Manual Pages
    Perl 5
    Secure Shell
    Solaris Zones
    tcpd - access control facility for internet services
    J2sdk 32 and 64 bit runtime
    Live Upgrade Software
    The XML library
    X Window System Runtime Environment
    X11 Arabic required fonts
    X11 ISO-8859-x optional fonts
    X11 ISO-8859-x required fonts
    CDE application basic runtime environment
    Motif RunTime Kit
    thanks,
    brian

    I was missing only one of the sysidtool programs, sysidpm. I installed SUNWpmu, which includes sysidpm, and I still had the problem.
    JASS 4.0.1 is in the global zone and was run before creating the zone. JASS was installed into the zone (by default), but not run. When I ran the undo on the JASS scripts in the global zone, the problem went away. Here are the basics of the hardening driver that was used:
    JASS_FILES="
    # /etc/dt/config/Xaccess
    /etc/inet/inetd.conf
    /etc/init.d/inetsvc
    /etc/init.d/nddconfig
    /etc/init.d/set-tmp-permissions
    /etc/issue
    /etc/motd
    # /etc/notrouter
    /etc/rc2.d/S00set-tmp-permissions
    /etc/rc2.d/S07set-tmp-permissions
    /etc/rc2.d/S70nddconfig
    /etc/syslog.conf
    /etc/ipf/ipf.conf
    /etc/ipf/pfil.ap
    JASS_SCRIPTS="
    disable-IIim.fin
    disable-ab2.fin
    disable-apache.fin
    disable-asppp.fin
    disable-autoinst.fin
    disable-automount.fin
    disable-dhcpd.fin
    disable-directory.fin
    disable-dmi.fin
    disable-dtlogin.fin
    disable-inetd.fin
    disable-ipv6.fin
    disable-kdc.fin
    # disable-keyboard-abort.fin
    disable-keyserv-uid-nobody.fin
    disable-ldap-client.fin
    disable-lp.fin
    disable-mipagent.fin
    disable-nfs-client.fin
    disable-nfs-server.fin
    disable-nscd.fin
    disable-nscd-caching.fin
    # disable-picld.fin
    disable-ppp.fin
    disable-preserve.fin
    disable-power-mgmt.fin
    # disable-remote-root-login.fin
    disable-rhosts.fin
    disable-rpc.fin
    disable-samba.fin
    disable-sendmail.fin
    # disable-ssh-root-login.fin
    disable-slp.fin
    disable-snmp.fin
    disable-spc.fin
    disable-syslogd-listen.fin
    disable-system-accounts.fin
    disable-uucp.fin
    disable-vold.fin
    disable-xserver-listen.fin
    disable-wbem.fin
    enable-coreadm.fin
    # enable-ftpaccess.fin
    # enable-ftp-syslog.fin
    # enable-inetd-syslog.fin
    # enable-priv-nfs-ports.fin
    # enable-process-accounting.fin
    enable-rfc1948.fin
    enable-stack-protection.fin
    enable-tcpwrappers.fin
    install-at-allow.fin
    install-ftpusers.fin
    install-loginlog.fin
    install-newaliases.fin
    install-sadmind-options.fin
    # install-security-mode.fin
    # install-shells.fin
    install-sulog.fin
    remove-unneeded-accounts.fin
    set-banner-dtlogin.fin
    set-banner-ftpd.fin
    set-banner-sendmail.fin
    set-banner-sshd.fin
    set-banner-telnetd.fin
    set-ftpd-umask.fin
    set-login-retries.fin
    set-power-restrictions.fin
    set-root-group.fin
    set-rmmount-nosuid.fin
    set-sys-suspend-restrictions.fin
    set-system-umask.fin
    set-tmpfs-limit.fin
    set-user-password-reqs.fin
    set-user-umask.fin
    update-at-deny.fin
    update-cron-allow.fin
    update-cron-deny.fin
    update-cron-log-size.fin
    update-inetd-conf.fin
    # enable-bsm.fin
    install-md5.fin
    install-fix-modes.fin
    # install-strong-permissions.fin

  • Do you use Dart Motiff for your flash ads?

    I'm looking to make some swf ads for my website. Specifically
    some .swf that has a transparent background, hovers over my
    existing text and then closes by itself or gives the user the
    option of closing the ad before it finishes playing.
    I've searched and searched and have been unable to find any
    instructions that are basic for me to understand. However, I did
    find
    http://www.dartmotif.com/ that
    offers a "Motif Ad Kit" for flash. I tried it out and it is
    excellent and exactly what I'm looking for.
    However, how do I get it to work on my site? It saves the
    completed file in a *.mtf format which obviously won't work on a
    site. I tried saving the completed work as a .swf and putting it
    into my site like that (both as a new layer and as normal) and that
    is not working.
    My question... Is there a way of using this Ad Kit for my own
    site or do I have to have an account with Motif. The way it appears
    is I have to have an account with Motif, save my *.mtf file and
    download to them and then they give me the tag for my site.
    If someone knows let me know. (Yes I left an email with
    motif, however it is the weekend and I'm hoping to find out today).
    Thanks.
    By the way I suggest going to their site
    http://www.dartmotif.com/ -
    they have some excellent flash presentations if your looking for
    ideas.
    Jared

    > I'm looking to make some swf ads for my website.
    Specifically some .swf that
    > has a transparent background, hovers over my existing
    text and then closes by
    > itself or gives the user the option of closing the ad
    before it finishes
    > playing.
    > I've searched and searched and have been unable to find
    any instructions that
    > are basic for me to understand. However, I did find
    http://www.dartmotif.com/
    > that offers a "Motif Ad Kit" for flash. I tried it out
    and it is excellent and
    > exactly what I'm looking for.
    >
    > However, how do I get it to work on my site? It saves
    the completed file in a
    > *.mtf format which obviously won't work on a site. I
    tried saving the
    > completed work as a .swf and putting it into my site
    like that (both as a new
    > layer and as normal) and that is not working.
    Trust me Jared, these things are extremely simple. I mean
    damn, way extremely.
    You don't need 3rd party tools for it. Not to mention that
    their ideas are not
    fresh. Peal corner personally did and use commercially more
    than 5 years ago.
    > My question... Is there a way of using this Ad Kit for
    my own site or do I
    > have to have an account with Motif. The way it appears
    is I have to have an
    > account with Motif, save my *.mtf file and download to
    them and then they give
    > me the tag for my site.
    Forget that junk. Tell us which one you have in mind and we
    can help you get it
    done. Before that tho, please clarify roughly what is your
    flash skill like.
    Don't want to overwhelm with jargon if you very new nor waste
    your time explain
    basics while you got them covered.
    > By the way I suggest going to their site
    http://www.dartmotif.com/ -
    they have
    > some excellent flash presentations if your looking for
    ideas.
    I suggest going to www.thefwa.com , they have some web best
    flash sites ever,
    dayli featured. This is a place if you want some cool ideas
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Extension for Motif Flash Ad Kit will not install

    I followed the directions given on this page:
    http://www.adobe.com/devnet/rich_media_ads/articles/flash_ad_kit03.html
    I downloaded the extension from Doubleclick. I installed the
    extension successfully. The templates are not available in the
    Flash UI. What did I do wrong? See this screenshot -
    http://plutonomy.org/no_motif_install.jpg
    - It shows the Flash UI, my Configuration folder with the Motif
    components installed, the Extension Manager with Flash Ad Kit
    installed. But no way to use the templates... Very confused.

    I'd like to add that there are several errors with this
    Double-click extension. It would not install on a Windows XP
    machine with CS3, stating "This extension requires Macromedia Flash
    MX or greater. Quitting." Oh, CS3 isn't greater??
    Also, I found the Window > Other Panels on my Mac version
    (where the extension did install but doesn't show up on the welcome
    screen) and when I try to open the Motif Panel, I get several
    Javascript errors and the panel opens up with blank content.
    I will be sending a note to the author of the tutorial. Users
    trying to develop Flash ads with the Flash Ad Kit be warned - it
    doesn't work!!

  • Help with connecting iPad 2 to Motif xs keyboard using GarageBand.?

    I have an iPad 2. I recently bought the iPad camera connection kit from amazon because I heard you can connect your iPad to a music keyboard with GarageBand. I have a Yamaha motif xs 8. When I connect my keyboard with a midi USB to the iPad.. Nothing happens. Can anybody help with this, and am I missing something in order to make this work???

    It worked for me no problem but I'm using an ES Rack and the dude on the video I think was using an ES. It maybe the XS is wired differently. Your best option is still getting a piece like IK Multimedia's iRig Midi. It connects from the iPad dock to actual midi cables and is way more flexible if your using multiple devices.

  • How do i add type kit fonts to muse web site

    how do I +add type kit fonts to muse website

    Hi.
    Check this video, might be helpful
    Let me know if you have any questions

  • Error while installing Migration Tool kit for SAP BPC7.0

    Hi all,
    We are implementing SAP Business Planning and Consolidation Migration Process to BPC 7.0.
    We are trying to installin Migration Tool Kit. In this kit we are having two set up files - one for BPCMigrationClient and another for BPCMigrationServer.
    When i am trying to install the BPCMigrationServer set up file it diaplays a screen which says - Enter the service type accounts.- it has the following items - 1. System Admin ID, 2. password, 3. Admin ID, 4. Admin Password, 5. User ID, 6. User Password.
    1. System Admin ID already has the id ( through which i have logged on to the system). This option is non editable.
    2. password: gives option to type in the password.
    3, 4, 5, 6 options are disabled and are blank. we are not able to edit them or write anything in them.
    After entering the password when clicked on next , it gives us message saying Invalid Admin ID (3). But the problem here is that the 3,4,5 and 6 options are disabled. We cannot write anything in them. We are not able to install the migration tool kit because of this.
    Can anyone help us out in solving this issue.
    Thanks,
    Madhav

    CAn you precise also what Migration tool are you using?
    Migration from 5.1 to SAP BPC 7.0 NW?
    In that case when you are speaking about the installation about what part are you speaking?
    I think actually you are speaking about the migration tool from 4.2 to 7.0 Microsoft version .
    In that case you can install the mIgration tool just with SAP BPC sys admin users and you have to input the password for that user. Sys admin user for BPC is usually the user used for installation of SAP BPC server.
    Any way I suggest to follow the Migration tool training document and there you will find all the information necessary.
    Regards
    Sorin Radulescu

  • Hp Wireless kit problem with HP CP1215 printer - will not finish setup

    I just purchased the HP Color Laserjet CP1215 and attempted to install and use the upgrade wireless kit but I can't get it to install.  It will go through the process until it gets to the point where it either can not find the PC adapter or that the PC and printer adapter don't connect.  I am not sure what to do.  The only error message I receive is that the HPWlan.exe file has an error and will not load.  Does anyone have any suggestions?  I have a Toshiba laptop and am running Windows XP with service pack 2.  I have a DSL wireless connection through a linksys router.  Any suggestions about this issue would be really helpful.  Thanks.

    Assuming that one of the APs runs DHCP and that the other is bridged, turn the briged AP off.  Now, connect the printer to the other AP, even if you have to move the printer.
    Once the printer is connected it should work fine once you turn the second AP back on.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Step by step installation for java card kit 2.2.2

    can anyone help me with a complete step by step installation information for java card kit 2.2.2, i already tried to follow the instruction given in the software i download n still stuck in setting the java path. any recommendation
    thanks for the help

    The javacard API is for developing applets on card. Java 6 is for developing clients off-card.
    yes u can use any java IDEs like netbeans or jcreator. But you will have to select the libraries within the downloaded java card kit folder for ur IDE in order to compile successfully.
    try reading up the documentation and run the samples in the java card kit. thats a good place to start.

  • System Recovery Kit for dv7-3165dx fails to restore factory image to replacement hd

    I'm posting this wall of text here in case someone else has any suggestions before I contact HP Support to see what options they have.
    My attempt to recover the factory image to a replacement hard drive in an HP Pavilion dv7-3165dx notebook is failing. An error occurs when SM.exe is trying to merge the WIM files. The SSRD.Log shows an error:
    SM, 13, Set reference file fail
    after that, SM.exe displays this message when run from a command line:
    SM, Failure, Can not load imagex 1 from src WIM file
    The following are the symptoms that the Recovery Manager displays on the screen.
    The Recovery Manager reads the two DVDs and after a few seconds, it pops up an error message:
    Reducer
    C:\RM\Image\TempBASE.WIM was not found.
    The message has on "OK" button that when clicked on, closes the message window.
    After that, nothing happens. No disk or DVD activity for over an hour. The mouse moves, but no key presses have any effect, including CTRL-ALT-DEL. You can use the mouse to move the Recovery Manager window around, and there is nothing hidden behind it. Clicking on the Recovery Manager Back, Next, or Cancel buttons produce no response at all.
    The only option at this point is to hold down the power switch until it powers down.
    When the power is turned back on, the hard drive boots and Recovery Manager displays a message that incorrectly claims "Recovery is complete" and has a "Click Finish to restart" button. After clicking on "Finish", it reboots but since the System Recovery did not actually complete, all it does is display:
    BOOTMGR is missing
    Press CTRL+ALT+DEL to restart
    Before attempting the recovery, the notebook passed all diagnostic tests.
    The 2x2GB memory cards, which still have HP stickers on them, were tested with Memtest86+ V5.01 and completed over six passes in over seven hours with zero errors.
    The replacement 500GB HGST Travelstar Z5K500 drive was tested with gsmartcontrol. The SMART status showed no errors in the past with over 400 hours of power-on time. Both of the SMART short self-test and extended self-test tests were run, which it passed without any errors.
    The HP System Diagnostics from the Startup Menu were run on the memory and hard drive and they passed those tests without any errors.
    While waiting for the HP "System Recovery Kit for Consumer Notebook (3 Disks)" Software Part Number 599357-001 to arrive, both Fedora 21 64bit and Windows Vista 64bit were successfully installed on the harddrive.
    Both System Recovery DVDs were read on different machines without any errors. This System Recovery Kit supports the notebook's System Id which is 3638, so they appear to be the correct discs.
    Now a list of workaround attempts that were suggested.
    After the Recovery Manager failed a few times with the same error message, some googling came up with other users mentioning the "TempBASE.WIM was not found" error message. I tried these suggestions that I read about.
    Run KillDisk to fill the HD with zeros.
    Running Recovery Manager after that failed with the same error message.
    Run the CyberLink Recovery Discs Utility (sp44645.exe).
    Running Recovery Manager after that failed with the same error message.
    Installed Windows VISTA 64bit again and upgraded the BIOS from F10 to F13.
    Running Recovery Manager after that failed with the same error message.
    Try only using a single 2GB memory card to see if it was a 64bit problem.
    Running Recovery Manager after that failed with the same error message.
    The BIOS does not have an option to change from AHCI mode to IDE mode.
    I don't have a Windows 7 OEM install disc and am trying to avoid spending $100 to buy one.
    That is when I decided that it is not a PC hardware problem, but a problem with the HP System Recovery Kit. Here are the details of what I think the Kit is doing.
    After running Recovery Manager and getting the error message, instead of just re-booting and letting the "Recovery is complete" message appear, I re-booted with a Linux USB drive and inspected what was on the hard drive.
    fdisk -l shows this:
    Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: dos
    Disk identifier: 0xa5dddc41
    Device Boot Start End Sectors Size Id Type
    /dev/sda1 409600 143013887 142604288 68G 7 HPFS/NTFS/exFAT
    /dev/sda2 * 143013888 143833087 819200 400M c W95 FAT32 (LBA)
    fsarchiver probe shows this:
    [======DISK=] [=============NAME====] [====SIZE==] [MAJ] [MIN]
    [sda                     ] [HGST HTS545050A7                ]  [  465.76 GB] [     8] [     0]
    [=====DEVICE] [==FILESYS==] [=====LABEL=] [====SIZE==] [MAJ] [MIN]
    [sda1                 ] [ntfs                  ] [<unknown>      ] [     68.00 GB] [    8] [     1]
    [sda2                 ] [vfat                  ] [SDV                     ] [  400.00 MB] [   8] [     2]
    Running gparted shows about 200 MB of unallocated space before the sda1 NTFS partition. The rest of the disk is unallocated after the bootable sda2.
    The sda1 NTFS partition has a \SSRD.Log file and an empty \RM\Image directory.
    The sda2 FAT32 partition has the Recovery Manager application files in it:
    /mnt/sda2:
    total 400
    -rwxr-xr-x 1 root root 15 Apr 9 23:36 SDV.FLG
    drwxr-xr-x 4 root root 4096 Apr 9 23:36 SYSTEM.SAV
    drwxr-xr-x 3 root root 4096 Nov 1 2009 BOOT
    drwxr-xr-x 3 root root 4096 Nov 1 2009 EFI
    drwxr-xr-x 2 root root 4096 Nov 1 2009 SOURCES
    drwxr-xr-x 3 root root 4096 Jul 27 2009 TOOL
    -rwxr-xr-x 1 root root 383562 Jul 13 2009 bootmgr
    The SOURCES directory has boot.wim, and the TOOL directory has all the programs, like Reducer.exe and SM.exe, in it.
    After shutting down the Linux system and rebooting, the Recovery Manager then boots from sda2 and displays the "Recovery is complete" message and "Click Finish to restart" button. During this process, it removes the sda2 partition and marks the sda1 NTFS partition as the active bootable partition. When the PC restarts, all that is left is the sda1 NTFS partition with the empty C:\RM\Image directory and the SSRD.Log file, so there is no BOOTMGR to boot with.
    The SSRD.Log file logs the tasks that the Recovery Manager performs.
    The Recovery Manager runs some initialization tasks and then reads the two System Recovery DVDs. It then calls MergeWimFile which runs SM.exe and starts to merge BASE.WIM with the other BASE*.WIM files. SM.exe merges 20 WIM files with log entries like these:
    SM, Success, refName= C:\RM\IMAGE\BASE22.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE23.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE3.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE4.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE5.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE6.WIM
    SM, Success, refName= C:\RM\IMAGE\BASE7.WIM
    Then, with only two WIM files left, BASE8.WIM and BASE9.WIM, the log shows:
    SM, 13, Set reference file fail
    This must be when Recovery Manager pops up the "Reducer C:\RM\Image\TempBASE.WIM was not found" error message.
    That narrowed down the problem.
    I copied all of the WIM files and the TOOLS directory to a Windows 8.1 system. The two DVDs did not have any errors while being read. Running SM.exe from an admin Command Prompt with the same parameters that were logged in the SSRD.Log produced the same error message. There was an additional error message that appeared in the Command Prompt window:
    SM, 13, Set reference file fail
    SM, Failure, Can not load imagex 1 from src WIM file
    and the TempBASE.WIM was not created.
    SM.exe /? did not provide a help message. I could not find any documentation on the SM.exe command.
    If I removed three of the WIM files, (BASE7.WIM BASE8.WIM BASE9.WIM) then SM.exe could create the TempBASE.WIM file, but it would fail while merging index 2 of 3 with this message:
    SM, 11%, Merge index 2 of 3 Processing
    SM, Failed, Export image failed
    The TempBASE.WIM is 3,421,518 KB in size after that.
    This is where I came to a dead end and cannot think of anything else that I can do. Maybe I'm missing something obvious, but it appears to me that there was some kind of error building this System Recovery Kit and it is not able to perform a factory install on this notebook.
    ps
    If I can figure out how to add an attachment, I will add the SSRD.Log file.  If not, then ask and I will post it as a followup.

    Downloaded Windows Assessment and Deployment Kit which contains the latest imagex program.
    Running imagex.exe on the BASE7.WIM file on the second System Recovery DVD:
    imagex.exe /info K:\PRELOAD\BASE7.WIM
    ImageX Tool for Windows
    Version: 6.2.9200.16384
    Error opening file [K:\PRELOAD\BASE7.WIM].
    The data is invalid.
    The same error message is shown for BASE7.WIM, BASE8.WIM, and BASE9.WIM.
    The other WIM files in the PRELOAD directory, BASE5.WIM, BASE6.WIM, BASE10.WIM, BASE13.WIM, BASE15.WIM, BASE17.WIM and BASE23.WIM, could be read by imagex without any errors.

Maybe you are looking for

  • MS word opened with pages Black marks

    When I open a Microsoft word document in pages I get a black square with a circle in it at the end of some lines. How can I remove them ?(Delete doesn't work. The cursor dosen't recognize that they are there, but the printer does.) Is there a prefere

  • Can't get phone call out with volume.

    trying to make a phone call and can't hear the ring tone or the person on the other end unless I put them on speaker phone. Any suggestions?

  • TAX Creation

    Hi Experts....    Please solve my problem... I am using Service Tax plus VAT Tax... Service Tax is 10.3%    I need to apply eCess 2% on service 10.3        and                       HeCess 1% on Service 10.3 this Output have to apply on VAT 4% * Gros

  • How to make each catergory has its own RenderListItem ?

    Hello:    Everyone!    I am using XML Form Builder to creat a Blog,I creat three category which is called most recent blog, topic,bloggers.    I preview the result iview,after I click every category,the RenderListItem is the same.However I need the R

  • Working with ActionListener

    i am working with a complex structured application where i have to invoke the ActionListener.processAction() before the PROCESS_VALIDATIONS phase. i have a set of code which is public class MyActionListener implements ActionListener{ public PhaseId g