Motif ES and Logic

Hi. I have a question concerning my motif es and logic. I have everything working midi wise and I have created 16 audio objects for the 16 channels from my Motif. My question is, now that I'm using the audio objects, there is no way to enter program change information. How do I do this using audio objects?
Also I was wondering if theres a way to scroll through the sounds on my keyboard without having to revert to the dropdown menus in logic. I was able to set up a fader that would control the instruments 1-127 on a single Bank, but I could not seem to be able to get a fader to change the Bank on the keyboard.
some help would be much appreciated. Thanks

Have you downloaded the Motifator LSO files?
http://www.motifator.com/mart/mainframe_files.htm
This will create a Motif ES "MultiInstrument" with patch names and bank selects available. Then you use an AudioInstrument track with "External" as the plugin.
There's some good tutorials on MLan Motif stuff at Motifator.com - it was a lifesaver for me.

Similar Messages

How can I use the sounds of the Yamaha Motif XF6 in Logic Pro 9?

I have Logic Pro 9 on my Mac Book. I also have a Yamaha Motif XF 6 synthesizer. Instead of using Logic's software instruments I would like to record the sounds of the Motif directly into Logic.
I have been told that an audio interface is necessary for this. What kind of audio interface would be good for this? Any in particular?
And, once I have obtained the interface, what steps do I need to take to hook up the Motif into Logic to utilize the Motif's sound bank?
Detailed steps would help, as this is new stuff for me.
Thanks!

Since this is a user forum only, and your questions will take a lot of time to answer you might want to check both the Logic manual and the XF6 manual. The XF6 has possibilities such that you may not need and Audio interface if the Firewire option is present.
Also you have a built in USB MIDI interface as well, you will need to download the Yamaha MIDI driver.
Read Exploring Logic Pro, especially chapter five, you can record your performance via MIDI, edit it and then commit to audio.
Dig in.

Motif XS88 and Duet

I have the latest Yamaha USB drivers installed. Problem is when recording audio tracks from the Motif there is noise, unless I unplug the USB cable from the Motif. Software instruments are noiseless. It's almost like the midi USB and the audio in from the Motif are causing a loop or something. Any suggestions on changing configurations in Logic or Motif greatly appreciated. Don't use the Motif for midi recording so I don't need it set up as an external midi instrument or as a Logic controllor. Basically only record direct audio tracks from this board. Many thanks

Thanks Eric. Ya, thats what I have been doing, just unplugging the USB. Peculiar how the Audio tracks through a geetar or mic are very quiet. Only when I record Motif in an audio track with the USB plugged in do I get this noise. I initially set up the Motif to control Logic, and it was a lot of adjusting. I'm fine just using the Motif occasionally for some audio tracks. So, I dont think its a ground problem more perhaps something I did when initially setting up Logic and Motif to communicate with each other.

Contemplating switch to Intel iMac and Logic

Hi there,
Obvious first post.
I am currently using ableton LIVE5 and a host of stuff on a pretty decent 3.2GHz P4 laptop, but find it perhaps possible to add a 2.0GHz 20"iMac and Logic pro 7 to my arsenal.
But I wanted to address a few things prior to the plunge. How is that for spontaneity?
1) Do I have to get apple support for Logic Pro 7 for all that extra money? I don't foresee needing software support for it.
2) Will I run into trouble if I am just using core audio for the time being? I have an Echo Indigo DJ that I use for the laptop, but I don't have, nor will I have enough cash for a better external audio solution right now. (am looking into the motu ultralite or traveller eventually.)
3) How well, and easily, will I be able to use my motif as audio input (if I really need it with all the great things I am hearing about the included plugs in Logic; I heard some of the demos on the apples website, and I must say "nice".)
Thanks for your help in advance,
Cheers,
AB

1) no you won't need extra support apart from the warranty on your hardware. you'll get plenty of wupport here. this forum really is quite incredible.
2) apart from digidesign coreaudio is simply what you use to run audio interfaces. you could even use your echo as a standalone AD/DA if you are worried about its drivers (thou i am sure they are fine) and use logics optical outputs and inputs and the built-in audio driver. i am sure your interface will be fine though.
3) sorry - don't know what "motif" is.
logic is pretty amazing. after you have gotten over the intially somewhat steep learning curve (thoug not as bad as some people say) you won't look back. no one ever does.

Logical Switch and Logical Network

Hello All...................I have Hyper-V Failover Cluster based on 5 Hosts and I am managing it with VMM 2012 R2. I was slightly confused with respect to Logical Network and Logical Switch in the Fabric Settings. I would appreciate if someone could
shed a little light on the difference between them. Also, while there is a Logical Network defined by default (Name of the Virtual Switch of Hosts), there is nothing defined in the Logical Switch. Which one is mandatory? Logical Network or Logical
Switch? Can I delete the default Logical Network?

Hi Nick,
Please find below link for the whitepaper mentioned by Kristian.
https://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
For a complete reference please refer below series. This covers VMM 2012 SP1 but should be fine with R2 as well.
http://blogs.technet.com/b/scvmm/archive/2013/01/08/virtual-networking-in-vmm-2012-sp1.aspx
Logical Network is defined for easier management and used in Network Virtualization where as Logical switch is used to configure networking in multiple Hosts rather than creating individual Virtual switches in each host. If it were me I'll leave the
default logical network as there is no harm of doing nothing in it.
I hope this will shed some light into your situation.
Thanks,
Janaka
Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

Problems with Presonus Firestudio and Logic

I am having problems with compatability with my brand new Presonus Firestudio recording interface and Logic pro 8. I am new to logic but not to home recording, and i cant understand what might be the problem. When i use the firestudio with garageband it works easily. In the garageband sound preferences there are input AND output channels that the user can define. (i.e. you can set your input channels to come from the firestudio while the output channels go to the computer speakers or headphone jacks or whatever you define it as).
From what i have seen in logic, there is only one option for your audio settings. when in preferences and under audio, there is a "device" setting in which you can define your audio device. Wheather this is input AND output for the program, i do not know. but the problem i am experiencing is that whenever i choose the firepod as the input device, no sound from logic will play from the speakers whatsoever. My first thought was that maybe ouput was going straight to the firestudio, but after plugging headphones into it this also did not work. Has anyone had success getting their firestudio to work in logic? if so let me know what settings you had to use, and how you got to moniter your input from from the firestudio via your computer.
p.s.
another WIERD problem i have run into, is that if i shut off the firestudio while logic is open, alot of times it will shut down my whole computer. i have never heard of this happening. what am i doing wrong?
thanks!

SydSeale wrote:
The new beta drivers are now here...
http://www.presonus.com/forums/showthread.php?t=3957
ah, I was hoping to find my solution here, but alas the thread is gone...
I recently bought a Macbook running Leopard, and am having difficulties with my PreSonus Firestudio Project thru Logic and Mainstage. I can get audio input and output just fine, but there's a ton of distortion/crackle. Kickstarting the sample rate seems to clear it up for a minute or two, but then the crackle comes back. The recorded tracks sound clean if I unplug the Firestudio, so apparently it's only in the monitoring stage?
On the PreSonus board, they're claiming it's Apple who needs to update drivers for Leopard; PreSonus says the "Firestudio Project is Leopard compatible."
still searching for some answers...

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Best Interface for GarageBand and Logic?

I have been using GB and Logic Pro extensively for the past 2 years. I would now like to know what the best interface would be to use in order to use 8 mics at one time. Thanks for your help.

Only around six grand....but if you want da best...this is certainly in that stratosphere...

Hard drive crashed on my MacBook pro and had to replace drive and logic board. When I connect my iPhone and try to sync I get a dialog box stating iPhone is synced with another iTunes library, erase and sync? How do I sync with iTunes without erasing?

Hard drive crashed and had to replace drive and logic board on my MacBook pro. After Install tried to sync with my iPhone and a dialog box pops up stating "this iPhone synced with another iTunes library, erase and sync?". I checked the manually manage music and videos box because I don't want all my wife's pics and music on my iPhone. How do I Sync without erasing what I have on my iPhone???

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

My computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings and even went to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple

my computer has been seen at Genius bar 6 times for freezing up, reloaded all original settings, all of their diagnostics, and they even sent it to the apple shop where they replaced the battery and logic board. Still freezes after I try to reload iTunes stuff and app stuff from apple, especially iPhoto which is seems to refuse to load and then begins freezing up all over again. Anyone else have this problem. Other than this, I have had absolutely no problems with this computer. Now, it's a file of junk.

Hi Ronald ...
Have you checked lately to see how much free space there is on the disk? Especially since iPhoto freezes at launch ...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
And make sure the OS X software is up to date.
Click the Apple  top left in your screen.
From the drop down menu click: Software Update
If you have anti virus software installed or are using third party Mac cleaning utiliites, that may be part and parcel of the your problems.

What are the physical topology and logical topology in sharepoint

Hi
what are the physical topology and logical topology in sharepoint
how to define the physical topology and logical topology in
sharepoint
adil

Here are the example topologies for SharePoint:
Traditional -
http://www.microsoft.com/en-us/download/details.aspx?id=30377
Streamlined -
http://www.microsoft.com/en-us/download/details.aspx?id=37000
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

RFC and Logical System names

Hello......is it necessary to have RFC and Logical system name for the connected system to be identical?Is there any explanation behind this if thats true....

Hi Gaurav,
It is recommended, but not mandatory, right, Muthuraman?
The system uses some transactions to determine which RFC will be used for the communication between one system and another, for example, in transaction 'Define backend systems' in SPRO, you can define that the current SRM client has an ECC backend system named X and the RFC destination for this X system is Y (not necessarily the same name).
Regards,

RFC Destination and Logical System

Hi Friends,
Can anybody tell me how the RFC Destination and Logical System are related to each other?

Hi,
In any ALE scenario u need one sender and one receiver system.
Logical systems are just logical representation of these systems but in case of RFC destination u specify technical parameters for those systems like IP address and username and password to connect to that system.
Thus when u create port i.e.we21 u specify actual RFC destination for the system to which u want to connect and when u create partner profile for that logical system u specify this port so when u want to send data to this logical system i.e receiver system port will be used which in turn has RFC destination which will be used to connect to that system.
In simple terms logical systems are logical representation of any system and RFC destinations are physical/techinical systems.
Thanks.

Diffebetween Business system and Logical system...

what is the difference between Business system and Logical system...

Hi
Business system is a logical layer needed for configuration in integration directory. On the other site technical system is physical representation of your technical landscape. In case of SAP technical systems you can have more than one business system relation. In that situation there is relation one client to one business system.
If your technical system changes, then you definitely need to point this new technical system to the existing Business system which has been used to do all the Configurations in the Integration Builder.
Re: business system
Re: business system
Thanks

Business system and logical system names

hello experts,
Right now m creating scenarios of IDOCs, Files and RFCs. Just wanted to know that is it compulsory to give Business system name and Logical system names same?
Does it make difference if i will give both names different?
Regards,
H.S.

Hi,
I guess i have not explained you proprely.
Here logical system mean m asking abt the system name which we are using in RFC connections to make connection between two systems.
does Business system name and Logical system name should be same?
Actually right now we have done system copy of production system into our sandbox. So all the things are pointing to the production system.
I was just wondering, if i will just change ip/ hostname into the Technical system (ip of sandbox system) and keep business system name as it is( which is right now of production system)... then for me no need to create all ID Objects again. Its just an idea. So just wanted to check is it ok... bcz in ID i have more than 60 objects which i need to create again. and i have very less time
Or if anyone can tell me any good idea to do that.
Thankx in advance.
Regards,
H.S.

Motif ES and Logic

Similar Messages

Maybe you are looking for