Motion 2 Log Errors "invalid drawable" and "Could not find shader normal"

Hi All,
I've encountered a problem with Motion 2, that I hope can be fixed using this info from my log file:
2005-12-15 09:30:56.772 Motion[281] invalid drawable
2005-12-15 09:30:58.195 Motion[281] invalid drawable
2005-12-15 09:31:12.062 Motion[281] invalid drawable
2005-12-15 09:31:21.780 Motion[281] invalid drawable
2005-12-15 09:31:23.803 Motion[281] invalid drawable
2005-12-15 09:31:47.349 Motion[281] invalid drawable
2005-12-15 09:32:05.697 Motion[281] invalid drawable
2005-12-15 09:32:12.018 Motion[281] invalid drawable
2005-12-15 09:32:13.697 Motion[281] invalid drawable
2005-12-15 09:32:15.336 Motion[281] invalid drawable
2005-12-15 09:32:26.878 Motion[281] invalid drawable
2005-12-15 09:32:32.641 Motion[281] invalid drawable
2005-12-15 09:32:34.050 Motion[281] invalid drawable
2005-12-15 09:35:31.921 Motion[281] invalid drawable
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Warning: Could not find shader normal
Since Motion 2 can't find "shader normal", it endlessly writes this error to a log file and in the process SLOWS the program down considerably.
I'm using a dual 2.5 G5, Motion 2, ATI 9800 Pro video card, 4GB RAM.
It seems like this might be a video card problem since that's what the error log may refer to (could not find normal shader).
Has anyone else encountered this issue, or know of a fix?
Thanks All,
Kevin
2.5 G5 Mac OS X (10.3.9)

Haven't seen it before but you'd have to give us some additional information. Most, not all, Motion errors are caused by bad media files or the user attempting to perform an illegal operation like dividing by zero.
But yea, these look like OpenGL or GPU errors. Try dropping by the mfr's site to see if there are new drivers, a reset application or a user forum?
bogiesan

Similar Messages

Everytime I open Firefox - error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again.

Everytime I open Firefox, it shows me a error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again. Help me , Please
Everytime I open Firefox, settings in Network appear: Manual Proxy and shows me a ip number and port

See:
* http://kb.mozillazine.org/Preferences_not_saved

SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)

Hi Gurus,
I am trying to load a HANA column table using the import function and get the following error even though the mappings from the file to the table are 1:1.
I get the following errors:
Error 1: SAP DBTech JDBC: Result set is positioned before first row.
Error 2: SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)
With the following stack trace:
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [259] (at 26): invalid table name: Could not find table/view RS_POOL_CLUSTER_TABLES in schema SYSTEM: line 1 col 27 (at pos 26)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:334)
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateDatabaseException(SQLExceptionSapDB.java:165)
at com.sap.db.jdbc.packet.ReplyPacket.buildExceptionChain(ReplyPacket.java:100)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1141)
at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:888)
at com.sap.db.jdbc.StatementSapDB.sendCommand(StatementSapDB.java:929)
at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
at com.sap.db.jdbc.StatementSapDB.execute(StatementSapDB.java:256)
at com.sap.db.jdbc.StatementSapDB.executeQuery(StatementSapDB.java:401)
at com.sap.db.jdbc.trace.Statement.executeQuery(Statement.java:131)
at com.sap.ndb.studio.bi.dataprovisioning.util.DBUtil.getPoolTables(DBUtil.java:200)
at com.sap.ndb.studio.bi.dataprovisioning.util.DBUtil.getTablesToHide(DBUtil.java:188)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.SelectTableDialog.createDialogArea(SelectTableDialog.java:108)
at org.eclipse.jface.dialogs.Dialog.createContents(Dialog.java:775)
at org.eclipse.jface.window.Window.create(Window.java:432)
at org.eclipse.jface.dialogs.Dialog.create(Dialog.java:1104)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.SelectTableDialog.create(SelectTableDialog.java:186)
at com.sap.ndb.studio.bi.filedataupload.ui.wizards.pages.ImportFileSelectionWizardPage$14.widgetSelected(ImportFileSelectionWizardPage.java:779)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:248)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:826)
at org.eclipse.jface.window.Window.open(Window.java:802)
at org.eclipse.ui.internal.handlers.WizardHandler$Import.executeHandler(WizardHandler.java:152)
at org.eclipse.ui.internal.handlers.WizardHandler.execute(WizardHandler.java:279)
at org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:290)
at org.eclipse.ui.internal.handlers.E4HandlerProxy.execute(E4HandlerProxy.java:90)
at sun.reflect.GeneratedMethodAccessor33.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56)
at org.eclipse.e4.core.internal.di.InjectorImpl.invokeUsingClass(InjectorImpl.java:243)
at org.eclipse.e4.core.internal.di.InjectorImpl.invoke(InjectorImpl.java:224)
at org.eclipse.e4.core.contexts.ContextInjectionFactory.invoke(ContextInjectionFactory.java:132)
at org.eclipse.e4.core.commands.internal.HandlerServiceHandler.execute(HandlerServiceHandler.java:167)
at org.eclipse.core.commands.Command.executeWithChecks(Command.java:499)
at org.eclipse.core.commands.ParameterizedCommand.executeWithChecks(ParameterizedCommand.java:508)
at org.eclipse.e4.core.commands.internal.HandlerServiceImpl.executeHandler(HandlerServiceImpl.java:213)
at org.eclipse.ui.internal.handlers.LegacyHandlerService.executeCommand(LegacyHandlerService.java:420)
at org.eclipse.ui.internal.actions.CommandAction.runWithEvent(CommandAction.java:157)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:584)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:501)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1057)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:4170)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3759)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine$9.run(PartRenderingEngine.java:1113)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.e4.ui.internal.workbench.swt.PartRenderingEngine.run(PartRenderingEngine.java:997)
at org.eclipse.e4.ui.internal.workbench.E4Workbench.createAndRunUI(E4Workbench.java:138)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:610)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:567)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:150)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:124)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:354)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:181)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:636)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:591)
at org.eclipse.equinox.launcher.Main.run(Main.java:1450)
at org.eclipse.equinox.launcher.Main.main(Main.java:1426)
I'm sure many of you have come across this before. Any help will be much appreciated.
Thanks in advance

Hello Akhtar,
Have you tryed to delete the heador row from your file?
I received the same error when loading a csv file, but when I delete the heador row it worked.
Best Regards,
Juliana Genova

Error-RC-20200: Fatal: Could not find Unzip. At this time only Native UnZip

Hi all,
I am installing 12.1.1 in Oracle linux 6.1 server 64bit, while starting rapidwiz getting error
"RC-20200: Fatal: Could not find Unzip. At this time only Native UnZip 5.X is supported.
Please make sure you have UnZip 5.X in your path and try again...
Unable to complete install of database
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process
i am straggling for last two day, pleas help me move forward.
Thanks a lot...
Regard
KSURESH

I am installing 12.1.1 in Oracle linux 6.1 server 64bit, while starting rapidwiz getting error Your OS is not certified with R12, so please install a certified one -- Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein

FF not connecting to web- This "Network Connections" message pops up: Error 623: The system could not find the phone book entry for this connection. Any ideas?

About a month ago I could no longer connect to the internet on our PC. Every time I clicked on the Firefox icon the Netscape sign-on window would pop up. I would try to close it but it would pop up over and over again. If I tried to close it a dozen or so times eventually Firefox would open up but it would never connect. Just today I moved my Netscape file to the recycle bin. No longer does the Netscape sign-on window pop up but following Network Connection error message pops up: "Error 623: The system could not find the phone book entry for this connection".. This error window behaves the same way the Netscape sign-on window used to behave. Every time I click to close it it pops open again. After numerous clicks Firefox opens up but it never connects.

Do you have this error message on a Mac computer or on a Windows computer?
I've only seen this error mentioned on a Windows computer.
*http://kb.mozillazine.org/Autoconnect

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know wha

I have just installed Lightroom 5 on iMAC (OS X ver 10.9.4). When I click on 'Import' to start working on some photos, the following error message pops up: "An internal error has occurred. Could not find namespace: AgCreativeCloudUtils". Anyone know what the problem is and how to fix? Thanks.

https://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…

How do I install Netgear XE102 on my iMac? It will not install off of the cd provided it appears to be only for Windows based computers. Checked Netgear website and could not find a setup.exe file for Mac.

Unable to install Netgear XE102 on my iMac. Checked Netgear website and could not find a setup.exe file for Mac.

That means either no software needs to be installed on a Mac or the product is incompatible with Macs. Contact NetGear tech support for help.

HT1553 What is the best system for a real time cloud back up of documents? My MacBook crashed, and I lost 2 hours of writing and could not find a way to restore it.

My MacBook Pro crashed while I was rewriting a book, lost more than an hour of work and could not find a way to restore it. Did not have Time Machine set up, but it appears that Time Machine does not have Real Time back up and documents must be manually stored.
I need an automatic, real time back up to keep this from happening - I'm not happy my MacBook has crashed twice now. What is the best cloud system for Real Time backup? Thanks to anyone who can help me, I'm not the most astutde computer guy... James

One way would be to use Dropbox, or a similar sync service, and just keep your critical documents in the appropriate folder. Dropbox, at least, keeps a local copy of everything and syncs automatically to the cloud whenver a change is made. Dropbox is free for up to 2GB of data.
There are also true backup services such as CrashPlan+:
http://www.crashplan.com/consumer/crashplan-plus.html
which provide automatic backups whenver a change is detected. It's not free, but usually such services aren't too expensive unless you need to back up a lot of data.
Regards.

I bought a mac book pro 15" with retina display and could not find the user's guide/manual anywhere, except for the wuick start manual. I couldn't even find it in apple's web site. Where is it?

I bought a mac book pro 15" with retina display yesterday and could not find the user's guide/manual anywhere. I couldn't even find it in apple's web site. Where is it?

here it is : http://manuals.info.apple.com/en_US/macbook_pro-13-inch-late-2012-quick_start.pd f
Apples dont come with say, a big manual like old things used to. Basically its a just a quick reference guide, everything on specifics is online
Heres a great book everyone raves about, as far as the OSX and being familiar with it> http://www.amazon.com/gp/product/1449330274/ref=s9_psimh_gw_p14_d1_i1?pf_rd_m=AT VPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0J2E0HXQBHJK423PADBV&pf_rd_t=101&pf_rd_p=13 89517282&pf_rd_i=507846

Event ID 57 - Could not find stored procedure 'dbo.proc_MSS_CrawlAdmin' and Could not find 'dbo.proc_MSS_Crawl'

Sharepoint Enterprise 2010 - sp1 (feb. 2013 cu) - running enterprise search service
Running sql. 2012 enterprise
Event log has constant event ID 57 with A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 2812 occurred 1 time(s) Description: Could not find stored procedure 'dbo.proc_MSS_Crawl' and along with it another Could not find
stored procedure 'dbo.proc_MSS_CrawlAdmin'.
How do I fix this issue?

Hi there,
I am seeing this issue (just the "proc_MSS_Crawl" stored procedure, not the other). Did you find a fix for this? Did you try running the configuration wizard to see if this resolved it?
Regards,
Ben
Ben Weeks
SharePoint Consultant @ Webtechy Ltd
T: +441223922070 F: +448701315220
Web: http://www.webtechy.co.uk Blog:
http://blog.webtechy.co.uk

Error when deleting file: Could not find this item. This is no longer located in ...

We are setting up a new Windows 2012 server. Users access this server using a 'terminal services'. We have mapped some folders from a legacy server (different domain). Using group policy preferences, we map this folder as a drive for a user.
When user wants to delete some files, he get's the error: 'Could not find this item ..' The error is displayed to the user and it looks like the file can't be deleted. But when I press the F5 (refresh) button, the file is gone. My problem is very similar
to a problem in the following post: http://social.technet.microsoft.com/Forums/windowsserver/en-US/042e747a-0e25-4190-b0a2-82f3e9635eb0/can-not-delete-file-error-is-could-not-find-this-item?forum=w7itprogeneral
When I create 'txt' (or 'pdf', 'zip') file, i can delete it without the error. When I create 'xlsx', 'docx', 'pptx', 'bmp', 'jpg', I get the error.
Does somebody have an idea, how can I fix the cause of this problem? (I can't tell to users to hit the F5 button everytime when they face this issue)
Thank you for your help in advance!
Juraj

Hi,
Please check if the problematic files’ filename ended with a dot. If so, you could refer to the article below to troubleshoot the issue:
Solved: “Cannot read from the source file or disk”
http://blog.dotsmart.net/2008/06/12/solved-cannot-read-from-the-source-file-or-disk/
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I am constantly receiving an error message that says "Could not find a PPPoE Server." My wireless internet connection seems to working fine, I'm not having any issues. How do I get rid of this error message?

A few weeks ago my computer had lost the connection to the wireless internet. I set it up again and was able to connect to the internet, however since then I've been receiving an error message "Could not find a PPPoE Server." I went back into Preferences and unchecked the PPPoE server option but the error message still pops up.
Any idea how to fix it?

In the Network pane of System Prefences, do you have duplicate services on the left column? When you "set it up again", you might have duplicated a service and both (the good working one and the previous that lost connection) might be trying to connect at the same time.

Send spool as PDF, error in opening PDF- Could not find the XObject '00014'

Hi
I am sendind a spool as PDF and when opening the PDF I am getting error saying Could not find the XObject named 00014.
Please let me know how I can see the PDF contents proerly.
Regards
Bala

Hi Bala
Check the sample which can be useful for you.
Pseudo code for sending PDF attachment:
TABLES: tsp01.
TYPES: BEGIN OF t_spool,
                      Rqident TYPE tsp01-rqident,
                END OF t_spool.
DATA: i_spool TYPE STANDARD TABLE OF t_spool,
            Wa_spool TYPE t_spool.
SELECT rqident FROM tsp01
INTO TABLE i_spool
WHERE rqowner = sy-uname.
SORT i_spool DESCENDING BY rqident.
LOOP AT i_spool INTO wa_spool.
ENDLOOP.
YPES: l_ty_tab_pdf TYPE tline OCCURS 0.
DATA: l_pdf TYPE l_ty_tab_pdf,
            l_spool TYPE tsp01-rqident.
Type for binary attachment table.
TYPES: l_ty_tab_objbin TYPE solisti1 OCCURS 0.
DATA: l_objbin TYPE l_ty_tab_objbin.
            l_spool = wa_spool-rqident.
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid                    = l_spool
        no_dialog                      = ' '
      TABLES
        pdf                            = l_pdf
      EXCEPTIONS
        err_no_abap_spooljob           = 1
        err_no_spooljob                = 2
        err_no_permission              = 3
        err_conv_not_possible          = 4
        err_bad_destdevice             = 5
        user_cancelled                 = 6
        err_spoolerror                 = 7
        err_temseerror                 = 8
        err_btcjob_open_failed         = 9
        err_btcjob_submit_failed       = 10
        err_btcjob_close_failed        = 11
        OTHERS                         = 12.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
**/ Convert the PDF format to the table type required for the attachment.
CALL FUNCTION 'QCE1_CONVERT'
    TABLES
      t_source_tab         = l_pdf
      t_target_tab          = l_objbin
    EXCEPTIONS
      convert_not_possible = 1
      OTHERS               = 2.
IF sy-subrc <> 0.
    WRITE: / 'error', sy-subrc.
ENDIF.
TABLES: soli.
DATA: v_email TYPE soli-line. Managers Email
DATA: l_adrnr LIKE kna1-adrnr. Address Number
DATA: l_objky TYPE nast-objky. Object Key
DATA: l_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: l_objtxt    LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_objpack   LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: l_doc_chng LIKE sodocchgi1.
DATA: l_objhead   LIKE solisti1 OCCURS   0 WITH HEADER LINE.
DATA: l_tab_lines LIKE sy-tabix.
CONSTANTS: k_true TYPE boolean_flg VALUE 'X'.
DATA: l_mail TYPE somlreci1-receiver.
l_mail = v_email.
Creation of the document to be sent as File Name
l_doc_chng-obj_name = 'SENDFILE'.
Mail Subject
l_doc_chng-obj_descr =l_text-001.
Here text-001 will contains Compensation Review Statement for Employee Name
Here we can concatenate employee first name and last name to l_text-001.
Completing the recipient list
l_reclist-receiver = l_mail. Manager Email Address
l_reclist-rec_type = 'U'.
APPEND l_reclist.
Mail Contents
l_objtxt = text-002.
APPEND l_objtxt.
Calculate email size in bytes
DESCRIBE TABLE l_objtxt LINES l_tab_lines.
READ TABLE l_objtxt INDEX l_tab_lines.
l_doc_chng-doc_size = (l_tab_lines - 1 ) * 255 + STRLEN( l_objtxt ).
Creation of the entry for the compressed document for the email text
CLEAR l_objpack-transf_bin.
l_objpack-head_start = 1.
l_objpack-head_num = 0.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'RAW'.
APPEND l_objpack.
Creation of the document attachment
(Assume that the data in OBJBIN is in BMP format)
DESCRIBE TABLE l_objbin LINES l_tab_lines.
l_objhead = text-001.
APPEND l_objhead.
CLEAR l_objpack.
Creation of the entry for the compressed/attached document
l_objpack-transf_bin = k_true.
l_objpack-head_start = 1.
l_objpack-head_num = 1.
l_objpack-body_start = 1.
l_objpack-body_num = l_tab_lines.
l_objpack-doc_type = 'PDF'.
l_objpack-obj_name = text-005.
l_objpack-obj_descr = text-001.
l_objpack-doc_size = l_tab_lines * 255.
APPEND l_objpack. "/ .
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = l_doc_chng
      put_in_outbox              = 'X'
    TABLES
      packing_list               = l_objpack
      object_header              = l_objhead
      contents_bin               = l_objbin
      contents_txt               = l_objtxt
      receivers                  = l_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
IF sy-subrc <> 0.
    WRITE: / 'unsuccessful', sy-subrc.
ELSE.
    WRITE: / 'successful'.
ENDIF.
*Take note it is a requirement to do a commit work for the email to go into transaction
SOST.
COMMIT WORK.
Regards,
Sree

Error in executing mappings "could not find program unit being called"

I am trying to deploy a mapping from the control center in Oracle WareHouse Builder usign Oracle 11g . Here is what i exactly do , first I generate the mapping it goes okay with an insignificant warning .. After that I right click the mapping and click start (for exection to begin).. Eventually I get the error
STAGES_MAP
Error
ORA-04063: package body "ACME_DWH.STAGES_MAP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "ACME_DWH.STAGES_MAP"
ORA-06512: at line 1
what does "could not find program unit being called" mean ?? I validated all my tables and its realated table and successfully deployed them ... but now the mappings is giving me trouble ??? Whas going on... I am confused.... Thansk....

ScoobySi wrote:
It sounds as though you've generated but haven't actually deployed the mapping to the DB? That error usually occurs when the package for the mapping is missing from the DB or the parameters have changed.
Ignore above, just read properly, as MccM suggests try to compile package on DB to determine error. If there are no errors, refresh control center or close it and reopen it as it may be trying to call package with old set of parameters.
Si
Edited by: ScoobySi on Nov 30, 2010 4:20 PMExactly , I generated the mappings and then in the control center right clicking on the mappings and consider (default- create new) i deploy it. It goes ahead but tells mer there is a warning , which i already know but chose to ignore. Then i right click on the mappings again and I select start unfortunately at this point this error comes up and my DB doesnt get populated :( ...
I am a bit new so could you kindly go step by step here , how can i compile my package on DB ??? Btw i am using toad to connect to oracle 11g , are u suggesting that using toad i should compile the package ?? if so how ?? hwo would i know the package location ??? as for the second method
"If there are no errors, refresh control center or close it and reopen it as it may be trying to call package with old set of parameters." I doubt it will work as i already tried it. I definitely think there is a problem with the package.. i dont think there is any other problemm... I would really appreciate your help thanks...

Error Msg: "internet connect" "could not find a pppoe server"

Hi,
I'm a mac newbie and am having problems with my new MacBook that I just bought and setup yesterday. When the setup asst is asking questions when I first started the computer, I mistakenly chose connect via pppoe. Then, when the setup asst ended, I realized my mistake (b/c I am using a dsl connection that I plug in through my ethernet port), went into system preferences--network-- and chose ethernet, using DHCP. Now I am able to connect to the internet and get my mail, but I keep getting a pop-up window called "Internet Connect" that says "Could not find a PPPOE server". Can someone tell me what I need to change? Thanks.

Welcome to Apple Discussions:
In Network Preferences, where you setup the DHCP, click configure again and select Create PPPoE service, and remove/undo whatever you entered in those dialog boxes. Then re-select DHCP.
Leave the default name, PPPoE but just remove everything else.
If there are any check boxes to connect via PPPoE, be sure they are unchecked.
If that does not help, then in your user library/preferences directory, drag the following file to the desktop and reboot
com.apple.internetconnect.plist
That should take care of it.
Message was edited by: nerowolfe
Message was edited by: Theodore

Motion 2 Log Errors "invalid drawable" and "Could not find shader normal"

Similar Messages

Maybe you are looking for