Motion 3: Animated parameter does not appear in Keyframe editor

Hello World
I buyed the FCS2 update a few monts ago and now want to make a very simple animation in Motion 3 - but it seems to be not possible!
- I create a new text
- I place the playhead at frame 0
- I set the tracking parameter (I don't know if it's the right word in english, I mean the space between the characters) to 0, where it already has been
- I go to the information window and add a keyframe to the tracking
- Now I place the playhead at frame 26
- Now I set the tracking to 10
- I add a keyframe as I did before
When I now play the sequence, the text becomes wider and wider - as I want! BUT: The animated Parameter (in german Motion calles 'Stil.Laufweite', maybe 'Style.Tracking' in English) will not show up in the keyframe editor. If I go to 'All' in the keyframe editor, I can see the animated Style.Tracking. But if I go to 'Animated', It will not show up.
If I proceed the same way with the transpacency or something like that, the parameter will be shown up in the keyframe editor.
I hope someone can help me but I think it's a bug!
Best regards
Remo

Welcome to the discussions - have you upgraded to 3.0.1? That fixed a lot of little bugs.
Patrick

Similar Messages

Send-file nocache parameter does not appear to work in web server 7U1

Hi all,
I tried the nocache parameter on my webserver 7U1 deployment and it appears to have no affect - i.e. the specified files are still cached.
Reference:
http://docs.sun.com/app/docs/doc/820-1062/abuli?l=en&a=view&q=nocache
I tried this on a Webserver 6.1 installation and it worked properly.
Here's my obj.conf settings:
<Object name=default>
NameTrans fn="pfx2dir" from="/pdf/MNFS" dir="/opt/webserver7/https-orion/docs/orion/pdf/MNFS" name="pdf"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
</Object>
<Object name="pdf">
Service method="(GET|HEAD)" type="*~magnus-internal/*" fn="send-file" nocache=""
</Object>
Any body else have this problem w/ web server 7? Any help would be greatly appreciated.
thanks,
Rob

Hi guys,
Thanks very much for the help - it was enough for me think more about it and solve the problem.
To answer mv's question, I did previously try the nocache on the default object and it didn't work either (but I will explain the reason below). I knew the file was cached, by seeing the old file in the browser even when refreshed and when checking the access log, the returned byte size was the same as the old file.
elving's comments indirectly led me to the problem, and I'm embarrassed to say it was actually an application error. We're using virtual web servers, and I had been modifing the correct obj.conf file (confirmed by server.xml) - the problem was that the application setting was pointing to the same physical server, but using a different hostname - d'oh!
So in other words, I was updated the conf file correctly for virtual server aaa.com, but the app was set to bbb.com (same physical machine), so the same file was being retrieved but my nocache directives for aaa.com we're being ignored.
Anyway, thanks again everyone for their help - much appreciated!!
cheers,
Rob

Why local file destype does not appear in the parameter form ?

Hi,
There is a Destype option Local File but it does not appear in the list for Destype in the Parameter form.Why?
Even file is not working & the reports server is getting hanged if i specify the destype as file & a valid file name & format is given.
Print option from the app server is also not working, i mean remote printing.
My App server machine can see my local printer, but when i give the print share name or literally five\\machine name..printername then too print option is not working.
Thanks
Mahesh

Hi Shaun,
I'am using 9iDS & the reports documentation says that Local File DesType Option is valid for rwclient & rwservlet.
When your specify in the command line option it works, no issues but in web reports where i get the parameter form Destype list does not contain Local File Option.
For web reports i use rwservlet.
i mean to say my url is something like this
http://oracle.guru:8888/reports/rwservlet?report=abc.rdf&userid=a/b@c&destype=cache&paramform=yes&server=myserver
one more peculiar thing, i have reported it on Metalink.
As you can see in the above URL i have given an argument of destype=cache, if i do not give this then my parameter for will not come up!!!, why should i give a destype for the parameter form to be displayed?
Ok coming to my current problem..
in 9iDS Reports is Local File supported? i.e. when i give a URL like above(My parameter form has system & user parameters including DesType,DesName & DesFormat).
coming to the file option in DesType.
In my parameter form if i select Destype as File & give a valid file name & a valid Desformat the report server hangs i mean there is no activity on the client & after this any report requests from any other clients is not responded by the Reports Server.
When i check in the performance monitor of my Reports Server the CPU Utilization will be constant at 100%
Thanks
Mahesh

Spry menu bar does not appear over flash elements in I.E. 8

Hi, My spry menu bar does not appear over any flash elements in I.E. 8. Every other browser it workd fine. Can anyone please help? Thanks
A link to one of the pages is http://www.innervisionfilms.tv/pages/showreel.html
My spry code is
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: auto;
    font-family: Verdana;
    color: #000033;
    font-weight: bold;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 130px;
    float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    position: absolute;
    left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 8.2em;
ul.MenuBarHorizontal ul li a
    width: 10.2em;
    background-color: #4E81B4;
    left: auto;
    background-image: none;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border-top-width: 0px;
    border-right-width: 0px;
    border-bottom-width: 0px;
    border-left-width: 0px;
    border-top-style: solid;
    border-right-style: none;
    border-bottom-style: none;
    border-left-style: none;
    border-top-color: #FFFFFF;
    border-right-color: #FFFFFF;
    border-bottom-color: #FFFFFF;
    border-left-color: #FFFFFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    background-color: #EEE;
    padding: 0.5em 0.75em;
    color: #000033;
    text-decoration: none;
    font-family: Verdana;
    font-size: 11px;
    background-image: url(../pagelayout/menubg.jpg);
    font-weight: bold;
    border: 1px solid #003366;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    background-color: #003366;
    color: #FFFFFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #003366;
    color: #FFFFFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(../pagelayout/menubg.jpg);
    background-repeat: repeat;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(../homepagelayout/greenbarbg.jpg);
    background-position: 95% 50%;
    background-repeat: repeat;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;

I still can't find a solution. Changing the parameter wmode:transparent works for .swf files but .flv files do not have the option to add this parameter. If you add it in the script manually it doesn't do anything. Any help would be greatly appreciated. I cn't find any solution online.
Thanks,
Adam

This file does not appear to be a Photoshop file - Menu won't import

I was searching on the forums and found that some other people have had this problem, but I didn't see any solutions.
When I try to build my DVD from Encore, I get this error "This fiel does not appear to be a Photoshop file.
I created my menu in Photoshop CS4, imported it as a menu. When I preview in Encore it works fine?
The photoshop file is 8 bit color...should it be 16? I tried that to, but it doesn't seem to change anything?
Any help is greatly appreciated!!!

The 2 bit image object that shows up to the right of the buttons on the highlighted state still was a little too crisp, but
I'm going to try a little vertical blur like you said to see what happens.
Well, the Vertical Blur will not work there. The Sub-picture Highlights cannot have any Styles, or Filters added to them. What I do to "simulate" a "glow" is to to create a second Sub-picture Highligh, in the next Layer down (in the same Button Layer Set)t, ever so slightly larger. I then set it's Transparency in Encore to be about 50%-30% of what the "original" Sub-picture Highlight's Transparency was. You can also assign another number from the Menu Color Set (this is done in PS), and then adjust that number's value in Encore to be a shade lighter of the original Sub-picture Highlight's. You will end up with maybe a 2 and a 3, and need to pick those colors from a Custom Color Set in Encore - cannot be done in PS, at least through CS3 and I do not believe in CS4 either. That might bear checking out, with someone like Jeff Bellune, or Jbowden. See this LINK for some tips, and this one for the full ARTICLE. The link to the version posted on Adobe has been lost, with the changeover in the forum. You can post and read at Muvipix.com, without a subscription, or even the free signup. Because of the wealth of Functional Content, stock music and Menus, etc., you might want to spend a bit of time poking around there.
Though most of the article and discussion revolve around removing part of the Sub-picture Highlight, the final steps are for adding what appears to be a Blur. Remember, you only have ON, OFF, COLOR (limited to 4, including the background) and TRANSPARENCY, for each pixel in a Sub-picture Highlight. That's why you cannot have Styles, or similar. You have to create the illusion.
Also, I created my lower third in Photoshop and saved out a .PNG file to import into Premiere.
When I play the DVD, there seems to be some noise in the title. Do you think that's because of how
I saved the video out or because I used a .PNG?
I do not know. I have never used the PNG format. Instead, I create all of my Titles (the ones that I do outside of Titler) in PS, often using AI for shapes, that will be Rasterized in the process. I do my Titles there, and then Save_As .PSD. If I wish to animate some of the Layers, I'll Import as a Sequence, if not, I Import as Footage. I always start from the image Preset to match my Project, so frame size and PAR are right to begin with. The only reason that I can think of for using PNG is the Transparency, but PSD offers that, and so much more.
There is much that one can do with the animation of PSD Layers in PrPro. It's not as powerful, or as full-featured, as is AE, but many are surprised at how good it is.
Best news is that you are almost there, and that things looked good on the DVD. If you have any trouble following the steps for the simulated Glow in the second Sub-picture Highlight, just let me know. It's been a whle, since I wrote that, and might need to re-visit it myself.
Good luck,
Hunt

Forms 10.1.2.0.2: Web Form does not appear at Runtime with CALL_FORM

Hello there,
We have a number of forms we're executing as web forms using Oracle JInitiator 1.3.1.22. We have one form in particular that, when a button is pressed, is supposed to call another form via the CALL_FORM built-in.
We are passing a parameter list to the new form, and executing the CALL_FORM built-in with these Setting Parameters:
CALL_FORM( formmodule_name => '<OUR_FORM_NAME>',
           display         => NO_HIDE,
           switch_menu     => NO_REPLACE,
           query_mode      => NO_QUERY_ONLY );When we run the starting form as a web form (via JInitiator 1.3.1.22), and press the button to call the other form, all buttons on the starting form are greyed-out/disabled. The called form does not appear.
I have carried out a number of checks with my own debugging tool (stored procedure writing messages to a table via an autonomous transaction), and forms focus is definitely been transferred to the called form. For example, the WHEN-NEW-FORM-INSTANCE trigger in the called form is definitely being executed.
I suspect this problem is JVM-related rather than Forms-specific. My current plan of attack is to request the Application Server Logs tomorrow morning (I don't currently have access to them) and see if I can find any Java-related error messages. However, if any of you reading this have experience of this type of problem and can offer any assistance, please don't hesitate to let me know your suggestions/advice.
Cheers.
James

You could check the settings of the window in the calling form. If its set to "Modal" or "Dialog", and the window in the called form has other settings, the new window might be opened "behind" the old window.

Outlook does not appear as an option when setting up synchronization

I need help. I recently bought the BB Curve 8330. When I attempt to set up the sync configuations between Outlook and the BB, Outlook does not appear as a choice. What do I need to do to get Outlook to appear? I called Verizon customer service and they were not much help. Please help.
I am running MS Vista 2007.
Solved!
Go to Solution.

HI,
On your Blackberry go to OPTIONS/ABOUT the OS version looks like 4.x.x.xxx.
On your outlook are you running any connectors (business, hotmail etc) ?
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
Vista commands
1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> CD program files\research in motion\blackberry\is71 connectors\ms outlook connector
3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
4. If the registration is successful, the following message displays:
DllRegisterSErver in msoutlookconnector.fil succeeded.
5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin.
Let me know about the device and the version of desktop software.
Message Edited by Bifocals on 10-30-2008 11:41 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Profiling application but component does not appear in Live Objects

I have built an application using Flash Builder 4.6 and Flex SDK 4.6, which consists of many custom-built components, some of which are vast and contain lots of code. When I run the application, one of the components which loads using PopUpManager is causing the memory usage in Task Manager to increase and despite closing/reopening the component, the memory usage never goes down, only up. Eventually the process runs out of memory and crashes.
So I'm trying to profile the application. When I run the profiler, I can see all the classes opening into the Live Objects window. However when I load the component which is eating the memory, it appears in my application but does not appear in Live Objects, nor does any of its children.
What would cause this to occur?
Also am I doing the right thing by using components or should I be using modules instead?

hi Venkat,
it seems that 0sold_to not assigned to any infoobject catalog, you can try modify it with RSD1, to bring it to infoobject catalog, you can choose one infoobject catalog right click, change, and move 0sold_to from left to right and activate the infoobject catalog or use following function module (SE37)
hope this helps.
RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute
Note 573421.

Query Selection Screen does not appear in Web Analyzer

Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh Kumar

Dear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind

BI JDBC system does not appear in a search in Visual Composer of CE7.1

Hi All,
I have configured BI JDBC system in CE7.1 but it does not appear in a search in visual composter.
I have using following connection parameter while configuration of BI JDBC system in CE 7.1.
Oracle Deriver - classes12.jar / ojdbc14.jar
Connection URL - jdbc:oracle:thin:@xx.xx.xx.xx:1527:BWI;SYSTEM;xxxx
Driver Class Name - oracle.jdbc.driver.OracleDriver
Platform details for BI and CE 7.1
OS AIX 6.1
Database Oracle 10.2
Apart from this I already check SAP Note 1247283,1169625,1138877,773401 but still is not working.
Please help me on same.
Thanks,
Harshal

Created BI master system and problem is solved.
Edited by: Harshal Subhash Dusane on Aug 12, 2010 2:03 PM

Drop Down Menu does not appear

Hi,
We're working on EP7 for CRM 5.0... from a particular user (let's say user :ab), while creating a <b>new</b> : Account, Lead, Activity etc. the <b>drop down menu under the button New does not appear</b>..instead it throws an explorer error (error in line 126...access denied etc.)
rest of the users with the same role (in the back-end & front-end) are working perfectly. we have tried re-assigning the role and also changing the buffer parameter but still the drop down list does not appear... kindly suggest me a solution.
thnx bye.

no it does not depend on that
i have found out the "solution" to the problem, i had changed the default value of the date from (DD.MM.YYYY to Islamic date ) field in SU01 for that user , now when i revert the changes back to the default value, it works fine...and he's able to see the values in the drop-down now.
the customer still needs the Islamic dates.... so half the prob. is solved, the other half remains unanswered ..... kindly advise
any idea why would the date change cause the menu not to populate?
thnx.
Message was edited by:
Jacob Raj

How can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it? iPhone 5, iOS 7

how can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it?
iPhone 5, iOS 7

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

When I select video to sync in iTunes it. Does not appear on my ipad2, When I select video to sync in iTunes it. Does not appear on my ipad2

When I select video in iTunes to sync it does not appear on my ipad2, why?

First make sure it's compatible
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
It will appear in your videos app if synced

I have a problem in exporting the video icon does not appear "share"

Hi,
I purchased the program motion 5 from Apple Store
But I have a problem does not appear Icon
I experimented with the trial version before to buy the full version
Now I am very disappointed because all attempts failed
I have read some of the solutions in this site but to no avail
Thank you in advance for helping me
Said

But I have a problem does not appear Icon " share "

I am trying to set up Sharing amongst several computers on my home network. I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up). There is no explanation why.

I have been trying to set up Sharing between two computers on my network. I did this once and it worked. However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer). There is no explanation as to why not. Is this a configuration problem, a network problem or what? Can it be fixed? I have tried turning sharing off and back on on both computers but to no avail. What am I missing? Thanks for any help you can provide.

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

Motion 3: Animated parameter does not appear in Keyframe editor

Similar Messages

Maybe you are looking for