Motion 3, DVD Studio Pro 3, Compressor...fail to display interface

Macbook Pro C2D, Leopard OS X 10.5.1. All apps were running perfectly before this happened...
First, all the apps of Final Cut Studio 2 crashed on startup.
I recall that the last thing I did is trashing the newly installed trail version Aperture.
After checking the crashing log, I found the problem comes from Prokit.framework. I did a thorough search, the answer is quite clear that the Prokit.framework comes with Aperture 1.5.2 is a PPC version, it replaced the intel version that was in my OS. So the solution is replacing the PPC version back to Prokit for Intel. Finally I found some provided download links of Prokit for Intel. BUT..
All the Prokit online are extracted with Pacifist from either Tiger OS disc or ProAppRuntime4.0.2.pkg(from apple's website). So they are either version 3.1 or version 4.0.2. After replacing my Prokit.framework with version 4.0.2, all my FCS 2 apps except Final Cut Pro (but Log and Transfer inside FCP 6) stopped crashing but failed to display any interface. But the icons are in the dock.
So finally I cleaned up all the files related to Final Cut Studio 2 and Prokit.framework and did a fresh reinstallation of FCS 2.
Same thing! No interface at all.
At this point, I doubt if the Prokit.framework in Leopard OS disc is different. It's too bad that I'm traveling for a project and my Leopard DVD is not in hand. So I asked a friend using Pacifist to extract Prokit.framework and Browser.framework from his Leopard DVD and sent them over. Now I found that they are indeed different. The one from Leopard is version 4.1. I did a replace again. Now, Motion 3, DVD Studio Pro 3 and Compressor start up, but with black windows and a few images, and the menu bars are really weird. I guess I should install this two framework with Pacifist instead of replacing them with the extracted folders?
The last resort I guess is to reinstall Leopard? My dilemma if I don't finish my project, I have no access to my OS DVD, but I need to use FCS 2 to finish the project.
Has anyone run into the same situation? Any enlightenment will be appreciated!

I have just installed Leopard ans having problems with DDVDSPRO crasshing, can you please expand on how i may install prokit.framework and Browerkit frame work with Pacifist. I am not an expert please bear in mind!!
many thanks

Similar Messages

Motion 3, DVD Studio Pro 3...All Pro apps got corrupted by Aperture

Macbook Pro C2D, Leopard OS X 10.5.1. All apps were running perfectly before this happened...
First, all the apps of Final Cut Studio 2 crashed on startup.
I recall that the last thing I did is trashing the newly installed trail version Aperture.
After checking the crashing log, I found the problem comes from Prokit.framework. I did a thorough search, the answer is quite clear that the Prokit.framework comes with Aperture 1.5.2 is a PPC version, it replaced the intel version that was in my OS. So the solution is replacing the PPC version back to Prokit for Intel. Finally I found some provided download links of Prokit for Intel. BUT..
All the Prokit online are extracted with Pacifist from either Tiger OS disc or ProAppRuntime4.0.2.pkg(from apple's website). So they are either version 3.1 or version 4.0.2. After replacing my Prokit.framework with version 4.0.2, all my FCS 2 apps except Final Cut Pro (but Log and Transfer inside FCP 6) stopped crashing but failed to display any interface. But the icons are in the dock.
So finally I cleaned up all the files related to Final Cut Studio 2 and Prokit.framework and did a fresh reinstallation of FCS 2.
Same thing! No interface at all.
At this point, I doubt if the Prokit.framework in Leopard OS disc is different. It's too bad that I'm traveling for a project and my Leopard DVD is not in hand. So I asked a friend using Pacifist to extract Prokit.framework and Browser.framework from his Leopard DVD and sent them over. Now I found that they are indeed different. The one from Leopard is version 4.1. I did a replace again. Now, Motion 3, DVD Studio Pro 3 and Compressor start up, but with black windows and a few images, and the menu bars are really weird. I guess I should install this two framework with Pacifist instead of replacing them with the extracted folders?
The last resort I guess is to reinstall Leopard? My dilemma if I don't finish my project, I have no access to my OS DVD, but I need to use FCS 2 to finish the project.
Has anyone run into the same situation? Any enlightenment will be appreciated!

Similar to the problems diagnosed in another thread - though they used the retail installation I think.
This is a link to how they fixed it:
http://discussions.apple.com/thread.jspa?threadID=1311441&tstart=0&messageID=620 4405#6204405

TS3968 This also affect DVD Studio Pro and compressor.

This also affect DVD Studio Pro and compressor, that were useless after upgrading to Snowleopard. Prokit 7 solved the problem. How come it doesn't come automatically with software update? Lost two hours on a crashed DVD project and looking for this very simple solution. Love you Apple, but this time you let me down...
After updating to Snowleopard, FCP comes up with a warning about unsupported enablerfiles during start-up. Prokit 7 didn't solve that problem. Anybody...?

Right on, Eric.
I'm a devoted Windows man, but I must say that DVDSP is the best DVD authoring software I've tried so far.
As far as compressor goes, it depends what program you are exporting from and for what purpose. There are many options in there and I for instance found out that using something like a Photo JPEG compression rather than a DV PAL setting for a project that was all in DVD PAL gave a better output.
Compressor is a pretty big program and by trying different things out, you can probably find what you need.
Sounds like there could be a problem with your computer if everything comes out as crappy as you say...?
Good luck figuring it out or make your mpegs on PC's TMPGEnc. (He-he... )
4 x 2.5 GHz PowerPC G5 Mac OS X (10.4.8) 4.5 GB DDR2 SDRAM

I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=22% 26section=9%26tasks=true

Quality of DVD Studio Pro using Compressor vs iDVD

Sorry to repeat the question below, which I have also posted under DVD SP...I thought that perhaps someone watching Compressor would also have input.
I have been trying to obtain a DVD output with DVD Studio Pro where moderate speed pans don't jerk. Oddly, I get better results using iDVD. The image in iDVD isn't as sharp, but the quality of movement (pans, tilts) is smoother. My program length is only 20 minutes and I have used compressor to encode outside of DVD SP. The compressor setting was for DVD, 60 mins, best quality. Why is it that a consumer software such as iDVD yields better results in this aspect? What am I doing wrong in DVD SP that results in less than professional results. All input appreciated. Thanks in advance

Pamela
hy is it that a consumer software such as iDVD yields better results in this aspect? What am I doing wrong in DVD SP that results in less than professional results.
You are messing around with Compressor settings . . . I guess!
Hope that helps !
Alberto

Sending a template design in motion to DVD studio pro

Hi there,
Ok i have been working with Final Cut Pro for years and have never had to do this so im not too sure on how.
I have a awesome motion project that i created into a DVD menu. However how would i move it to DVD studio pro in order to place all my buttons down

Couple of things, first you need to make sure you assign navigation for the buttons, which is why the remote control on the DVD Player did not work, yet you can mouse over in the computer [Assign Navigation|http://dvdstepbystep.com/buttons07.php] and [a thread|http://discussions.apple.com/thread.jspa?messageID=9134310&#9134310]
As to overlays, buttons will not appear (the highlights) until the loop point of the menu, but if ellements are in the background (video) then they will appear. If you do not want those items (in the background) to appear to the loop point you need to fade it in or otherwise do whatever effect you want in the background video. [Motion Example|http://dvdstepbystep.com/motion.php]

Creating a menu and overlay from Motion to DVD Studio Pro

I have created a menu in Motion. My menu plays a short video first before the menu choices come up. After sending it to DVD Studio Pro I noticed that when I burned it I could not access the menu options with my DVD player, only when I played it on my computer and used a mouse.
I tried creating an overlay and using that, but because my buttons do not display right away I am seeing one of the overlay icons right from the beginning.
If there is anyone out there with a suggestions on how I can fix this or create it differently so that I don't have these problems, please let me know!!!

Couple of things, first you need to make sure you assign navigation for the buttons, which is why the remote control on the DVD Player did not work, yet you can mouse over in the computer [Assign Navigation|http://dvdstepbystep.com/buttons07.php] and [a thread|http://discussions.apple.com/thread.jspa?messageID=9134310&#9134310]
As to overlays, buttons will not appear (the highlights) until the loop point of the menu, but if ellements are in the background (video) then they will appear. If you do not want those items (in the background) to appear to the loop point you need to fade it in or otherwise do whatever effect you want in the background video. [Motion Example|http://dvdstepbystep.com/motion.php]

DVD Studio Pro and Compressor suck!

I usually never do this, come to a forum and trash a software. But I must say that Compressor (especially!) and DVD Studio Pro simply suck. They are nowhere near a professional standard. In fact they are worse than other encoding and authoring softwares which would not even dream of billing themselves as "professional".
Everytime I encode something there are pops and pixellations. Most of the time in different places. To ensure that a video is encoded properly (and when I say properly I only mean without defects like pixellation etc), I have to encode it anywhere from 5 to 10 times, with the time expense of watching each version to make sure they are clean. Not to mention the extremely poor quality of encoding, even at best settings.
Artists, musicians, filmmakers - do not even try to use Compressor or DVD Studio Pro for your important projects. Look elsewhere. They will make your hair go white. Apple, shame on you for realeasing such a crappy product!

Right on, Eric.
I'm a devoted Windows man, but I must say that DVDSP is the best DVD authoring software I've tried so far.
As far as compressor goes, it depends what program you are exporting from and for what purpose. There are many options in there and I for instance found out that using something like a Photo JPEG compression rather than a DV PAL setting for a project that was all in DVD PAL gave a better output.
Compressor is a pretty big program and by trying different things out, you can probably find what you need.
Sounds like there could be a problem with your computer if everything comes out as crappy as you say...?
Good luck figuring it out or make your mpegs on PC's TMPGEnc. (He-he... )
4 x 2.5 GHz PowerPC G5 Mac OS X (10.4.8) 4.5 GB DDR2 SDRAM

HD workflow FCP to DVD Studio pro without compressor

I have a completed HD project in FCP and I need to get it into DVDSP without using compressor as this ap is not working and hasn't since I purchased The studio.
Can anyone help?

Normally, you can take the exported movie from FCP directly into DVD SP and it will be encoded there. While this method has far less possibilities for adjustment, in your case it also brings another problem with it...
It uses the Compressor engine to do the job.

Several video assets for DVD Studio Pro 4, Compressor question??

I have several video assets for my DVD, they include motion menus, video tracks etc. When I go into Compressor and process each video asset, do I choose a preset according to that clips individual video length, or do I choose a preset based upon total running time of the DVD?
As always thanks in advance for your time in reading and replying to my Post,
Sebastian

If you go into your Presets Window, and select the pulldown arrow, you will see in detail what preset you need to use.
For example: DVD Best Quality 90 Minutes 4:3 is MPEG2, 6.2mbps, 2 Pass, 4:3
Then to the right it will say "Fits up to 90 minutes of video with AIFF for audio.
Don't even use the presets unless you have like a ton of footage.
But you can get about 80 or more minutes of footage encoded based off of these settings.
Just make a New Preset and type in the following..
New-MPEG2, then double click the Untitled MPEG-2
Video Format Tab - Choose your video settings, rest at default.
Quality Tab - 2 Pass VBR, 7.0 average, 7.4 max, Best
Rest at default.
If you have 80 or so minutes maximum, these are fine.
You should be good.
If you have more, then just drop the bitrate accordingly.
Once you get to 6.5, Compressor starts showing its ugly face.

DVD Studio Pro 4 "Formatting Failed, One of the volumes on the disc is still in use." How do I fix this to burn a project to DVD?

Trying to burn a project to DVD but get this error message: "Formatting Failed, One of the volumes on the disc is still in use."
How can I fix this?
Thank you for the help!

PaulKerepka wrote:
Trying to burn data on a CD-R disk, but then I get a window that says, "Burning failed" , and that one of the volumes on the disc is still in use", so
what does this mean?
You have a disc inside your optical drive.
Not sure what they mean by volume still in use, this apparentely is keeping me from burning info such a pictures and or video's,
how can I fix this?
Remove the extra disc.
My answers are basic because:
You never told us which model iMac you have?
How you are burning? Through iMac? External burner?
Which OS you are currently using?

Installing Motion 2/DVD Studio Pro

I can't seem to run a file called 'part 1' (which I assume is the installing part). it is a UNIX based file but my iMac can't find a program to run it. Can anyone help me?
iMac 20" Core2Duo 2.33Ghz Mac OS X (10.4.7) 250GB HDD | 2GB RAM | iPod 5G 30GB Black v1.2 | iTunes 7 1500+ items

Are you installing from the Studio Discs (sounds like it since you have an Intel Mac and you need Universal Binary to run it, whicch is only the Studio) There is a main install disc which then "requests" each of the other install discs. You start with that disc
There was some issue awhile back with the installer script working on Intel Macs and some of the security updates in 10.4.7 I think (affected Photoshop and also the Studio for some people). But it does not sound like that is the issue.

Aperture and other Pro Applications ( Final Cut, Motion, DVD Studio Pro )

Hi folks,
I have bought Final Cut Studio a while back, and have been working with all the tools for a while now ( FCP, Motion and DVD Studio Pro ). Recently I also switched to Aperture to manage / capture / organise my digital photographs ( previously I used iPhoto ).
Now I was wondering how I could use the pictures from my Aperture library in Motion or DVD Studio Pro. When I look at the file Browser, I can easily use some iPhoto pictures, but apparently I can't seem to find anything for Aperture.
What I would like to do is use some pictures from Aperture in a Motion project and also include an Aperture album in DVD Studio as a SlideShow.
What would be the best way to do this ? Do I have to export the pictures I want to use ? Or am I missing something ?
Regards,
Stefaan

Stefaan,
Unfortunately, that type of integration between the Pro Apps is not there (yet). It would definitely be a nice feature to have. We should all send feedback to Apple asking for this feature. For now, you will need to export photos for use in these other apps.
Along the same lines, I would also like to see integration with Aperture and the "iLife" programs. Since Aperture will likely replace iPhoto for at least some of us, it would be nice to be able to use Aperture photos in these apps as well.
--Joe

Dvd studio pro 4 and motion

I have to create corporate dvd and the want really fancy things. For example..on a menu they want the link buttons..to fly in from the left..then when a link is selected..they want the links to fly out to the left..then have the menu jump.. someone said i could create it in motion..but im havin trouble incorporating motion with dvd studio pro..from saving to exporting to importing in dvd studio pro can anyone help me?..and suggestiong to other resources as well..?

Hi:
You can just use the Motion project itself in DVDSP with no exporting at all, with the advantage that when updating the project you'll see the changes in DVDSP automatically. But your animations could run slow because DVDSP uses AFAIK the Motion engine to render the Motion project.
Another option is exporting your Motion project as Animation and use that file in DVDSP to keep the most of the quality.
Hope that helps !
Alberto

HELP! DVD Studio pro shows a 3GB movie as 88GB!

I am realy in deep troubles!
Doing a (volentary) documentation about my city, the final doc movie will be shown at 7.januar 2006.
Since 1 1/2 year i am working on DVD projekt and nearly finished.Suddenly DVD Studio pro goes crazy.
I have a lot experiances with iMovie and iDVD but not with Production Suite (FCP + DVD Studio pro) .Maybe i have some misstakes done with FCP or DVD studio pro. But i can't see what and why because during this periode i have burened and check it on TV couple of times bevor.I could cry.
Just have upgraded to the newest Production Studio pro Version and same result.
Ok, one thing i have changed, and later the Problems stared!
In DVD Studio pro you can say how much motion you have.
small, meduim,often i guess (have it in german)
This setting worked and i could one time burn a DVD.
I can say the quality was better, better color and less noise or moire.
I changed it back, but no success.
I have seen in the forum discussion about audio which might
doe troubles and some advises using a.peak tool.
I have checked the aiff files and there are terrible big!
350 MB the biggest. I am totaly confiused because it worked bevor. Have checked the sequenzes from FCP which still works.
What would you suggest first befor i jump out of the window.
Many thanks for any helping hand
Sven

Finaly i have solved my problem!
The forum and the helpers did guide me in the right direction.It was not logicaly to me why it work again.
With FCP i could view the sequenz correct.
Then i used compressor-2 with DVD Best Quality, 90min 2 Pass 90min. Best motion. GOP closed.
The output i imported into DVDStudio pro.The import was about 4 minute while bevor it was a few seconds!
I did "clean up" DVDStudio Pro removoed the dvdstudio....plist file -> same result
I did start a new FCP projekt with a new Sequenz, imported all the work i have done befor (lot of work)
and used compressor again.
Then i imported with DVD Studio Pro the compressor files
(this time dolby ac3 audio file) and the import was done very quick.
I could burn the dvd (2.3gb instead of 88GB) and a first quick look this (very early) morning was good!
I chosed this way because i am not sure does working with multiple projekts (not sequenzes) can disturbes the other projekts if they use the same movie. So i will continue with a Projekt, finish them, and start the next from scratch. Hope have no problems like this again ...
regards
Sven

Motion 3, DVD Studio Pro 3, Compressor...fail to display interface

Similar Messages

Maybe you are looking for