Motion 4 and MacBook Pro with integrated nVidia 9400M Grapichs?

Hi. I wonder if somebody has experience using Motion 4 (and/or other motion graphics software)with a MacBook Pro 13" or 15" with integrated nVidia 9400M Graphics.
So far I know those laptops are very good for video editing and Photoshop, but I don't still know about people that animate with them.
Thanks for your answers!

Heya Mark,
Thank you for responding. The information provided leaves a lot to consider. Personally I would consider frequent solo layers or lack of expectance for realtime performance for anything moderately complex in HD comparative to simple, minimal Motion projects as originally stated. But everyone has their own opinion I suppose...
Checked out the first few seconds of your linked reel - pretty cool. Like most reviewing reels I only looked at the first 15 seconds since I consider that the just of the reel. Then I went back and re-watched and I was especially interested in the West Marine flag. Nice fluttering of the flag - produced using only Motion? So you produced that solely on the MBP described in your post? What was the FPS on the project file? Have a project file with included media to download for testing?
Best regards,
OP,
With my profession I use many different systems/configurations on a daily basis. So yes; I have tested the performance on comparative configurations. Cinema 4D does not = Motion and "pretty good" is an opinionated statement. Much like "acceptable" or any other opinion you will receive from your inquiry that begs the opinions from others that may omit specific hardware and/or project configurations comparative to your consideration. Maybe you should try going to a Apple store and testing a project yourself on the machine you're considering... Just a thought.
Yeah your MBP will work - it's just that there's better machines out there can produce better results. If your consideration is the best that you can get for your budget then you'll get the best performance that you can get. I described it as "acceptable". If it's a black/white, yes/no question of whether your MBP consideration will work with Motion then the answer is yes. Otherwise you're asking for an opinion that may contain uncertainty. That's the deal. Best of luck on your hardware choice. I hope it works out for you! The lack of responses tells a tale for me. If this thread was flooded with responses form others saying "yeah the 13" MBP with integrated gfx card works GREAT with Motion" then I might consider the hardware. But two responses saying "acceptable" and "surprising amount" tells me that there's not much to hope for. If you're surprised by the results that your hardware performs at then you should not expect much from the get-go. I expect high performance from Mac Pro - I'm not surprised by its performance.

Similar Messages

  • Can I have an iPhone, ipad and MacBook Pro with the same apple id

    Can I have an iPhone, ipad and MacBook Pro with the same apple id. When I use I tunes it get confusing and I have a paid app that needs the same id

    When syncing the iPhone and iPad with iTunes on your computer that is logged in with the Apple ID you plan on using on all three, the Apple ID should be transferred to the iPhone and iPad for the iTunes & App Stores on each device. If not, you'll need to sign out of the existing Apple ID on the iPhone and iPad followed by signing in with the Apple ID you want to use on both.
    Keep in mind that all 3rd party apps include DRM protection which is tied to the iTunes account or Apple ID that was used to download the apps. With an app installed on your iPad and iPhone that was downloaded with a different Apple ID from the one you will be using now, you will need to use that Apple ID and password to install app updates for those apps. Not possible to transfer apps purchased with one Apple ID to another or to merge Apple IDs.

  • Flash SDK and MacBook Pro with Retina display major issues

    Hello,
    Apple has recently released Macbook Pro's with Retina displays.
    I have tested my Flash application on the new laptop, and this is what I observe:
    My Flex SDK Flash application looks blurry and strange when I try to check it out from any Macbook Pro with Retina display, while looking sharp and OK from all other machines.
    On this screenshot you can sort of see the issue:
    http://i.imgur.com/UXHd4.png
    (Expand the image to the actual size, and compare the Flex SDK components with browser labels. Browser labels look crisp, Flex SDK components look a little bit blurry.)
    Please fix this issue.
    Andrey

    Sure. LR 4.3 even specifically adds Retina support...
    Mylenium

  • MacBook and MacBook Pro with 10.6:  Wireless Airport Issues with Cisco

    Long Story but please bear with me:
    Loaded SL on my daughters MacBook and my MacBook Pro. Internet worked flawlessly at our house (WEP encrypted) and on other public wifi. When my daughter went back to her sorority house at college 24 hours later, she could not access the internet using the sorority house network (Cisco Aironet 1800 router and Cisco Airo Access Points).
    Her Airport on the MacBook appeared connected at full strength yet no internet. Two calls to Apple support (they were very nice) did not help. All the following were tried:
    1. Reset PRAM
    2. Deleted Airport and Safari plists
    3. Edited locations
    4. Removed Battery
    5. Others I cannot now remember
    Still no net. However, she could 'pirate' and hop on line with other identified public wifi adjacent to the sorority house. I drove to the sorority house today and tried to get on the network wirelessly using my MacBook Pro with SL. Same identical results to hers. Another MacBook without SL works great and gets right on the network.
    Is this some SL influenced issue with the Airport card and the Cisco system? Weird that both of our laptops work great with several other wifi networks but not the one at the sorority house.
    Could much of what we all our seeing with the internet access problem lie not with issues within our software or computers but with the routers and access points not being compatible? I have very little understanding of this stuff (as you all can probably tell) but the Apple Support people acted like it was a old firmware issue with Cisco and not with SL. Not actually what I wanted to hear.
    Any ideas or suggestions?

    Your description there, particularly the last part, sounds like my problem. At home, we connect using Airport and ADSL which was OK, once SL had sorted out passwords.
    At my office, where there are two wifi systems, I could not get on either, although did have IP numbers on both. The link to the outside world is via a proxy which uses a PAC file. Network Diagnostics reported each time (whatever I did) that the link to the server was OK, but the Internet was not.
    I created a new Location with identical settings (typing them in and not copying) and the only visible difference is that the new location has no DNS numbers -- I had not noticed that before. The moment I pressed, Apply, the computer was online.
    I was guessing that there was a conflict in a .plist file somewhere; but now I wonder if DNS might have been the reason (the DNS number usually used is the one from the router itself).

  • Files disappearing iMac and MacBook Pro with iCloud

    Just converted to Apple one month ago buying iMac and MacBook Pro.
    iMac at office, MacBook at home.
    My documents are mostly texts with Microsoft Word and numbers with Microsoft Excel.
    I am using the new beta preview Word and Excel.
    I copied everything (15 Go) to iCloud.
    Not only the files don't synchronize between computers, they disappear.

    You'll have to give yourself permission to the files. Do a +Get Info+ via the Finder, click the padlock at the lower right, and enter your Admin password.
    Then click the plus sign at the bottom, and select your user account. That will give you Read rights. Click the arrows in front of +Read Only+ and select +Read & Write.+
    If they're all in a folder, do this on the folder, then click the "gear" icon and select +Apply to enclosed items.+ That may take a while if there are a lot of files.

  • MacBook and MAcBook Pro with ProTools

    I have both a MAcBook and and a MAcBook Pro and ProTools runs fine on the Pro, however on the MAcBook ( 2 gig dual with 1 gig ram) the USB bus does not seem to have the power to drive the PRoTools MBOX 2 interface. ANy info on that? I'm surprised that it wouldn't be able to power it. I tried hooking up a pwered USB Hub, but that didn't do it either.
    Thanks,
    Jon Pousette-Dart

    Check out the compatibility docs on the Digi website. The Macbook Pro is only certified with the USB ports on the left side of the machine. The Macbook is only certified with the USB port closest to the battery.
    On the Macbook this does make a huge difference. Both power the Mbox (I have an original, not a 2), but I get tons of errors if I use the wrong USB port.

  • Pairing iphone 6 and macbook pro with bluetooth

    I have an iPhone 6 and a new MacBook Pro Retina and cannot pair my device with BlueTooth. I do have handoff working so I know they are communicating.
    Why can't I use blueTooth to move files from one device to another?

    Use airdrop to transfer files. Bluetooth is only for tethering your phone.
    Hope this helps.
    PJRS

  • Projector and MacBook Pro with Mavericks 10.9.1

    My MacBook Pro (13 inches retina display flash memory drive) connects to Sharp Notevision projector but the image projected is a ghastly imitattion of my laptop wallpaper.

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Running Logic Studio on Mac pro G5 AND MacBook Pro with dongle

    Hi..I have been running the latest version of Logic on my Mac G5 for many years now but  also want to run it on my MacBook Pro. I have installed Logic studio from the original disks but the program will not load with or without my emagic dongle. I thought the whole point of the dongle is that you can take your work to different studios as the sole user of the program. What is wrong here?
    Thanks in advance.

    I've just noted that Waveburner will work!

  • FCS 2 and MacBook Pro with 10.8

    I got FCS2 to install on my MBP with Mountain Lion. Only problem is getting the programs to work.
    It was my understanding that they would, as they are universal programs.
    Instead, I'm getting this:
    Process:         Final Cut Pro [14752]
    Path:            /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
    Identifier:      com.apple.FinalCutPro
    Version:         5.1 (5.1)
    Build Info:      FCPApp-602161028~4
    Code Type:       X86 (Native)
    Parent Process:  launchd [150]
    User ID:         501
    Date/Time:       2012-09-02 16:48:23.265 -0500
    OS Version:      Mac OS X 10.8.1 (12B19)
    Report Version:  10
    Sleep/Wake UUID: ********-****-****-****-************
    Interval Since Last Report:          103294 sec
    Crashes Since Last Report:           97
    Per-App Crashes Since Last Report:   2
    Anonymous UUID:                      ********-****-****-****-********
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      Referenced from: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
      Reason: no suitable image found.  Did find:
              /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit: mach-o, but wrong architecture
    If anyone has an idea of how to resolve this, preferrably without spending money, please bring them forth.

    >Version:         5.1 (5.1)
    You are trying to install FCS 1.5 not 2. That software is 6 years old and the installer is PowerPC.
    You might get it working by installing Rosetta from a Mac OS X 10.6 retail disc first.

  • Can the new Macbook Air and Macbook Pro with retina display that run OS X Lion or Mountain Lion run Windows through bootcamp?

    I was just wondering.. since the new macs have omitted the optical disk drives is it still possible to install windows on a mac running OSX Lion and Mountain Lion?

    Yes. Read the Boot Camp Install instructions for the MacBook Air which also does not have an optical drive. Put Windows onto a thumb drive or external optical drive and make these bootable. Then follow the instructions for installation from the thumb drive or external optical drive.
    http://www.apple.com/support/bootcamp/

  • LR 4 and Macbook Pro with retina display

    Will LR4 (latest) version run with the above hardware? I want to purchase LR4 but am not sure how it will work with the macbook. It is not mentioned in the FAQ as far as I can see.
    Thanks in advance

    Sure. LR 4.3 even specifically adds Retina support...
    Mylenium

  • Illustrator CS5 and Macbook Pro with Retina Display

    Anyone have any word on the compatibility here? As a freelancer, Illustrator CS5 is one of my main tools. I've heard there'll be an update to Photoshop, but haven't heard anything about Illustrator.
    Thanks

    I hope they update CS5 because things look pretty terrible if you ask me. Everything renders all pixely and it's dang near impossible to tell if your images look sharp or not. Essentially, everything is pixelated no matter how sharp the image is when you open it.
    Retina looks like it is going to make designing for the web a nightmare. When you deal in pixels and can actually distingish pixel increments by sight on the screen, a display like this is proving to be quite counterproductive. For print and vector based graphics, etc, I think it will be a much different situation, the graphics don't look that bad in CS5 on a retina display. You can see pixelization around edges but gradients are smooth at least and the blacks are incredible.
    This is going to make web design a royal pain though.

  • Virtual PC v7.0.2 and macbook pro with intel cpu

    Is Microsoft Virtual PC v7.0.2 compatibble with intel cpu's?
    thanks

    Virtual PC for Mac will only work for the older PowerPC Macs.
    For the newer Intel Macs look at either Boot Camp from Apple <http://www.apple.com/bootcamp> or Parallels <http://www.parallels.com>. The performance of Windows with either of these solutions far outweighs Virtual PC.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

  • I have only loaded phone contacts in my new iPhone 5 and my email contacts only on my Macbook Pro with retina display contacts how can I keep them from changing my iPhone to email contacts only when I connect to iTunes please

    Since purchasing a new iPhone 5 and macbook pro with retina display I have decided to keep the iPhone 5 for phone contacts only, and the macbook for email contacts only .. Is there a way for me to keep these as they are recorded on each apple product when I sync with iTunes as it has changed my iPhone and put in email contacts and thus deleted iPhone phone contacts once when I syncd thanks appreciate any help

    To prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
    Plug it in, then on the iPhone sync summary screen, click "info" along the top.
    Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
    Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them

Maybe you are looking for

  • Error on HP 5610 message

    Error on HP 5610: 0xd05d010d, Reset Power how?

  • Xmonad and Xmobar: avoidStruts no longer exposes Xmobar

    I've been using Xmonad with the same config for months now. I reinstalled Arch recently, and ever since then avoidStruts no longer keeps Xmobar from being hidden behind windows. I have installed the xmonad and xmonad-contrib packages; my config compi

  • Oracle 10g logon to database

    Today was my first introduction to Oracle ever. I've installed Oracle Enterprise but my problem is that I do not know how to change the database I'm working on. I'm using OEM http://carlo003.xyz.local:5500/em/ to administer the databases but when I l

  • Aperture 3.0.2 always importing

    Since I updated to Aperture 3.0.2, the spinning "importing" indicator always show, even when I'm not importing anything. I opened the Activity Window to see what was going on, but it's blank. Anyone know what's going on and how to fix it? And, sadly,

  • OSB and JCA and AQ adapter

    Hi, Database 10.2 OSB 10.1.3.1 I would like to automaticlly publish changes from databasae AQ to service in OSB. Is it possible to do it by creating JCA AQ adapter (deploy it t OSB as business/proxy process) that could listen/dequeue database AQ and