Motion 5.0.2 won't export, need help

Hey everybody, so i am having this problem that when i hit export or i use command+E nothing happens, a window should scroll down with all the options and stuf, but instead nothing happens, i have a video explaining my problem better: http://www.youtube.com/watch?v=mVYio9N-nUg&feature=youtu.be
If anyone knows why and how this happens, PLEASE say something

For starters, Make sure you are using the latest version of Motion (5.1). Your title and profile say you are using 5.0.2, which is a few years. Next, do you use any program like MacKeeper? MacKeeper has been known to cause problems with share.

Similar Messages

Exporting from Motion as MPEG 2 - won't happen - please help!

I have a 3 minute Motion sequence that I can't export in Compressor - it takes over 5 hours to get halfway through the process. It looks as though Compressor has crashed, it goes so slow.
Basically I need to make a DVD in DVDSP, urgently. I exported as an H264 Quicktime, which was a breeze, but that comes up as incompatible format when I import this asset into DVDSP.
What to do? Another CODEC? What MPEG 2 setting might work in Compressor?

Urgent?
Your workflow is way out of whack, there's no need to over-resolve your output format which is SD MPGE2. You can export out of Motion using any codec that doesn't create a file with larger specifications than are necessary, you'd just be wasting all of your time and effort.
You can be working in a Motion project that has the same frame specs as MPEG2 or just plain ol' DV.
You export out of Motion and then put that movie into Compressor to do your MPEG2 but "urgent" is the key term here. Just put the exported Motion movie into DVDSP and let DVDSP do the encode for you, saves a bit of effort, not really any time.
bogiesan

Hard Drive icon missing - Desktop folders won't open - Need Help!

I need help! I have a 400 MHz PowerPC G4 with 768 MB SDRAM, no DVD drive - was running OS X 10.3.9 quite happily. We became owners of a new iPod Nano - so we had to upgrade to 10.4.
(I'm writing this on my 800 MHz PowerPC G4 with 768 MB SDRAM, (also no DVD drive) that I upgraded from OS X 10.3.9 to 10.4.11 without incident.)
Installed 10.4 using a FireWire Hard Drive - installed software updates to 10.4.11 - ran Disk Utility - ran MacJanitor - ran DoktorKleaner - everything was working well.
Rebooted and the Hard Drive Icon had disappeared from desktop. Folders on desktop have all lumped together in the top right hand corner of the screen, and refuse to open.
Only programs in the dock still work - clicking on the Finder icon only gives the option to hide. New Finder Window does not work. Programs can be found in Spotlight, but if they're not in the dock they won't open. Trash won't open or empty.
I attempted to reinstall Mac OS X using FireWire, but now the Hard Drive is full and is telling me it will erase and reinstall. I need to save files off this computer now (Sadly no backup exists) before my wife readies divorce papers.
I tried using FireWire Target Disk Mode to copy files - with the 400MHz as Target I just get a spinning Beach Ball any time I click on the Icon. After far too long it opened up an empty window.
With the 800MHz as the target, the 400MHz does not show it on the desktop, so I have no way of copying files to it.
Anyone have some advice that doesn't involve a time machine?

Whenever something starts going wrong with the computer I suggest you first boot from the installer disk, select language if applicable, choose utilities, run Disk Utility and verify (and repair if necessary) the drive. Then repair the permissions on your computer. You can also repair permissions from DU on your main drive while booted, but to properly verify and repair your drive you have to run it from a drive other than the boot drive.
[Resolve startup issues and perform disk maintenance with Disk Utility and fsck|http://docs.info.apple.com/article.html?artnum=106214]
[Using Disk Utility in Mac OS X 10.4.3 or later|http://docs.info.apple.com/article.html?artnum=302672]
[Disk Utility's Repair Disk Permissions|http://docs.info.apple.com/article.html?artnum=25751]
From BDaqua (couldn't have said it better):
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Then Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes."
A few questions:
Was this a retail installer disc that you used to do the upgrade?
How much free space do you have on the computer?
Did you use the [PPC Combo updater|http://www.apple.com/support/downloads/macosx10411comboupdateppc.html] to get to 10.4.11?
Did you do all these updates in one single session or restart and check your computer had accepted them okay between each update? It is critical to repair permissions before and after each update otherwise the installers won't install fully and you end up with a mix of versions.
You can set the Finder Preferences, general, to display a hard drive icon, but it sounds like your problems are going beyond that?
You can also try trashing your Users -> home folder -> Library -> Preferences -> com.apple.finder.plist file and see if that clears up the issue. That sets the Finder preferences and if it gets corrupted it will cause Finder problems.

Exchange Active Sync won't work need help

I have been reading a few dozen of these post that people are having issues with there iphone sync with exchange. I am TOO!.
For some i can get into owa and from the iphone safaria.
The iphone was able verfy the ssl certificate, but nothing is syncing with mail server
My network infrastructure.
1. Clustered mail server . Running exchange server 2003.
2. firewall- port 443 has been verified to be open and able to acces owa from iphone safari
3. I have NO isa setup in my network.
4. Called SSL verisign company and everything checked out to be fine.
5. virtual folders have been verified to be correct.
6. checked dns report no errors.
7. AD exchange feature mobile services and protcols was verfied to all on.
8. turned off wifi
9. checked all creditals.
And it just won't push anything. I have come to the conclusion that is either IIS or Iphone is using a multiply protocol ports to access the exchange. But i don't know i need HELP
Simple troubleshooting steps to start with:
1. Check your version of Exchange. Must be at least 2003 w/SP2.
2. Check your security certificate. If you go to your "https://webmail.yourdomain.com/owa" or "https://webmail.yourdomain.com/exchange" and receive a certificate error, you may want to look into an external certificate from a recognized CA. I used SBS through my registrar.
3. Check to ensure your "Front-End" and "Back-End" server are not both requiring SSL. That will cause issues with OMA.

You don't want to check OWA (Outlook Web Access) as it is a full mail client for a notebook or desktop.
The iPhone uses ActiveSync OMA for syncing. Thus, you want to check https://www.domain.com/OMA (where www.domain.com is the URL to the Exchange server - same URL as the OWA url) with a notebook or desktop. The "s" in https is needed at OMA requires SSL.
You should see a login prompt for username and password followed by a list of Inbox messages. If you don't, the server is not correctly configured for OMA.
Once OMA works from a desktop or notebook, it is an easy procedure to add an Exchange account to a phone. Just follow the iPhone on screen examples and provide only the path to the Exchange server and not the "/Exchange" following.
This information can be found on many threads in this forum using the Search feature.

IMac G5 won't bootup, need help, Cap't J is in trouble!

Alright, Cap't J is in trouble, needs a commander.
My iMac G5 won't bootup.
I can hear the fans loud.
need help please!

Have you tried http://support.apple.com/kb/TS2094 ?
Also, before going to step 5 and taking a screwdriver to it, try:
Powering up with Option held down
Booting from an install DVD with C or Option held down
Booting from an install DVD into Apple Hardware Test by holding D down

Updated to Mavericks now my Toshiba External HDD 3.0 won't mount need help what to do

I recently updated to mavericks now my toshiba external hard drive wont connect and i have some important data need help to get drivers im assuming its the drivers but need help to locate the drivers

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

Import/export--need help gurus!!!!!!

C:\DOCUME~1\ADMINI~1>set oracle_sid=orcl
C:\DOCUME~1\ADMINI~1>expdp scott/tiger directory=orcl_exp_datapump schemas=scott
Export: Release 10.2.0.1.0 - Production on Tuesday, 12 February, 2008 19:35:34
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Starting "SCOTT"."SYS_EXPORT_SCHEMA_01": scott/******** directory=orcl_exp_datapump schemas=scott
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 32.62 MB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
. . exported "SCOTT"."SYS_EXPORT_FULL_02" 7.628 MB 12224 rows
. . exported "SCOTT"."SYS_EXPORT_FULL_03" 7.670 MB 12231 rows
. . exported "SCOTT"."SYS_EXPORT_FULL_01" 7.080 MB 9573 rows
. . exported "SCOTT"."SYS_EXPORT_TABLESPACE_01" 255.8 KB 318 rows
. . exported "SCOTT"."DEPT" 5.656 KB 4 rows
. . exported "SCOTT"."EMP" 7.820 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.585 KB 5 rows
. . exported "SCOTT"."TESTDEPT" 5.726 KB 7 rows
. . exported "SCOTT"."BONUS" 0 KB 0 rows
Master table "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SCOTT.SYS_EXPORT_SCHEMA_01 is:
C:\ORCL_EXP_DATAPUMP\EXPDAT.DMP
Job "SCOTT"."SYS_EXPORT_SCHEMA_01" successfully completed at 19:37:35
C:\DOCUME~1\ADMINI~1>impdp abc/abc directory=orcl_exp_datapump dumpfile=expdat.dmp remap_schema=scott:abc
Import: Release 10.2.0.1.0 - Production on Tuesday, 12 February, 2008 19:43:48
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORA-31626: job does not exist
ORA-31633: unable to create master table "ABC.SYS_IMPORT_FULL_05"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 863
ORA-01031: insufficient privileges
Any advise is appreciated!
trying to import from scott schema to abc schema....but unsuccessful.
DBA creates directory
grants permission on the directory to scott and abc schemas
exports scott schema (userid/password.....scott/tiger)
imports to abc schema(userid/password....abc/abc)
is this the right way?
i need some assistance guys!!!!!!
Message was edited by:
oracle novice
Message was edited by:
oracle novice

Please check the following minimum requirements are met;
-CREATE SESSION
-CREATE TABLE
-object privileges READ and WRITE on the directory
-sufficient tablespace quota on default user's tablespace
Additionally the role IMP_FULL_DATABASE is needed:
-to run an Import DataPump job that imports a different schema.
These requirements apply to the user connected to the database while preforming Import Datapump Job.
Additionally review Oracle Metalink Document: Export/Import DataPump: The Minimum Requirements to Use Export DataPump and Import DataPump (System Privileges Doc ID: Note:351598.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:5033277956381036007::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,351598.1,1,1,1,helvetica
Adith

Usb 1.0 won't work - need help urgently

Happy holidays and hope Santa is working overtime
Got iPod nano for my son and mrs. and can't get them to work properly. Long time mac users, G3 iBook at home (mac 10.3.9), g4 iMac at office but neither have usb 2.0 as older machinese.
For some reason, even after downloading 7.5 iTunes, when we connect new nano with usb connector supplied in box, only get that apple icon popping up; can't connect for some reason, can't see nano on desktop.
Tried it with old Sony Vaio, running WinXP but a gain older model, no usb 2 and only usb 1 ports. Can't read there either.
Funny, when I plug with my old 3rd gen iPod charger, using firewire with common plug, it's charging fine.
Can someone explain if it's the usb port that's a problem? Mrs. leaving to visit mother for few weeks early tomorrow morning and I have appointment with genius bar at 10 am - but too late to help her.

Yep, on my iBook, got message finally that needed 10.4.8.
Re-tried with WinXp (not sure if SP2) and got it connected, trying to rip some CD to sync and completed about 5 cd. After ejecting nano, couldn't get it to 'turn-on' which is weird - so i'm leaving it connected to pc to charge (instructions say 3 hrs).
My suspicion is this is a lemon.
Btw, can i charge this generation nano with the 'traditional' firewire charger that came with my old iPod (3rd gen)? If we do get it to work, my wife won't have pc to charge with when traveling and I'd like to give her my charger to take along?
Thanks,

Husband's iphone won't ring. need help please. thanks

My husband's iPhone 4 won't ring. It will vibrate but ringing has stopped. Can't figure out how to change back to ringing. Thanks for any help.

check on the left hand side, above the volume, there is a global mute switch, see if that is off

button element won't submit, need help...

This <button> element is used all throughout our site
http://www.ocp.org flawlessly.
However, on the particular page I'm working on right now it won't
work in conjunction with the drop down menu I'm working with in IE
6 or 7, can anyone help me out? Thanks!
I'm working in a private network so I can't show you a live
version of this page but I've attached the code.

<button
onclick='window.location.href='/account/orderHistory''
type="submit">
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Spencer Hill" <[email protected]> wrote in
message
news:[email protected]...
> This <button> element is used all throughout our
site
http://www.ocp.org
> flawlessly. However, on the particular page I'm working
on right now it
> won't
> work in conjunction with the drop down menu I'm working
with in IE 6 or 7,
> can
> anyone help me out? Thanks!
>
> I'm working in a private network so I can't show you a
live version of
> this
> page but I've attached the code.
>
> <form id="userdata" name="userdata" method="post"
> action="/account/orderHistory">
> <table cellpadding="0" cellspacing="0">
> <tr>
> <?php
> if (isset($accounts)) {
> $num_accounts = sizeof($accounts);
> if ($num_accounts >= '2') {
> echo "<select name=cust_id>";
> foreach ($accounts as $cmid => $value) {
> $name = $value['organization'];
> if ($name == '') {
> $name = $value['name'];
> }
> if ($cmid == $cust_id) {
> echo "<option value='" . $cmid . "' selected>" .
$name . ' (#' . $cmid .
> ")</option>";
> } else {
> echo "<option value='" . $cmid . "'>" . $name . '
(#' . $cmid .
> ")</option>";
> }
> }
> echo "</select><button
>
onclick='window.location.href='/account/orderHistory''>submit</button></tr>";
> }
> else {
> foreach ($accounts as $cmid => $value) {
> $name = $value['organization'];
> if ($name == '') {
> $name = $value['name'];
> }
> }
> echo $name;
> echo "</td></tr>";
> echo "<input type=hidden name='cust_id' value='" .
$cmid . "'>";
> }
> }
> ?>
>
> 
> </table>
>
> <input type=hidden name=action value=history>
>
> </form>
>
> <form id="userdata2" name="userdata2" method="post"
> action="/account/orderHistory">
> <table class="results" cellpadding="0"
cellspacing="0">
> <tr style="text-decoration: none; font-size: 14px;
color: #fff;
> background-image:
url(/ocpimages/tabs/tabs_dscrptn_bg.gif); font-weight:
> bold;">
> <td style="border-right: solid 1px #999;
padding-right: 0;">Date</td>
> <td style="border-left: 1px solid #ccc; border-right:
solid 1px #999;
> padding-right: 0;">Invoice No.</td>
> <td style="border-left: 1px solid #ccc; border-right:
solid 1px #999;
> padding-right: 0;">Status</td>
> <td style="border-left: 1px solid #ccc; border-right:
solid 1px #999;
> padding-right: 0;">Ship Date</td>
> <td style="border-left: 1px solid #ccc; border-right:
solid 1px #999;
> padding-right: 0;">Tracking</td>
> <td style="border-left: 1px solid #ccc; border-right:
solid 1px #999;
> padding-right: 0;">Details</td>
> <td style="border-left: 1px solid #ccc;
padding-right: 0;">Amount</td>
> </tr>
>
> <?php
> if (isset($orders)) {
> $td_class = 'white';
> foreach ($orders as $i => $value) {
> $entry_date = $value['entry_date'];
> $invoiceID = $value['invoiceID'];
> $order_amt = $value['order_amt'];
> $status = $value['status'];
> $ship_date = $value['ship_date'];
> $tracking_id = $value['tracking_id'];
> $tracking_id = explode('|', $tracking_id);
>
> switch ($status) {
> case ('RTP'):
> $status_desc = "Shipped";
> break;
> case ('RTI'):
> $status_desc = "Shipped";
> break;
> case ('O'):
> $status_desc = "Order Submitted";
> break;
> default:
> $status_desc = "Order Picked";
> }
> if ($invoiceID != '') {
> echo "<tr valign='top' class=' . $td_class . '>";
> echo "<td>". $entry_date. "</td>";
> echo "<td style='text-align: center;'>" .
$invoiceID . "</td>";
> echo "<td>" . $status_desc . "</td>";
> echo "<td>" . $ship_date . "</td>";
> if ($tracking_id != '') {
> $suburl = '';
> foreach ($tracking_id as $key => $val) {
> $track_cnt = $key + 1;
> $suburl = $suburl . "&InquiryNumber" . $track_cnt .
"=" . $val;
> }
> $suburl =
> "
http://wwwapps.ups.com/etracking/tracking.cgi?tracknums_displayed="
> $track_cnt .
"&TypeOfInquiryNumber=T&HTMLVersion=4.0" . $suburl .
> "&track=Track";
> echo '<td><a target="_new" href="' . $suburl .
'">Tracking
> Detail</a></td>';
> } else {
> echo "<td> </td>";
> }
>
> $suburl =
"/account/orderHistory?action=detail&invoiceID=" . $invoiceID .
> "&cust_id=" . $cust_id;
> echo '<td><a href="' . $suburl . '">Product
Detail</a></td>';
> echo "<td style='text-align: right;'>$ " .
$order_amt . "</td>";
> echo "</tr>";
>
> $td_class = $td_class == 'white' ? 'blue' : 'white';
> }
> }
> }
> ?>
> </table>
> </form>
>

"add printer" utility won't work, need help

I have an IMac “Lamp”. After I upgraded to 10.4.7 the ‘add printer’ utility will not work and so no printer is available.
I had an older HP printer and one fellow at HP said that the problem was with the printer. I bought a new HP Photosmart 8250, installed the software and the same problem exists. The computer can see the printer and recognize it specifically as being plugged into the port but the ‘add printer ‘ utility still doesn’t work.
A nice Canadian lady who works for HP spent well over an hour on the phone with me guiding me through quite a few moves dumping various files but to no avail.
Does anyone have any ideas?

Hi..
I have a Poer Book G$ )S X 10.4.5. I am having the same problem with my printer utility....won't add printer. I am trying to install a new printer, HP 2575, all-in-one. With the instruction of HP support, I downloaded the latest driver, uninstalled all my other printers, re installed the HP 2575, threw out many files, etc., all with no success. My husband was able to install the printer on his PC (windows)...so it is a MAC problem. Now, there is nothing in my library/printer folder. My system does not list any printers either. When I plug the printer into my MAc with the UBS cable, it shows on the list of printers, but I can't add.
Someone please help if you can.
Beverly

Firefox works fine on version 26. When it updates to version 27, i get undefined entity. I've tried getting profile manager to run and it won't. Need help

Version 26 works fine. When it updates to version 27.01, I get undefined entity. I've tried uninstalling and then reinstalling. I've tried to bring up profile manager but it doesn't come up. I've tried deleting Firefox folders. I'm very disappointed that Firefox rolls out an update that causes problems. None of your recommendations is working and I really hate to lose Firefox but this is pathetic. I'm using version 26 as much as i can till someone gives me the right solution. Is there a simple link to click on that will clear up any old profiles and simply fix this issue?

That means you need to clean reinstall.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
Please report back to see if this helped you!
Thank you.

9.2.0 OCCI's setString Won't Work, Need Help w Thks

Start exploring occi.h (oracle version 9.2.0) but hit a problem w no clue to solve it.
#include <iostream>
#include <occi.h>
using namespace oracle::occi;
using namespace std;
int main()
// declare Environment, Connection, ResultSet, Statement
env=Environment::createEnvironment(Environment::DEFAULT);
con=env->createConnection("myname", "mypws", "myConString");
stmt=con->createStatement("select * from aTable where aFld=:1 and bFld=:2");
stmt->setInt(1, 10);
stmt->setString(2, "myValue");
rs=stmt->executeQuery();
rs->next();
// cout result, all fields empty, seems a result not found
stmt=con->createStatement("select * from aTable where aFld=10 and bFld='myValue'");
rs=stmt->executeQuery();
rs->next();
// cout result, got the record and print expected result.
// close connection on env, rs, stmt, con
the diff. between 1st & 2nd SQL stmt is one is parameterize and the other is not. If in 1st SQL stmt, I hard code :2 to 'myValue' and then execute setInt() only, it works as well. So it is the 'setString()' function that won't work.
Any idea?
You help is really appreciated.
Thanks
Message was edited by: chris
user459175

Hi Nikeda
The bFld is in char(10).
You are correct, so when I change the sql stmt to "select * from aTable where aFld=:1 and trim(bFld)=:2", it works. Or when I change "myValue" to "myValue<+ 3 space", it works as well.
Thanks

Hp laserjet 1012 won't print - need help

Nothing in spooler. Spooler cleared. Can't print.

My hp laserjet 1012 was printing very well for the last two years. Three days back, in the print I suddenly saw a big blank streak indicating that the printer cartridge may be exhausted. After that, it is not printing anymore on print command. Yellow light has been flashing all the time.So I went out and bought the printer cartridge recommended, namely, Q 2612A. I have put it in. Still it appears not to have gotten back to the green print mode.
Any comments/suggestions? Everything looks okay otherwise.

WON'T REBOOT - NEED HELP!

Well I was experiencing some major issues, as in my Powerbook would not let me boot from an External HDD when my iBook could boot from it with no problem.
My Powerbook would not allow me to boot from a CD either but it could boot from the internal harddrive. I decided to boot up my Powerbook in FW Target Mode and reinstall OSX from the iBook.
I booted the iBook from a partition on the external that was a Restore of the DVD and sucessfully installed OSX on the Powerbook's internal HDD.
I was also able to keep the Powerbook in FW Target Mode and boot it from the iBook.
When I go to boot the Powerbook stand-alone with the Internal HDD, it sometimes gets stuck on the Grey Screen and the status indicator will freeze, other times it will get to the blue screen w/o showing the Mac OSX Loading Bar, other times it has Show the entire progress bar of Loading OSX and even went as far to allow the Dock to pop halfway up. The mouse is frozen everytime it gets to the blue screen.
I have reset PRAM, NVRAM, PMU, etc. I have 2GB of aftermarket RAM installed and took turns swapping out one stick, then the other with not change in results. I no longer have the Apple Factory 512MB stick.
I've ran fsck from Single User mode and the disk appears ok.
I've followed everything from : http://docs.info.apple.com/article.html?artnum=106464 with no avail.
I'm really desperate now. I have absolutely no clue what the deal is here.
PLEASE PLEASE, any suggestions would be great.
And does anyone know how I would return the Powerbook without the factory RAM?
Thanks,
Russ

Well it turns out that my Powerbook will NOT boot from a Retail OSX DVD but instead from the Restore Discs only.
Weird, but it's now been solved.

Motion 5.0.2 won't export, need help

Similar Messages

Maybe you are looking for