Motion 5.1 Go to Selection In Point does not move playhead correctly

Hello,
anyone seen strange playhead locations using 'selection in/out point' when opening motion projects created with 5.0.. ?
Kenneth

i checked a few smaller projects and dont see the same issue.
For the project with the issue - check the playhead - layer group selected (the layer group is a sub-group of a group with a large number of groups ~ 15-20 groups with 5-10 objects per group'ish .. ).
go to selected in point
go to selected out point
Strange... ps. i deleted my motion preferences in the ~Library/Preferences wo luck.

Similar Messages

Mouse pointer does not move between monitors

my mouse pointer does not move between displays all of a sudden !

ok, I am using magic mouse, mac mini with two displays,
was working fine, but now when I started the computer recently it does not want to move the mouse to the other screen.
the other screen is open but it is not possible to move anything over to it !!
tried to restart reset the display settings etc. but no luck !!

Pointer does not move to the default button in the dialog box

example: when cleaning out trash the pointer does not go to the default button in the dialog box, you have to manually go there.
This happens all the time.

Hi Abhishek,
In SAP this job shows completed till the 3rd step. and no error in the job log. but it does not execute the 4th and the 5th steps. And in Redwood, it shows completed for 1st and 2nd steps, 3rd step is in Error but has no error log. The 4th and 5th steps are in chained status. I have not amended the job chain after import. I have just scheduled it as it was running in the SAP system.
Let me know if you need some further information on this.
Regards
madhu

"The selected communication device does not exist"

Whenever I log on (or come out of sleeping), I get a prompt box from Internet Connnect that says "The selected communication device does not exist. Please verify your setting and try again". I think this started to happen when I stopped using a USB modem to access the internet. Recently I was again using a (different) USB modem, and when I stopped (I now have a wireless router), I now get TWO of the above alerts!
To be clear - I have no problem accessing and using the internet with the wirelss router I am using.
Is there a way of deleting historical communication devices I no longer use from Internet Connect that might stop this from happening?
Thanks in advance.
G4 iBook Mac OS X (10.4.8)

Hello Dunstan,
I wonder if this might have something to do with Location and Network settings.
I'd go to System Preferences/Network and, choosing the location that you are using, select the "modem" tab. On the presumption that, because you are now using wireless router and that your computer is no longer using its built-in modem, I'd delete all settings under "modem".
Then I'd open Internet Connect and see what crops up when you click on the Modem tab. It should be blank. If it is not, I'd close Intertet Connect, then go to My User Folder/Library/Preferences, and there move the following file to the Desktop: com.apple.internetconnect.plist. Open Internet Connect again.
There are other things that can be done, especially in the Locations settings. However, I'd try the above first.
Best of luck,
Martin
If you found that this contribution helped to answer your question, please consider the "Helpful" and "Solved" buttons in this message. Why reward points?
Powerbook 15-inch G4 1GHz Mac OS X (10.4.8) Several veterans that go on and on. 40gig, 3rd generation iPod

The selected context node does not have attributes - Message no. SWDP_WB_TO

Hello,
I am trying out the example in web dynpro documentation -> Creating a Simple Flight Info Application
and in part 3 steps 11 - 13 I get the following error
The selected context node does not have attributes
and the associated message class and # is :
Message no. SWDP_WB_TOOL467
can anyone please help ?

Hi Raj,
Have you done the steps 7 and 8 as described
7. Create an additional node called u201CflightSu201D, this time with the cardinality 0..n.
8. Use the Create Using Wizard option of the context node again to define attributes from the SFLIGHT structure for this new node (see part 1, step 15). Choose the following fields: CARRID, CONNID, FLDATE, PRICE and PLANETYPE.
See the flights node , if there are no attributes the perform the steps as described in 8.

The selected Flex SDK does not support building mobile projects

I am unable to create a new Actionscript Mobile project. The new project dialogue gives the error: "The selected Flex SDK does not support building mobile projects." I tried seting the default Flec SDK both to the SDK included with Flash Builder 4.7, and also to a version of the 4.6.0 SDK (build 23201) with AIR 3.3 SDK overlayed on it, which already existed on my computer. Both resulted in the same error. Any ideas?

Hi ,
Actionscript Mobile projects use AIR SDK by default in Flash Builder 4.7 . Flex SDK won't be used for Actionscript projects.
Could you please try creating an Actionscript project in fresh workspace and let me know if the issue still exists.
Also attach screenshot and error log if any.
Thanks,
Sanjay

Hi, I want to purchase the complete creative cloud at S$60 , however, in my account, at the payment page, it's appear RM currency and the selection of country does not include singapore. How am I suppose to purchase?

Hi, I want to purchase the complete creative cloud at S$60 , however, in my account, at the payment page, it's appear RM currency and the selection of country does not include singapore. How am I suppose to purchase?

Hi there,
The country selected while creating the Adobe account was selected as Malaysia, so you get to see the price in RM.
^Ani

Google removed from bookmarks and when selecting safari it does not automatically open to bookmarks as previously did

google removed from bookmarks and when selecting safari it does not automatically open to bookmarks as previously did

When Safari launches, tap in the address field (the one on the left) and type "www.google.com" then hit the "Go" button.
After the page finishes loading, hit the "Action" button (the middle button on the bottom button bar that looks like an arrow coming out of a rectangle) and select "Add to Bookmarks" to add the Google page to your bookmarks.
After that, you can hit the Bookmarks button (the button that looks like an open book in the bottom button bar) to access the Google bookmark you just created.

The window to select dimensions simply does not appear and I can't move forward, due to variables exit in the report

Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
*      wa2-low = |{ v_year_h }12|.
       IF sy-subrc EQ 0.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
*        wa1-low = wa2-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
    WHEN 'ZREDT2'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
       IF sy-subrc EQ 0.
*        wa2-low = |{ v_year_h }12|.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André Oliveira

I solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira

Measuring point does not exist

Hi,
I am facing problem in pi sheet where in co54 while sending the process msg i am getting the error
"Measuring point does not exist"
"Destination YI16 COCI_MEASUREMENT_DOC_CREATE cannot process the message"
"Message is not sent to any destination"
Can any body help....
Rajsekhar

Hello
Check the link below for the info you can gather using the Container Variables.
Creating Alert Categories
http://help.sap.com/saphelp_nw70/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Regards
Mark

DNS: The selected log file does not exist

Hi to all,
I am using Lion Server on a Mac Mini and everything seems to work fine. However, when I want to check my DNS log file (Server Admin > DNS > Log) I get a message that "The selected log file does not exist"! Stopping and starting the DNS service doesn't help. Anyone any idee how to view the log file within the Server Admin app?
Thanks in advance!
Ewald.

hi John!
if you have time, patience, and squared balls (just for laugh! ):
Use "strace" to trace all system calls a binary make... System calls like "open" file and "close" file =)
That's say, we are going to "trace the files opened by specific application".
"Strace" in MacOSX comes with Developer Tools, so you'll need to install these to continue.
First you have to know which are the Applications in the game, because "Server Admin" is a client-server application, there will be a client application in the client machine, and a server application running in the server.
You have to trace the server application running in the server. It will be the one which opens the log file, and sends the data to the client application.
I've made some previous investigation about the Server Admin Log parser (see https://discussions.apple.com/thread/3352647?start=0&tstart=0).
Also will be helpfull to read a little bit about strace ( http://linux.die.net/man/1/strace )
Here i do my bet, maybe that command line is what you look for:
#sudo strace launchctl load -w /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist | grep "open"
sudo: do as super user
strace: trace the binary
launchctl: system service
load -w file: load, as defined in this file
| grep open: and substract just the "open file" traces
Let me know if that gives you more clues!
regards, T

UD - Selected set code does not exist

Dear All,
We have create material in 0001 plant. It is consumable material and QA is not required. But by mistake Inspection flag was activited in material master.
Now material received is in QA Stock. We have created inspection plan and not inspection lot is in REL status.
During UD system shows following message :
"Selected set code does not exist, or data entered is incomplete"
Is there any way to take stock in unrestricted without doing any QA activity ?
Thanks and Regards,
Nirav

Hi,
Why don't you simply complete the Stock posting using 'Inspection lot stock' tab in QA32?
If you only need to take the stock out of QI and doesn't need Usage decision then why do bother about it.
Besides, this error comes when the UD selected set defined in Configuration is not maintained for the Plant.
To check this, Follow this path,
QCC0> Quality inspection> Maintain inspection type. Select the Relative inspection type and see what is maintained.
Once you maintain this Selected set for the plant 0001 using QS51, you won't get this error. Other way, define that selected set in the configuration which is already maintained for the plant.
ntn

How to save passwords. Setting already selected but still does not save.

How to save passwords. Setting already selected but still does not save. Web site does allow password saving.

Could you try a fake username and password on another site, and see if you can save there? You can use this website's login form at [https://support.mozilla.com/tiki-login.php] to test.
Let me know the result of doing this, and whether any password-related errors appear in Tools->Error Console

VB6 NI-USB-9237 DAQmxCreateAIVoltageChan selected physical channel does not support the measurement type required

I have a VB6 program with code that properly reads analog inputs from an NI-USB-6008.
I tried to re-use the code for a strain-gage module NI-USB-9237, but at the DAQmxCreateAIVoltageChan step I get the following error:
"Measurements: Selected physical channel does not support the measurement type required by the virtual channel you are creating.
Create a channel of a measurement type that is supported by the physical channel, or select a physical channel that supports the measurement type."
Should I be calling a function other than DAQmxCreateAIVoltageChan?
If so, what is it, or where can I find the reference for such functions?
Or - if that is the right function, should I pass different arguments? Currently I'm calling:
DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default, -10, 10, DAQmx_Val_VoltageUnits1_Volts, "")
Thanks in advance for your help
-Chris Hardy
Solved!
Go to Solution.

I figured it out from 372251a.PDF
First, the correct function is DAQmxCreateAIVoltageChanWithExcit
Second, you can't just ask for one sample on one channel - ask for 2 samples instead.
-Chris Hardy

When the video OPTION for MUSIC is selected - The Music Video does not move

For a Movie, when the MUSIC option is selected, it does not move into the MUSIC library. It stays in the MOVIE category. It should to become a music video. How should it be done correctly?

Thanks

Motion 5.1 Go to Selection In Point does not move playhead correctly

Similar Messages

Maybe you are looking for