Motion 5 and Compressor 3?
I have Compressor 3.5.3 (from Final Cut Studio 2) and have recently purchased Motion 5. Prior to Motion 5 I was using Motion 4 and have installed 5 in the way described in these forums to maintain it alongside 4. This means I still have the 'old' versions of all the Final Cut Studio applications.
Within Motion 5, the 'send to Compressor' option just points me to the App Store. Is there a setting somewhere that will allow me to send it to 3.5.3 or is it totally incompatible? (I know I could output from Motion and then re-render in Compressor, but I don't really want the double render.).
Thanks if anyone can help.
David
Hi
Export you Project with the Apple Prores 4444 codec, it'll be just fine.
So you'll obtain a best quality quicktime file compatible with compressor 3.5.3
Olivier
Similar Messages
-
"Motion and Compressor Will Not Open Because Of A Problem"?
Last week I installed FCS 3 on my iMac and everything appeared to work OK.
However, as my iMac had been cluttered with rubbish for 2 years I erased the Hard Drive and reinstalled OSX 10.6.3 together with all FCS 3.
I have only used FCP and STP since then but today I discovered that Motion and Compressor "will not open because of a problem".
Here are the reports where it appears that in both cases the "Dyld Error Message", whatever that is, reports that "Library not loaded etc. etc."
Incidentally there are mentions of 14 and 18 crashes since last reports. This is ridiculous as I have only just tried to open them 3 or 4 times in the last 5 minutes . . . . and the computer OS and apps are all freshly installed.
Process: Motion [578]
Path: /Applications/Motion.app/Contents/MacOS/Motion
Identifier: com.apple.motion
Version: ??? (???)
Build Info: Motion-6870000~22
Code Type: X86 (Native)
Parent Process: launchd [98]
Date/Time: 2010-05-21 15:45:02.265 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 148993 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 2
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
Reason: image not found
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown
Process: Compressor [629]
Path: /Applications/Compressor.app/Contents/MacOS/Compressor
Identifier: com.apple.compressor.Compressor
Version: ??? (???)
Build Info: Compressor-3015328~22
Code Type: X86 (Native)
Parent Process: launchd [98]
Date/Time: 2010-05-21 15:52:33.008 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 149440 sec
Crashes Since Last Report: 18
Per-App Crashes Since Last Report: 6
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/StompTypes.frame work/Versions/A/StompTypes
Reason: image not found
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, UnknownAs I was installing Motion from a backup disk image, I thought maybe the .dmg was corrupt, so after deleting again I put the original DVD in and reinstalled.
However, it still won't open and the crash report seems a little different:-
Process: Motion [783]
Path: /Applications/Motion.app/Contents/MacOS/Motion
Identifier: com.apple.motion
Version: 4.0.0 (687)
Build Info: Motion-6870000~22
Code Type: X86 (Native)
Parent Process: launchd [131]
Date/Time: 2010-05-21 17:44:14.127 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 153737 sec
Crashes Since Last Report: 27
Per-App Interval Since Last Report: 218 sec
Per-App Crashes Since Last Report: 4
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZN14LiSimpleCamera15setDOFDepthModeEi
Referenced from: /Library/Application Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Versions/A/Ozone
Expected in: /Library/Application Support/ProApps/SharedA/Frameworks/Lithium.framework/Versions/A/Lithium
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown -
Motion and Compressor Gone Dead
Following a recent replacement of my internal hardrive - the previous one crashed - Motion and Compressor just wont start. I've tried changing users re-installing, trashing preferences, uninstalling, reintalling to no avail. I get the following log
Date/Time: 2006-12-19 22:20:47.612 +0100
OS Version: 10.4.8 (Build 8L127)
Report Version: 4
Command: Compressor
Path: /Applications/Compressor.app/Contents/MacOS/Compressor
Parent: WindowServer [70]
Version: 2.0.1 (2.0.1)
PID: 473
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/Helium.framework/Versions/A/Helium
Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/Transcoding.fram ework/Versions/A/Transcoding
Reason: image not found
and
Date/Time: 2007-02-01 02:29:53.469 +0100
OS Version: 10.4.8 (Build 8L127)
Report Version: 4
Command: Motion
Path: /Applications/Motion.app/Contents/MacOS/Motion
Parent: WindowServer [11662]
Version: 2.0.1 (2.0.1)
PID: 11753
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/Helium.framework/Versions/A/Helium
Referenced from: /Applications/Motion.app/Contents/MacOS/../Frameworks/Ozone.framework/Versions/ A/Ozone
Reason: image not found
Please help someone out there.
Powerbook G4 17" Mac OS X (10.4.3)Likely you need to reinstall FCS2 but first you could try this:
Here is another way without doing a complete re-install. Pay for and download Pacifist.
1. put your fc studio install dvd in the drive
2. drag the installer icon onto the pacifist icon
3. click "skip" for all the media content
You will see a list of all the install packages on the DVD
4. Select this one: "Contents of MotionGroup"
5. Click the "install" button in the upper left of the window.
6. Only the motion installer will execute and replace all the frameworks, components etc in your library.
The reason that a fresh install does not work, is that the installer assumes an "upgrade" and leaves the original files
in the various library directories alone. These files must be replaced and pacifist will save you about a day's worth of re-installs.
Then there's this:
http://docs.info.apple.com/article.html?artnum=302845 -
Aperture, iPhoto, Mail, FCP X, Motion and Compressor suddenly kaput!
Yesterday I discovered that Aperture and iPhoto, which I hadn't used for several weeks, were refusing to open and throwing up an error message saying there was a "problem and they probably weren't compatible with this version of the operating system etc."
Shortly after, I discovered that Mail and the latest versions of FCP X, Compressor and Motion were also disabled.
After searching the internet/forums it appeared that this problem (with Aperture) could be caused by installing FCE 4, which I had done a week earlier and the only cure was to reinstall the OS.
I deleted FCE 4 and went through all the usual troubleshooting strategies to no avail so I reinstalled OS X 10.8.5 which which took less than an hour and luckily appears to have cured the problem. (I had been dreading reinstalling the OS as I mistakenly assumed it would wipe all the apps and folders off my Mac ......... but of course it didn't.)
So has anyone had a similar experience or can shed any light on this?
Now I have to decide whether I dare reinstall FCE 4 ...........Quite a few bug fixes, like the text position bug in Lion has been fixed.
Here's some from Tim Payton on the COW
- During Playback, zooming the timeline with the keyboard doesn't send you to the end of the timeline
- Scale controls on timeline now update live
- Synchronize Clips now works if you have multiple non overlapping video clips for a single audio clip. (huge!)
- Preroll and Post Roll settings in preferences work.
- HDV Footage with "better performance" doesn't look nearly as bad. Way less flashing.
- Timeline feels much snappier.
- Timeline index now includes sortable columns: name, roles, & notes, and you can edit the values! (huge!)
- Zooming on the timeline now really centers on the playhead if skimming off, skimmer if skimming on
- Inspector updates more consistently to the clip selected.
- Startup is much faster. -
Can I use motion 5 and Compressor with Final Cut Pro 7?
Hi, Guys and Girls:
After reading a lot about the new Final Cut X I decided not to buy it. I´m not gonna say anything about it, pretty much everything has been said so there´s no point in being redundant about it.
So my question is this:
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?
I heard the new version of Motion is nice, not so sure about the new Compressor but any improvement would be nice.
Thanks in advance.
Daniel Sametz.Anyone?
Can I use the new version of Motion and Compressor with the old Final Cut Pro 7? -
Artifacts when rending a simple two minute video from Motion or Compressor
I keep getting artifacts randomly throughout the videos I export, whether i export directly from motion or via compressor, and regardless of which "Share" option I choose or which codec I use (including ProRes - all of them). I've tried literally every preset and even made my own. Its very frustrating because even one artifact messes up the whole video and I have to export it again.
The artifacts show up randomly throughout the videos so its not one particular asset that is a problem. And sometimes it even exports perfectly except that a video at the end (which is admittedly not from a high quality source) shows up SUPER pixelated. This is just as bad.
I've spent the last 48 hours rendering and rerendering the videos. Saving as a new motion file. Clearing cache and library files and pram and restarting. Nothing helps.
This is on top of the fact that I have, in the past, exported properly from compressor (but never from motion for anything more than a few seconds). And I tired this on two computers, one more powerful than the other. One computer is a Macbook Pro w/ core i7, SSD, and 8gb ram. The other was a Macbook air with Core2Duo and 4gb ram. Both of them sucked at exporting the movie. (The air was slower but actually better than the macbook pro.) I'm on the latest mavericks and the latest motion and compressor.
HELP! PLEASE! I dont know what to do!You haven't said if the original video you imported into Motion is MP4 or H.264 or some other highly compressed media. It won't matter what you export if those "damaged" frames are in the original (and mp4/h.264/etc are prone to bad frames at the very beginning and very end depending on how they were prep'd for delivery).
You should (I'd say always, except I'd be a hypocrite) transcode original media into ProRes (any flavor) before importing into Motion. Check frame by frame if you have to to see if there's any damaged frames (usually there won't be.) I'd highly recommend using Quicktime 7 Pro (it's still available from apple's online store at apple.com) to transcode your video. Others might recommend MPEGStreamclip (but I just can't); or if you have it: Compressor.
If you have Final Cut Pro X, you'd be better off editing video in that app. You should be designing your Motion "add-ons" as effects, titles, transitions or generators for use in FCPX and leaving the video completely out of Motion. FCPX also takes care of transcoding to prores for you (opt to Transcode Optimized Media when importing.)
PS - you'll get better performance out of Motion if you use ProRes video. (Same goes for AIFF/WAV audio and NOT mp3.)
Hope this helps... otherwise I don't know what the problem would be. -
Motion 5 and compressor 4 with FCP ?
Hi,
Is it possible to use motion 5 and copressor 4 with FCP 7 ?
Thanks
IvanSort of – by exporting and reimporting as clips. There is no round-tripping. For example, you can't send a clip as a Motion project to Motion4, save and have the clip update in FCP. You'd have to export a clip (or sequence) as a self-contained movie and bring it into Motion (or Compressor), make your changes, exporty and reimport as a clip, see how you liked the result, etc. Much easiier to stay within FCS.
Russ -
Motion. Compressor and FCP
Really pleased that FCP now supports 720/50p but the ProApps 2007/02 update has broken Motion, FCP and Comprossor. In Motion I can't open the Library or File Explorer. In FCP the Motion Master Templates won't let me drop clips into the drop zones, which is exactaly what I've been doing in my present project. I've tried reinstalling and, if I don't upgrade Motion it works, but if I upgrade FCP to 6.0.2 the Motion templates don't work. Compressor just doesn't open.
HELP! I'm in the middle of an edit and northing's working. Can anyone tell me what's going on?Sort of – by exporting and reimporting as clips. There is no round-tripping. For example, you can't send a clip as a Motion project to Motion4, save and have the clip update in FCP. You'd have to export a clip (or sequence) as a self-contained movie and bring it into Motion (or Compressor), make your changes, exporty and reimport as a clip, see how you liked the result, etc. Much easiier to stay within FCS.
Russ -
I finished a video on whale watching, I retimed some of the clips to run slower to reduce boat motion and added a few whale sound effects, when trying to send to media browser or compressor I keep getting Frame 3085 (error-1) please help
Trash your preferences. Trash your project render files. Switch off background rendering. Do not render. Export.
-
Recent Software Update - Recommended for FCP X, Motion 5 and Compressor 4 Users
There is a recent Software Update ("ProApps Quicktime Codecs") that is recommended for the FCP X, Motion 5 and Compressor 4. Should FCP 7/FCS 3 Users download this update as well, or avoid to prevent any conflicts?
I have one boot drive with 10.6.8 and FCS 3, and a 2nd boot drive with 10.9 and the FCP X Trial - best to avoid any problems. Everything is smooth as glass at the moment.
-
Does motion 5 and compressor come with FCPX purchase?
Does motion 5 and compressor come with FCPX purchase? Is there somewhere that you can buy this in a package if so?
NNo. there seoarate applications. You want them? Buy them.
-
Aren't FCPX and Compressor supposed to be able to export Apple ProRes 422 LT? I just bought FCPX and Compressor and there seems to be no way to transcode HDV clips to Apple ProRes422 LT. Before buying these I read an LACUG tutorial by R Taylor that says it can.
Tom is right. Codecs are shared software system-wide ("Core Video"). If you cannot find the option with any software (such as MPEG Streamclip), you won't find it in Compressor or FCPX either. The Quicktime ProRes codecs is part of the FCP menu > "Download Additional Content" you need to make after install FCPX (or Compressor.) These "pro video" codecs are part of all "ProApp" licenses for video related software from Apple (QT7Pro, Motion, Compressor, Final Cut, etc....) [you can also download them here: http://support.apple.com/kb/dl1396]
Most articles/tutorials you read by "long time" users are apt to assume the reader has been working with pro-video on Macs since the days of disk installs (like they have). In those days, the installation of those codecs wasn't even really an option (well, it was if you did a custom install - but who *didn't* install all available codecs??), it was automatically installed with the main software. Since the "App Store" venue... things have changed somewhat. -
Can the 11 inch 128GB macbook air use Motion 5/ Compressor 4?
I really wanna buy Motion 5 and Compressor 4 but Apple is unclear on all the Macbook's Specs
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
Does Qmaster come with Motion? - Compressor does.
Hi,
I've been using Compressor 2 with Motion 2, works great. I want to set up Qmaster but I can't seem to find the AppleQmasterNode.mpkg package. I saw a bunch of other Qmaster packages, and installed them, but I can't get the control panel to show up in my system prefs, which would confirm I've done the setup correctly.
Advice would be appreciated.
JohnThat I'm aware of Motion doesn't doesn't come with Qmaster in that sense. However, if you have if you have Final Cut, it will come with Qmaster which you can then set up and compressor will use Qmaster. But if it doesn't show up in your system preferences then it wasn't installed and you would need to purchase Final Cut.
-
Is there a way to run Motion and Final Cut Pro on Separate Machines?
Is there a way to run Motion and Final Cut Pro from the same Final Cut Studio license on separate machines? We hadn't realised when we bought Final Cut Studio that it wouldn't allow this. Our editor doesn't use motion, and while I mainly use After Effects on our motion graphics machine, I was wanting to try using motion for some particle effects. Unfortunately, it won't let me open it while Final Cut is running on our editor's machine. I can understand not letting two copies of same application run under the same serial number at the same time, but it would be nice to be able to use both programs that we own concurrently. At very least it would be good to warn you that this isn't possible in the product description, not in some fine print license agreement once you have already bought the software.
-MattI do not know of any software, in any platform that can operate from the same license over a network simultaneously.This is the exact reason for the existence of Volume Licensing. If for example a project ran in each one of the included applications from different sources that were not an active network, I doubt you would have a problem.Like, doing a project at work and geting the outcome with the Powerbook at home...Sorta!
Maybe you are looking for
-
Slow/non-existent data connection on 3GS/iOS 4.0.1
I have been a happy 3GS user since last December. About three days ago, I synced to iTunes and installed the latest software update, to iOS v4.0.2. Since then, whenever I try to access any web page in Safari, it just sits there for a while trying to
-
Good morning: I have to problem: a) I need to call from PL/SQL a word document: 1)open word document 2)execute a merge file 3)close document 4) return to PL b) From W2000 I want to put (sometimes get too) the result from the Word merge into a unix se
-
Hi Using Dell 2U servers running FreeBSD 6, we are very exciting to get some new Xserve for our web needs. We plan to buy 2 XServe for sharing performances for a huge website and a Xserve RAID. As MySQL can be master-master replicated on its own, we
-
When reinstalling OS X with install disk, wireless mouse doesn't work
I have an unusual problem: My iMAC G5 hard drive died and I installed a replacement disk. Now, I am trying to reinstall OS X 10.3 with the help of my original install CDs that came with the iMAC. Unfortunately, my wireless mighty mouse doesn't react
-
When I click on my email (all email accts) the body of the email is blank. There isn't even the words "download remaining" at the bottom. Sometimes there is the word "loading" in the middle and then nothing. I have an iTouch and an iPad.... they b