Motion 5 freezes after applying the keying filter

Why does my screen freeze (four or five yellow/green bands, curser turns to rotating ball of death) when i try to apply the keying filter in Motion 5?

What's your hardware configuration, mainly what GPU do you have?

Similar Messages

Photoshop 7.0.0 freezes after applying a KPT3 filter.

If you apply any of the KPT3 filter effects (except for the Interform
filter), Photoshop 7 will lock up solid.
As a temporary (or even a permanent) workround you can use the keyboard to
save the image by doing a SAVE AS ([ctrl]+[shift]+S) or a SAVE A COPY AS
([ctrl]+[alt]+S) and save as either a TIFF or a BMP file. This will free up
Photoshop and you can continue working with your image.
If you are working with a layered image, it is important that you are saving
with the advanced TIFF format turned ON - saving as either a standard TIFF
or a BMP will flatten the saved image. However, the image which you have
open in Photoshop will retain its layers until you finally save it - and
then you can choose from the complete range of formats.
Carol
(posted from the UK)

Now that the dot release for Photoshop 7.0 has been released, this fixes the problem so the answer now is:
Update to PS 7.0.1 from the Adobe updates page on their web site:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=1851

My keyboard freezes after using the option key... what gives?

I have a 17" MacBookPro with OSX 10.6.8
The problem: My keyboard key freeze after using the " option key" in Photoshop or when downloading a file using the option key.
I can usually use it 2 or 3 times before it makes a chirping cricket like sound… then my keys freeze up.? The only way to correct it is to restart.
Anyone else have or had this issue? it's frustrating. What's the deal?

hausman wrote:
tianmiao0304 wrote:
Thanks for your explanation!
Can I just bring my laptop to the nearest service center and get this problem solved directly? You know, usually it will takes several days to receive the backup keyborad, I can't wait
You'll have to phone the service center and ask. (When I lived not far from Lenovo's Canadian service center and wanted to bring in a ThinkPad for warranty repair they said that would be OK with them but my unit would be put on a queue the same as if I'd shipped it in. They simply didn't offer walk-in, while you wait service.)
In the interim it may or may not be possible to reattach the key, even just temporarily, depending on whether it wasn't put on properly at the factory or if it's physically broken in some way. Or you could use an external keyboard until Lenovo sends you a replacement, etc.
I've just call the local service center, he told me that he can not repair individual key, they can just replace the whole keyboard..... How bad luck I am!!!

How do I apply the blur filter to all my layers at the same time?

Hi I'm working on a background for a web page and I want to try how different filters are going to affect all the layers. Is it possible to apply a filter to all the layers without flattening the file first? Thanks very much,
Cathy

Thanks very much , that's really helpful,Cathy
Date: Thu, 23 Dec 2010 11:18:21 -0700
From: [email protected]
To: [email protected]
Subject: How do I apply the blur filter to all my layers at the same time?
Hello!
There is no need to flatten the file, but you can create a layer that merges all the content of the image, and apply the filter on that layer.
Target the topmost layer, by holding the Option and . (period) keys, then create a merged copy by holding down Command Shift Option E.
>

HOW to find out the tablespace space utilized by a patch after applying the

someone has already applied the patch in test env before recording the tablespace size , so I cannot find out the figure in test env.
So is there any general practice or general guidelines on it?
hOW to find out the tablespace space utilized by a patch after applying the patch?
Thanks & Regards,
Sree.
Edited by: 846579 on Mar 22, 2011 10:50 PM

I think there is no direct way to determine what tablespace is utilized by a patch from the README file. You could check the content of the patch file and see what modules are affected (assuming there are changes and the database level), then query DBA_USERS (DEFAULT_TABLESPACE column) for those schemas which are updated by a patch. Or, you could check the size of the tablespaces before and after applying the patch and you will determine what tablespaces have been utilized (provided that the application services are down, and none of the application users is connected to the application).
Thanks,
Hussein

Error in BPLE CONSOLE after applying the patch 10.1.3.3.0

Hi,
Since my old version of my soa suite is 10.1.3.1.0 and I applied the patch set(10.1.3.3.0). It changed to 10.1.3.3.0, but when I click the Activity tab of my Bpel Console and checked it for activity states its showing the below mentioned error.
My operating system is windows XP and I also run the upgrade script mentioned in the readme document of the patch set. I don't know what need to be done?
Please help me on this issue.
Error Message:
Build Information:
Oracle BPEL Server version 10.1.3.3.0
Build: 0
Build time: Fri Jun 15 06:05:31 PDT 2007
Build type: release
Source tag: PCBPEL_10.1.3.3.0_GENERIC_070615.0525
Exception Message:
[javax.servlet.ServletException]
Cannot find work items.
An attempt to fetch the work items using the where condition "" from the datastore has failed. The exception reported is: [ODBC S1002] invalid column number
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: SELECT * FROM admin_list_wi WHERE ci_domain_ref = 0 ORDER BY wi_modify_date desc
Exception Trace:
javax.servlet.ServletException: Cannot find work items.
An attempt to fetch the work items using the where condition "" from the datastore has failed. The exception reported is: [ODBC S1002] invalid column number
Please check that the machine hosting the datasource is physically connected to the network. Otherwise, check that the datasource connection parameters (user/password) is currently valid.
sql statement: SELECT * FROM admin_list_wi WHERE ci_domain_ref = 0 ORDER BY wi_modify_date desc
     at com.evermind.server.http.EvermindPageContext.handlePageThrowable(EvermindPageContext.java:866)
     at com.evermind.server.http.EvermindPageContext.handlePageException(EvermindPageContext.java:813)
     at ngActivityList.jspService(_ngActivityList.java:611)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
     at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
     at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:453)
     at activities.jspService(_activities.java:427)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)

Hi Marc ,
Thanks for your reply.....
Did you mentioning the script (upgrade_10131_
10133_oracle.sql) in the orabpel. I had run this script after applying the patch.
Still iam facing the same issue.
what need to be done?
Could you please help me on this, because I need to do the Fault Handling Framework in BPEL and so i need the faultpolicy folder to be present.
Since I got the folder by applying the patch, but what happend is when i try to check out for the activity status in the BPEL Console Activity tab it is showing the error as mentioned earlier. Any problem with patch implementation or any bug is there. So far i done the patch installation successfully without error and i upgraded the orabpel schema using the mentioned script also. Any other things i need to do?
Regards,
Ashok.

When I apply the Key for a green screen, everything blue turns purple. How can I correct?

When I apply the Key to an evenly lit greenscreen, anything blue turns purple. How can I correct this?

There's way too much blue in that green screen
This is green
Try pulling down the spill level and reducing the spill tint. You're probably going to have to tweak the color selection manually.

OIap AW are Invalid after applying the Oracle patch 9.2.0.6

Hi
We have applied Oracle patch 9.2.0.6. after applied the patch we are not able to connect with AW might be all AW are invalid.
i am getting the following error :
ava.sql.SQLException: ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_AW", line 18
ORA-06512: at line 1
at oracle.olap.awm.businessobject.aw.WorkspaceBO.getWorkspacesAttachedBySchemaUsingDML(WorkspaceBO.java:623)
at oracle.olap.awm.navigator.node.aw.SchemaNode.getChildren(SchemaNode.java:87)
at oracle.olap.awm.navigator.node.BaseNodeModel.refreshData(BaseNodeModel.java:74)
at oracle.olap.awm.navigator.node.BaseNodeModel.dTreeItemExpanding(BaseNodeModel.java:221)
at oracle.bali.ewt.dTree.DTreeDeferredParent.__fireExpansionChanging(Unknown Source)
at oracle.bali.ewt.dTree.DTreeDeferredParent.setExpanded(Unknown Source)
at oracle.olap.awm.navigator.node.BaseNode.expandHelper(BaseNode.java:1527)
at oracle.olap.awm.navigator.node.BaseNode.access$000(BaseNode.java:85)
at oracle.olap.awm.navigator.node.BaseNode$ExpansionThread.run(BaseNode.java:1488)
Any idea or thought would be appreciable.
Thanks
Anwar

Please file a TAR with support to resolve this issue.
Hope this helps,
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Consequence of applying the same filter twice to one scene

What would be the consequence of applying the same filter twice (with the exact same settings) to one scene?
For example, I drop the de-interlace filter twice (assuming the exact same settings on the filter) onto the same scene by accident and don't pick up on it later... would that do anything to the quality of the footage?

In general, applying the same filter twice to a clip has its effect applied twice. However this depends on the kind of effect: with de-interlace you might get a degraded image since the first pass removes a field and substitutes it with a new field built by interpolation, then the 2nd pass removes a field again. If it is the same as before nothing should happen, but if it is the other one you degrade the image again.
With broadcast safe I guess you won't gain quality by adding it twice.
Piero

After applying the patch showin error in pages

i applied one patch yesterday which size was 1.5mb i applyed that as hot patch after applying the patch when uer want to open the front end it showing this error that
ORA-04063: package body "APPS.ARPT_SQL_FUNC_UTIL" has errors
FRM-40735: WHEN-NEW-ITEM-INSTANCE trigger raised unhandled exception ORA-06502.
when i am clicking the recevable manger form.any body help me here.
This is the patch number 4727382

They meant to say that the instance is screwed up. You need to clone from your PROD.
Please check the below doc's for cloning procedures.
Note:216664.1 : FAQ: Cloning Oracle Applications Release 11i
Note:406982.1 : Cloning Oracle Applications Release 12 with Rapid Clone
Note:230672.1 : Cloning Oracle Applications Release 11i with Rapid Clone
You'll find many thread's on cloning in oracle forums. they could be handy.

Erron in dispatcher log after apply the patch Sp16

Dear
We have the portal platform NW04 Sp09 on HP-UX 64bit - oracle 9.2.0.6.0 64bit, JDK 1.4.2_09.
After apply the patch Sp16 , We have in trace file defaultTrace.0.trc on dispatcher this error:
#1.5#000F201DDD150003000001490000178F0004110FF810D985#1144660190880#com.sap.engine.core.manipulator.TCPRunnableConnection##com.sap.engine.core.manipulator.TCPRunnableConnection.run()#######Thread
[SAPEngine_ConnectionsManipulatorTMProxy_http,5,main]
##0#0#Error#1#/System/Network#Java###Error in processing data.
[EXCEPTION]
#1#java.net.SocketException: Broken pipe (errno:32)
at java.net.PlainSocketImpl.socketAvailable(Native Method)
at java.net.PlainSocketImpl.available(PlainSocketImpl.java:417)
at java.net.SocketInputStream.available
(SocketInputStream.java:222)
at
com.sap.engine.core.manipulator.TCPRunnableConnection.checkRead
(TCPRunnableConnection.java:392)
at com.sap.engine.core.manipulator.TCPRunnableConnection.run
(TCPRunnableConnection.java:560)
at
com.sap.engine.core.manipulator.TCPRunnableConnection.runIfNotInProcess
(TCPRunnableConnection.java:514)
at com.sap.engine.core.manipulator.ThreadManagerProxy.run
(ThreadManagerProxy.java:93)
at java.lang.Thread.run(Thread.java:534)
Thanks in advance
Bergamasco Alfonso

Hello Alfonso,
Could you solve this problem?. It's happening the same to me.
Roberto A. Villegas T.

After applying the effect supported by the GPU CUDA (MPE) preview stops

Hello,
After applying the effect supported by the GPU CUDA (MPE) preview stops.
This is what is look like:
In this assay uses Fast Color Correction Effect but as you can see is not real-time.
What could be the problem?
My PC config:
MB: MSI P67a-GD65 (rev.B3)
CPU: I7-2600K-3,4Ghz
Radiator: Scythe Ninja 3 Rev.B SCNJ-3100
RAM: Corsair DDR3 16GB (4x4GB) 1600MHz CL9 CMZ16GX3M4A1600C9
DISKS:
DISK 1 SSD: ADATA SP900 256GB 2.5" SATA3 ASP900S3-256GM-C (OS)
DISK 2 HDD: Samsung SpinPoint F3 HD103SJ 1000 GB 7200 RPM 32MB Cache SATA 3.0Gb/s (MEDIA/PROJECT/RENDER)
RAID0: (CACHE/SWAP)
Disk 3 HDD: Hitachi Deskstar T7K500 HDT725032VLA360 320 GB 7200 RPM 16MB Cache SATA 3.0Gb/s
Disk 4 HDD: Samsung SpinPoint T166 HD321KJ 320 GB 7200 RPM 16MB Cache SATA 3.0Gb/s
Disk 5 USB3.0: Iomega ST950032 500GB 2.5 Portable USB 3.0 (BACKUP)
CARD READER CF/MS/MS-PRO/SD/MMC/SM/xD Generic
BR/DVD/RW Bluray LG BH10LS38
GPU 1: MSI GeForce CUDA GTX580 TWINFROZR 3GB DDR5 PCI-E 384BIT DVI/mHDMI N580 TF 3GD5 (PCI Express 2.0 16x)
GPU 2: Gigabyte 9800 GT Silent Cell GV-N98TSL-1GI 1GB (PCI Express 2.0 16x)
Video: Blackmagic Intensity Pro
MOUSE: A4Tech Oscar X748 USB
Keyboard USB
POWER SUPPLY: OCZ ModXstream PRO 600W OCZ600MXSP-EU
CASE: SilentiumPC Gladius 800 Pure Black (GD-800)+4 fans
OS: Windows 64 bit Ultimate

This is normal. Premiere Pro didn't add the Don't Stop Playback feature until CS6.

About the Error after applying product key for bing search rest service

For the Project Siena I ve created the product key for Bing search rest service and i applied that product key which is valid even though i got the error when i click TRY button .can anyone please help me to find the solution
There was an error in retrieving sample data. Error : Unable to reach service. Please check if your service connector configuration is valid and you have network connectivity

Hello,
Thanks for your post. I am jotting down few steps to get the Bing search account key (you may have completed many/all of these).
To add Bing Search Service, go to
https://datamarket.azure.com/account/datasets and search for "Bing Search API". After you have subscribed to the service, navigate to "My Data" and click on Use. Click on Show and copy the
Primary Account Key information.
Note if your key contains a special character like / or = then double clicking on the content will copy the key partially.
Make sure you have copied the full key correctly. If the is incorrectly pasted in Siena's Primary Account Key field, you will get the error below:
This is similar to the error you have posted. Since the Primary Account Key is masked you can never be sure the contents are correct. It's best to clear the field and paste the key again.
If you still face the issue, please post your machine configuration (x86/OS) information.
Hope this helps,
-Karthik
This posting is provided "AS IS" with no warranties and confers no rights.

CK40N - Still open even after applying the note

Hello Everyone!
Greetings!
Experiencing issues in the costing run. SAP ECC 5.0
After the marking job completion observed that there are some u2018Still Openu2019 items. After some research found the SAP notes u2013 0000542790, 0001321242 & 0001402978.
SAP note 0000542790 is not applicable to us as the client is on SAP ECC 5.0. For the short term fix, as per the note 542790 have executed the command u2018=cksuu2019. It worked.
To apply the notes 0001321242, 0001402978 was testing in the test systems and I still see the u2018STILL OPENu2019 items even after implementing the SAP notes 0001321242 and 0001402978. Both the notes have been sucessfully implemented and also verified the corrections.
Any suggestions/advice, please. Thanks in advance !
Satish

Hi Satish,
There can be valid reasons for the 'still open' Materials.
The following are reasons for 'still open'
1. the materials were included in another costing run so there was an
overlap in released cost estimates
2. there was already a released cost estimate for those materials so
the system did not allow for another one - this could have been costed
manually and released manually (ck11) rather than in ck40n
3. there was a stop in the job that ran to release them (you mentioned
periods were closed). After the restart, some of the statistics could
have been incorrectly updated.
Furthermore, please see the note:
542790 Inconsistency correction: Costing run statistics
If need need to find the 'still open' Materials.
If you run tCode 'SE16' and view the table table KALM which contains
the entries for all materials costed within the costing run.
Field 'KALM-FEH_STATUS is the cost estimate's status after step costing.
1) Find cost estimates created originally within cstg run
So, you have to select all entries of KALM for the specific costing
run which are having KALM-FEH_STATUS = 'KA'.
This is the number of cost estimates which should have been marked in
the later marking step.
2) Find cost estimates released successfully
The set of released cost estimates is given by selection of table
KEKO: specify KALAID and KALADAT and FEH_STA = 'FR'.
3) Find missing cost estimates
Compare the results of 1) and 2):
Which material/plant have an KALM entry, but not a released cost
cost estimate ?
> this will be the set of cost estimates you are looking for...
Regards,Declan

How do you apply the same filter to more clips simultaneously?

I am trying to color correct a group of sequential clips and I was wondering if there is a way to apply the filter as if the clips were one single clip, without first exporting them.
Thank you for the help.

If you want to make the same color correction to multiple clips. color correct the first clip.
copy the clip
In the timeline highlight all the other clips you want the same color correction to be placed on.
Control-click a highlighted clip
Select paste attributes
check the filters box, hit okay

Motion 5 freezes after applying the keying filter

Similar Messages

Maybe you are looking for