Motion 5 on Macbook Air/Macmini [2011]
I am planning to buy a Mac for working on Motion 5 and/or After Effects. Just wanted to know which one is the best option:
1. Macbook Air
2. MacMini/Server
Which of these can be upgraded to the max for using the software(s)?
Thank You.
Neither will run Motion and AE very well, the worst choices you can make.
Best is a Mac Pro with 7200rpm SATA drives internally and a min of 8 (if not 12) GB RAM, and the best graphics card you can afford.
Second is an iMac maxed out on RAM, and the fastest CPU and best Graphics config you can afford.
Third would be a MacBook Pro, 17".
Graphics card is going to be the biggest factor here, second to CPU speed and how much RAM. But hard drives need to be 7200rpm, and don't put media on the OS drive for better performance. Internal is best, but FW800 is ok.
Similar Messages
-
hi guys i have a problem related updating icloud desktop.while updating it shows (error code :A12E5).I have macbook air mid 2011..plz sort this out
olliemilne wrote:
- I've tried holding a bunch of different keys when starting up (cmd+R etc.) but again, nothing.
You could try booting the MBP using the OPTION+COMMAND+R keys and see if it will connect to the Apple servers. This would allow you to install the original OSX . I have my doubts though.
- I've tried something crazy suggested in another thread; leaving the Macbook partially opening and shaking it, which supposedly does something to the "sudden motion sensor".
The Sudden Motion Sensor is applicable for conventional Hard Drives, not the SSD that is in a MBA. Doing that will serve no useful purpose.
You have exhausted all reasonable options and will just have to have the MBA evaluated at the genius bar.
Ciao. -
MacBook Air (Mid 2011) doesn't charge
I have a MacBook Air (Mid 2011) and it won't charge the battery when I plug it to the wall adapter.
No matter what i do the light on the L shaped connector magsafe doesnt light up.
After a few tries, a few minutes, or even a few hours it just works..and I don't know why, or what to do to make it work all the time.
I tried resetting the SMC (http://support.apple.com/kb/HT3964), followed every step, but it doesn't help.
I dont know if the problem is in the MagSafe Power Adapter, or if it is in the MacBook Air MagSafe Connector.
Here is a video of me trying to connect it to the Power Adapter without success:
http://youtu.be/3rRko1VncoE
Then 30 minutes later it is working again:
http://youtu.be/j4x3YxWZzAA
This time was 30 minutes, but there sometiimes is much, much longer before I get it to work..
What sloud i do?
My mac is still in the warranty period. If i take it to an Apple Authorized Service Provider (AASP), will they change the faulty component for free?
(Where I live, in portugal, there are no official Apple Stores..so i can't go to one).joolsca50 wrote:
I also have a mid '11 Macbook Air and this exact same thing is happening to me with the charger. Tonight scared me because it would not start charging for a long time. Fortunately I still had battery power left.
Guess I need to go to the Apple Store
I did not have the same problem again..don't know why, but here is what I think:
The mac doesn't charge because it doesn't recognise the charger or the other way around..
Last time this happened I just let the computer connected to the charger, and the charger plugged in the wall, and left it there overnight. The next morning it was fully charged, with the green light on the connector.
After this, there was only 2/3 times that when I plugged the charger it wouldn't do anything, so I just started working normaly on the mac and after a few minutes it started to charge. That first time it took 30 minutes to start. On another ocasion it only took 2 minutes. And after that was just a few seconds. Now it is behaving normaly. When I plug it, the connector turns green after 1/2 seconds.
So, if you have this problem, try just leaving it there..while you work on it, or while you sleep. It seems eventually it will start working. In my case it "solved" the problem, as it isn't happening anymore.. (I hope forever..)
It's not really a solution..but if it works for you too, great! Good luck! -
A friend bought second hand macbook air mid 2011 with crossed circle on the display and give to me to try to recover the system, I tried recovery from partition and same thing occured, after internet recovery it stays the same-crossed circle after reboot, then we tried to boot from USB with mac os 10.8 on it, it installs something,like it has being finishing installation, rebootes, and now it asks for password for boot option.We have no idea what that password could be.What happened!!!
I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2 -
After start Windows 8 on Macbook Air (late 2011) all freeze.
When I start Windows 8 on Macbook Air (late 2011) all freeze. If I switch off Wi-Fi adapter or power unit problem does not exist. Do you have same problem?
Here's how to fix the problem.
Macbook air 2011 freeze fix
1. Install Windows using Boot camp on battery power (AC adapter unplugged).
2. After the installation, right click on the power icon.
3. Click More power options
4. Click change plan settings for the balanced plan
5. Click change Advanced power settings
6. Select "PCI Express"
7. Selct Link state power management
8. Change Plugged in from Moderate to OFF.
Done! No more crashing. Now you can plug in your AC adapter. -
How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011) from a Windows 7 PC?
How do I download Windows 7 64 bit drivers for my new MacBook Air (Mid 2011)? I have already formated the HD and preformed a clean install of Windows 7. Perhaps I did this too early. I have read I need to install the drivers from my OS X DVD, however, OS X Lion does not come on a DVD! I've also read that I can download OS X Lion from the App Store and burn it to a DVD, however, all I have are Windows PCs which don't support the Mac App Store.
Is there no way for me to download these drivers from a Windows PC? I know they exist. However, you are supposed to download them through Boot Camp in OS X when you are creating a new Windows 7 installation. I'm I stuck?I am pretty disappointed in the lack of documentation.
This is the Apple Support page for Boot Camp:
http://www.apple.com/support/bootcamp/
No mention anywhere of Lion, of 4.0/4.01
In the past, 10.6.6+ was suppose to - and sometimes did - provide for a download drivers from within Boot Camp Assistant program, in order to save them to flash or such (that should be about 1GB, too large for CD). Some macs req'd a USB-DVD or other driver that was needed pre-install of Winidows
You don't install Apple drivers until after Windows is installed otherwise,
It is possible for me, with a tower, to run w/o needing any drivers from Apple. But with laptops, mini, you do need some drivers from Apple for graphics, internet, wireless, SMC support.
And right now, loading any Apple support Tech Note articles is very very slow.
People keep asking why Apple can't post 3.0 or 4.0 like they do the updates. Only logic is to force t he download from inside OS X or from an OS X DVD. Otherwise would be here, and avoid all the trouble. they aren't of use on a PC, and any PC motherboard vendor does post their support software for download.
Apple Support Downloads #bootcamp -
Serial number? I have a MacBook Air (mid 2011). When I go into about this Mac or any of the other ways to look up the serial #,all it says for serial number is systemserial#. Is there a way to fix this?
About This Mac will show something like this:
Click on More Info... leads to some thing like this:
Serial Number is the second line from the bottom. -
I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version? Please advise. Thanks in Advance.
Hi Syednz,
If you are looking for the BootCamp Support Software for your MacBook Air, you may find the following articles helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Apple Support: Boot Camp Support Software 4.0.4326
http://support.apple.com/kb/DL1636
Regards,
- Brenden -
Do all your cases and screen covers for MacBook air 2010-2011 fit the 2012 model
Do all your cases and screen covers for MacBook air 2010-2011 fit the 2012 model
Upon receiving my 2012 MBA, I removed the inCase hard shell from my 2011 model and fitted it to my 2012 unit. The fit is identical. Dimensionally they are the same.
So, if you are asking do all of mine fit? Yes they do. -
Macbook air (late 2011) & Apple TV
How do I mirror my macbook air (late 2011) onto Apple TV?
No you don't have it kbirbalsingh, you need OS X 10.8 Mountain Lion or newer which is a purchase from the App Store.
There are third party apps such as airparrot, reflectorapp and beamer which could also help you with OS X 10.7 (I have only used airparrot myself).
Jules -
Macbook air mid 2011 cpu overheating with yosemite
Hi,
after upgrading to OS X Yosemite, my MacBook air mid 2011 is constantly overheating, the CPU in particular, rapidly reaching 96-97 °C.
The CPU fan is (fortunately!) working regularly.
Did not experience such problem until yesterday morning, before upgrading to the new OS.
Activity monitor shows CPU use by "launchd" in particular.
Thanks for any hint,
DanieleHi,
thanks all for the replies.
I tried SMC reset following dominic23's suggestion, but that did not solve the issue.
After other attempts, I decided to go back to Mavericks, thanks to the time machine backup.
I have finished the process now and I'm writing you with the old 10.9.5 version. Everything is fine.
In my case, more than the CPU temperature and the noise, the worst part was the battery life, that dropped down to less than half an hour (I am used to almost 3 hours).
Thus, for all the MacBook Air (mid 2011) users, I strongly suggest to check on forums etc. before upgrading to Yosemite.
Daniele -
MacBook Air 13" 2011 Bluetooth Issues
I recently upgraded from a MacBook late 2007 to a MacBook Air 13" 2011. Both systems were running Lion GM, and I transferred all my data from the old machine to new using the Migration Assistant that started on first boot on the new machine.
I'm having some weird issues with Bluetooth. I have a Magic Mouse, and when I open the Bluetooth Setup Assistant, it shows a list of Devices and Types, but all the devices show the Hardware ID (MAC address) only, not the device name (even for others like Printers/Smartphones). If I add the mouse from here, it works fine, but in the Bluetooth menu under devices it shows the MAC address of the device only instead of Apple Wireless Mouse, and it does not give me any battery information, just an option to disconnect.
The Bluetooth seems to have problems getting the names of any Bluetooth devices, and just shows everything by MAC address.
If I open the Bluetooth preferences, and I choose the mouse and go to Update Services it then shows it as an Apple Wireless Mouse but I still can't get any battery info. Also, after the computer reboots or if I disconnect/reconnect the mouse it again shows using the Bluetooth MAC address only. The Update Name option seems to have no effect.
Also, before doing the Update Services thing the computer doesn't even seem to know what type of device it is.Wow, same problem - brand new, 2011 13" MacBook Air and also used migration assistant.
Here's what I see:
(1) Bluetooth Preferences - check box on (and I'm able to uncheck it), Discoverable box is dimmed and not checkable.
(2) Discoverable box can be "auto-checked" if bluetooth sharing is turned on, but the Discoverable checkbox still remains dimmed.
(3) All Bluetooth paired items (when I can get them to be paired) show up as hex addresses only - no names.
Called and talked with Apple Support - they suggested this:
(1) reset PRAM and SMC - did that, no change
(2) Then they suggested to create a new user and see if the bluetooth issues follow to the new user - they did.
(3) So based on that, they suggested to boot (command-r) and re-install using the Recovery Option - I have not done that yet and I'm hesitant to do this because I believe that this will not fix the problem.
Some things I did that they did not suggest:
(1) Ran Repair Disk Permissions - no change.
(2) moved /var/root/Library/Preferences/blued.plist to something else and then restarted "blued" - no change.
For #2 - you'll need to do it this way - if you think this will make a difference:
sudo mv -f /var/root/Library/Preferences/blued.plist /var/root/Library/Preferences/blued_bak.plist
sudo killall blued
this will create a new blued.plist file - do this to see that:
sudo ls -l /var/root/Library/Preferences
You should see your old backed up copy and the newly created one.
Bob M -
I have MacBook Air late 2011 with encryption enabled the mac froze and I pressed the power button to shut it down but then the gray screen appeared no wheels nothing just gray. I tried all steps but nothing helped. Worse than that only the pram key combination works I cant get the cmd-r or just alt or any combination to work??? Any suggestions would help. Thanks!
P.s. I am on mountain lion with ssd encryption enabled. The mac froze when the internet stopped the one from the cable (I use ethernet usb one) when I turned wifi on it froze. I have disconnected everything when trying the steps except power cable.Boot into Internet Recovery (command-option-R at the startup chime) and try to repair the boot volume in Disk Utility. You will have to unlock the volume before you can do anything with it.
-
i have a macbook air mid 2011 with that came with Lion. if i format my mac the recovery partition is downloading the latest version of Lion and installs it. will i be able to do the same but with mountain Lion? i like clean installions of OS and not updating old one to a new with from the OS itself.
thanks!You would first need to buy Mountain Lion from the Mac App Store and install it. During the initial install it may give you the option of running Disk Utility to wipe the drive it is being installed to (Not sure as I have never done it as ML is not available). If it doesn't give you that option then you would need to install if over the top of Lion and when doing so it shoild update the Recovery HD partition to work only with ML. Then using the Recovery HD WIPE the main partition and then Reinstall ML.
You could also use the downloaded ML files to create your own USB thumb drive of the install files then use that to wipe the drive and reinstall.
In any event the install routine should update the R-HD to work, download, only with ML. -
Macbook Air 11" 2011 screen brightness
My macbook Air 11" 2011 screen brightness seems defective.
Whenever I turn it on, it automatically goes to low brightness whatever the ambient lighting conditions.
Anyone with the same problem ?
Thanks !This was my battery info last time I checked
Charge Information:
Charge Remaining (mAh): 0
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 0
Health Information:
Cycle Count: 0
Battery Installed: No
Amperage (mA): 0
Voltage (mV): 0
What is going on?
Maybe you are looking for
-
My iPhone 4S had the iOS 6 update and I have been trying to download all day but it won't work and now when I go to software update of says iOS 5.1.1 is up to date. And I cant restore my iPhone becuase when I go onto iTunes it says that it can't find
-
In the metadata repository, display the object detail links don't work
We've upgraded to 7.3 and when we lick on display the object details links we get the following message. I've looked in SICF and everything looks active and is set up Service cannot be reached What has happened? call was terminated because the corre
-
Mavericks getting error "file: table is full"
Hi, since upgrading to Mavericks I noticed very odd behaviour on my MBP 2012 after some days of uptime. Tabs in browsers stopped working, internet connections got cut off and apps crashed and weren't able to restart. Only a reboot helped. This starte
-
Problems at sending IDOC from XI to R/3
Hello everybody, I have a problem sending an IDOC (WPUUMS) from XI to R/3. Everytime the ERP system presents overflow problems at the locked table, the IDOC, send by the XI, is not created. The type of the sending message is asynchronous. I tried to
-
I installed the 9.0.3 update because I could not find an option to uncheck it from the Updater. Since installing it, PSE 9 will no longer open images in floating documents, which is my preference. Now I have to drag each image tab to get them to fl