Motion and alert message

I have built maps for a TV show. They are vector, I was able to put the movement in the map as I wanted to do in motion. I made a QT movie of it and opened it in a new project to add text while still in motion. It's simple.
When I try to make a QT movie of the map and the text together I get an alert message that only says that it had trouble with the export?
I tried then to just import it into FCP. I plop it on the timeline... render it there and I get a message in purple? that says during these particular frames there are render issues? Any ideas out there and is there a more elaborate description of what these various alert messages mean?
Greg

I have built maps for a TV show. They are vector, I was able to put the movement in the map as I wanted to do in motion. I made a QT movie of it and opened it in a new project to add text while still in motion. It's simple.< </div>
There's been nothing simple about your project, Green.
There are only two reasons I can think of that would prevent your movie from playing: A: It's not rendered properly; and B : It's not rendered properly.
Never seen purple error messages in the FCP interface, sorry, that's new. But there's obviously something odd about this movie. We may or may not be able to help.
When you said vector art in earlier posts, did you ever identify the source application like Illustrator? Motion's vector rasterization isn't dependable but it does seem to work with AI files. I just don't bother with Motion for these things, I revert to what I know works: After Effects
If this was my project, I'd abandon Motion for now and hire an After Effects artist just to get it done. Then go back and figure it out.
If you get the movie properties from QT Player, what's the image size, codec and frame rate?
I hope Patrick and the rest of the wonks can help you out.
bogiesan

Similar Messages

Owb process execution and alert message

Hi,
Do we have any provision to give an alert message in OWB during or before starting execution a process? If any please let me know.
Thanks
Ram

HI,
There is no such option as of now.
You can maintain your own audit tables and you can register the messages of your processing. Whenever you start process or end process, you can log a record in ur defiend audit tables.
If you want to implement in mappings, you can use premap and postmap operators to log the details.
Regards,
Gowtham.

BPM and alert message

Hi, all
- in transaction ALRTCATDEF, i have specified dynamic text for my alert category
- in my BPM there is control steps
- In the bpm, i have created a variable ERR of string type in a container
- in the container operation i have assigned my variable ERR with ST./p1:MT_STRING
ST is contained:
 <MT_STRING>
 text
 <MT_STRING >
 (for example)
- in the control step, i have specified my alert category
- the alert message i have specified with this text: error &ERR&
But i have recived mail with only 'error'. The content of my variable ERR did not display.
When i use the variable of integer type, this prooblem does not appear.
Thanks,
Lyudmila DRuzeva

Hi,
check this alternative way of populating alerts
(with long texts)
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
you can also send it in normal send step
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Ringer and alert messages won't play on iPhone 4 when someone calls or sends a message, just vibrates.

Hello, I updated my iPhone 4 and after updating it to 5.0.1, all my sounds won't play, it vibrates when someone calls me, but it will not ring, or notify if there is a new message, however when I go to setting n tap the song to preview it, it will play, what happened to my phone this has never happened before I updated to ups 5.0.1, I already turned it off and back on but still no good, please help.

Rebooting the phone seems to have solved this for the time being. I will let everyone know if it recurs.

How To Supress Acrobat Error Message And Alert Message

Is there any way to supress those pop up message?
If can't, is there any way to catch it?

I have been trying to find more details about AVAppModalWindowIsOpen(), but have had no luck. Which namespace is it in? Do you have any sample code?
Any help would be greatly appreciated.

Clear and delete warning and alert

HI guys,
in alert tab of GC i've seen many of warning and alert messages with the select field for clear it in grey state. if i check these alerts it doesn't available the clear alert bottom.
i just can try to use "emctl clearstate agent" on target host but nothing to do..
why some alert are not clearable and how i can delete it??
thanks
Andrew

Hi
The GC clean the alerts of this way:
- If the alert is warning, you must to clean manually this alert in th ALERTS tab section of GC Console.
- If the alert is critical the clean process is maually.
When you entry first time in the Metrc and Policy Settings in Oracle database, exists a type of metrics that change of stete( example Invalid Objects in schema) but other metrics collect information and this information not change ( Example Generic Log Error ) .
The metrics of first time clean wher the collection of metric check that his value is less that the value thar produced the error.
Regards

Where can I find the Coherence log or alert message?

Where can I find the Coherence log ands alert messages?
e.g.
partitioned cache-related log messages.
configuration-related log messages.
network-related messages.
Thank you

Hi,
All messages by default are sent to stderr and can be configured either through specifying an tangosol-override file and setting appropriate options listed here: [http://wiki.tangosol.com/display/COH35UG/logging-config|http://wiki.tangosol.com/display/COH35UG/logging-config] or setting JVM args:
tangosol.coherence.log
tangosol.coherence.log.level
...or you can specify your own logger such as log4j or jul using tangosol.coherence.log.logger
--harvey

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

Outlook 2016 getting crashed and throws an alert message as "microsoft outlook has encountered a problem and needs to close.

Hi,
Today i installed Microsoft Office 2016 preview for my Mac OS X 10.10 Yosemite. Word, Excel and Powerpoint applications are working without any problem. However, Outlook getting crashed and throws an alert message as "microsoft outlook has encountered a problem and needs to close.", it's happens always, when i launch outlook. please suggest me, how can i comet from this issue.
Thanks in advance,
Suresh Balakrishnan.

Go to the Microsoft site for help. These forums are not offering support for MS products, especially not for beta products.

My ipad was is displaying an alert message " A wi-fi connection is required to download your apps and media". So it has been connected to the internet over night and this morning but is still displaying the alert message and it won't go away. what to do?

Hi,
My name is Norbert. I am having some difficulties restoring my icloud back up. My ipad was doing an icloud back up and the alert message displayed on the ipad after my internet was interrupted "A wi-fi connection is required to download your apps and media".
I got the internet working, my ipad is receiving internet network but the alert message is still displayed on the ipad and won't go away, to make matters worse the ipad is frozen and i can't do anything.
Please can anyone with a similar experience tell me what to do in this situation?
Thank you

Welcome to the Apple Community.
Have you tried a hard restart. Press the on/off button and homescreen buttons together until the device shuts down.

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?

Why do i keep getting an Alert message saying "The URL is not valid and cannot be loaded "?
This happens a lot regardless of the web page. I continually have to restart FF and it persists still

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Different alerts for email and sms messages for a contact with custom ring tone

Hello,
I have a Curve 8530 with OS 5.0.0.395.
I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
Thanks.

Hello,
Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How to validate the incoming field value and raise an alert message

Dear all,
I have the following structure
If incoming value for the field externalid is empty then i have to raise a alert message to end user "externalid field is empty for the id : id number" and for all incoming values it should work. I used the following udf on field externalid with two arguments
if(externalid.equals(""))
throw new RuntimeException("externalid field empty for the following id : " +id);
else
return externalid;
This is working fine for single record. But for many records(multiple occurences), this logic is not working as if records 2 and 3 fails it is showing exception externalid field is empty for the id : record 2.
how to achieve the tranformation logic ?
Regards
Koti Reddy

Hi Amit,
I have tried the above udf, but still stuck-up.
For the above structure shown in image, i have tested giving the following payload
<?xml version="1.0" encoding="UTF-8"?>
<ns0:upsertRequest xmlns:ns0="http://sap.com/xi/SFIHCM01">
 <sessionId/>
 <upsert>
 <type/>
 <sfobject>
 <id>1</id>
 <businessKeys>1</businessKeys>
 <type>1</type>
 <status>1</status>
 <externalId>1</externalId>
 <username>1</username>
 <firstName>1</firstName>
 <lastName>1</lastName>
 <mi>1</mi>
 <gender>1</gender>
 <email>1</email>
 <managerExternalId>1</managerExternalId>
 <hrExternalId>1</hrExternalId>
 <department/>
 <jobCode/>
 <division/>
 <location/>
 <timeZone>1</timeZone>
 <hireDate/>
 <empId/>
 <title/>
 <businessPhone/>
 <fax/>
 <addressLine1/>
 <addressLine2/>
 <city/>
 <state/>
 <country/>
 <zipCode/>
 <reviewFreq/>
 <lastReviewDate/>
 <matrixManagerExternalIds/>
 <defaultLocale/>
 <customManagerExternalIds/>
 <secondManagerExternalId/>
 <loginMethod/>
 <proxy/>
 </sfobject>
 <sfobject>
 <id>2</id>
 <businessKeys>2</businessKeys>
 <type>2</type>
 <status>2</status>
 <externalId>2</externalId>
 <username>2</username>
 <firstName>2</firstName>
 <lastName>2</lastName>
 <mi>2</mi>
 <gender>2</gender>
 <email>2</email>
 <managerExternalId>2</managerExternalId>
 <hrExternalId/>
 <department/>
 <jobCode/>
 <division/>
 <location/>
 <timeZone/>
 <hireDate/>
 <empId/>
 <title/>
 <businessPhone/>
 <fax/>
 <addressLine1/>
 <addressLine2/>
 <city/>
 <state/>
 <country/>
 <zipCode/>
 <reviewFreq/>
 <lastReviewDate/>
 <matrixManagerExternalIds/>
 <defaultLocale/>
 <customManagerExternalIds/>
 <secondManagerExternalId/>
 <loginMethod/>
 <proxy/>
 </sfobject>
 <processingParam>
 <name/>
 <value/>
 </processingParam>
 </upsert>
</ns0:upsertRequest>
No node is creating for success records, instead it throws exception that "externalid field is missing for the id": id for empty externalid field value in second record.
But my requirement is..... when i process 50 records, records with missing value for field externalid should raise an alert message to end user intimating him to check the externalid field for particular id. If the value for externalid field is present in incoming record/payload, then it should be passed to target system.
How can i implement this logic ?
Regards
Koti Reddy

Alert Message and linefeeds

I can create a multi-line alert in the Forms 6i Builder, Alert Property Palette, in the Message by using the editor window and typing and using the Enter key to break the line. When I close the edit window, the text shows up on the property with a box where the linefeed is. If I cut the box and paste it into a different editor, I see it is actually the chr(10) linefeed character.
When I compile and run the form on Web Forms 6i, the message displays as a multi-line message, with linefeeds where I wanted them.
However, I cannot use Set_Alert_Property to set the message. The Chr(10) characters are displayed on the web forms as a square box.
An earlier topic here reported that using \n or /n in place of chr(10) would work in Web Forms, but I cannot get either to work.
So if anyone knows how to use Set_Alert_Property to set the message containing a linefeed that works on Web Forms 6i, I would really like to know.
Thanks in advance.

Ok, upon further investigation, I found that I was mixing alert messages with stacked messages via the Message command. We use a generic PLL_ALERT call to display popup windows. It checks to see if an alert named 'ALERT_001' is defined in the current fmb, and if so, AND if the message is less than 200 characters, uses the alert. If there is no alert defined or if the message is more than 200 characters, uses the stacked message command.
It is in the stacked message on the web where both CHR(10) and CHR(13) do NOT work.
Here is what I found:
CHR(10) starts a new line for:
Forms6 client/server alert
Forms6 client/server message
Forms6 web alert
***fails (space) Forms6 web message
CHR(13) starts a new line for:
Forms6 client/server alert
Forms6 client/server message
***fails (a box) Forms6 web alert
***fails (a box) Forms6 web message
CHR(138) starts a new line for:
***fails (S) Forms6 client/server alert
***fails (S) Forms6 client/server message
Forms6 web alert
Forms6 web message
The CHR(138) 'S' has a curve (umlaut?) above it in Forms6 client/server.
Here is the code I used in a key-dup-item trigger to get my results above:
DECLARE
msg VARCHAR2(300) :=
'____long_line_to_set_alert_window_width____ '
||'CHR(10)---a'||CHR(10)||'b---'
||'CHR(13)---c'||CHR(13)||'d---'
||'CHR(138)---e'||CHR(138)||'f---';
BEGIN
SET_ALERT_PROPERTY('ALERT_001',ALERT_MESSAGE_TEXT,msg);
IF SHOW_ALERT('ALERT_001') = 0 THEN NULL; END IF;
-- stacked messge --
MESSAGE(msg);
MESSAGE(' ',NO_ACKNOWLEDGE);
END;

Motion and alert message

Similar Messages

Maybe you are looking for