Motion and Compressor Gone Dead

Following a recent replacement of my internal hardrive - the previous one crashed - Motion and Compressor just wont start. I've tried changing users re-installing, trashing preferences, uninstalling, reintalling to no avail. I get the following log
Date/Time: 2006-12-19 22:20:47.612 +0100
OS Version: 10.4.8 (Build 8L127)
Report Version: 4
Command: Compressor
Path: /Applications/Compressor.app/Contents/MacOS/Compressor
Parent: WindowServer [70]
Version: 2.0.1 (2.0.1)
PID: 473
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/Helium.framework/Versions/A/Helium
Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/Transcoding.fram ework/Versions/A/Transcoding
Reason: image not found
and
Date/Time: 2007-02-01 02:29:53.469 +0100
OS Version: 10.4.8 (Build 8L127)
Report Version: 4
Command: Motion
Path: /Applications/Motion.app/Contents/MacOS/Motion
Parent: WindowServer [11662]
Version: 2.0.1 (2.0.1)
PID: 11753
Thread: Unknown
Link (dyld) error:
Library not loaded: /System/Library/PrivateFrameworks/Helium.framework/Versions/A/Helium
Referenced from: /Applications/Motion.app/Contents/MacOS/../Frameworks/Ozone.framework/Versions/ A/Ozone
Reason: image not found
Please help someone out there.
Powerbook G4 17"   Mac OS X (10.4.3)  

Likely you need to reinstall FCS2 but first you could try this:
Here is another way without doing a complete re-install. Pay for and download Pacifist.
1. put your fc studio install dvd in the drive
2. drag the installer icon onto the pacifist icon
3. click "skip" for all the media content
You will see a list of all the install packages on the DVD
4. Select this one: "Contents of MotionGroup"
5. Click the "install" button in the upper left of the window.
6. Only the motion installer will execute and replace all the frameworks, components etc in your library.
The reason that a fresh install does not work, is that the installer assumes an "upgrade" and leaves the original files
in the various library directories alone. These files must be replaced and pacifist will save you about a day's worth of re-installs.
Then there's this:
http://docs.info.apple.com/article.html?artnum=302845

Similar Messages

  • "Motion and Compressor Will Not Open Because Of A Problem"?

    Last week I installed FCS 3 on my iMac and everything appeared to work OK.
    However, as my iMac had been cluttered with rubbish for 2 years I erased the Hard Drive and reinstalled OSX 10.6.3 together with all FCS 3.
    I have only used FCP and STP since then but today I discovered that Motion and Compressor "will not open because of a problem".
    Here are the reports where it appears that in both cases the "Dyld Error Message", whatever that is, reports that "Library not loaded etc. etc."
    Incidentally there are mentions of 14 and 18 crashes since last reports. This is ridiculous as I have only just tried to open them 3 or 4 times in the last 5 minutes . . . . and the computer OS and apps are all freshly installed.
    Process: Motion [578]
    Path: /Applications/Motion.app/Contents/MacOS/Motion
    Identifier: com.apple.motion
    Version: ??? (???)
    Build Info: Motion-6870000~22
    Code Type: X86 (Native)
    Parent Process: launchd [98]
    Date/Time: 2010-05-21 15:45:02.265 +0100
    OS Version: Mac OS X 10.6.3 (10D578)
    Report Version: 6
    Interval Since Last Report: 148993 sec
    Crashes Since Last Report: 14
    Per-App Crashes Since Last Report: 2
    Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
    Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
    Reason: image not found
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
    Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
    Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-875
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
    USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
    USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
    USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    FireWire Device: unknown_device, Unknown
    Process: Compressor [629]
    Path: /Applications/Compressor.app/Contents/MacOS/Compressor
    Identifier: com.apple.compressor.Compressor
    Version: ??? (???)
    Build Info: Compressor-3015328~22
    Code Type: X86 (Native)
    Parent Process: launchd [98]
    Date/Time: 2010-05-21 15:52:33.008 +0100
    OS Version: Mac OS X 10.6.3 (10D578)
    Report Version: 6
    Interval Since Last Report: 149440 sec
    Crashes Since Last Report: 18
    Per-App Crashes Since Last Report: 6
    Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
    Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/StompTypes.frame work/Versions/A/StompTypes
    Reason: image not found
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
    Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
    Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-875
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
    USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
    USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
    USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    FireWire Device: unknown_device, Unknown

    As I was installing Motion from a backup disk image, I thought maybe the .dmg was corrupt, so after deleting again I put the original DVD in and reinstalled.
    However, it still won't open and the crash report seems a little different:-
    Process: Motion [783]
    Path: /Applications/Motion.app/Contents/MacOS/Motion
    Identifier: com.apple.motion
    Version: 4.0.0 (687)
    Build Info: Motion-6870000~22
    Code Type: X86 (Native)
    Parent Process: launchd [131]
    Date/Time: 2010-05-21 17:44:14.127 +0100
    OS Version: Mac OS X 10.6.3 (10D578)
    Report Version: 6
    Interval Since Last Report: 153737 sec
    Crashes Since Last Report: 27
    Per-App Interval Since Last Report: 218 sec
    Per-App Crashes Since Last Report: 4
    Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Symbol not found: __ZN14LiSimpleCamera15setDOFDepthModeEi
    Referenced from: /Library/Application Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Versions/A/Ozone
    Expected in: /Library/Application Support/ProApps/SharedA/Frameworks/Lithium.framework/Versions/A/Lithium
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
    Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
    Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-875
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
    USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
    USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
    USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    FireWire Device: unknown_device, Unknown

  • Aperture, iPhoto, Mail, FCP X, Motion and Compressor suddenly kaput!

    Yesterday I discovered that Aperture and iPhoto, which I hadn't used for several weeks, were refusing to open and throwing up an error message saying there was a "problem and they probably weren't compatible with this version of the  operating system etc."
    Shortly after, I discovered that Mail and the latest versions of FCP X, Compressor and Motion were also disabled.
    After searching the internet/forums it appeared that this problem (with Aperture) could be caused by installing FCE 4, which I had done a week earlier and the only cure was to reinstall the OS.
    I deleted FCE 4 and went through all the usual troubleshooting strategies to no avail so I reinstalled OS X 10.8.5 which which took less than an hour and luckily appears to have cured the problem. (I had been dreading reinstalling the OS  as I mistakenly assumed it would wipe all the apps and folders off my Mac ......... but of course it didn't.)
    So has anyone had a similar experience or can shed any light on this?
    Now I have to decide whether I dare reinstall FCE 4 ...........

    Quite a few bug fixes, like the text position bug in Lion has been fixed.
    Here's some from Tim Payton on the COW
    - During Playback, zooming the timeline with the keyboard doesn't send you to the end of the timeline
    - Scale controls on timeline now update live
    - Synchronize Clips now works if you have multiple non overlapping video clips for a single audio clip. (huge!)
    - Preroll and Post Roll settings in preferences work.
    - HDV Footage with "better performance" doesn't look nearly as bad. Way less flashing.
    - Timeline feels much snappier.
    - Timeline index now includes sortable columns: name, roles, & notes, and you can edit the values! (huge!)
    - Zooming on the timeline now really centers on the playhead if skimming off, skimmer if skimming on
    - Inspector updates more consistently to the clip selected.
    - Startup is much faster.

  • I drpped my iphone 4S and its gone dead.

    I dropped my iphone 4S about 18 inches off a coffee table and its died completely. What has happened?

    The drop damaged it, that's what happened.

  • Can I use motion 5 and Compressor with Final Cut Pro 7?

    Hi, Guys and Girls:
    After reading a lot about the new Final Cut X I decided not to buy it. I´m not gonna say anything about it, pretty much everything has been said so there´s no point in being redundant about it.
    So my question is this:
    Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?
    I heard the new version of Motion is nice, not so sure about the new Compressor but any improvement would be nice.
    Thanks in advance.
    Daniel Sametz.

    Anyone?
    Can I use the new version of Motion and Compressor with the old Final Cut Pro 7?

  • Artifacts when rending a simple two minute video from Motion or Compressor

    I keep getting artifacts randomly throughout the videos I export, whether i export directly from motion or via compressor, and regardless of which "Share" option I choose or which codec I use (including ProRes - all of them). I've tried literally every preset and even made my own. Its very frustrating because even one artifact messes up the whole video and I have to export it again.
    The artifacts show up randomly throughout the videos so its not one particular asset that is a problem. And sometimes it even exports perfectly except that a video at the end (which is admittedly not from a high quality source) shows up SUPER pixelated. This is just as bad.
    I've spent the last 48 hours rendering and rerendering the videos. Saving as a new motion file. Clearing cache and library files and pram and restarting. Nothing helps.
    This is on top of the fact that I have, in the past, exported properly from compressor (but never from motion for anything more than a few seconds). And I tired this on two computers, one more powerful than the other. One computer is a Macbook Pro w/ core i7, SSD, and 8gb ram. The other was a Macbook air with Core2Duo and 4gb ram. Both of them sucked at exporting the movie. (The air was slower but actually better than the macbook pro.) I'm on the latest mavericks and the latest motion and compressor.
    HELP! PLEASE! I dont know what to do!

    You haven't said if the original video you imported into Motion is MP4 or H.264 or some other highly compressed media. It won't matter what you export if those "damaged" frames are in the original (and mp4/h.264/etc are prone to bad frames at the very beginning and very end depending on how they were prep'd for delivery).
    You should (I'd say always, except I'd be a hypocrite) transcode original media into ProRes (any flavor) before importing into Motion. Check frame by frame if you have to to see if there's any damaged frames (usually there won't be.) I'd highly recommend using Quicktime 7 Pro (it's still available from apple's online store at apple.com) to transcode your video. Others might recommend MPEGStreamclip (but I just can't); or if you have it: Compressor.
    If you have Final Cut Pro X, you'd be better off editing video in that app. You should be designing your Motion "add-ons" as effects, titles, transitions or generators for use in FCPX and leaving the video completely out of Motion. FCPX also takes care of transcoding to prores for you (opt to Transcode Optimized Media when importing.)
    PS - you'll get better performance out of Motion if you use ProRes video. (Same goes for AIFF/WAV audio and NOT mp3.)
    Hope this helps... otherwise I don't know what the problem would be.

  • Hi my I phone has just gone dead the battery would have been about 50% charged and it does not turn on or is taking a charge any ideas

    Hi my I phone has just gone dead it has about 50% charge and wont turn on. It dont seem to take a charge either?
    Any ideas my whole business revolves around this bloody thing with out it I am *********
    Can some one help please??

    Hello, gypsumspring. 
    Thank you for visiting Apple Support Communities. 
    Here are the best resources to go through when experiencing this issue.
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Cheers,
    Jason H. 

  • Motion 5 and compressor 4 with FCP ?

    Hi,
    Is it possible to use motion 5 and copressor 4 with FCP 7 ?
    Thanks
    Ivan

    Sort of – by exporting and reimporting as clips. There is no round-tripping. For example, you can't send a clip as a Motion project to Motion4, save and have the clip update in FCP. You'd have to export a clip (or sequence) as a self-contained movie and bring it into Motion (or Compressor), make your changes, exporty and reimport as a clip, see how you liked the result, etc. Much easiier to stay within FCS.
    Russ

  • Motion 5 and Compressor 3?

    I have Compressor 3.5.3 (from Final Cut Studio 2) and have recently purchased Motion 5. Prior to Motion 5 I was using Motion 4 and have installed 5 in the way described in these forums to maintain it alongside 4. This means I still have the 'old' versions of all the Final Cut Studio applications.
    Within Motion 5, the 'send to Compressor' option just points me to the App Store. Is there a setting somewhere that will allow me to send it to 3.5.3 or is it totally incompatible? (I know I could output from Motion and then re-render in Compressor, but I don't really want the double render.).
    Thanks if anyone can help.
    David

    Hi
    Export you Project with the Apple Prores 4444 codec, it'll be just fine.
    So you'll obtain a best quality quicktime file compatible with compressor 3.5.3
    Olivier

  • Motion. Compressor and FCP

    Really pleased that FCP now supports 720/50p but the ProApps 2007/02 update has broken Motion, FCP and Comprossor. In Motion I can't open the Library or File Explorer. In FCP the Motion Master Templates won't let me drop clips into the drop zones, which is exactaly what I've been doing in my present project. I've tried reinstalling and, if I don't upgrade Motion it works, but if I upgrade FCP to 6.0.2 the Motion templates don't work. Compressor just doesn't open.
    HELP! I'm in the middle of an edit and northing's working. Can anyone tell me what's going on?

    Sort of – by exporting and reimporting as clips. There is no round-tripping. For example, you can't send a clip as a Motion project to Motion4, save and have the clip update in FCP. You'd have to export a clip (or sequence) as a self-contained movie and bring it into Motion (or Compressor), make your changes, exporty and reimport as a clip, see how you liked the result, etc. Much easiier to stay within FCS.
    Russ

  • I finished a video on whale watching, I retimed some of the clips to run slower to reduce boat motion and added a few whale sound effects, when trying to send to media browser or compressor I keep getting  Frame 3085 (error-1) please help

    I finished a video on whale watching, I retimed some of the clips to run slower to reduce boat motion and added a few whale sound effects, when trying to send to media browser or compressor I keep getting  Frame 3085 (error-1) please help

    Trash your preferences. Trash your project render files. Switch off background rendering. Do not render. Export.

  • I'm creating a lower third in Motion and importing into FCP X, but the alpha channel is gone when I import into FCP.  What am I doing wring?

    I'm trying to export from Motion 5 with an alpha channel, but in FCP X the alpha is gone. What do I do?

    if you're exporting video animation out of Motion and you need transparency, then you need to make sure that the codec used is ProRes 4444. There are no other options.  From the Share > Export dialog, the default Export option is usually "Same as Source." In Motion, that *should* be PR4x4. You can double check that setting by clicking the summary button and reading the last line.
    You also need to make sure under the Render section that Color + Alpha is selected (that should also be the default setting.)
    However, most of all, you're really wasting your time going about it this way.  If you started a Title project in Motion, all you have to do is Save and give the project a Name; pick a category or create a new one.  In FCPX, in the Titles browser, look for the category you used and find the project name and drag it onto the storyline.
    You have the option of picking parameters in your motion project that you can "publish" to FCPX (things like the lower third background color, text color, positioning, etc... almost every parameter is publishable to FCPX allowing you to customize the project *inside* FCPX.)  Any parameter you publish in Motion will be in the Title Inspector in FCPX. You do not have to "bake" your lower third in Motion before using it in FCPX. You can pretty much turn your project into an FCPX plugin.
    If you didn't start a Title project, you can still build your lower third as an FCPX Generator. Go to the File menu and Publish Template...  In the dialog box, make sure you check Publish As Final Cut Generator. Give the project a Name and select a category (you'll need to wait a few seconds until the Categories update to the FCPX categories...) You can create a custom category if you like and save the project. In FCPX, instead of the Titles browser, look for your template/plugin in the Generators > WhateverCategory > YourLowerThird.

  • Recent Software Update - Recommended for FCP X, Motion 5 and Compressor 4 Users

    There is a recent Software Update ("ProApps Quicktime Codecs") that is recommended for the FCP X, Motion 5 and Compressor 4.  Should FCP 7/FCS 3 Users download this update as well, or avoid to prevent any conflicts?

    I have one boot drive with 10.6.8 and FCS 3, and a 2nd boot drive with 10.9 and the FCP X Trial - best to avoid any problems.  Everything is smooth as glass at the moment.

  • Does motion 5 and compressor come with FCPX purchase?

    Does motion 5 and compressor come with FCPX purchase? Is there somewhere that you can buy this in a package if so?

    NNo. there seoarate applications. You want them? Buy them.

  • My iPhone4 with iOS7 suddenly gone dead. Doesn't turn on no matter what is done. I tried connecting to iTunes and try to sync but the De4vices tab remains grayed.

    My iPhone4 with iOS7 was working fine. Suddenly and spontaneously it had gone dead.Neithr was it ever dropped down nor any fluid spilled. It doesn't turn on no matter what is done. I tried syncing with iTunes  but the Devices tab in the iTunes remains grayed. It means it doesn't recognise. What shall I do?

    No, No, it was not a question of drained battery. I charged iphone overnight and it was charged to 100%. Hardly 2-3% would have got spent before it had gone dead.Gving benefit of doubt of drained battery, I indeed allowed it by connecting to USB for nearly 10 mts before I  pressed the on button. But it was of no avail.
    I searched for suggestions and followed the tip given in the forum. I kept both the home button and the wake up/sleep button pressed for 20 sec. The apple icon appeared and booted. Thanks.

Maybe you are looking for