Motion and gesture aren't smooth

how to fix if the motion and gesture are not smooth anymore on my macbook?

Restart your Mac.
And clean the trackpad > How to clean Apple products

Similar Messages

Hazel Motion and gesture gaming

Does Hazel support Motion and gesture gaming?
I tried but always give Failed message!

According to the SE specifications for the Hazel, these features are not supported.

Where is the motion and gestures on lenovo K3 note

Is there a way to disable all gestures settings on lenovo k3 note i need to disable mute/pause

I ordered 2 k3 notes from same supplier On the same order , came with different ROMS one has character settings the other doesn't which is a pain .

Photos with motion and transitions have jerky intros and fades

Most of the time when I add a Ken Burns type motion to a photo and then as a transition or several, the playback has little hiccups in it at the start or end of the transition. I render the project and it's still there but not on every singe one. What is this? Sometimes I can fix it by re-motioning the image but that is soooo time consuming. This is simple stuff it should be smooth.

Hi -
It sounds like you are editing a photo to the timeline, programing your Ken Burns move, and then adding transitions to and from this clip.
If that is the case, you must remember that adding a transition can use portions of the clip that proceed the in point of the clip, and follow the out point of the clip to make the transitions. So if you are commencing your move at the cut point, and you add, for example a Centered 30 frame dissolve at the cut to the clip, when the dissolve commences you will see 15 frames of the clip static, then clip going in to motion and starting the Ken Burns move you made.
The same is true on the out point of the clip - you will need to keyframe the move in such a way that the motion continues throughout the duration of the transition you intend to use.
Hope this helps.

Motion and Text, I am so frustrated

Hi, this is the second time, I'm trying to to a project in Motion and not in AFX. But yet again motion dissapoints me. The first time it was the outline bug, that cuts of the outline... really bad, but this time around it is the displaying/rendering of international characters...
The funny part is: the same font, works in TextEdit, Keynote, Pages, and FCP with Boris text... but motion, cuts of the right most part of the letter Å.
sincerely Helge
http://files.me.com/helgetjelta/juotze
http://files.me.com/helgetjelta/juotze
Message was edited by: Helge Tjelta

They are not in the purchased in iTunes anymore for some reason. But I can search it and re download it that way
Are you sure these aren't two different things and that you aren't repurchasing them rather than redowloading them at no charge.
Can you confirm which purchased list you are looking in, the purchased playlist in iTunes or the purchased list in the iTunes Store through Quicklinks in iTunes.

Slow motion and speedup during a single clip

Is there a way to take a single clip, and slow down portions of the clip, while speeding up other portions of the clip.
Is there a way to adjust playback speed using keyframes I guess is my basic question, so the start of the clip is slow motion, then the middle is played back at an accelerated or normal rate, then the end of the clip becomes slow motion again.
-Roger

Yes, is the short answer. Using the time remapping feature in the "effects" panel (top center of the screen, second tab from the left) you can set certain portions of the clip to play back at normal speed, then slow it down in certain sections, and then speed it back up. You can also cut the clip using the razor tool (in the tools panel at bottom right of the screen) and just reduce the speed of that section of the clip. The downside to using the time remapping (if my memory serves me - don't take my word for it) is that you lose audio, but the transitions from normal to slow-mo and back are much smoother. Using the razor tool, you simply place the timeline indicator where you would like to begin the slow motion segment, then cut the clip with the razor tool, the repeat the process where you want the slow-mo section to end. Then, select the section that you want to play back in slow motion, and reduce the speed. This is the method that was used before the time remapping feature was available. The transitions are not at smooth, but you can keep audio for the sections where the speed isn't modified. Just be sure to select the "ripple edit" check box when you modify the speed/duration setting of the clip (right click the video clip to get the speed/duration setting dialog box).

"Motion and Compressor Will Not Open Because Of A Problem"?

Last week I installed FCS 3 on my iMac and everything appeared to work OK.
However, as my iMac had been cluttered with rubbish for 2 years I erased the Hard Drive and reinstalled OSX 10.6.3 together with all FCS 3.
I have only used FCP and STP since then but today I discovered that Motion and Compressor "will not open because of a problem".
Here are the reports where it appears that in both cases the "Dyld Error Message", whatever that is, reports that "Library not loaded etc. etc."
Incidentally there are mentions of 14 and 18 crashes since last reports. This is ridiculous as I have only just tried to open them 3 or 4 times in the last 5 minutes . . . . and the computer OS and apps are all freshly installed.
Process: Motion [578]
Path: /Applications/Motion.app/Contents/MacOS/Motion
Identifier: com.apple.motion
Version: ??? (???)
Build Info: Motion-6870000~22
Code Type: X86 (Native)
Parent Process: launchd [98]
Date/Time: 2010-05-21 15:45:02.265 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 148993 sec
Crashes Since Last Report: 14
Per-App Crashes Since Last Report: 2
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
Reason: image not found
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown
Process: Compressor [629]
Path: /Applications/Compressor.app/Contents/MacOS/Compressor
Identifier: com.apple.compressor.Compressor
Version: ??? (???)
Build Info: Compressor-3015328~22
Code Type: X86 (Native)
Parent Process: launchd [98]
Date/Time: 2010-05-21 15:52:33.008 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 149440 sec
Crashes Since Last Report: 18
Per-App Crashes Since Last Report: 6
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/StompTypes.frame work/Versions/A/StompTypes
Reason: image not found
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown

As I was installing Motion from a backup disk image, I thought maybe the .dmg was corrupt, so after deleting again I put the original DVD in and reinstalled.
However, it still won't open and the crash report seems a little different:-
Process: Motion [783]
Path: /Applications/Motion.app/Contents/MacOS/Motion
Identifier: com.apple.motion
Version: 4.0.0 (687)
Build Info: Motion-6870000~22
Code Type: X86 (Native)
Parent Process: launchd [131]
Date/Time: 2010-05-21 17:44:14.127 +0100
OS Version: Mac OS X 10.6.3 (10D578)
Report Version: 6
Interval Since Last Report: 153737 sec
Crashes Since Last Report: 27
Per-App Interval Since Last Report: 218 sec
Per-App Crashes Since Last Report: 4
Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __ZN14LiSimpleCamera15setDOFDepthModeEi
Referenced from: /Library/Application Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Versions/A/Ozone
Expected in: /Library/Application Support/ProApps/SharedA/Frameworks/Lithium.framework/Versions/A/Lithium
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
FireWire Device: unknown_device, Unknown

Is there a way to run Motion and Final Cut Pro on Separate Machines?

Is there a way to run Motion and Final Cut Pro from the same Final Cut Studio license on separate machines? We hadn't realised when we bought Final Cut Studio that it wouldn't allow this. Our editor doesn't use motion, and while I mainly use After Effects on our motion graphics machine, I was wanting to try using motion for some particle effects. Unfortunately, it won't let me open it while Final Cut is running on our editor's machine. I can understand not letting two copies of same application run under the same serial number at the same time, but it would be nice to be able to use both programs that we own concurrently. At very least it would be good to warn you that this isn't possible in the product description, not in some fine print license agreement once you have already bought the software.
-Matt

I do not know of any software, in any platform that can operate from the same license over a network simultaneously.This is the exact reason for the existence of Volume Licensing. If for example a project ran in each one of the included applications from different sources that were not an active network, I doubt you would have a problem.Like, doing a project at work and geting the outcome with the Powerbook at home...Sorta!

Is there a way to detect motion and set markers automatically?

My video includes walking around with the camera. I walk, then stop and hold the camera in one area, then pan, then continue walking (and repeat).
While panning, there is some annoying flicker of vertical objects (beams, poles, whatever). I can use a horizontal fast blur to fix this, but I only want the blur applied when there is panning (not when the camera is relatively still). Doing it manually is cumbersome.
Is there a way to detect when motion is going on (over a certain threshold)? I would like PP to tell me when there is significant motion, and place markers in the points where it begins and ends (when motion goes over a threshold and then when it falls below the threshold).
Thanks, experts!

One thing you can try is to bring your footage into Prelude - it will lay out the entire clip so you can see thumbnail snapshots for the whole clip at once - that might give you a good start to see where there is a lot of motion. Then, you can add markers very easily at all of those points - and when you send it over to Premiere, the markers will show up on your clip.
Not automated, but a good workflow to achieve what you are looking for.

Can u help me please: ios 5 and 6 aren't working i prefer 5 over 6 cause when i updated both ipod touch 4 and my pc itunes to ios 6 it freezes and crashes on both and in app store as well as music library and when playing music it repeatssticksawfulbeeps

i liked ios 5 better but still had problems but now since i updated to ios 6 on both my pc itunes and ipod touch 4 my music library glithches freezes skips crashes sticks repeats when i play my music and it's unbearable especially since i'm a huge adele fan and can't listen to her wonderful voice properly and i'm experiencing problems syncing my ipod touch and when i connect to the app store on my ipod touch it always crashes and i can't connect to download new apps the only problems i had with ios 5 was sometimes when i use safari on my ipod touch it would occasionally crash but i would rather revert back to ios 5 than be stuck with ios 6 please fix this or revert the software please i'm frustrated and want this resolved and ios 6 is the worst software update i have ever had.
thank you

For the App store crashing see:
IOS 6 App store crash: Apple Support Communities
For othe other problems try:
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.

Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

Itunes doesn't list all of my recent podcasts. My show is Black Tribbles and it only shows episodes through March 2013, however we do at least two shows a week and they aren't listed. The feed works because the show update to my computer. Help please.

Your feed is at http://blacktribbles.podomatic.com/rss2.xml
When subscribed to in iTunes the recent episodes show, but the Store hasn't updated for some time.
There appears to be an issue with the feed. In the episode 'WRESTLING MARCH MADNESS: Final Bracket & Championship' of 31st March you will find in the 'description' tag the following line:
4. KURT ANGLE
At the end of this line is an invisible character which seems to be wrecking the feed - although it works OK when suscribing in iTunes it won't load in a browser (and I also found the feed very slow to load, which won't help matters with the Store)
This sort of thing usually happens when you paste text in from a word processing application and manage to include one of the invisible control characters. I don't know how easy it will be do do it in Podomatic but you should delete that entire line and retype it to remove this charter.
You should keep an eye on the time it takes the feed to be accessed - if there is a long enough delay (and it was quite some seconds when I tried) the Store may well timeout and fail to read it. At the moment it's showing a cached version from the last time it was able to read it.

HT201272 I purchased audio books from Itunes and they aren't showing up on my purchased list? So now I can't download them to my new computer. Any suggestions?

I purchased audio books from Itunes and they aren't showing up on the purchased list so I can't down load them to my new computer. I have authorized my computer. So any suggestions?

You cannot redownload audiobooks at all.
They will only be where you put them.

My iPhone and iPad aren't detected by iTunes but iPod classic syncs

My iPhone and iPad aren't detected by iTunes but iPod classic syncs. I have re-installed iTunes, reset devices etc. The iPad and iPhone charges through the computer and Windows 8 recognises them.

Hi Vlismas,
Welcome to the Support Communities!
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
I hope this information helps ....
- Judy

Adobe photoshop and illustrator aren't opening; Adobe Application Manager required but I already have application manager?

My adobe photoshop and illustrator aren't opening; this message appears "Adobe Application Manager, required to start your trial, is missing or damaged." even though I already have application manager? help please
I am using MAC OS
ps: I already tried these solutions and none of them have worked
-delete adobe manager and download it again
-use the adobe cleaning tool
-delete photoshop and illustrator and re download them
-updated my OS

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Motion and Field Order Stupidness

I'll try not to rant too much.
But what is up with Motion and working with DV NTSC video with fields? I have had nothing but headaches. I am a long time After Effects user, and I was glad to get Motion 2 (2.1.2), but I've just spent the last hour and half trying to get it to render DV NTSC video correctly without it getting field jitter on a project that needed to be over-nighted to go on the air. And it still doesn't look totally correct. (I'm not a happy camper)
Here's the deal, I took DV captured footage from FCP using the standard DV/DVCPRO - NTSC preset I've used forever. That footage was imported into a Motion project that was using its own NTSC DV project preset (all lower fields -even). But every time I'd play it back in Motion, or render it out (still using the NTSC DV render preset), I get serious field jitter on DV output.
Eventually I found under the Inspector-Media tabs that the footage was imported as Field Order- None (why I have not a clue). So I changed all the footage to Lower (even). That worked on any footage where size, rotation, or position was not changed. If any of those attributes was changed I get the field order jitter. It seems to me that Motion is not able to render out field ordered video properly and the quality looks poor or jittery.
Now that might seem hasty to say that, but I've been doing the same thing in AE for years, never having to change the imported field order to get it to look right and I have always captured, imported, work with projects and rendered using the QT DV/DVCPRO - NTSC presets.
Can someone help me because I can not believe I've had to change so many setting to try to get video to look right from Motion while using the same settings during the entire workflow.
Thanks, and sorry for the rant.
PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4 Mac OS X (10.4.7)

Hey, thanks for the replys.
[....you might want to try using the animation codec..millions of colors...]
I gave that a shot this morning, and I'm having the same problem. See what's going on now is after changing the Field Order to even for the footage media, all of it looks decent except for the ones on an angle, croped or resized and I see this in both Motion's preview and the final render when I play it back in FCP. So as per your suggestion I rendered with the animation codec (filed rendering) and it still has it. Its just odd to me that it does that, like I said before I've worked in the DV/DVCPRO - NTSC codec with FCP and AE for years with no quality degrade. The reason I have always do that is that's what I capture to and that what my FCP project is so to keep it all consistant. BTW, this is going network and cable, no different than I usually do.
[...are you enabling field rendering in the Canvas or in the export settings?]
Yes I am, sorry, I should have pointed that out. I have done combinations of different QT codecs with and without field rendering turned on to see different results. None of course resolves this issue.
Thanks
PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4 Mac OS X (10.4.7)

Motion and gesture aren't smooth

Similar Messages

Maybe you are looking for