Motion and Typography

I am making a little kinetic typography project and am stuck. I am trying to make it so I zoom in on the dot of an i, so the dot of the i creates a new scene, but Motion doesn't seem to be able to that, or I am doing it incorrectly. First I just tried to scale the text up but it reaches a resolution that is too big for Motion to handle, 4096x4096 I think.
I then tried to just zoom the camera in to the i but it did not work out. Then I tried a mix of both, half zoom then half scale up the text so it wouldnt hit the max resolution. That failed as well.
Any ideas of how this issue could be overcome?
I was also wandering how about the capabilities of motion with this type motion graphics. Is Motion capable of pulling off a project such as this(http://ca.youtube.com/watch?v=FLyGaqdf69c)? I know AE can, but am wondering if Motion is able to do this as well. Any input would be grateful, thanks.

You should certainly be able to to this.
Make the dot of the i a separate image (either a period or a circle shape) and center the anchor point.
With the dot selected, F will frame it with the camera. Do this with recording turned on at the point you want to be zoom in on the dot. Then just move the camera closer on the Z-axis to fill the canvas with the dot.

Similar Messages

  • "Motion and Compressor Will Not Open Because Of A Problem"?

    Last week I installed FCS 3 on my iMac and everything appeared to work OK.
    However, as my iMac had been cluttered with rubbish for 2 years I erased the Hard Drive and reinstalled OSX 10.6.3 together with all FCS 3.
    I have only used FCP and STP since then but today I discovered that Motion and Compressor "will not open because of a problem".
    Here are the reports where it appears that in both cases the "Dyld Error Message", whatever that is, reports that "Library not loaded etc. etc."
    Incidentally there are mentions of 14 and 18 crashes since last reports. This is ridiculous as I have only just tried to open them 3 or 4 times in the last 5 minutes . . . . and the computer OS and apps are all freshly installed.
    Process: Motion [578]
    Path: /Applications/Motion.app/Contents/MacOS/Motion
    Identifier: com.apple.motion
    Version: ??? (???)
    Build Info: Motion-6870000~22
    Code Type: X86 (Native)
    Parent Process: launchd [98]
    Date/Time: 2010-05-21 15:45:02.265 +0100
    OS Version: Mac OS X 10.6.3 (10D578)
    Report Version: 6
    Interval Since Last Report: 148993 sec
    Crashes Since Last Report: 14
    Per-App Crashes Since Last Report: 2
    Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
    Referenced from: /Applications/Motion.app/Contents/MacOS/Motion
    Reason: image not found
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
    Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
    Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-875
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
    USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
    USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
    USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    FireWire Device: unknown_device, Unknown
    Process: Compressor [629]
    Path: /Applications/Compressor.app/Contents/MacOS/Compressor
    Identifier: com.apple.compressor.Compressor
    Version: ??? (???)
    Build Info: Compressor-3015328~22
    Code Type: X86 (Native)
    Parent Process: launchd [98]
    Date/Time: 2010-05-21 15:52:33.008 +0100
    OS Version: Mac OS X 10.6.3 (10D578)
    Report Version: 6
    Interval Since Last Report: 149440 sec
    Crashes Since Last Report: 18
    Per-App Crashes Since Last Report: 6
    Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
    Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/StompTypes.frame work/Versions/A/StompTypes
    Reason: image not found
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
    Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
    Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-875
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
    USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
    USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
    USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    FireWire Device: unknown_device, Unknown

    As I was installing Motion from a backup disk image, I thought maybe the .dmg was corrupt, so after deleting again I put the original DVD in and reinstalled.
    However, it still won't open and the crash report seems a little different:-
    Process: Motion [783]
    Path: /Applications/Motion.app/Contents/MacOS/Motion
    Identifier: com.apple.motion
    Version: 4.0.0 (687)
    Build Info: Motion-6870000~22
    Code Type: X86 (Native)
    Parent Process: launchd [131]
    Date/Time: 2010-05-21 17:44:14.127 +0100
    OS Version: Mac OS X 10.6.3 (10D578)
    Report Version: 6
    Interval Since Last Report: 153737 sec
    Crashes Since Last Report: 27
    Per-App Interval Since Last Report: 218 sec
    Per-App Crashes Since Last Report: 4
    Anonymous UUID: F0E0573A-9AA1-463D-95B1-A136E901F272
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Symbol not found: __ZN14LiSimpleCamera15setDOFDepthModeEi
    Referenced from: /Library/Application Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Versions/A/Ozone
    Expected in: /Library/Application Support/ProApps/SharedA/Frameworks/Lithium.framework/Versions/A/Lithium
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
    Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.27)
    Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40VWA0, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R UJ-875
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa400000
    USB Device: Hub, 0x04b4 (Cypress Semiconductor), 0x6560, 0xfa200000
    USB Device: External HD, 0x059b (Iomega Corporation), 0x0370, 0xfa240000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfd100000
    USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd130000
    USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0xfd120000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BCM2045B2, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    FireWire Device: unknown_device, Unknown

  • Is there a way to run Motion and Final Cut Pro on Separate Machines?

    Is there a way to run Motion and Final Cut Pro from the same Final Cut Studio license on separate machines? We hadn't realised when we bought Final Cut Studio that it wouldn't allow this. Our editor doesn't use motion, and while I mainly use After Effects on our motion graphics machine, I was wanting to try using motion for some particle effects. Unfortunately, it won't let me open it while Final Cut is running on our editor's machine. I can understand not letting two copies of same application run under the same serial number at the same time, but it would be nice to be able to use both programs that we own concurrently. At very least it would be good to warn you that this isn't possible in the product description, not in some fine print license agreement once you have already bought the software.
    -Matt

    I do not know of any software, in any platform that can operate from the same license over a network simultaneously.This is the exact reason for the existence of Volume Licensing. If for example a project ran in each one of the included applications from different sources that were not an active network, I doubt you would have a problem.Like, doing a project at work and geting the outcome with the Powerbook at home...Sorta!

  • Is there a way to detect motion and set markers automatically?

    My video includes walking around with the camera.  I walk, then stop and hold the camera in one area, then pan, then continue walking (and repeat). 
    While panning, there is some annoying flicker of vertical objects (beams, poles, whatever).  I can use a horizontal fast blur to fix this, but I only want the blur applied when there is panning (not when the camera is relatively still).  Doing it manually is cumbersome.
    Is there a way to detect when motion is going on (over a certain threshold)?  I would like PP to tell me when there is significant motion, and place markers in the points where it begins and ends (when motion goes over a threshold and then when it falls below the threshold).
    Thanks, experts!

    One thing you can try is to bring your footage into Prelude - it will lay out the entire clip so you can see thumbnail snapshots for the whole clip at once - that might give you a good start to see where there is a lot of motion.  Then, you can add markers very easily at all of those points - and when you send it over to Premiere, the markers will show up on your clip. 
    Not automated, but a good workflow to achieve what you are looking for.

  • Motion and Field Order Stupidness

    I'll try not to rant too much.
    But what is up with Motion and working with DV NTSC video with fields? I have had nothing but headaches. I am a long time After Effects user, and I was glad to get Motion 2 (2.1.2), but I've just spent the last hour and half trying to get it to render DV NTSC video correctly without it getting field jitter on a project that needed to be over-nighted to go on the air. And it still doesn't look totally correct. (I'm not a happy camper)
    Here's the deal, I took DV captured footage from FCP using the standard DV/DVCPRO - NTSC preset I've used forever. That footage was imported into a Motion project that was using its own NTSC DV project preset (all lower fields -even). But every time I'd play it back in Motion, or render it out (still using the NTSC DV render preset), I get serious field jitter on DV output.
    Eventually I found under the Inspector-Media tabs that the footage was imported as Field Order- None (why I have not a clue). So I changed all the footage to Lower (even). That worked on any footage where size, rotation, or position was not changed. If any of those attributes was changed I get the field order jitter. It seems to me that Motion is not able to render out field ordered video properly and the quality looks poor or jittery.
    Now that might seem hasty to say that, but I've been doing the same thing in AE for years, never having to change the imported field order to get it to look right and I have always captured, imported, work with projects and rendered using the QT DV/DVCPRO - NTSC presets.
    Can someone help me because I can not believe I've had to change so many setting to try to get video to look right from Motion while using the same settings during the entire workflow.
    Thanks, and sorry for the rant.
    PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4   Mac OS X (10.4.7)  

    Hey, thanks for the replys.
    [....you might want to try using the animation codec..millions of colors...]
    I gave that a shot this morning, and I'm having the same problem. See what's going on now is after changing the Field Order to even for the footage media, all of it looks decent except for the ones on an angle, croped or resized and I see this in both Motion's preview and the final render when I play it back in FCP. So as per your suggestion I rendered with the animation codec (filed rendering) and it still has it. Its just odd to me that it does that, like I said before I've worked in the DV/DVCPRO - NTSC codec with FCP and AE for years with no quality degrade. The reason I have always do that is that's what I capture to and that what my FCP project is so to keep it all consistant. BTW, this is going network and cable, no different than I usually do.
    [...are you enabling field rendering in the Canvas or in the export settings?]
    Yes I am, sorry, I should have pointed that out. I have done combinations of different QT codecs with and without field rendering turned on to see different results. None of course resolves this issue.
    Thanks
    PowerMac Dual 2.0 G5, PowerMac Dual 1.42 G4, iBook 800 G3, Mac mini 1.42 G4   Mac OS X (10.4.7)  

  • Motion and Final Cut Pro Problem

    I recently updated my computer and went with the new Quad-Core Mac. I had to reload the Final Cut Pro Studio software, and I've got a problem that is vexing me to no end.
    I can import a Motion template (one that I've designed and even the Apple produced templates), but I try to view it in Viewer or when I place the Motion template on the timeline it won't work. Nothing visible on either the Viewer or the Canvas when I try to playback. I can right click and open the template in Motion and have the elements appear and work properly, but nada once it comes back into Final Cut.
    What gives?
    John

    I find the roundtrip to Motion to be less than useful when there are a lot of layers involved. What works better for me is to export a movie using the same settings you're using in FCP and then import that. If the settings in Motion match the FCP settings, no rendering should be required. Unfortunately, you can't then use the "open in editor" function to fix anything... but must reopen the Motion project and export again.

  • When i install the new os my fcp,motion and many adobe software not working so please help me out.

    when i install the new os my fcp,motion and many adobe software not working so please help me out.
    there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.

    You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
    It would also be nice if you could include which model MacBook Air you're using.
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Working with Motion and FCP 6

    I have some footage of a presenter reading the news and i need to know the best way to create a lower third caption in Motion and incorporating it into my movie in FCP.
    So far i have created my lower third caption in Motion and then saved it as a template, when in FCP i then open the template and drag it into the timeline, but it was trial and error getting the lower third to position at the right place on the footage.
    Is there a better way ? should i edit my footage then export to motion and creae the lower third over the footage ?
    Help
    Hillster

    Do not worry, while you gain more experience in editing and motion graphics this non-issue will gradually disappear.
    However, there are several things you can try within FCP, one is to toggle on Image+Wireframe (FCP main menu>view) and swiftly reposition your lower third as you wish in the canvas by dragging the image center.
    g.

  • Workflow Qs: Using LT, Motion and FCP!

    Hi, getting all jumbled up on workflow. I am inserting motion projects direct on the timeline, but I want livetype titling in this project as well - the titles are part of the motion animation. I don't see where i can save a livetype style I have set up there to just use in Motion, nor a sendto click. What do I have to do to make the composite? Thanks!
    Bonus Question:
    I also need to creat this effect:
    http://www.livetypecentral.com/cgi-bin/livetypecentral.cgi/scan/MM=463acda593e91 b3da84375f256e196d2:10:15:10?mvsession_id=cxr46APv&mv_pc=31&mv_more_ip=1&mvnextpage=tutorials
    Creating a Chalkboard Effect
    How to create a Chalkboard effect with text that writes on the board and is then removed with an eraser! Click the image to watch this tutorial.
    BUT, we can't afford 99$ nor do we have credit cards in Nepal to order. Can anyone tell me if this is possible to recreate by hand just using Motion and LiveType? Thanks,
    Coocoo

    coocooforcocoapuffs wrote:
    I want livetype titling in this project as well - the titles are part of the motion animation. I don't see where i can save a livetype style I have set up there to just use in Motion, nor a sendto click. What do I have to do to make the composite? Thanks!
    Import the LiveType project file as you would import it into FCP. However, my advice is to render the LT movie and bring the movie into the Motion project. You will save tons of processing and be able to edit your Motion project much faster. Try not to get hung up on precision with the LT stuff. In fact, I'd use proxies for the LT files with the simplest settings and minimum effects until you are much further along.
    Most of LiveType's effects can be easily emulated within Motion.
    coocooforcocoapuffs wrote:
    Bonus Question:
    I also need to creat this effect:
    How to create a Chalkboard effect with text
    BUT, we can't afford 99$ nor do we have credit cards in Nepal to order. Can anyone tell me if this is possible to recreate by hand just using Motion and LiveType? Thanks,
    Coocoo
    The economics of effects are usually grossly misunderstood by cheapskates. The effort you will expend in faking this effect will cost you far more than simply buying it. Credit cards are not the issue, you can make this purchase in many ways, use your imagination.
    Find a bold typeface that you like. Apply any noise filter to a matte as a still image to create an alpha mask that will give some chalkboard texture to the text by removing some of the pixels. The same noise matte can be offset slightly and blended using ADD to give you some bright chalk highlights. You create the eraser effect using the paint function in Motion or buy using a grayscale and a procedural or gradient wipe. There is an eraser object in the Content of Motion. Animating the onscreen movement of the eraser and the eraser matte is challenging but a fun exercise in learning Motion's advanced functions. A chalkboard is a dangerously primitive anachronism. Be sure the metaphor is appropriate to your communication goal and not just some silly effect your creative manager insists on using.
    bogiesan

  • Why is it in the Apple store in Fresno, Ca there are no scheduled one on one sessions in Aperture, Iphoto, Pages, motion, and several other programs. I purchased two for $200.00 and wonder what's happening

    1. I've purchased two one on one training cards in the Fresno Apple Store.
    2. For the past week and a half I've tried to schedule a personal or group in Aperture, Imovie, motion and the schedule shows to future times.
    3. What is going on that I cannot receive training in any of this popular topics. WHAT'S GOING ON?

    Hi,
    You've posted your question on the Apple-sponsored user-to-user discussion forum for Aperture.  Apple prepares for us this little clearing in the orchard, but otherwise is not here.  Your questions should be addressed to the Fresno Apple Store personnel.

  • Photos with motion and transitions have jerky intros and fades

    Most of the time when I add a Ken Burns type motion to a photo and then as a transition or several, the playback has little hiccups in it at the start or end of the transition. I render the project and it's still there but not on every singe one. What is this? Sometimes I can fix it by re-motioning the image but that is soooo time consuming. This is simple stuff it should be smooth.

    Hi -
    It sounds like you are editing a photo to the timeline, programing your Ken Burns move, and then adding transitions to and from this clip.
    If that is the case, you must remember that adding a transition can use portions of the clip that proceed the in point of the clip, and follow the out point of the clip to make the transitions. So if you are commencing your move at the cut point, and you add, for example a Centered 30 frame dissolve at the cut to the clip, when the dissolve commences you will see 15 frames of the clip static, then clip going in to motion and starting the Ken Burns move you made.
    The same is true on the out point of the clip - you will need to keyframe the move in such a way that the motion continues throughout the duration of the transition you intend to use.
    Hope this helps.

  • Motion and Imac for Short Videos (5 min or less)

    I am going to produce short videos for streaming on the web. They should not be over 5 min.
    I have decided to buy Final Cut Pro Suite and a new computer. Of course I want the best setup for the least amount of money. (for my needs).
    I have read other posts on this topic. I know that the ideal setup is to configure a Mac Pro (and spend upwards of $4,500.)
    Question is: will Motion work on 2.8GHz Intel Core 2 Extreme
    2GB memory
    500GB hard drive1
    8x double-layer SuperDrive
    ATI Radeon HD 2600 PRO with 256MB memory
    ( I can add 2 additional GB of Memory and buy and external Scratch disk).
    I just want to know if its possible to use Motion with this setup (or Final Cut at all) to make these short podcast videos.
    Thanks All!

    I have a 2.3ghz dual core G5 and 1.5 gigs of RAM and Motion and Final Cut and all the apps that come with it work just fine. Additional RAM will help with some of the more intense actions- I find that using the color correction 3-way in Final Cut is excruciating. I'm also using FCS1 and hear Color (in FCS2) is RAM intensive. I have used FCS2 on someone else's G5 and it worked fine. Lots of people even use FCP on MacBook Pros.
    What I'm saying is- I don't see any reason why it wouldn't, but if you have a nearby Apple Store, I'd ask one of the Geniuses there. Of course, you should always check the requirements on the software box before buying.

  • Acquire encoder position with Motion and DAQ

    Hi,
    I am trying to acquire an encoder position with Motion. It seems impossible to set the frequency of the acquisition with Motion and I must poll for the position in a do-while loop.
    I have read in a lot of threads that one can use RTSI lines to retrieve encoder position with a DAQ Board though it is acquired with a Motion board. But there are no examples at all about this.
    To sum up, I need to send Encoder Phase A to RTSI0, Encoder PhaseB to RTSI1 (which I already do), retrieve info with a DAQ device and then calculate rpm.
    Christophe
    PS: please don't answer with measure angular position.vi or explain me in what this Vi can help me

    Hi Christophe,
    I'm not sure I understood well what you need. You have the angular position and you need to know the timing, am I right? Can you use an other counter on your card to get the period (or the frequency) of your signal? From that, I think you should be able to calculate the velocity.
    I hope this helps,
    Charlotte F. | CLAD
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> "Du 11 octobre au 17 novembre, 2 sessions en parallèle : bien démarrer - approfondir vos connais...

  • Motion and Text, I am so frustrated

    Hi, this is the second time, I'm trying to to a project in Motion and not in AFX. But yet again motion dissapoints me. The first time it was the outline bug, that cuts of the outline... really bad, but this time around it is the displaying/rendering of international characters...
    The funny part is: the same font, works in TextEdit, Keynote, Pages, and FCP with Boris text... but motion, cuts of the right most part of the letter Å.
    sincerely Helge
    http://files.me.com/helgetjelta/juotze
    http://files.me.com/helgetjelta/juotze
    Message was edited by: Helge Tjelta

    They are not in the purchased in iTunes anymore for some reason. But I can search it and re download it that way
    Are you sure these aren't two different things and that you aren't repurchasing them rather than redowloading them at no charge.
    Can you confirm which purchased list you are looking in, the purchased playlist in iTunes or the purchased list in the iTunes Store through Quicklinks in iTunes.

  • I just upgraded ITUNES (11.0.4). When trying to sync my Mac Air to my iPad, the screen and typography sections appear in black

    I just upgraded ITUNES (11.0.4). When trying to sync my Mac Air to my iPad, the screen and typography sections appear in black

    This is a copy of my screen:
    Thanks,

Maybe you are looking for