Motion asking for registration info at launch

Over the past few days, when I launch Motion 4, it asks for my registration/serial info as if it was the first time I launched Motion.
Anyone experience this and have a fix?

I'd go to /Library/Application Support/Final Cut Studio/ and remove the Final Cut Studio System ID...
You'll have to enter your serial and registration info, but then it's done. Or at least it's fixed this problem before...
post back,
Patrick

Similar Messages

  • Homesite keeps asking for registration information

    I have been using Homesite 5.5 for several years.  I was using it successfully in Windows 7, 64 bit.  I recently upgraded my desktop to Windows 8, 64 bit, and when I went to use Homesite for the first time since the upgrade, it asked for my registration information, including serial number, as if it hadn't been registered.  After I entered it, it asked for the serial number of the program I had upgraded from, which I also entered.  It then brought up the registration screen again, followed by the previous serial number screen, etc.  After going through this three or four times, I was finally able to get into the program, but after I closed the program and tried to open it again, the same thing happened.  Even though I have Dreamweaver (and the entire CS 5 Design Premium suite), I prefer to use Homesite, and want to find out how to get it functional again.  I assume this is something to do with the registry, but have no idea how to fix it.  Any suggestions would be appreciated.

    Hey Folks, I think I have found a solution - even if I cannot prove if it can be reproduced on any other machine:
    After having the same Problem I tried several workarounds - and suddenly one crazy idea I had worked out:
    Run Homesite under "compatibility mode"***
    Enter registration information
    Homesite will run - but most of the menu bars won't appear. Don't mind: compatibility mode was only necessary once to remember the registration information...
    Close Homesite and switch back to normal mode
    Homesite will start and stop asking for registration info...
    This worked well on my Windows 8.1 Pro 64 Bit System - I hope, it works well with all your Systems too! Homesite is such a perfect simple editor and I'd badly miss it if it would not run on my system...
    *** For compatibility mode:
    Open the Homesite program folder in Explorer and look for Homesite.exe
    Right click on homesite.exe --> properties
    Select "compatibilty mode"*
    * I am using a German Windows and am not quite sure, if "compatibility mode" is the correct translation into English. If not, look for something similar...
    Good luck to all of you Homesite-Lovers!

  • I purchased DreamweaverCS6, installed ok then registered it on-line. Computer   running slow, malware sorted it out, since I re installed CS6, it asks for   registration, puts up 30 day trial,Flags up errors java.

    I purchased Dreamweaver CS6, installed ok then registered it on-line. Computer
    running slow, malware sorted it out, since I re installed CS6, it asks for
    registration, puts up 30 day trial,Flags up errors java.

    Hi Jon,
    Dreamweaver the following errors show up in the JavaScript.Log. I deleted the .dat file but no difference. I am not so confident in how to delete the preference file. I have been following the instructions (see link)
    https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    Windows:
    ~Users\[user name]\AppData\Roaming\Adobe\Dreamweaver CC 2014.1 (folder)
    \HKEY_CURRENT_USER\Software\Adobe\Dreamweaver CC 2014.1 (registry entry)
    When Dreamweaver launches, it creates new preferences files and folder.
    How do I get rid of these errors?
                                            DW JavaScript
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\MMinit.htm
         lineno: 1698
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\AdvRs.htm
         lineno: 12
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\BridgeTalkInit.htm
         lineno: 19
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\BusinessCatalyst.htm
         lineno: 46
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\ICEInit.htm
         lineno: 57
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\RecordsetFind.htm
         lineno: 12
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Startup\SpryInit.htm
         lineno: 53
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP.NET_Csharp.htm
         lineno: 436
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP.NET_VB.htm
         lineno: 477
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP_JS.htm
         lineno: 622
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ASP_VBS.htm
         lineno: 624
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\ColdFusion.htm
         lineno: 458
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\JSP.htm
         lineno: 491
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\PHP_MySQL.htm
         lineno: 384
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\ServerModels\XSLT.htm
         lineno: 302
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename:
         lineno: 15
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename:
         lineno: 15
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename:
         lineno: 14
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Commands\_onOpen.htm
         lineno: 29
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Menus\MM\LiveView.htm
         lineno: 32
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Menus\MM\Browser_Controls.htm
         lineno: 31
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\AddressURL.htm
         lineno: 14
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\BCC.htm
         lineno: 32
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\WrapTag.htm
         lineno: 45
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Toolbars\MM\EditTitle.htm
         lineno: 39
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Shutdown\BridgeTalkexit.html
         lineno: 18
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    JS Error:
         missing ; before statement
         filename: C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Shutdown\TeamAdminTempDelete.html
         lineno: 37
         line: Set FSO = CreateObject("Scripting.FileSystemObject")
         at: FSO = CreateObject("Scripting.FileSystemObject")
    Original message----
    From : [email protected]
    Date : 31/03/2015 - 16:08 (GMTDT)
    To : [email protected]
    Subject :  I purchased DreamweaverCS6, installed ok then registered it on-line. Computer   running slow, malware sorted it out, since I re installed CS6, it asks for   registration, puts up 30 day trial,Flags up errors java.
        I purchased DreamweaverCS6, installed ok then registered it on-line. Computer   running slow, malware sorted it out, since I re installed CS6, it asks for   registration, puts up 30 day trial,Flags up errors java.
        created by Jon Fritz II in Dreamweaver support forum - View the full discussion
    Try renaming the configuration folder that holds the .dat file first, before attempting to restore preferences.
    Many times that will take care of it without having to do all the work required after a pref-reset.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7391793#7391793 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7391793#7391793
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Dreamweaver support forum by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Why won't App Store let me download free apps it asks for billing info?

    It asks for my billing info when downloading a free app and there's no way I can sort it out it shouldn't ask for billing info if it's free!!!!!!!!

    Is this a new account, and if so how did you create it ? If it is new then unless you follow the instructions on this page when creating an account : http://support.apple.com/kb/HT2534
    then card details will need to be entered before you will be able to use the account to download any item from the store (paid-for or free).

  • Photoshop CS6 Extended 64 bit stopped working (asking for registration)

    Is there a solution for this yet?
    I registered this in 2012 and have been using it since on my Dell 64 bit laptop Windows 7.
    Now its asking for registration again.
    I don't want to use up another activation.
    What happened to Adobe support? Why is there no phone number to call?

    I already looked at what was available at the link.
    I entered the license again and this time it worked.
    Does this mean that I have used both of my installations?
    This PC is the only one it's been installed on. I should still have one more installation.

  • My AppStore wont update my apps because my old iTunes account keeps coming up and asks for billing info HELP!!!

    My AppStore wont update my apps because my old iTunes account keeps coming up and asks for billing info HELP!!!

    Apps are always associated with the Apple ID that was used to purchase them. This cannot be changed. To avoid getting the request you are seeing delete all apps that request the former Apple ID and download them again.
    Any apps for which you paid a fee will require that you purchase them again.

  • I want to download free apps for iphone 4s but when downloading it is asking for payment info. the application are free but why it is asking for purchase details...please help me...

    I want to download free apps for iphone 4s but when downloading it is asking for payment info. the application are free but why it is asking for purchase details...please help me...

    In iTunes, click "Store", sign in with your Apple I.D. After singing in, click "Store" again, select "View my Account", re-enter your password and your account info will be displayed.
    Click "Edit" in front of "payment information" and select "None"

  • I subscribed to Photoshop CC through the creative cloud but it keeps asking for registration

    I subscribed to Photoshop cc through the creative cloud which has been registered. Whenever I open Photoshop it asks for registration?

    Registering does no good and I had similar problems with the full Adobe package for a year and now it's still not working right with this photographers package. I've been watching for a fix for a long while now and nothing here ever helps. They assume you are not registered usually, but of course that's not the case. After all this time this problem remains for many people. After a while you just live with it and pray that you don't have an internet outage and miss a deadline.
    Pro software should not have a system this flawed.

  • Every time I try to download a free app, I'm asked for cc info. There is a iTunes card with $60 credit, why can't I just use that?

    Every time I try to download a free app, I'm asked for cc info. There is a iTunes card with $60 credit, why can't I just use that?

    http://support.apple.com/kb/ht1918
    http://support.apple.com/kb/ts5366

  • Every time I try to download an app the tablet ask for billing info... Why

    Very time I try to download an app the tablet ask for billing info... Why

    make sure you have every field filled out in the billing window.

  • When I click free application to download it is asking for billing info?, When I click free application to download it is asking for billing info?

    When I click free application to download it is asking for billing info?

    I also had this problem.

  • How do you contact apple when you get an email asking for your info that you think is spam so apple can check it out?

    just got an email asking for my info to secure my apple account. how do i report it to apple so they can deal with it?

    [email protected]

  • HT204088 my apps will not download because it asks for security info and whenever i type it in it never validates

    my apps will not download because it asks for security info and whenever i type it in it never validates. Can anyone help me?

    Hi..
    Perhaps a security code issue >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • Just bought an itunes card but when buying music, its asking for billing info :/ and no taking the money of my reedemed card

    just bought an itunes card but when buying music, its asking for billing info :/ and no taking the money of my reedemed card

    Update your credit card info.
    This is how iTunes verifies your account.

  • Trying to purchase an app on the ipod after the upgrade.  Asking for security info, but after we answer the questions, we get "an error occured. We couldn't save your changes" on security info screen.  HELP!

    Trying to purchase an app on the ipod after the upgrade to 5.1.1.  Asking for security info, but after we answer the questions, we get "An error occured. We couldn't save your changes" on security info screen.  HELP!

    Us too! We've answered the questions and then get "An error occurred. We couldn't save your changes". Now what? We have a balance in the itunes account that it seems cannot be transferred. What next?

Maybe you are looking for

  • Port Forwarding For WinXP (RDC) (Using AE 802.11n)

    I have some problem and I need some thoughts and input from someone else, Here goes. Here is what im looking to accomplish. From my work I want to be able to connect into my machine at home (windows XP). I cannot use the standard RDC (Remote Desktop

  • Snapshot Cube

    Hi Guys, I was wondering if you could give me a hand with a Snapshot Cube that one of my clients want me to create for one of their APO Cubes. So basically what they want is to be able to take a monthly snapshot (what ever day of the month they choos

  • Lower Controller not being used, does it need to be on?

    I am currently not utilizing my lower controller. I have no drives on that side. Is it necessary to have it powered on?

  • TL11g & EJB3: One-to-Many problems with removing entity from list

    Hi, I posted this problem on JDev11g forum, but I hope I will get some information here as well. I have two entities based on tables in HR schema (Departments and Employees). Department has a list of employees. These are the annotations: @Entity publ

  • Photos on my ipad mini have a 'photo negative' look

    have recently purchased a mini ipad.  somehow in the process of installing various software, the photos uploaded and newly taken all have a ''photo negative' look.  how do we restore the photos to their normal state?