Motion assistant: Cannot convert to LabView file

Hello,
I would like to ask for help on problem: the file generation from Motion assistant to Labview
Background:
1. Use Motion assistant to generate 2 or 3 steps of motion.
2. Save it.
3. Inside Motion assistant, Use Tools>>Generate Code>>LabView Diagram.
Result:
After I doing this, the LabView file is generated. But, it is a file containing a few control switch (without any other key components to produce the motion control function).
Thus, what is the problem behind?
Thanks
James

Dear Jochen,
I had tried what you said.
1.
Treat read-only VI as locked : uncheck
Enable window explorer for LLB file : check
Note: basically, I have reset the machine after set the options
2.
Uninstall Ni-motion -> no-reboot -> install again
After I have do this steps individually, Nothing has corrected.
What is the problem then?
Regards,
James
Note:
Attached please find the Motion assistant source file for your reference
Attachments:
Motion-Part2b.vi ‏9 KB

Similar Messages

Motion assistant: Cannot convert to Labview diagram

Hello,
I would like to ask for help on problem: the file generation from Motion assistant to Labview
Background:
1. Use Motion assistant to generate 2 or 3 steps of motion.
2. Inside Motion assistant, Use Tools>>Generate Code>>LabView Diagram.
Result:
After I doing this, the LabView file is generated. But, it is a file containing a few control switch (without any other key components to produce the motion control function).
Thus, what is the problem behind?
Thanks
James

Good morning James,
This post appears to be a duplicate of the following thread:
http://forums.ni.com/ni/board/message?board.id=240&message.id=3878
Please refer to this thread for the solution. If am incorrect, please post back and I will do my best to answer your questions.
Respectfully,
Jeffrey P.
LabVIEW Product Management
National Instruments

I cannot convert my pdf files to word. I keep getting an error message that "an error occurred while trying to access the service"?

I cannot convert my pdf files to word. I keep getting an error message that "an error occurred while trying to access the service"?

See if anything in here helps: https://forums.adobe.com/docs/DOC-1831
[topic moved to ExportPDF forum]

Cannot Convert protected WMA files

I'm new to iTunes. I have lots of songs I previously downloaded from Dell's MusicMatch. When I attempt to import them I get the error that they are proected WMA files and iTunes cannot convert them. How do I unprotect the files so I can import them? Thanks in advance for any help anyone can provide.

Yes, you can change it in iTunes prefs.
Also, how do you suggest is the best way to bring songs over - I know if they are protected I need to burn them to a CD but can you drag, etc?
Once you burn them to an audio CD, import it as normal.
You'll probably have to edit the ID3 tags with all the info.

Assistance in converting Pre-release files

I have 3 InDesign CS4 files that were created for demo purpose on the pre-release version. I've used the converter to re-use these files in the real InDesign CS4 but an error kept showing that I can't convert them.
Can some one with the pre-release copy on their machine assist in opening these 3 files then save them as .inx?

Bryon,
Nobody "somehow" gets beta software off of a web site without a LOT of hard work.
Where did you get it?
Where did the serial number come from?
You must have some record of that information.
The reason no one here can help you is that this sort of thing happens after every release of the new software.
People who have "somehow" been using the beta software suddenly find out that their old files won't open any more.
If they got the beta through legitimate means, there is always someone who can help.
But all of us have seen too many people with the most inventive stories trying to get beta files converted.
You'd be amazed at how involved those stories can be.
But your story is a first. I've never heard of someone who can't remember how the software appeared on his machine.
I'm impressed.
Now go back and figure out where you get it from and contact that person.

Convert old labview file

Hello,
I have an old labview file created with 5.1 version. Currently I am using Labview 10.0, Could anyone convert the attached file to a newer version?
Many thanks!!
Solved!
Go to Solution.
Attachments:
AnaECP_REG.vi ‏310 KB

Hello,
I have an old labview DAQ file used with 5.0 Version. Currently I am using 10.0, Could anybody convert the attached file to a newer version?
Thanks a lot.
Attachments:
mywork - Copy of Old Version 5.llb ‏1040 KB

I cannot convert large psa file

I have two catalogs created in Photoshop Album 3.2 and I downloaded Elements 11 and had no difficulty finding and converting the smaller file, but the function will not display the larger file to be selected for conversion. Is size the problem, and if so, how can I cope?

Sometimes catalog conversion fails. It’s often a question of needing full permission settings and the easiest way to make it work is as an administrator directly from the desktop which bypasses the welcome screen background processes.
Make a shortcut for organizer as follows:
On Windows right-click anywhere on the desktop and choose New >> Shortcut
Browse to Computer OS C:
Find the PSE Organizer application in Program Files or Program Files (x86) on Windows 7 - 64 bit.
C: >> Program Files (x86) >> Adobe >> Elements 11 Organizer
Within the Elements 11 Organizer folder find the application PhotoshopElementsOrganizer (not Photoshop Elements 11.0)
Select (highlight) PhotoshopElementsOrganizer and click Next
Then click Finish.
Now right-click on your new desktop icon and choose “Run As Administrator” Then authorize by clicking yes in the User Account Control dialog.
From the Organizer menu click:
File >> Manage Catalogs
Then click the “Convert” button
Select your desired catalog from the list of previous versions of PSE to highlight it then click the “Convert” button down below it
You should receive a message when the conversion has been successfully completed and your earlier catalog will be automatically re-named. Choose the new name from the list and click the “Open“ button and you are good to go.

When i try to print from Parallels Desktop to my mac printer, it cannot convert the prescript file. what should i do?

i use Quickbooks accounting for windows and when i bought my new mac i had to buy parallels desktop so that i could continue to use my accounting software. it has been working since then and i dont know what happened, but now when i print something i get a message saying that states "Unable to Convert The ProScript File".
Help Please!!!
Niko96
i need this fixed a.s.a.p!!!!

I don't have Parallels; I use Fusion. And in Fusion you have the option to use the installed printer is OS X to print. I have seen printing from Windows 7 to the Mac printer result in errors and there is a chance you are having the same issue.
If Parallels has the same facility where you can use the Mac's printer then I would suggest that you install a Windows driver for your printer in Parallels and not use the Mac printer. This should stop the conversion error you are getting.

I cannot convert my .cr2 files in Adobe DNG

Hello,
Can someone help me with my problem before I loose this client.
I've recently started using the Canon 60D to shoot videos and take pictures. Since I've started using the 60D I was able to land a client who needs pictures taken for his clothing store. I understand that taking RAW pictures are better than JPEG so I am just now experiencing RAW. However I've come across a problem that I cannot find a solution to. I currently own Photoshop CS4 and I do not have the means right now to upgrade to CS5. Photoshop does not recognize my .cr2 files and I later downloaded Adobe DNG 6.4 to convert my files. DNG does not recognize my files, since then Ive removed it and downgraded to DNG 6.3 and it still does not recognize my files.
I've tried everything imaginable and nothing seems to work. I've tried dragging and dropping my pics into the Adobe DNG icon, moving my pics to my C drive, downloading Canon RAW codec which then turned my files into a unrecognizable data file and I had to reupload my pictures from the camera again. I do not have a CD-ROM for my camera because it is not mine, but someone elses who is letting me use it for business. I have to show this client the pictures by Tuesday and if I do not have this problem resolved by then I could loose this client and all of this hard work was for nothing. Please help, Thank you.

According to the readme file, the 60D was not supported in ACR 5.7 which was the last version created that is compatible with Photoshop CS4. If you are not in a position to upgrade to Photoshop CS5 then download the latest DNG converter (currently version 6.4) and convert your raw images to DNG files. Then make you will be able to open those with what you have.

Help needed to up-convert my labview files from 5.1 to 8.6

I can't find any resource to up-covert a few of my old 5.1 vi's to labview 8.6. Can anyone convert them?
Thanks for your very appreciate help.
Roberto-
Solved!
Go to Solution.
Attachments:
oldVIs.zip ‏252 KB

attached as 8.2, which you can open
Attachments:
oldVIs.zip ‏156 KB

Automator: Cannot convert multiple .doc files to PDF

Hi everyone!
I can't get my automator to print PDF files correctly. Once I have run the workflow I try to open the files and they are "messed up" preview and adobe both tell me that the "File cannot be opened. It may be damaged or use a file format that Preview doesn’t recognize."
When I go to Automator I see an error message - (1728) The object you are trying to access does not exist. However, if I manually create the PDF from Word or Pages, I have no problem.
I really appreciate the help, I need this to grade student papers and I have 200 students. Figuring this out would really make my life better.
Thank you for your time!
Diana

Here's the screenshot.
I tried using several different files and it seems not to be the problem.
/Users/arqanaid/Desktop/Screen shot 2011-03-04 at 2.32.46 PM.png
Thank you all for being so helpful!

Assistance in converting/downgrading CS5 file to CS3 version?

Hi,
I noticed in a few other threads that several kind members of this forum have offered to convert files that were created in InDesign CS5 (in my case a trial version) into a format compatible with InDesign CS3 (which I have installed on my system). I apologize in advance if this is not the appropriate way to go about asking for this favor...I am just unsure of what else to do. I can clearly see now that there is nothing I can do on my end with these files, and am in a bit of a jam. I have two single-page documents that I can't access anymore, and would be greatly appreciative if anyone could help make them useable again on my system. Thank you, and again I apologize if this is an improper way to go about this.
Sara

Thank you SOOO much Peter--saved me countless hours of frustration!

No matter what i do i cannot convert my .cr2 files into .jpeg, It pops up with a message saying this isnt the right type of document, does anybody know what to do?

I have tried different plugins and every guide to fix it and I cannot fix it, any suggestions?

EOS 30D
CR2
3.4
ACR 3.4 or later is required for you camera or you need to create dng files for your CS2 files and process the dng files with ACR 3....

Cannot convert all VOB files from a video

A friend had a VHS video put onto a DVD so I could edit it for her in IMovie 09. She told the company what I was going to do, so they were supposed to put it into a format that I could work with in IMovie. Instead, everything came as VOB files. I used Prism Plus to convert them to MPEG4. However, three of the files won't convert. They freeze up after one minute of processing. Research on this forum told me it might be a protection issue, so I used AnyDVD to try to remove that. It didn't help. Another forum post recommended recommended Streamclip. I downloaded that, but it told me I needed a MPEG-2 playback component. This project is beginning to get expensive for something I will only be doing one time. Are there other options? Also, I don't understand why some of the VOB files would convert while these won't. Any ideas? Thanks.

Actually, if you're not doing any editing beyond separating the different films and are willing to dive into a slightly deeper end of the pool, you can use mpeg streamclip to "demux" the dvds into m2v (video) and ac3 (audio) files and bring these files into dvdsp and set start and ends for each section to make individual dvds. This will allow you to repurpose the material without any loss in quality. If you convert the material from the dvd into quicktimes suitable for editing in fcp and then recompress them for authoring back to dvd, you will have some quality loss. Whether the loss is enough to worry you, you'll have to decide for yourself.
If you want any further help with this workflow, post back.

How do I convert a pdf file to a "Word" file...all other online suggestions do not help.

I cannot convert a pdf file to a "Word" file altough I have a monthly membership with Adobe.

Thank you so much for your response Bernd... I finally got it to work....not sure how it worked but it did.

Motion assistant: Cannot convert to LabView file

Similar Messages

Maybe you are looking for