Motion Blur not working in AE CC

Using AE CC on a MacBook Pro, adding motion blur to a fast-moving footage layer in a comp. Both the comp and layer motion blur toggle are on, but no blur is added. Force motion blur has the same non-result.

Make sure the layer is moving. Make sure you are not set to draft. Show us a screenshot and we can probably nail it down in 2 seconds.

Similar Messages

  • CS3 Motion Blur not working?

    I have a comp that has just a text layer. I've enabled 3D switch for the layer. I added a wiggle expression to its position. I then enabled the motion blur switch. When previewing and/or rendering, I don't see any motion blur at all. I really don't want to use CC Force Motion Blur because it takes too long to render. Does anyone know the reason for this or what it might be? Is there a setting somewhere that I might have disabled so I don't see motion blur?

    See
    "Use motion blur" for a description of all of the UI items that affect motion blur.

  • Motion tween not working - CS5

    I created a symbol, placed it on the timeline, made a copy and moved it to another place on the timeline, clicked in the middle and selected motion tween. It shows a motion tween on my timeline, but when I move the playhead, there is no animation, just a start state and an end state. Help, please!

    should only be the symbol on that layer, there should be no other object, be careful, a single point can do not work
    If you copy the symbol in the time line then use "Create Classic Tween"
    to use "Create Motion Tween" just right click on the frame in the timeline (without copying anything in the timeline) and select "Create Motion Tween", position the playhead at the frame you want and move the position of symbol

  • Motion tween not working when tested

    I have a situtation trying to get a motion tween to work. It woeks in the  time framw when I hit play but when I go to test it does not work. I can send file if soemone can help.

    Ned,
    was watching the below tutorial and desgined my text/tween similar on the page. On My page I am creating a Flash  Portfolio of some work. all the files work in myloader on the stage.  In the timeline,  when I move the  guide the text works. Also when I push Play it works.  But when I go to test it does not.
      The text is what I want to start as soon as the page loads. I do not have a code in action script because everthing i put deos not work. Hope you can help
    http://www.youtube.com/watch?v=dXCGKmO2EBU
    Tim

  • Motion Tween not working

    What would cause a motion tween not to work. I am using
    graphics for both keyframes and it is showing an arrow on my
    timeline, but its not gradually making it bigger. Just small,
    small, small, and then big all of the sudden. I tried doing the
    same tween earlier on the timeline and it worked fine, so it is
    something with this frame. I have all other layers hidden and I
    don't see anything else on this layer. But if I did have something
    I think Flash would give an error message and a dotted line on the
    timeline, so I don't think that's it. Any other ideas?

    hcinderela wrote:
    > What would cause a motion tween not to work. I am using
    graphics for both
    > keyframes and it is showing an arrow on my timeline, but
    its not gradually
    > making it bigger. Just small, small, small, and then big
    all of the sudden. I
    > tried doing the same tween earlier on the timeline and
    it worked fine, so it is
    > something with this frame. I have all other layers
    hidden and I don't see
    > anything else on this layer. But if I did have something
    I think Flash would
    > give an error message and a dotted line on the timeline,
    so I don't think
    > that's it. Any other ideas?
    can you upload the fla (zipped) to you server for us to check
    Best Regards
    Urami
    !!!!!!! Merry Christmas !!!!!!!
    Happy New Year
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Motion menu not working

    I'm frustrated. In the menu, under Properties/Motion tab, I select the video that I want to set up as my motion menu and it's not working. All I see is a static image of the video clip. The audio works but not the video clip set for motion. Please help.

    But what I remembered is using part of a clip in Encore and I had a hell of a job to, anyway, unsuccessfully work the sound out ok. This is when I made the exact clip I needed in PP and imported it in Encore. Then I set the loop for ever. This way you can have this clip playing till someone chose what to wathch. I guess it's nice to have some movie starting automatically when there are not to many choices from them.
    When doing both a Motion Menu and also adding Audio to it, you will probably be best served to Export these as elemental streams from PrPro, and Import those into Encore.
    I will create a new Sequence in the Project, and create the Video part to the intended Duration for the Motion Menu. Same for my Audio, and often do this in yet another Sequence. I will chose Audio source files with quite a bit of repetition during the Duration, and a fade-in/fade-out to it. I've marked a half-dozen SmartSound pieces, that work very well for this.
    The Video is Exported as DV-AVI Type II, with NO Audio, and multiplexing is turned off.
    The Audio is Exported as either PCM/WAV 48KHz 16-bit, or AC3 DD 5.1 SS through the SurCode encoder (plug-in that costs ~US$250) for Surround Sound, NO Video and no multiplexing, obviously.
    Doing it this way solves a lot of potential problems. Muxed files can cause issues with En, though not always.
    One caveat that I learned the hard way - if you have Audio on your Menu and also Button Transitions with Audio, you will want the Audio for each to match perfectly in format and CODEC. Otherwise you will probably loose the Audio in one, or the other. Last caveat - stay as far away from MP3's as you can. Some work, some just do not and the quality will already have suffered greatly. I only use these for some of my SFX in PrPro and never, never for anything else.
    Good luck and don't forget to Render those Motion Menus... [Grin]
    Hunt

  • Audio from motion file not working in DVDSP

    I created a DVD menu in motion. There is a 4 second intro, and then the music begins. I have set the loop to happen after the 4 second intro, and it is working properly in DVDSP, however the audio is not working. In the manual it says that "If you assign a video asset to the menu’s background by dragging it to the Menu Editor, DVD Studio Pro can automatically assign its companion audio file to the menu" pg. 279. I check the track preferences and it is set to find matching audio when dragging, so I don't know why the audio isn't working.

    I think I resolved this! I had the same issues you have been having for a few months. I am actually running Vista. Here is what I did...
    1. While booted to Windows I uninstalled boot camp
    2. Re-installed boot camp from Leopard DVD
    3. Installed boot camp update 2.1 (downloaded from Apple support, i know this is for XP only, but I updated anyway.)
    4. Downloaded the realtek drivers (high definition audio codecs) from http://www.realtek.com.tw/downloads/
    5. DO NOT use the Realtek installer to install the drivers...instead extract the contents to a folder.
    6. Go to the device manager, locate the High Definition Audio device and updated the drivers from here (point to the folder where you extracted the drivers).
    I now have sound out of the rear jack!! Hope this help someone
    Regards,
    Blaine

  • Flash CS4 Alpha Motion Fade Not Working In flashplayers 10

    Hi,
    I have a basic alpha motion fade which works using my flashplayer but not in flash players less than version 10 (no fade is present its just instantly there). If I change the player I am developing for in my movie settings the fade just does not work.
    Can anyone help with a solution?
    Chance
    SEO Scotland

    Hey there,
    Could you describe the setup or link a file with the problem?  I can't reproduce the problem with basic fades (obviously they should continue to work when you switch the player).  Is it just in the document you're working on, or all documents you create?
    Thanks,
    Jen.

  • Sudden motion sensor not working with replacement harddisk?

    I replaced the original harddisk of my Macbook pro (500 GB, 7.200 rpm, model no. HTS725050A9A362) with the retail version of the same harddisk (model no. HTS725050A9A364).
    Now I'm missing the typical "click" when the sudden motion sensor parks the heads and I'm afraid it's not working - although "pmset -g" shows "sms 1".
    Is there anything else I can check, e.g. enable head parking at harddisk-firmware level?
    Thanks
    Juls

    For future reference, here are a couple of kb articles on the sudden motion sensor:
    http://support.apple.com/kb/HT1935
    http://support.apple.com/kb/HT1934
    As has been said, Apple's Sudden Motion Sensor is not actually built into the hard drive. In fact, some hard drives with their own version of a sudden motion sensor like Seagate's G-Force Protection actually will set up a conflict with Apple's Sudden Motion Sensor.
    I installed the same WD in my Mac as you did, and I hope you enjoy it as much as I have been enjoying mine.

  • Motion menus not working after Leopard

    I see that other people are having problems with motion menu templates after installing Leopard. I tried trashing my prefs and that didn't work. Has anyone else found a solution to the issue. Thanks!

    What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
    Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

  • Basic Motion Tween not working?

    I created a graphic symbol in Illustrator and copied-and-pasted it into Flash. I placed a keyframe further in the Timeline and scaled the symbol down on that frame. I went back to the first frame and right clicked on it and chose to create motion tween, though nothing visually happened between the first frame and last one like it did in previous versions, and the the symbol did not not animate. What did I do wrong?
    Thanks.

    Adobe has made it a wild goose chase. For me, it only works if I don't have a second keyframe. Baffling, why should it behave so differently than classic tweening?!
    People like me have been hitting their heads against the wall for years trying to get this to work. Absolutely asinine.
    For the record and to repeat my huge gripe, it behaves nothing like classic tweening, where you define an end point and then "tween" between them. You can end up doing that, but you can't create the tween between two existing keyframes (even if they have the exact same single object in them).
    So this is what's working for me now:
    1 - Create a timeline layer with one single object in an initial keyframe (black dot indicates a keyframe). No more than one object can be tweened in one layer, but Adobe will not give you any userful feedback about this while you're working.
    2 - On that layer, farther out in the timeline where there are no frames (what is the name for these "non-frames"?), right click where you want the tween to end, and select "Insert frame". (You'll have a black dot keyframe, a row of grey empty frames, and white box as a blank keyframe.
    3 - Right click anywhere on the active part of that timeline and choose "Create Motion Tween", even though there is nothing to tween yet. After you do this, the span of frames should turn blue and the blank keyframe white box should disappear. Congratulations, you've created your first motion tween, but Adobe doesn't want you to know that. You need to actually go to individual frames and move the object around to get tweening to happen, as I outline in steps 4 and 5. Assuming your object is where you want it in the starting position, I would recommend going to the last frame to determine the final position next. Then you can do any number of middle positions (each frame can have a new position).
    4 - (optional step, helps with positioning on the timeline) Scrub the timeline and find a frame where you want the trajectory of your object to change (at the very minimum, you'll want to move the object for one frame, otherwise there will be no motion)
    5 - Move the object on the stage.
    6 - Repeat 4 and 5 for as many frames as you want.
    If you're not seeing motion paths that chart the motion, play with the little buttons on the bottom of the timeline, such as Onion Skinning. Lastly, just move the playhead left and right. If you're not seeing your object move, then blame Adobe some more, because this is far from immediately intuitive.

  • Average blur not working

    I have a UV map of a banana that is full of trianglesI will be using this on top of my banana to know where to make small triangles and use average blue to create a low poly banana that is unwrapped. So I used the polygon tool to create a small triangle and click average blur to get the yellow colour from banana to uv layout. When I do create a triangle on either the banana or uv and use average blur the colour doesn't actually appear can someone please explain why as well as can someone please tell how I can get the average blur of the banana but not place it on banana instead place it on the uv so it fills the triangle giving me a texture I can import to blender to give colour to my banana model. I do have a feeling it has something to do with masking but I am completely clueless on how to do any of this I am very new, I have tried searching for an hour getting no where I decided to ask here thankyou.

    To get your colors correct, your approach may work, but is a lot of extra work....in 3D you simply apply the image to the UV map (the triangle shapes simply show you where the image shape will be); then use the 3D program to let the UV map image wrap around the 3D object....re-read your 3D program instructions/help file on the whole process of applying a UV image map to the 3D model....you extract the UV map, apply the image in Ps, then re-apply the UV map to the model.  There are lots of tuts on www; use Google to search for UV mapping process.  There are add-on/plug-in UV map tools which also explain/demo the process.  Look for UVmapper or similar.
    Using your method, you must use the "selection" tool to create a selection (such as a triangle); then apply the average blur effect to get an avg color in that triangle.  But if you use the image as a whole, you will have better continuous image colors rather than a whole bunch of colored triangles.
    You get a low poly object by creating a low poly model; not by applying an image map....although you can save file sizes by using a lo-resolution image .jpg or .png

  • My Ipod Touch Shake & Steering Functions (motions) are not working

    I have had my ipod touch 32gb for 3 months now and in the last 48 hours, my shake function & steering function in apps & song shuffle and pretty much any motion function has stopped working. I am not getting any error messages either. I have turned off the ipod touch and turned off on these functions and nothing changes.
    Can anyone help me ?
    Thanks.

    Do a restore through iTunes. Skip the restore as new option and restore from the last backup point. This should fix it but if it persists, it could be a hardware problem which will require Apple's attention.

  • Sudden Motion Sensor not working after upgrade to WD5000BEKT HDD

    Hi everyone, I just upgraded the hard drive on my Macbook Pro (2010) and I am very pleased with the performance of this 7200rpm drive, I have seen reads around 105MB/s and a pretty good boot time at 23s. But I used to be able to hear the hard drive stop when I moved the computer around before due to the Sudden Motion Sensor technology and since I have the new hard drive in it doesn't seem to work anymore. I have tried switching SMS off and on and it didn't change anything, also the drive is a Western Digital Scorpio Black without Free Fall sensor (I took that version on purpose so it wouldn't conflict with the SMS). Do you have any ideas on how to make it work again? Because I really like this feature on my Mac (I have dropped a laptop before so just in case it happens again). Thanks a lot for your help.
    Scott

    For future reference, here are a couple of kb articles on the sudden motion sensor:
    http://support.apple.com/kb/HT1935
    http://support.apple.com/kb/HT1934
    As has been said, Apple's Sudden Motion Sensor is not actually built into the hard drive. In fact, some hard drives with their own version of a sudden motion sensor like Seagate's G-Force Protection actually will set up a conflict with Apple's Sudden Motion Sensor.
    I installed the same WD in my Mac as you did, and I hope you enjoy it as much as I have been enjoying mine.

  • Encore cs5 motion menus not working when build to flash

    Hello my question is this, I have created a dvd in encore cs5. I have created motion menus in AE.
    Everything works great when I build to DVD. However when I export to flash my animated menu is working but the buttons (play move, chapter select , extras) do not show up until the animation is complete. Is this a simple fix? or should I make the menus static?

    Hmm... what version of the Flash Player are you testing with
    (full version, including release number)? You can find out which
    version you're using here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507
    -Robert

Maybe you are looking for