Motion canvas on a second monitor question
Ok, so after jumping through multiple flaming hoops to get the app store to update motion to 5.0.1 i have a question concerning one of the "improvements"
Putting your canvas on a second monitor. Is there a way to do so WITHOUT the toolbar going with it? Please? Awww come on?!?
Well, why? The tool bar is full of the tools you use in the Canvas itself. Why would you want to move them far away from the Canvas? I don't see that it would make sense to move the tools used in the Canvas and Layers pane to a different monitor where they're NOT used.
The F8 function also quickly switches to a really nice setup hiding the Inspector and Layers panes.
Similar Messages
-
Hello, I just got the new iMac, and I'm planning to get another display (maybe and 20"). I just wonder if I hook up the second display, will the graphics of the main monitor experience slow down? The card is a x1600 128mb.
Thanks for any info.Why wouldn't it? It says here that it can support both video mirroring, and extended desktops:
http://www.apple.com/imac/specs.html
Trevor -
MSI Gt70 dominator pro connecting second monitor questions
I have the new dominator pro, when I plug in my monitor (23" asus ips) it automatically runs off my gtx gpu. Light turns on, heats up (not hot but not idle). Is there any way to change this to run off intel? I'm not doing anything at all that would require descrite power, right now im just trying to have vevo on monitor for my son to watch videos while I work on my laptop screen.
I know with my asus g750 laptops it was always defaulted to intel gpu when connecting second screen.Quote from: Dblkk;108055
Yea, I tried that. That's how I always set up multi monitor (then I have the extend/clone/ect options. But when I did that, the resolution was horrible, the picture was a good 4 inches from each side (left/right) and all the way top to bottom. All settings were full screen, regular resolution, eveyhing exactly the way it runs on my other machines. Just total crap on my msi, and NVidia graphics were still on.
I searched all settings and everything looks legit, but NVidia graphics are in charge. Maybe that's just the design of the msi, whenever a second screen is used, it just defaults (without user control) to NVidia. Maybe bios or something hidden?
Not a huge issue, just wasn't sure if it was a common msi thing with an easy fix or not.
I forgot to ask something as well. How is the monitor connected? HDMI? DVI? DP? Maybe a diferent cable might change the result? I'll try the monitor thing on my demo unit when I'm back at Memory Express on Sunday and update. -
I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?
Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!
-
Questions about connecting second monitor to HP 610-1015xt TouchSmart AIO
Hi,
I have a HP 610-1015xt touchsmart PC with AMD Radeon HD5570. Now I've gone through all the similar questions on this forum and I still had a couple of my own or needed some more calarity on some.
I've read time and again that one should use the second monitor in "clone" mode istead of "extended" mode because TouchSmart software is not compatilable with exteded mode. Now does that simply mean that my PC may show erratice behavior if I try to use touch features while in extended mode and second monitor connected? Because if that's the only issue, I can live with it as I don't use touch features at all. Also, will dsiabling touch help in any way?
Is anyone here using a second monitor in extended mode on a touchsmart? Have you guys faced any issues?
Also, what I'm trying to find out is if things will run smooth if I connect a HP 32" Quad HD monitor with 2560 x 1440 resolution? I have found a adapater called Plugable USB 3.0 to HDMI adapter which supports 2560 x 1440, I'm just trying to figure out if my PC will be able to hadle it? If anyone has any knowledge on this, please do share. Because if I can't get the full resolution, I will just settle for a full HD screen.
People, please do share your experinece or suggestions. Any help will be greatly appreciated.
Thank you,
JayJay, I own a notebook without touch but a monitor with touch. I use my monitor as extended monitor. The touch works fine on the extended monitor and works without touch on the notebook screen. I do not face any issues in using this way. Depending on my need, it switch my primary display to the extended touch monitor or notebook screen. Whether it is the primary display or not, when in extended mode, the touch works fine on my monitor.
Regarding the other question on Quad monitors, my knowledge is limited. Sorry for not being able to answer that part of the question.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
I have a Sony TV that has HDMI in and I would like to use this as a preview monitor. Can I just run a DVI/HDMI cable from the tower to the tv? Or is there another way?
wolfgang schabhuettl wrote:
but you can use a dvi-hdmi cabel to use the TV as second monitor
All this does is create a second computer desktop hanging off of the computer graphics card, is this what the OP wants? -
Question about using an older television as second monitor
I have the late 2006 iMac 24 listed below (Core 2 Duo) and would like to connect a standard television as a second monitor. The telly has (2) S-video ports and the usual RCA-type plugs. Are linkages available to allow this with my iMac? If so, could you direct me to the proper components? Will audio be available to me, as well? Can I acquire the components locally (Radio Shack, CC, BB, etc.)? Thanks for your assistance.
-jjseaHi jjsea
To connect a TV using S-video or Composite (yellow) cable you will need the M9319G/A Mini-DVI to Video adapter, which may be available at some BestBuy's.
http://store.apple.com/us/product/M9319G/A
The iMac's Mini DVI port does not support the Audio, that will have to come from your Headphone jack using a separate RCA (red & white) cable and an adapter like the one in the next link:
http://www.cablestogo.com/product.asp?cat%5Fid=118&sku=40645
or an adapter/cable like the next one:
http://www.maplin.co.uk/Module.aspx?TabID=1&ModuleNo=31700&doy=19m2
I'm using this same set-up and it works great for watching all types of DVD movies, Q-Time movies, YouTube videos, iPhoto slideshows and more, but the set-up is a little rough for working in text documents.
Dennis -
CS4 - Is there a way to adjust gamma for second monitor or send to overlay?
One thing that is evident when I edit in Premiere CS4 using the AVCHD 1080i 60 template is that the preview in the second monitor, which in my case is my TV set connected using a DVI to HDMI cable, is that the output is too dark compared to what it should be. Darker areas of the frame sometimes even get crushed into black when the same footage, when played directly from the camcorder, or even burned to blu-ray and played, is noticeably brighter and at the right black levels.
This doesn't happen when editing in Vegas Pro 8, or when the untouched footage is played through other video player, including Windows 7 Media Center.
A workaround for this problem can be to go to the graphics card control panel, in my case ATI Catalyst, and adjust the gamma for the second monitor, with the problem being that when you're done editing in Premiere you have to go back to the normal gamma. At one point I had setup two profiles in Catalyst with shortcuts and it worked well, but one day Catalyst simply lost the profiles and noticing how buggy it was I wasn't going to keep creating profiles so that Catalyst would delete them.
So my question is, since it's not in the preferences, is there some settings file or registry address that I can tweak to make Premiere display a brighter gamma of my choice?
And this may be a dead end, but is there a way to send the output of the second monitor to the overlay so that it can take advantage of the graphic's card video capabilities and display video smoothly? It's nice to have a preview of the timeline, but it's rather annoying if I have to go to the Catalyst control panel and adjust gamma before editing and after editing and that motion is jerky and not interlaced when I'm editing interlaced content.You need the VESA mount option. That way your minimum angle would be completely vertical and you could open it to a negative 10 degrees.
Hope this helps.
Pete
I am not an HP employee, But I did stay at a Holiday Inn Express last night.
TouchSmart IQ526t CTO Intel 2.26 Ghz 4 gig ram 750 gig HDD Vista Premium 64 bit -
Is it possible to use my ipad 4 as a second monitor through a USB connection.
Is it possible to use my ipad 4 as a second monitor through a USB connection.
perhaps, but my information was current. I had the same question and was looking for and answer and found it. So I responded in order to help others who found this question and were looking for an answer. This community is made more helpful and kept current by adding new answers with current information.
imobl... air display was a valid response for 2011 predating the question. Also using Monitor2go was valid in 2012. There were USB mirroring and as a 2nd display for an iPad options at the time the original question was asked. -
Connect a g5imac to a g4 powerbook as a second monitor
Is this possible?
I want to use the laptop as a bigger screen to aid in editing, is it possible?
I have a powermac g5imac with 2 gig ram in.
Thanks in advance.Andy simply answered your very specific question. Now, if you want to hook up a second monitor (not the laptop as you first asked) to your iMac then you may get a few longer answers. Like, Maybe.
If you are editing DV then you should be able to connect your DV cam or deck via FW then connect a monitor to your camera or deck. However, this will just give you a playback monitor, you will not be able to extend your desktop to this monitor. With an iMac I think that is impossible to do because of the lack of additional video (DVI or VGA) outputs.
Long enough?
K -
How to use an iMac as a second monitor for an iMac
I have two 21.5 inch iMac's (late 2009) and I want to use one as a second monitor for the other. I have a Mini DisplayPort to Mini DisplayPort connector but when I connect it to both computers, nothing happens. I'm not sure if I'm doing something wrong once they're plugged in or if I have the wrong cable all together. Any tips or advice would be much appreciated. Thanks
Not going to work, the ONLY 2009 / 2010 iMacs that supported Target Display Mode were the 27" models, 21.5" models simply will not work. Please read Apple FAQ on TDM and you will see I am correct.
Target Display Mode: Frequently Asked Questions (FAQ)
While Neil is correct, Screen Recycler's performance is not that good so the user experience probably will not be worth it. -
How to connect a second monitor/TV to HP ENVY Beats All-In-One
Hi, I was wondering if anyone could tell me if it is even possible to connect a second monitor to the HP ENVY Beats All-In-One Desktop PC, because I'm trying to connect my TV as the second monitor through HDMI and I've tried everything that I could, but have come up empty handed?
This question was solved.
View Solution.Hi,
What is the model/product of your AIO machine ? I many cases, you can't use HDMI port to connect to a TV because it is HDMI IN port. You need USB - HDMI converter/adapter to connect to a TV (or monitor).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
DVI- HDMI discoloration on HDTV (as second monitor)
Hello all.
I have been having some issues when using my Philips CRT 30" 1080i HDTV as a second monitor via a DVI->HDMI cable. There seems to be a discoloration that occurs (my best guess being a "green" discoloration) that occurs in the top left corner of the screen. It is made all the more apparent when you then unplug, and a purple haze is left in the corner of the "blue" video input channel. (i imagine the green discoloration on the blue channel yields purple).
From what I can tell, this problem does not occur on any other video input (say, a Wii on the composite channel, or an XBOX on the component, etc).
I had heard rumblings that it could be, in order of bad to worst: a bad HDMI cable, a bad HDMI input on the television, or the television going bad period.
Wanted to know if any of you have had or heard of similar experiences. Need to decide soon if I'm going to had to just buy a new HDMI cable, or if I need to buy a new television/monitor for a job coming up.
Thanks in advance!
Brian
4/30/10 2:47 PM
Hardware:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f11
Sudden Motion Sensor:
State: Enabled
Network:
Bluetooth DUN:
Type: PPP (PPPSerial)
Hardware: Modem
BSD Device Name: Bluetooth-Modem
Has IP Assigned: No
Service Order: 0
Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
Has IP Assigned: No
Service Order: 1
FireWire:
Type: FireWire
Hardware: FireWire
BSD Device Name: fw0
Has IP Assigned: No
Service Order: 2
AirPort:
Type: AirPort
Hardware: AirPort
BSD Device Name: en1
Has IP Assigned: Yes
Service Order: 3
Software:
System Software Overview:
System Version: Mac OS X 10.6.3 (10D573)
Kernel Version: Darwin 10.3.0
64-bit Kernel and Extensions: No
Time since boot: 12 minutes
ATA:
ATA Bus:
MATSHITADVD-R UJ-857E:
Model: MATSHITADVD-R UJ-857E
Revision: ZA0E
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes
Power Off: Yes
Audio (Built In):
Intel High Definition Audio:
Device ID: 0x106B00A0
Audio ID: 44
Available Devices:
Speaker:
Connection: Internal
Headphone:
Connection: Combo
Internal Microphone:
Connection: Internal
Line In:
Connection: Combo
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
Bluetooth:
Apple Bluetooth Software Version: 2.3.1f4
Hardware Settings:
Vendor ID: 0x5ac
Product ID: 0x8205
Devices (Paired, Favorites, etc):
Device:
Type: Mouse
Firmware Version: 0x200
Services: Mighty Mouse
Manufacturer: Broadcom (0x2, 0x314)
Vendor ID: 0x5ac
Product ID: 0x30c
Diagnostics:
Power On Self-Test:
Last Run: 4/30/10 2:35 PM
Result: Passed
Disc Burning:
MATSHITA DVD-R UJ-857E:
Firmware Revision: ZA0E
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh
Ethernet Cards:
pci168c,24:
Type: Other Network Controller
Bus: PCI
Slot: PCI Slot 5
Vendor ID: 0x168c
Device ID: 0x0024
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0087
Revision ID: 0x0001
Link Width: x1
BSD name: en1
Kext name: AirPortAtheros.kext
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros.k ext
Version: 422.19.10
Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA:
Name: ethernet
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x11ab
Device ID: 0x436a
Subsystem Vendor ID: 0x11ab
Subsystem ID: 0x00ba
Revision ID: 0x0013
Link Width: x1
BSD name: en0
Kext name: AppleYukon2.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2 .kext
Version: 3.1.14b1
FireWire:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
G-Drive mini Device 00:
Manufacturer: G-TECH
Model: 0x0
GUID: 0x1C0D02E00B0A3E
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
G-Drive mini Device 00 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x103
Product Revision Level: FBEO
Sub-units:
G-Drive mini Device 00 SBP-LUN:
Capacity: 250.06 GB (250,059,350,016 bytes)
Removable Media: Yes
BSD Name: disk1
Partition Map Type: APM (Apple Partition Map)
S.M.A.R.T. status: Not Supported
Volumes:
disk1s3:
Capacity: 249.93 GB (249,925,091,328 bytes)
Available: 21.68 GB (21,684,412,416 bytes)
Writable: Yes
File System: Journaled HFS+
Graphics/Displays:
NVIDIA GeForce 8600M GT:
Chipset Model: GeForce 8600M GT
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0407
Revision ID: 0x00a1
ROM Revision: 3175
Displays:
Color LCD:
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected
Memory:
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F9B0000
Part Number: 0x4354323536363441433636372E4D31364647
BANK 1/DIMM1:
Size: 2 GB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
Manufacturer: 0x7F7F7F7F7F9B0000
Part Number: 0x4354323536363441433636372E4D31364647
PCI Cards:
pci168c,24:
Type: Other Network Controller
Driver Installed: Yes
Bus: PCI
Slot: PCI Slot 5
Vendor ID: 0x168c
Device ID: 0x0024
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0087
Revision ID: 0x0001
Link Width: x1
Link Speed: 2.5 GT/s
Serial-ATA:
Intel ICH8-M AHCI:
Vendor: Intel
Product: ICH8-M AHCI
Link Speed: 1.5 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.10 Supported
FUJITSU MHW2160BHPL:
Capacity: 160.04 GB (160,041,885,696 bytes)
Model: FUJITSU MHW2160BHPL
Revision: 0081001C
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s2:
Capacity: 131.94 GB (131,936,026,624 bytes)
Available: 23.73 GB (23,733,391,360 bytes)
Writable: Yes
File System: Journaled HFS+
disk0s3:
Capacity: 27.63 GB (27,626,639,360 bytes)
Available: 13.65 GB (13,652,635,648 bytes)
Writable: Yes
File System: Journaled HFS+
USB:
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x2836
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Product ID: 0x8502
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.45
Serial Number: 607F59A99AB2811A (03.00)
Speed: Up to 480 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 500
USB High-Speed Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x283a
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0xfa
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2835
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3a
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2834
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1a
Bluetooth USB Host Controller:
Product ID: 0x8205
Vendor ID: 0x05ac (Apple Inc.)
Version: 19.65
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x1a100000
Current Available (mA): 500
Current Required (mA): 0
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2830
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x1d
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2831
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x3d
USB Bus:
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x2832
PCI Revision ID: 0x0003
PCI Vendor ID: 0x8086
Bus Number: 0x5d
Apple Internal Keyboard / Trackpad:
Product ID: 0x021a
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.18
Speed: Up to 12 Mb/sec
Manufacturer: Apple Computer
Location ID: 0x5d200000
Current Available (mA): 500
Current Required (mA): 40
IR Receiver:
Product ID: 0x8242
Vendor ID: 0x05ac (Apple Inc.)
Version: 0.16
Speed: Up to 1.5 Mb/sec
Manufacturer: Apple Computer, Inc.
Location ID: 0x5d100000
Current Available (mA): 500
Current Required (mA): 100
AirPort:
Software Versions:
Menu Extra: 6.2.1 (621.1)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2.1 (621.1)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x87)
Firmware Version: Atheros 5416: 2.0.19.10
Locale: FCC
Country Code: US
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status: ConnectedProblems like that are caused by stray magnetism that cause misalignment of the electron beams from landing on the proper phosphor color. The set itself has a demagnetizer, but sometimes the magnetism is too strong for the built-in demagnetizer to overcome. But calling in a TV repair person to do a demagnetization is, I'm afraid, a throw back to bygone days. But that's what your TV needs.
-
Problems with my second monitor after upgrading to Mountain Lion
Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
Have anyone experienced the same problem?!Hello Carlo!
Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain. -
How do I Add second monitor to ALL in One ENVY23 that has a HDMI port
How do I Add second monitor to my ALL in One ENVY23 that has a HDMI port the computer has Win 8 Model #: 23se-d494
Product #: F3D93AA#ABA
Serial #: [edited Serial Number by Moderator]
Software Build #: 14AM1HRA601#SABA#DABA
Service ID #: 20140521
PCBRAND #: HPHere are the specs for your HP ENVY TouchSmart 23se-d494 All-in-One Desktop Computer. Based the specs, the HDMI port on the side of your computer is an INPUT only. This model doesn't have a video output of any kind.
1 - Controls 2 - HDMI In port (model dependent)
You will need to purchase and use a USB-to-video adapter such as the EVGA UV Plus+ UV39 (or any of the many other adapters on the market) to connect an external display to your computer. I personally use and recommend the EVGA UV Plus+ UV39.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240
Maybe you are looking for
-
SUM throws an error at 5.5 Preprocessing MAIN_SHDRUN/ACT_UPG
Hello everyone, While running SUM it throws an error as below:- Below are content of ACTUPG.ELG file ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-74009INSAPUI.HCR ~~~~~~~~~~~~
-
Satellite L355D - No sound after upgrade to Win 7
I have downloaded all of the drivers from Toshiba, upgraded the BIOS, and still nothing. I get sound from headphones, but not the speakers. Volume level shows activity, I can see the ReakTek High - Def Audio as installed and Windows says it's workin
-
Can I edit a PDF once it's created?
I have a design contract I've made in Illustrator and then saved as a PDF doc. Unfortunately every time I have a client I have to edit the thing in Illustrator, then save it as a PDF again. This can be tedious as well as a waste of time. Is there a w
-
Customer service - non stock consumption
Hi Gurus, Some of the parts are procured for service orders as not to stock item (generating PR wrt service order by referring these items with item category N). Is it possible to invoice these items which are consumed against these account assigned
-
Unavailable Master Images are present
Trying to relocate masters to an external drive using Aperture 2.1. Project with many albums which I am relocating to folders with the same name as the album on an external drive. Most of the albums I was able to relocate. There are 4 where I get the