Motion causing blur

hi everybody
the last 2 weeks i am experiencing a strange fenomena that drives me crazy. every time i move the video with the motion effect-i got a blury image in the video. it happens with and without exporting with encore. it happens too if i open it in a new project. any other effect doesnt influence only the motion. the source is avi dv. it happens in automatic transcode and other custums i tried. with another avi dv source - i see the image a bit shaking but no difference between with or without motion efect. with mp4 movies i see no problem at all. is there a special render that motion needs?
please any help or clue will be wellcomevv

hi bill
thank you for your fast reply and please forgive my terrible english.
i did my homework it wasn't easy but i hope i have everything
here it is
system
intel(r) pentium(r) dual cpu
e2200 @ 2.20 ghz
ram 2.99 gb 2.14 ghz
video card
intel(r) g33/g31
express chipset family
audio card
creamware audio card
power sampler dsp board
hard drives
FIRST-1x500 gb sata 2
SECOND-1x300 gb sata2
FIRST
F:/ 68 gb with 62 gb free
G:/ here are all jpgs and audio(waves) of the project 397 gb with 143 gb free
SECOND
c:/ windows and programs 78 gb with 20 gb free
d:/ here are the 2 avi's of the project and documents. 219 with 40 gb free
dvd burners
hl-dt-st dvd - ram gh22np20
virtual memory: 2046 mb
memory uses: programs
process scheduling: programs
operating system
microsoft windows xp
professional 2002
service pack 3
project
adobe premiere pro cs4
version 4.2
2 avi's captured direct to premiere
3 sequences
first sequence (named all)
2.20 hours. 72 chapter markers. everyone is independed - with dynamic link to encore
video 1 from avi's
video 2 : lower third title from template
video 3 : logo(the name of the company written on the bottom) : made with title
video 4 : jpgs place on the top right of some chapters with a frame made in title
audio 1: the camera sound (i dont use it)
audio 2: waves recorded in a studio recording
audio 3 : background music
on every video i use : automatic color, automatic contrast, motion(i moved a little higher and here came the problem in wich i am writing this message) and deep to black on every part
second sequence (named cass3)
32 min with 40 chapter markers everyone independed with dynamic link to encore
video 1: from avi's
video2: jpgs placed in the lower third by crop
video 3: logo made with title
video4 jpgs place on the top made with crop and a frame made with the title
audios : exectly like sequence 1
efects: exactly like sequence 1
third sequence
30 seconds defend of rights violation made with title
in encore
i tried transcode: automatic, 4mb preset and others. i made chapter playlists
i burn into a dual layer dvd 9
this are the 2 gspot report
i hope i have everything
i did my best. if there are anythings more please let me know

Similar Messages

Motion causes machine to freeze

I just got my MBP back from service, and it still malfunctions in Motion under certain conditions: When I add a specific text behavior (Sci-Fi Glow) to a text layer with a specific font (Zapfino), the beach ball of death appears about 2 seconds into the preview. Changes in Resolution, bitdepth, memory usage permissions, updates (even pro apps update), external FW scratch discs, reloading Motion, reloading OSX, and creating a new admin user account have had no affect in resolving this issue. Before the service, a restart after system freeze would bring up the grey startup screen with a row of notches along the bottom (instead of the spinning bezel) and the machine would not start up. After the service, at least so far, it manages to start back up.
I had the squeel, moo, and heat issues before the service. They replaced the HD, MLB, Thermal Sensors, and Cooling Fan components. It still hisses, but less than before. It seems to be an issue that gets worse over time.
I was wondering if anyone else has this Freezing issue with Motion when using Sci-Fi Glow on Zapfino fonts. In my case, even if its the only thing in the project, even if the text is just one letter, the machine still freezes and the beach ball of death appears. Is anyone else having this problem with this or any other machine?

Blixt,
I feel your pain, I lost a good deal of money because of this problem as well.
I had three 1.83 Ghz logic boards put into my MBP. I kept asking for a replacement, but the Customer Relations specialist wouldn't do it for me. So here's what I ended up doing:
After my computer was in the shop for three weeks, I called customer service and requested transfer to customer relations. The CR rep would only say that it wouldn't be much longer and I couldn't have a replacement at this time. Then, I hung up and called again, got to a different customer relations specialist and my request was refused again. I left messages if I couldn't get through. My calls were dropped twice. After three CR reps and two messages I had given up. Then, my call was returned by a CR rep willing to help me; bless his heart! A replacement was shipped the same day and my 2.0 Gz core duo MBP runs cooler, and has lasted longer than any previous repair. Motion works fine too, although I'm a little afraid to try the specific conditions which caused it to crash on me in the first place because I can't afford to be without this computer right now.
If you have a 1.83 Ghz logic board in your MBP, get a replacement because all of those boards are defective... It seems to have something to do with the video card interface based on the fact that the MB's with the 1.83 Ghz boards are fine and they have built in video. (An electrical engineer's best guess)
As a side note: Apple accidentally sent me both a replacement 2.0 Ghz and my repaired 1.83Ghz. I did a side-by-side test to determine that indeed the 2.0 do run cooler. Also, there was a glitch in the ambient light-sensor of the 1.83 ( it didn't turn on/off the keyboard back-lighting reliably when room lights were turned on/off) where the 2.0 performed perfectly. Given a choice of which one I could send back, I opted to return the 1.83.
Good luck Blixt, I hope you find this discussion helpful!

Applying filters to pdf files in Motion causes pixelization-why???

I have a mult-layered map of Europe made in Illustrator and all layers imported as separate pdf files in Motion 4. But when I apply any filters to the pdf files…they become severely pixelated…they look terrible.
How come this only happens with pdf files and not with any other format.
Can pdf files not handle effects of any kind in Motion?

Assuming you are scaling up your vector layers and you have fixed resolution turned off. Applying a filter rasterizes the layer before it gets transformed, i.e., scaled - that's the reason. The solution is to apply the filter to a group containing the layer so that it is scaled first, then the filter is applied.

Is color management in Motion causing me grief?

I'm stumped after looking through support docs and here in the forums, but I'm having problems getting correct color to come through on objects/layers. Here's my problem at a base level (it has other manifestations):
1. Add a color solid (solid1) set colors to R: 205 G: 5 B: 253
2. Add a new color solid (solid2), shifted up in the frame so solid1 is visible. Click on color swatch for solid2.
3. Sample the color on solid1 to apply to solid2
Shouldn't these two color solids match? They don't. I get R: 205 G: 6 B: 233
I figure this must be some color match issue......solid1 is fully opaque with no strange blending modes and such. For instance this also happens if you set the background color and try to match the background color.
Motion also seems to be changing the color of bitmapped graphics I bring in as well.

I'm stumped after looking through support docs and here in the forums, but I'm having problems getting correct color to come through on objects/layers. Here's my problem at a base level (it has other manifestations):
1. Add a color solid (solid1) set colors to R: 205 G: 5 B: 253
2. Add a new color solid (solid2), shifted up in the frame so solid1 is visible. Click on color swatch for solid2.
3. Sample the color on solid1 to apply to solid2
Shouldn't these two color solids match? They don't. I get R: 205 G: 6 B: 233
I figure this must be some color match issue......solid1 is fully opaque with no strange blending modes and such. For instance this also happens if you set the background color and try to match the background color.
Motion also seems to be changing the color of bitmapped graphics I bring in as well.

What causes blurred video, I'm using a 1411

I am using a VCR as my video source. Using a HL Grab acquisition. Performance is great. Once in a while my image gets blurred. I'm including a sample. Also, I am seeing a bowing of the image toward the top. What can I do? Thanks!
Attachments:
Clear_video.jpg ‏38 KB
Blurred_video.jpg ‏41 KB
Video_bowed_at_the_top.jpg ‏30 KB

The blurred image looks like the odd and even fields have been reversed. I'm not sure why it happened though. The bowing at the top of the image is related to the timing signals. I suspect both are related to using the VCR as the source. VCRs do not produce high quality video signals by nature. Perhaps a higher quality VCR would help.
It might be worth running the same section of tape twice to see if the blurring occurs on the same frame every time. If it does, it is something on the tape. If not, it is the VCR.
Bruce
Bruce Ammons
Ammons Engineering

Motion 4 blures central part of frame with DOF is ON

Hi everybody!
I'm jumping from photo to photo with Framing Camera Behavior. These pictures is flat and perpendicular to camera's axis.
But central part of each frame is blured always. Is it Motion's error or something wrong with my settings?
Sorry for big screenshot.
Thanks a lot!

The Link to Screenshot is lost : http://s017.radikal.ru/i422/1203/dc/922f1edaeb3e.jpg

How to get rid of motion blur

I wasn't sure how to get rid of motion blur off my pictures. I saw this prototype that they showed to the audience at the Adobe MAX 2011. I could not believe the result! It was absolutely perfect! When would they finally release it, or have they already released it and that I didn't realise? If they would not release it, why wouldn't they when it showed the perfect result? Are there any alternatives I could use?

In PS CC you can minimise the camera motion blur(photo taken with shaky hand ) but you can do nothing when subject itself is moving and caused blur in photo

Motion blur track not working with me on adobe premiere cc update

i've updated my adobe premiere cc on my imac. i can't see the shape button or the play button on my effects if i want to use motion track blur or mosaic or any of effects on adobe premiere cc.
help me please!!!

i have adobe premiere cc v7.2.2
updated yesterday. still i can't see the play and shape button in my effects. as fast blur.

Capture problem -- blurred motion every 4th frame.

revised posting to an earlier question...
any of you fcp folks ever experienced a capture phenomenon where every fourth frame of a captured 24p (2:3:3:2 advanced pulldown removal) clip was BLURRED by thin horizontal lines WHEREVER THERE IS MOTION WITHIN THE FRAME? this results in a stilted "jerky" motion when the clip is played. other words, a character moves an arm-- every 4th frame of that movement is "blurred" with these thin lines.
i'm shooting an xl2, at 24p advanced, 16:9. 1/48th shutter. capture is set for dvntsc 23.98 with 2:3:3:2 advanced pulldown removal and 16:9 anamorphic.
strange thing is, i've captured and edited 21 reels clean, without this problem. then had a capture issue where a few clips, for some reason, captured at 29.97 so i reset my capture settings as above and captured these clips again. since that time (the last two reels of shot footage) i've had this bizarre fourth frame issue crop up where the motion is blurred by these lines. something's going on but damned if i can figure it out.
few forum guys have offered help but nothing that's solved the issue and the question is now buried so... here 'tis again. thanks.

Some basic questions:
Have you upgraded to iMovie HD 6.0.3 (v6.0 had jerkiness in its PAL export)?
Have you set iMovie video preference to the same standard as your camcorder (PAL = 25 fps or NTSC = 29.97 fps)?
Is FileVault turned off?

Motion file missing data after MM export

Hello,
after finishing a project I exported it using Media Manager. When I reopened the newly created project, I noticed that all Motion clips where missing the video layer.
I used Motion to blur out some faces and the blur is still there but I'm missing the video track (its just red checker box).
I fortunately still have the original project to export the clips manually but can someone tell me what I should have done differently, please?

Nada don't think. Motion project files with "embedded" video aren't managed by Media Manager.
Jerry

Motion 2 freezing my system momentarily?!

Why does Motion freeze my system just for minutes at a time? No rainbow wheel just freezes all activity except the mouse movement. I know its Motion cause it only happens when its open. FRUSTRATING!
QUADCORE 2.5 G5 Mac OS X (10.4.5)

I know its Motion cause it only happens when its open. FRUSTRATING!< </div>
It's almost impossible to guess from where we're sitting.
If you're NOT getting a spinning cursor try opening Activity Monitor and see if you can get a feeling for anything that might be happening on the system. Try searching the forum for "slow down" or similar terms, we've had many threads over the months and they are all different. However, most are from folks who have a rainbow cursor.
Additional questions, did Motion ever work well? Did you install all of the resource data files?
bogiesan

After Effects Transform Effect is there something similar in Motion?

Is there a way to something similar to the AE transform effect to offset the motion caused by the displace filter.
Example here:
http://www.videocopilot.net/tutorial/disintegration/
Starting at time 8:06
Thanks
Andrew

Interesting tutorial, thanks!
Here's a quickie Motion version covering the basic concepts they use. I didn't have a texture handy and I wanted this to be self contained, so I used the Cloud generator. I animated the gradient in a gradient generator to get the wipe, substituted Gradient Colorize for "Colorama", Underwater filter for "Turbulent Displace", used behaviors instead of keyframes, etc...
I hope this gets you started:
Disintegrator Movie.
and the Project.
come back with any questions...
Patrick

Mi Iphone 5 takes pictures blurred

Hi community i few weeks ago my iphone 5 have been taken pictures blurred, i dont know how to fix it, if anyone can help me ???, i restore my iphone with the original settings i deleted everything but the problem still there, any ideas??

A few things that can be a factor in causing blurred photos are the following:
Are you using a protective case on the device?
Are you using a protective film on your screen, or the device?
Has the device been in contact with any sort of liquid?
Do the forward and rear cameras produce the same blurred quality of photos?
Does every picture you take turn out with this blurred quality, or just some of them?
Depending on the answers to these questions theres a few ways to move forward in troubleshooting, although uncommon it is possible you have a faulty camera, until these few questions are answered it would be really hard to say what the issue is

New card that works with motion 2?

I tried to install FCP studio in a Power mac G4(firewire 800) but couldn't install Motion cause the graphic card doesn't support it. I need to know what card can I install in order to use motion 2, any sugestions? I dont need anything expensive just one that works well with motion. My mac now uses a GE Force 4MX 64 mb.

I don't know anyone selling new cards for this system, here's some on eBay.
Check for compatibility with your specific system...
Patrick

Exporting SD DV to FLV - pan has horizontal blink

Hello all,
Source: SD DV, VOB - DV
Premiere CS4
I have encountered this problem. I'm trying to export my project to an FLV file in many various settings. Everything was quite all right except some pan shots, shots with camera movements have some blinking horizontal lines, not too much but visible (I hope this is a good description). Those lines are not apparent in the source footage. Only after export.
I've tried:
all of the field options (deinterlace, remove flicker and all of the others), removing blending frames, different bit rates, frame size, frame size as a multiplication of 16, frame rate as source, 25 fps.
I'm still about to try f4v, 2 pass and CBR...
Perhaps if you add a slow motion effect, blur or anything else?
Has anyone encountered this phenomena? Does anyone have a clue as to what the solution to this may be?

Hi
Maybe this is what's happening...
Your source stuff is interlaced and your export is progressive. In essence you lose half your horizontal resolution when you do that...as you are going from having two fields per saved frame to having one "field" or "frame"....
The difference wouldn't be that noticeable when there is no motion cause the lost field in translation isn't going to be that noticeable when there's not a lot of movement ( action )...
As the action increases ( this could be the camera moving or the talent (subject ) moving...amounts to the same thing..." movement "...sooo, when that happens in the export ( the way the codec interprets the frames )...you could get some ....
1) artifacts
2) flashing horizontal lines...which is basically the "missing" information" ..
Normally your source video and your export video would be the same...for the best product
If you half the size of your export file ( say from 720x480 to half the size ) and go progressive from interlaced you have a much better chance to not see any artifacts and missing information....
It's actually a tribute to Premiere that it can complete this kind of export and deal with such disparate circumstances....
Rod

Motion causing blur

Similar Messages

Maybe you are looking for