Motion drop zones not behaving

I have drop zones on a canvas x 4.
I have made this "Fit" setting.
The drop zones are not all the size of the footage for example one of them is really tall but thin.
When I place it in the fcp timeline the drop zones shrink to accomadate the footage.
Shouldnt the footage fill the drop zone wih the edges of the footage that don't fit being cut out?
I have tried "stretch" as a drop zone setiing and it distorts the aspect ratio of the footage. Centre looks no good either.
Can anyone help?

"Fit" means that the footage will be shrunk so that it completely fits inside the dropzone. This means that if the aspect ratio does not match, it will basically either letterbox or pillar box the footage.

Similar Messages

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

How do I resize an image within a drop zone (not the drop zone itself) in motion 5?

I think others would be able to help if you describe a little more why you'd like to do this. Given that drop zones are a way of passing images into Motion that you want to manipulate, resizing a drop zone is the equivalent of resizing the image.
If you're having a problem with an image from Final Cut being too big or too small, select the Drop Zone in the inspector and make sure the Fit parameter is set to 'Fit' - 'Center' will result in images dropped not being scaled to fit the Drop Zone. 'Stretch' will force the dropped image to fill the space defined by the drop zone,
If the image is already cropped and scaled up in Final Cut Pro, that is the information that Motion gets - you can't scale down the image to see more of the edges that have been cropped off.
If you want more than one copy of the image passed via the drop zone, use Make Clone Layer from the Object menu.

Image in drop zone not sharp

Using a DVD SP menu template, I have dropped images into button drop zones. The .jpg files when viewed in photoshop are much sharper than when they are seen in the DVD menu format, even though the images as button images are even smaller than when the image is viewed outside of DVD SP. The unsuarp image stays there when I burn a DVD and test on a television or TV screen too, so it's not a matter of how it looks in simulate.
Any ideas on why the drop zone images are not sharp / how to solve to problem?
Thanks in advance.

Hi Pamela
Have just had a go at this operation on a brand new project and I did not get any of the problems you mentioned both as buttons and drop zones, have you tried it out in a brand new project to see if you get the same results as before, also you could try saving your files as a TIFF from photoshop to see if that increases the quality of what you get from a jpeg.

Themes; Photos in Drop Zones Not full size

Please help. I'm trying to drag photos to the bumper drop zones but they won't appear full size. I've used several bumpers in my iMovie project already and this is the first time it won't work. Can anyone help me fix this problem?
Angie

Update - I realized this phenomenon is only happening on my current project, not any new projects. I tried "save as" to see if that would correct that problem, but no luck. Any thoughts?

Photos in Drop Zones not visible

Hi,
I recently purchased a refurbished iMac and have used iDVD previously, but am having trouble with it now. It's my first attempt at iDVD since I bought the computer. I'm using a 6.0 theme, Reflection Black. When I drop photos into one of the eight drop zones, the zones go black. I can see in the drop zone editor area that the photo is loaded, just not visible. The twist is that the first time I use the photo it works. But if I try to drop it in the second time, or close the saved draft and then reopen, I get a black image where the photo should be. I've searched on the help topics, and can't figure it out.
Thank you!

You're right. There's not alot of info available on this particular issue regarding invisible slideshow photos. So let's try the following.
You say the photos are showing in the drop zone editor nevertheless ..... correct?
What happens when you add a transition (simple 3 second dissolve for example)?
If that fails to help then add music as well and then set the slideshow to "fit to audio". Post back with your results.
Message was edited by: SDMacuser

Motion Drop Zone template question

I am using a drop zone template to make a short promo video. I am trying to figure out how to transition from the drop zones flying in to open the video full screen to play. So the effect I want is a bed of music and the motion template flying in 6 drop zones. I want to see a drop zone expand into like a 20 second spot and then fly the drop zones again, pick a different one to expand into the full movie and so on. I have about 3 minutes to make this promo. I am using Final Cut Studio 3 and Motion 4.
What behaviors is there in Motion to do this or do I need to just bring in the motion file into FCP and use some sort of transition there?
Jeff

Which template are you trying to use?
I'd maybe do it this way...
1. Create the project in Motion using a frame that is twice the size of your editing format in FCP. If you're editing DV in FCP, use one of the HD templates. If you're using HD in FCP, you'll need to change the properties of the project to about 2160 pixels high. but the dropzones should be able to hold a full size clip.
2. Render it all out full size.
3. Import it into FCP and drop it into your timeline, set it to 25% or 50% scale, don't let FCP scale it to fit the sequence.
4. You will be able to use the scale and position (center) keyframes to zoom in on any single dropzone to fill the frame at 100%.
That's just one of many simple ways to do this without using a camera in the template. If you're new to Motion, save that for a later project.
Mark or others will have more interesting suggestions later.
bogiesan

Photo dragged to drop zone not resized

iDVD is supposed to automatically resize photos dragged to drop zones to fit the screen. Not so. The photo I dragged was cropped and enlarged. How do I fix it?

I also had this problem and it was only by chance that I decided to use a still image from my film to use in one of the drop zones (from iMovie). This photo fit perfectly in the narrow portrait drop zone. I opened the photo in Photoshop to discover the size is actually 960 x 720. I created a new image with these dimensions and placed my desired image in the exact middle of the display. Voila!

Drop Zones Not Appearing

The drop zones on the main menu of the DVD do not appear. I open the Drop Zone editor and it has a box for the Menu, but not a box for the drop zone. However, the sub menus are the same theme and have drop menus. I have tried Command-I and click the box at the bottom, but nothing.
Please help. Thank you.

That is so strange. I have drop zones on the above iDvd'08 theme that I can activate with a simple check mark or get rid of them by unchecking the same box.
If your software isn't allowing for such an option then I'd consider re-installing iDvd'08.
You do know that after you check or uncheck that tiny box at the foot of the inspector, that you then need to click on the screen which then activates or deactivates the drops zone/s. At least that's the way mine works. For example ....
Click Here
Btw ... before you do any re-installing of this software, please try a separate user account and launch iDvd from the new account to see if this duplicates the very same behavior or not.
Good luck on this and I'll check back with you later. (Wife and I have a date).
Message was edited by: SDMacuser

Drop Zones not showing

I have a student who is using iDVD from iLife 08. She has put pictures in the three drop zones and added the movie. In the preview, everything looked good. Drop zone pictures showed up, music played, movie played. We burned the DVD. When we play the DVD no pictures are showing up in the drop zone. We are using the water droplet one and it just shows the drop and the ripple but no picture. We have thrown the project away and remade it three times and it has happened each time. Anyone have any ideas of what is up with this?
We are using macbooks to create these.

iLife 8 will not run under Tiger/ Do those Macbooks meet the requirements?
iLife 8 System Requirements:
http://www.apple.com/ilife/systemrequirements.html

Motion Drop Zone pdf template - not updating in FCP X

In Motion 5, I add a PDF as an image type,
Then, make a RIG for the Media|Page Number slider.
All this works well, and well in Final Cut Pro X....
Until...
The user (In FCP X) drops another PDF -
The PDF works fine, but the Page Number slider doesn't resond, and is set to the number of pages of the original file.
Is there a work around for this?
Thanks
Rob

Thanks Alex...
I dropped a PDF with multiple pages into
Final Cut Pro X...
and then onto the time line....
when I PLAY it, it goes through the pages...
So, I'm not sure what you mean when you say "single image".
I may be stuck with dropping my PDF in Motion... then all will be well, and my Rig,
in Final Cut can indeed navigate through the pages... and even be key framed to the page I want.
Rob

How to import all of the drop zones not just 2

I'm trying to import photos into "road trip" theme and on the open page it only lets me import 2 photos but the others remain. I want to import more photos instead a "motel" sign, a shot of an RV or even the photo behind the "title 1." How can I cover those or at least get rid of them. The "motel" has nothing to do with my "Road Trip" movie I'm making.
Please respond here and [email protected]
Thanks,
Ross

I kind of thought that, I just didn't want to believe it. Hopefully they will come out with some more themes other than the few they have.

Drop Zone Issue

Since updating to FCPX 10.0.6, Both Titles, Transistions and Gernerators that came with final cut and one's I have made myself do not allow me fill a Drop Zone with video. It fill's the drop zone with a Still from the last frame of the video clip I inserted, instead of playing the whole video clip. It worked prior to the upgrade and is something I use on a regular basis. Any Ideas? I've also tried on HD and SD Projects, I'm running the news update of Mountain Lion, and I have 16 iMacs with the same issue.

Drop Zones have been improved in 10.0.6, so I'm sorry you are having difficulties. Motion Titles and Generators (and I'm sure Transitions) with drop zones now behave as expected -- i.e.: dragging out the effect clip will no longer change the playback speed/retiming of the drop zone media, nor will it be limited to the original length of the effect as it was before; which means, you can drop a clip and resize the template to accomodate the playing length of the clip without sacrificing the timing or a predefined "out point".
There is a recommendation for "best practices" for upgrading to 10.0.6 (http://support.apple.com/kb/HT5550?viewlocale=en_US&locale=en_US). I think it was incomplete (at least it was in my case) because of the preferences issues that came about. You can try to delete preferences, but I ended up doing a complete "fresh" install. I followed these instructions: http://support.apple.com/kb/HT5149 to remove any and all possible problem files.
*My* issue was mainly that none of the text boxes I published from Motion would appear in FCPX. There was also another "presumed" issue which turned out not to be one: Anamorphic Override (apparently ONLY appears for SD media and not for 1440x1080 media... maybe next release...)
So, try deleting preferences first (http://www.digitalrebellion.com/prefman/) and if worse comes to worse (and I hope for your sake it doesn't come to this!): do a fresh install... that should clean up any issues you might be having.
HTH

Images disappear from drop zones

I'm using the "Bands" template, and I'm adding a photo to 3 different drop zones: the first one (the animated one) works fine. But when I add a photo for background on either the menu or "extras" page, it goes in fine, turns black and white and has the shading around the top edge, but when I click on another page in the DVD and back to these two pages, the image is gone and it again says "Drag Photos or Movies Here". Any ideas? I'm using 7.0.4, don't have any compelling reason to upgrade to 7.1 unless this bug is fixed there...

Hi George
Sorry to hear you are having issues with iDvd regarding background and drop zones not staying with the images or photos you picked. I just tried the very same thing you described above running iDvd 7.0.4 on a Dual G5 2.0 Ghz and I cannot duplicate this issue. Mine runs fine and exactly as expected. All choices remain in place. So I'm not exactly sure what's going on with your own particular configuration. But like you I don't recommend updating unless this issue is first addressed in the next update. My feeling is that it won't be. What you may want to do if you haven't already is dispose of the plist for iDvd. Go to your HOME folder > Library > Preferences >
com.apple.iDvd.plist
Drag and drop this file to the trash or to the desktop and relaunch iDvd.
Come on back if this fails to help. Please also let us know exactly how much available hard drive space is remaining on the boot volume (your main HDD). You may also want to repair permissions at this time from apple's disk utility.
Good luck!
Message was edited by: SDMacuser

Fitting or resizing a photo in a drop zone

Is there a way to resize a photo in DVDSP. I have a logo that I want on my menu. It was given to me as both a jpg and psd. I tried putting either in the drop zone. Only part of the image appears in the drop zone. When I enlarge the drop zone I can get the entire image to appear, but then it's as wide as the menu screen (I just want it in a corner). I tried importing a smaller version, but that does the same, but pixilated. Is there a way to get the image to fit the size of the drop zone, not the other way around.

select then click & drag corner handle to size picture
select then click & drag in picture to move
shift alt then click & drag in picture to move picture within the drop zone frame

Drop zone of loop in the film stip template, works in simultor, not burning

Droping a loop from the film into the drop some in a chapter menu and it shows up on the simulator. when I go to burn or build etc there is just white where the loop should be. everything else is workinng fine just but no loop- any ideas out there?
thnx

OK bigger problem- the all NTSC DVD that used the same template [film strip] also had no problem in the simulator, but I just build/formated it, and the drop zones in the menu buttons whent all white again- same as yesterday. I also checked and they were all software based in the menu prefs. something is wrong here, there is like a "flash frame" of the first frame of the loop, frozen for a split second. and then when the motion starts it all goes to white in zone. I am really flumixed here, did I change something in the targets or is it still burn realted? but why does it work in the simulator, like a charm and then it does not burn????? FRUSTRATED

Motion drop zones not behaving

Similar Messages

Maybe you are looking for