Motion export audio short

Hi,
does anyone has this problem of motion exporting audio shorter than the movie. it's in sync but the audio got cut off few second before the movie end.
48KHZ 16bit export as the original audio media.
also try 44.1 but still not working.
thankx
JP
PS: had also tried export audio only, still got cut off before in & out

Never mind,
it's solve.
I have to export as DV movie with 48KHZ. cannot make it a custom DV movie
DUNNO y
thankx
JP

Similar Messages

Logic 10.1.1 exporting audio to movie...

There are two boring troubles:
1. Sometimes after exporting audio to a piece of movie (using locators) I hear my sounds but I see only a white screen!!!!
2. Sometimes after trying to make a short piece from the whole movie (using locators) I got the whole movie in (instead of a short piece) and my sounds start from time-code 00:00:00...
What am I supposed to do with those???
Thank you!

I have the exact same issue. I'm running Mavericks. My friend that has Mountain Lion has no issues.
Although I thought all it was doing was cutting off 4 frames in the front. But it sounds like you're saying it shifts the whole track by 4 frames, which is even worse!
Apple, fix this, please!

Logic 9 "Export Audio to Movie" command

What happened to the "Export Audio to Movie" command that used to be under the file menu? This is something I sorely need back.Trying to import audio into Motion 5 is not working out well - even with rendering set at the lowest settings (same with FCP10). I like to be able to see my results as I'm working, not watch choppy playback and guess where to drop in the audio. I'm running an 8 core Mac Pro with 32 G of RAM and I'm wondering if anyone has used a good work around for this problem. I wish I never updated.

I just used Quicktime Player to open the movie and dragged a bounced down version of my Logic audio on top of it. I "Saved As" and it worked fine!

Problems with exporting audio music video to QuickTime

In iMovie I made this audio music video, combining music with photos and audiovisual clips. In iMovie I muted the original sounds of the photos and audiovisual clips. Yet after exporting the audio music video to QuickTime, parts of the original soundtrack can still be heard, some of it in the right place, some are scattered out at random. I have exported audio music videos from iMovie to QuickTime before - consisting of music and audiovisual clips - and then I had not theses issues. Can somebody explain to me what I can do to mute the original soundtrack in QuickTime? I don't want this original soundtrack to spoil the audio music video when I upload it to Youtube.
Thanks in advance

There is a bug in iMovie 09 that produces weird audio artifacts when you use speed changes (fast or slow motion) that do not conform to the preset tick marks of 25%, 50%, 100%, 200%, 400%, 800%, etc.
If you are using custom speed percentages like 58% or 139%, change them to one of the presets, and that will fix the sound.

Export Audio To Movies issue

Hi folks,
In Logic X, I can't seem to export audio to movie properly. When I click the "Export To Movie" it seems to export a short section from wherever the cursor is, so I tried moving the cursor to the start and no difference.
So, I then used the cycle area to select and export the whole track, which it did - but without the video! When I play back it's just darkness!
I had no such problems in Logic 9 - am I going mad or has anyone got any solutions?
Thanks!
Ben

Well the temporary workaround I found right now is to use the sample delay plug-in on the output 1-2 channel. Actually needs 2 instances. The mas setting is around 10000 samples. I think in my situation, the video is around 8 frames late. So I set th combination of plugs to delay the audio by around 12800 samples. Upon exporting, the sync between audio and video is close enough.
This is just a workaround. I hope apple fix it for the sake of users using Logic for score to picture purposes.

Export Audio to QT Movie -- Expected Behavior and Other Questions

In the past I've reported that the Export Audio to QT Movie function didn't work correctly in LP 7.1.1. Well, it still doesn't seem to work correctly, but this time around I'm at least getting some kind of result. It would be kinda cool if I could get it to work according to play.
I'd like to get comments on this procedure, i.e., what kind of behavior should I expect; am I doing something wrong, etc.
• The movie (25 minutes long) starts with a 19-second slug (no timecode burn) followed by first picture with timecode burn starting at 00:00:19:00
• Movie Start Time = 00:00:00:00.01 (the extra bit is to work around a bug)
• SMPTE time for bar 1 1 1 1 = 00:00:19:00
• L & R locators set to the position & length of audio I want to export to the movie (L = bar 1 and R = bar 14)
• Cycle = ON
• Selected a single region of audio (track 1, outputs 1/2)
When I invoked the export function, I was presented with a dialog:
Immediately I notice that there is no 24-bit option (comments?)
Then I encountered this message:
The file listed there is the dialog track for the movie. No problem there. Now, keeping in mind that my file is only 13 measures long (at a fairly fast tempo),
Logic then performed a very long "bounce" procedure, followed by a long "converting" procedure, followed by a "saving" procedure (in which it was writing the new QT movie file).
In the resulting movie (which BTW was the full length of the film) the audio was waaaaaaay out of sync. But aside from that, is it normal to expect that the full-length of the film will be exported? I was expecting that perhaps only the first 13-measures-worth of movie would be exported. (comments?)
So I tried again. This time I moved the song end marker to bar 14 and invoked the export function. I got all of the same dialogs as above, but the "bounce" procedure took no time at all. Neither did the "converting" procedure. I expected this, as now Logic was set to think that the song was only 14 measures long. But the "saving" procedure took as long as last time.
In the resulting movie (which was again the full length of the film), the audio was again out of sync, though not by much. Still unusable tho. Again, should I expect that only a short clip of the movie would be exported? Or, should I expect the full length movie to be saved? (comments?)
-=iS=-
P.S. BTW, the reason my movie start time is set to 00 and not 19 seconds is because... well, that's the subject of another thread, but save to say that the above settings were the only way I could get first picture to line up with bar 1 of my song.

Thanks for your reply George.
I normally use QT Pro to embed audio into picture also. Thought I'd try this route one more time tho.
Regarding my movie start time, I'm finding that if I set my movie start time to 19 seconds (where the burn-in first becomes visible, and which is indeed 19 seconds into the film), my SMPTE offset has to be 38 seconds. This means that Logic's t/c counter doesn't jibe with the film. So to make it so I have to enable the SMPTE view offset in the synchronization pane. But enabling it there doesn't automatically switch it on for the Giant SMPTE counter transport display.
Anyway, back to the subject at hand. I'll try the settings you suggested and see if that makes a difference.
Bouncing a chunk of movie always works perfectly here <<</div>
Can you clarify something? I know you said that you end up with a null file when you try the export thing, but in your above statement, did you mean that when you've tried this that it did in fact export a chunk of the movie, but without audio?
Cheers!
-=iS=-

Logic8 will not let me Export Audio to Movie

So...I have had another weird one.
Normally (in LP7) when I am working with a movie file that has audio attached to it and I want to Export Audio to Movie, Logic brings up a screen before it bounces which shows me what audio is currently attached to the movie and gives me the option to exclude or include that audio in the bounce. Since going 8 that window does not show up. Ever. Logic mixes what I want to bounce with what is already on the movie.
Anyone else having this problem?

I've solved my problem!
First I tried to export audio to a "Apple Motion JPEG A, 768 x 576, 16,7 Mill." Movie - that doesn't work! After converting the reels to "H.264 Decoder, 720 x 480 (853 x 480), 16,7 Mill." - exporting works as before :o))
Try it...

Export audio to movie issues

Hi there,
I have done a surround audio track for a short movie in Logic x and now that I want to export audio to movie the dilouge that opens does not show the preset popup menue while in the manual it has a creen shot that shows this menue in the same dilougue.
This is from the manual:
Do you know what my problem is?
Thanks,
Marjan

Hi,
Foe what it's worth, the dialog window I get here doesn't look like the one in the manual either.
J.

Motion 5 audio keyframe not rendering

Hi All,
I have a project in which I'm using keyframes to control audio level. The first two keyframes work ( level goes from normal to -18 ). The keyfrmames near the end do not work ( level goes back up to normal for a few seconds, then down to -96 for a fadeout effect ).
It sounds fine in Motion, but when I export to Movie it does not render.
I've already trashed the prefs.
Any help appreciated - Vijay

Audio in Motion has always been a bit iffy - I would do your audio editing elsewhere, like STP or FCP. Then bring it into Motion. Or try exporting audio only, if that works, bring in the movie and replace the audio.

CS4 not exporting audio with video

For a while now I've been working on a video for my class, mish-mashing together a bunch of smaller .avi files into a cohesive whole. Everything inside of Premier works perfectly. I edited the audio tracks with Soundbooth, so now they are .wav. When I export the video, first I tried MPEG4 and messed around with a lot of settings. After this didn't work, I searched around and discovered that Premiere occasionally doesn't like it when you change the pre-set settings, so I switched to H.264 High Quality and exported with that. Same deal: the video works fine, no audio. And yes, I made sure to check the box that says "audio and video" and not just video.
In short: How do I get Premiere CS4 to export my audio and video when I tell it to?

I used no special setting. I even tried to just export audio. Still no audio. I checked the file with GSpot, it shows that it has audio.
Then I though I just went ahead an encode this and output to DVD as a test. It is indeed still no audio when playback on home dvd player.

Garageband: exporting tracks shorter than 5 seconds

In Garageband I'm trying to export audio tracks that are not much longer than 1-2 seconds long - really short projects! - but when I do export them and then play them in my iTunes they are now about 5 seconds long. This is a bit lengthy for what I want them for. Is there any way of exporting a project that can be any shorter than 5 seconds? Anyone know?

thanks for the 'oddball' pointer, and the 'zoom slider' thingy! I didn't know about these things. I tried them both and I really thought I would get it working this time but for some annoying reason my 1.5ish second project always exports with about 3 extra seconds of blank play time at the end. ARRRGH! It's always the small problems that really get me!! Thanks for all you're effort so far!!!!!
THE STEPS I TAKE:
1. I make sure the orange track is pulled back to 0 secs
2. I press the cycle region button [the button with the two little recycling/circling arrows(which is right next to the play and skip buttons)]
3. I use the zoom slider (very useful!! thanks) and then adjust the orange cycle region [which appears on the beat ruler] so that it is the same length [EXACTLY] as my 1.5ish length track.
4. I try to pull the little end-of-track marker [the purple arrow] back [to the left] but will only come as far as 14:00 seconds?? weird!
5. Then finally I go to 'Share' in the menu bar and 'Export Podcast to Disk...'
6. I double-click my exported .m4a file which opens automatically in my iTunes but "lo and behold!!" it's no longer a 1.5 second track but a 5 sec one!!!!!!!!!!!!
I want to keep my 1.5ish sec track 1.5 even after it is exported. Is it possible?
My Garageband keeps adding those extra 3 seconds on the end when I export!!!!???
Is there an option I haven't selected?

What is the difference between"export audio and "bounce"?

What is the difference between the "export audio" and "bounce" functions?
Do plug ins get saved with the created BWF(broadcast wave files)in the "export" function?
Or is the "bounce" method the required function to enable plugins embedded in BWF files?
Also I noticed that the "convert to SDII file" produces files not readable by ProTools.
It was my understanding that using the convert to SD II files via the audio bin is used, it would produce BWF files for use in Protools.And if you use symbols like / in your track names the files won't get converted or bounced!
Also would it not be cool if LE8 had a feature that could render BWF files small enough to send via internet file sharing and transfer apps, in other words a built in file transfer feature. Am I asking for too much.

Export audio is good to move the tracks to another application or computer for further editing.
Bounce renders the mix into a stereo track in 2 basic ways: PCM, i.e. uncompressed, or compressed (like AAC, mp3 etc.).
PCM can be AIFF, Broadcast WAV (even if it's written only WAV those are BWF), and SDII that's the standard file type of ProTools.
Note that PT doesn't use interleaved stereo files but two separate files for left and right channels, i.e. filename.l and filename.r and if you save in this way PT will accept those files for sure.
Uncompressed audio files cannot be compacted (in fact, that's why they're called uncompressed).
These days there are a lot of Internet services that permit to transfer several Gb (up to 5) for free.
If you are thinking of something like Digidelivery then you should put your attention towards Digi's products, not Apple's ones.
cheers
rob

Media Encoder/After Effects CC 2014 Only Export Audio

I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000

I've been having a strange problem with Media Encoder CC 2014 & After Effects CC 2014. If I try to export a comp either through Media Encoder or directly from the After Effects Render Queue then it only exports audio. If I bring the AE Comp into Premiere and export from there either by sending it to Media Encoder or exporting it directly from Premiere then it exports fine and gives me audio and video.
Windows 7 64
i7 950 @ 3.07GHz
24GB Ram
Quadro 4000

Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
Alexander

Here are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

Export Audio to Movie - where is that function in Logic 9?

I have noticed that a very useful function in my Logic Pro 8 (version 8.0.2) options/movie/export audio to movie is not found in the Logic 9 version. One of my friends has this version (and an Intel Mac) but I cannot help him working with music and video - I cannot find it anywhere in the Logic 9 menus. Can you help?
Best, Peter Danstrup

I just opened a quicktime movie. Added an audio track, and am looking for the option indicated in the manual: "Choose File > Export Audio to Movie". Upstream it's indicated that this option only appears if a movie is present. My movie is present, but still this option does not appear?
Ideas?
-- Gerry

Motion export audio short

Similar Messages

Maybe you are looking for