Motion "Field Order" setting not being honored by Final Cut Pro

I was having a doozy of a time bringing Motion files into a Final Cut ProRes 4444 Timeline (the entire project is basically motion). While my field order in both Motion and my Final Cut sequence was set to none, Motion text and graphics became blurry once I dragged them into Final Cut. I finally realized that (after stumbling upon this post http://discussions.apple.com/thread.jspa?threadID=1967373) that Final Cut was resetting the field order of the Motion project to Upper. It was said in this post that this was a bug. As this post was from April 2009 and it seems to still be happening, I'm assuming the bug hasn't been fixed, but does anyone know of a workaround avoid having to go into each Motion file in the timeline and switching the field order manually? Thanks!

AFAIK, you have to switch them manually. You can select multiple clips, do ⌘9, then in the multiple selection window, right click on the Field Dominance and one at a time, set it to None (or whatever you need). It's pretty quick.
Patrick

Similar Messages

  • Changes in Soundtrack not being sent to Final Cut Pro

    I am editing in FCP and trying to use Soundtrack to edit the audio of my mov files. I am sending the audio to Soundtrack as a project. i edit the audio then save the file in Soundtrack but none of the changes I make are showing up in Final Cut Pro. I have Final Cut Studio 6. What is going on????

    hey there MHASH,
    sounds like you're using Soundtrack Pro. this is the Soundtrack Discussion. you should post your question in the Soundtrack Pro discussion.
    good luck.

  • NoViewOnDrive Setting not being honored in Common Save Dialog

    To restrict access to my C: drive from users using the Common Open/Save dialog, I set the decimal value of the
    NoViewOnDrives registry key to 4. This works well generally and if a user types in c:\ they get a message indicating that such access is redistricted. However, if they enter in c:\users\%username%, it brings them to their profile folder and
    allows them to save (naturally as they have write access to their profile). 
    Q: Why is the NoViewOnDrives setting not being honored for C:\users\%username% yet it is for other paths such as C:\ and C:\users ?

    Hi shocko,
    Based on my test, the scenerio is as you stated. We can access the profile via inputing c:\users\%username%and can creare and save new file. Although you Prevent access to drives from My Computer, users still have right to save files to their
    user profiles. 
    The easy way to prevent users to save data on a location is set folder redirection policy, redirect users’ desktop to a network share where users don’t have write permission.
    Create a network share on your server, but don’t grant write permission for domain users group.
    Hope this helps!
    Regards,
    Lany Zhang

  • My media is not being recognized by Final Cut! HELP PLEASE!

    My media is not being recognized by Final Cut it was there yesterday and today it is not recognized by FCPX
    it looks like this now>>> but it is I cans see it in Finder and Quicktime? HELP PLEASE!

    That's a compound clip. Not sure what you've done, but that's not a clip icon. Where did this media come from? How did it get into your computer? Is it really HDV? Was it captured using FCP?

  • Can i set a default transition for final cut pro x

    Can I set a default transition for Final Cut Pro X? I'm doing a multicamera edit and would like all edit points to have a cross dissolve transisiton. Can I make this happen by default?
    Thanks!

    Cross dissolve is the default transition. It's applied with Cmd-T.

  • How do I order vouchers for Certification Exams for Final Cut Pro?

    how do I order vouchers for Certification Exams for Final Cut Pro?  This is for an Educational Institution.
    Thanks,
    Rufus Chaney

    I am at the district office of a school district.  One of our high schools is an Apple Authorized Training Center with a Certified Instructor.  The instructor is asking for vouchers for his students in order to complete he exams.  We would also like to like to make them available to oher schools within the district.

  • The document "2147483647-11-06 06_00_00.FinalCutCopy" could not be opened. Final Cut Pro cannot open files of this type.

    The document “2147483647-11-06 06_00_00.FinalCutCopy” could not be opened. Final Cut Pro cannot open files of this type.
    I was importing media, and closed out of the media before stoping the media import. This is how the file saved on the hard drive.
    I need to get this file into a format that FCP can open. Is there a way to export a .FinalCutCopy file into a .mov file???
    Any insights would be VERY HELPFUL!

    I was able to figure it out. I renamed the file type to a .mov format and quicktime was able to open it. Then I saved that file format on the desktop, and imported in after I opened FCP. The file then imported and I was able to access the whole video clip I had! Thanks for your help!

  • The document "-" could not be opened. Final Cut Pro cannot open files in the "package" format.

    Hello.    
    I have been trying to open a Final Cut Pro project but I keep getting this notification (title). The internet does not seem to have any solutions (maybe because of how simple it is).
    I have had in on an external hard drive for a while.
    I am using FCP 10.0.9
    Is there anything I can do?
    Thanks,
    Jimmy Fox

    It sounds like you're trying to open an FCP library. FCP files are never backwards compatible. The library structure was first created in version 10.1, so 10.0.9 will not open it. You'd need to find out which version created the library.

  • Viewer not playing video in Final Cut Pro!! HELP !!!!!!

    I am on final cut pro version 10.0, and when I imported a clip and put it into the timeline, as the video plays, the viewer has a black screen! I can hear the audio as the video plays but the viewer is not showing the video.
    PLEASE HELP!!!!

    Sounds like you haven't downloaded the codecs for that video. Try this.
    If you bought FCPX from Apple, you should update from the App Store. Otherwise, no reason to be running 3 year old software.
    Russ

  • How do I set duration on stills in final cut pro as I can in iMovie by just typing seconds?

    How can I set time (seconds) on stills (in final cut pro) as I can in iMovie, just by writing the time after having clickd on the still?

    The duration of the selection you make when you click on a clip in the event browser is set in the FCP preferences.

  • SD Card not showing up in Final Cut Pro on the MacBook Air

    I have been using Final Cut Pro X on a Macbook Air (1.7ghz Intel i5, 256gb ssd, 4gb RAM) and when I insert an SD Card, it shows up but immediately disappears. It continues to be displayed on my friends MacBook Pro, but does not on my Air. 

    Apologies! All sorted. My mac was just taking so long to render the audio lol
    Still having issues with syncing audio (zoom h4n) video clips (multicam clip or sync clips). Normally works like a dream even on difficult material, but for some reason now randomly sync's clips way off the mark.
    Cheers

  • I am not able to share final cut pro x project to iTunes.  it continues to say waiting.

    I have not been successful in sharing a final cut Pro X project to itunes.  It says waiting.   I can cancel it, of which I have canceled about ten submissions now, but each time it says waiting.  What am I doing wrong here?

    I am not running a compressor.   I am running the 30 trial version of Final Cut Pro X.  I have created and finished a project.
    I am running a brand new iMac with the latest OS version.    First I a highlight the project to share.  I assume just by clicking on it.   click share - apple devices - then i select for which machine, (imac) i want it to render it for-select add to itunes- and click share.
    Then it opens up the share monitor shows the project in question and says waiting.  I can pause it, cancel it but I can not get it past waiting.  the time registry under the info selection says 0.00 minutes but still waiting..
    I am selecting the project correctly?   I have made only one project.

  • Easy set Up for Cannon HV30 & Final Cut Pro

    What is the proper set up, for the Cannon HV30 and final Cut Pro 7. I typically shoot at 30P,
    since this is a Cannon Product I set the rate at 29.97, and firewire basic. Here is my confusion, do I select the 1080i60 setting or use 1080p30 setting since I set my camcorder to Progressive. I have seen the comment that the camcorder shoots the video in a 60i (interlaced wrapper) does this mean that I first set up my sequence as 1080i60, then send my footage to compressor to change it to progressive?

    There's Cannon Beach, Oregon.
    http://www.cannonbeach.org/
    And Canon camcorders and FCP.
    http://www.hv20.com/forumdisplay.php?18-Mac-Computers-Editing-and-Software

  • HT1338 Not able to update Final Cut Pro X to latest version.

    Macbook Pro 15" 2.6gHz, Retina display notebook:
    When I try to update Final Cut Pro X (version 10.0.1) from within the software, the dialogue returns that all software is up to date.  I know for a fact that FCP X is now at version 10.0.5.  Spotlight is enabled for all system and software.  How do I updage my FCP X??  Help.  Thank you.

    Thank you for your reply.  I followed your suggestion:  Checked once more in the App Store for the Update to Final Cut Pro 10.0.4 and did NOT find it.  So, I deleted FCP X version 10.0.0 to the trash bin.  I emptied the Trash Bin.  Now when I go to the App Store, the only option I can find is to purchase a new application.  There is no where to simply download the application in the App Store that I can find.   I hope I have not been led to delete my working application and can not retrieve an update!!
    What do you further suggest at this juncture?  Thank you.
    Message was edited by: Protiusmime

  • Mixdown not showing up in Final Cut Pro

    I really like Soundtrack Pro, but I am so frustrated. I have an 11 min sequence in FCP with 2 mono tracks and a stereo track. I sent to STP multi track, added some sound effects etc. and then Exported the Master Mix back to Final Cut Pro.
    When FCP opens, all the audio tracks are ghosted (grayed) and the clips in the audio are the same ones that are exported... rather than being 6 aiff files.
    Has anyone else had this problem? What could I be missing.

    A lot of people seem to have this problem for one reason or another.
    As an alternative, I suggest File>Export your Master Mix to an AIFF file that you can then import back into FCP.

Maybe you are looking for

  • How to replace ENTERPRISE Server Option by BB Internet Service Option?

    On my 8700 there is the ENTERPRISE Server option installed. As I want to vsend and receive emails from different email account without making use of the BB Enterprise geature I would like to get rid of the Enterprise-program installed and replace it

  • Video behaving badly on macs and windows7

    I have an interactive PDF I'm working on, which I've uploaded here http://dl.dropbox.com/u/5075782/Interactive%20PDF/Sample%20ebook%20new.pdf The mp4 video was made in Premier pro at a size of 1920x1080, (I wanted to use the built-in media player in

  • How to get app pages to go from last page back to first page

    on the s4 when you were flipping through the apps pages when you reached the end or last page the next page was the first page. now with the s5 it stops at the last page and you have to work your way back through all the pages to get back to the firs

  • Problem with a string method

    Hello, I am working on a program that converts Roman numerals to Arabic numbers and the opposite. I have the Arabic to Roman part down, yet Roman to Arabic part is causing troubles for me. I know that there are many solutions out there, yet I would l

  • Printing multiple images per page

    I'm sorry for this potentially stupid question, but how do I print multiple 4x6 images per 8.5x11 sheets - or in general, mulitple - defined size prints per page of whatever dimension. I have Aperture 1.1, iMac dual core, Epson 2200... I'll be back w