Motion Menu Goes Black When Button Is Added

Sorry for the double-post - I accidentally posted in the PP column first go round.
I'm creating a Blu-ray in Encore CS5.5. I built a short (1:30) video to loop as a motion background for the main menu. I import the video and audio as assets, and attach them to the menu (they're encoded as Blu-ray H.264s, but I've also tried a Pro-Res 422 master file).. When I preview the menu at this point, both the video and audio play fine. The minute I add a button however, the video goes black (audio still plays fine, and button is visible). Ultimately, I'm trying to create an original button (not a generic one included), but it happens with either button.
Note - the menu video fades out to black, and in from black, so the first frame/loop point is black. When I reset the loop point to somewhere in the middle, whatever frame it lands on becomes a STILL IMAGE in the background while the menu plays. The music still plays fine and the button is still visible. Also an FYI: The highlight layer is not a full-frame graphic - just a line to "underline" the word "Play" when the button is selected.
I've searched all over the internet and while it appears to be a common problem - I haven't found a solution that's worked yet. Here's what I've tried so far:
Thrown up a generic button (included with Enc).
Dynamically linked menu to PS.
Deleted generic button "group" and created new button group.
Deleted *locked* background layer & created new, unlocked background layer.
Opened After Effects and minimized it in bg.
Emptied cache in Encore.
Reset loop point to :10:00, then reset it back to 00:00.
Cold-booted entire computer.
Used a Encore library menu & attached the assets to that background.
Anybody have ANY ideas???
Thanks!
Tim Walton

Hi All -
Ran through all the steps again, and this time it worked!
Tim

Similar Messages

Screen goes black when coming out of screen saver. HP Pavilion,p7-1414 desktop, windows 8

the monitor shows the windows 8 screen with the apps, then the screen saver will come on. Then when I try to bring it out of the screen saver mode the screen goes black and nothing I do will get it to go back to the windows 8 screen. Then the mouse pointer will disappear. So I end up having to shut down the computer using the power button. If I have the screen set up for the old style windows 7 and it goes into the screen saver and I bring it back there's no problem.
fleamarketlady

Hello fleamarketlady,
Your computer goes black when it comes out of sleep mode some times.
Make sure that you are only using one cable to connect the monitor to the computer.
Open up command prompt and run the following command SFC /scannow.
This will scan the system files and correct any errors that it can.
Here is a link to command prompt.
When you go to open command prompt, right click and run as administrator.
If you are still having the problem you can perform a system refresh.
This will uninstall windows 8 and reinstall it without affecting your personal information.
Here is a link that will walk you through the steps for a refresh.
Let me know how everything goes.
Have a good day.

My iPod touch goes black when I try to face time. Can anyone help with a fix.x

My iPod touch goes black when I try to use FaceTime. Can anyone help.x

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>FaceTime and sign out and then sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

Have a 3 yr old iMac the screen goes black when using it it will come back on when you move the mouse thanks for your help Dave

It's possible you've got a 'hot corner' set up. If you have and move the mouse to a certain corner of the screen it'll do as you describe. Have a look in System Preferences>Mission Control, bottom left of the window click on the 'Hot Corners' button and see if there is anything in there.

N95 screen goes black when in between open and clo...

Just noticed today that the screen goes black when sliding open or closed. Screen comes back on when slider reaches open or closed. Is this like the blank screen fault that affected so many N80s ? I'm very disgusted that I have to pay to fix my 16month old (expensive) N95 for an ongoing issue with Nokia sliders that they HAVE NOT fixed in their design. Very poor support Nokia.
Nokia 808
Nokia CK-200

Scott your grieviences are justified... but there is always a solution to a problem...even if this is a strange problem to be handled in an off the routine way, be it so... once again best of luck! not blame nokia for anything...nokia rules as always and nokia's productions have become very slow now :-( i wish they could make trendy phones like sony, sleek and stylish with new features.in some ways, nokia gets a little boring with no new features.. i dont feel any differnce between the nokia n95 8gb, n96 and n85(which i currently own)!
Scott lets hope for the best :-)
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

I'm using CS6 created a new document. trying to use my layers and my work keeps going black. when I

I'm using Photoshop CS6, created a new document. trying to use my layers and my work keeps going black. when I click on the workspace i am able to see my work but when I move my mouse any little bit it goes black again.

Good day!
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Regards,
Pfaffenbichler

Macbook Pro 15" 2010 display goes black when opening PPT

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

My Macbook Pro 15" 2010 main and secondary display goes black when opening some PPT documents when connected to an external monitor. Has anyone else experienced this issue and if so, what was the solution?
What I have:
2010 Macbook Pro with Snow Leopard (all latest updates)
Office 2011 - with all latest updates
Acer 24" monitor (all attached monitors go black)
Thanks for the help in advance and let me know if I can provide any additional information.

IPhoto going black when using the contract tool

my picture goes black when im trying to edit using the contrast tool!
what the heck.. any advise?

Do the other tools work correctly in the edit mode? Try the following: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. If that doesn't help launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Display goes black when in a call

I have noticed an annoying feature with my Nokia N8: The display goes black when in a call (holding the phone to my ear). When the call is finished I have a difficulty to close the call. Is this a Nokia special feature for saving battery that can be turned off or is it an error?
Solved!
Go to Solution.

Hey Is1987Is! Sorry you are having this problem.
It is normal behaviour for your screen to go black when held near your ear.
Is your screen just not coming back on once you finish your call or take it away from your ear?
Incase it is a bit more of a serious case of your phone having a black screen after hanging up a call. You can try this troubleshoot.
To make sure your proximity sensor is not over sensitive causing your phone to have a black screen, during incoming and outgoing calls aswell as alarms.
First thing is try to verify sunlight/IR oversensitivity with a typical desk lamp.
This could be done by making a phone call (or setting alarm) and putting the phone under the desk lamp when the phone is ringing (or alarm activated).
If phone is oversensitive to IR, display should go blank caused by IR radiation from desk lamp.
If this is the case you should take your phone to your Local Nokia Care Point, and they will be able to fix it for you!
I hope this helps, let me know if your phone goes black screen during an incoming calls when you test it under the lamp!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

In CC, screen going black when adding text or cropping

In creative cloud, when I am adding text or cropping a pic, the screen is going black and the picture cannot be seen. I have to go away from that layer for the pic to return to being seen. Any suggestions?

Hi dsharr,
Please confirm which software you are using so that we can answere your query accordingly.
Regards,
Jatin Dembla

Satellite L405D-11V - Freezes and screen goes black when watching video

Ok, so I have the Toshiba Satellite L405D-11V, I have had a fault, basically, the computer would freeze at any time and the screen would go black, with the fan and lights still going, this could be on start-up, or a few hours into using the laptop, so I decided to ring up Toshiba's tech support and they arranged for my laptop to be collected and sent off for repairs.
I was able to track the repairs online through the tracking service, and was able to see what they were doing to my laptop, it said that they ordered a part, it was in progress and the repairs were finished.
However, I got the laptop back today, I turn it on, everything is fine, I start using the laptop everything is fine, then I decide to watch a video on youtube, and it freezes again, so, I power off holding down the power button, hoping it was just a one off, I turn it back on, and load up the video again, it freezes and the screen goes black again, after working out that when ever I watch a video or play a game, it causes the computer to crash and freeze like before the repairs. So there is still a fault, but im not sure what to do
Its still under warranty, I purchased the laptop from Comet, but I dont really want to send the laptop off for repairs again and to find it will come back with the same fault, is it worth sending it off again, perhaps seeing if comet will replace the laptop as its still under a year of buying the laptop, or is it just gonna be worth saving all the hassle and buying a new laptop? If this fault has happened to anyone else, I could sure use some help, and if someone could shed a little light as to what might be wrong?
Thanks

Hi buddy,
Did you change something on configuration after you got your notebook back from repair? Did you update a driver or something else?
What operating system you are using on your Satellite L405D?
To be honest its really hard to say why it happens because the technicians test everything to check if your notebook runs properly.
In my opinion you should try updating the display driver. Maybe its causing the issue
If not I would recommend installing Windows from Toshiba recovery disk to restore factory settings. These settings are pretested by Toshiba and should work.
If you still have the problem you must contact the technicians again. I mean you could track the repair online and according your posting everything worked well during repair so in my opinion it shouldnt be a problem to contact the guys exactly.
Explain your problem very detailed. I think everything can be clarified then. :)

Screen goes black when making phone calls

Hi, I have started to use a new Xperia Z2 a short while ago. As soon as I am tapping the screen to call a phone number the screen goes black; I can hear the phone calling but can't see anything (not being able to turn on loudspeaker etc.). The sound works, and screen can be brought back to life when the call is finished. Same thing when I call with my Skype app - really annoying as the video mode in Skype doesn't function. When the call is finished from the other side, I can get the screen to light up again. What can I do to solve ths problem?

Hi.
I've got very simillar problem with Xperia Z2 screen.
Not always, but very often when I want to end the conversation and take the phone away from my head, screen remains black.
Only power button can help, when I click it, screen pops up and then I can click "END CONVERSATION"
It's really annoying. What can I do, to make it work ?
Answers for your further questions.
- I don't have any protection on the screen
- I don't have any case or anything
Android 4.4.2
Compilation number: 17.1.1.A.0.402
Thanks

My iPhoto goes black when I try to open a photo

I am running OS 10.7.5 and iPhoto 11 9.4.3 on an iMac. Yesterday I uploaded 620 photos into iPhoto. They worked perfectly and I was able to go through all of them after uploading. I did not close iPhoto last night but minimized it to the dock. Today when I tried to open a photo from the thumbnail, the screen went black. All my albums do the same thing. The first image clicked on comes up on the screen. Then it goes black and then nothing I do will bring up another image.
I restarted iPhoto but that did not help.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

IPad screen locks itself and goes black when nudged? very frustrating

Hi, my IPad is driving me nuts! Can anyone help please?
I can be in the middle of anything ( games, apps, typing, banking, etc. etc.) and with the slightest movement or nudge - the screen locks itself and goes black??
I then have to press the home button, slide to unlock it - and it opens back up to exactly where I was.
This happens constantly, and is so frustrating!

Is there a case or screen protector that is possibly interfering with the proximity sensor (detects if the phone is near your face, allows the keypad/screen to be visible when the phone is away from your face)

Photo goes black when editing it

Hi,
I acknowledge this is a fairly common matter, but let me try to share my on experience.
For the past few days, I have been importing photos in my iPhoto library either from .jpg docs or brand new ones from my digital camera.
Each time I try to edit one of those, the image goes black. Surprisingly, if I try to crop a picture, the image comes back to view !?
I have unsuccessfully tried to:
- repair iPhoto library permissions
- reconstruct library
using the Cmd+alt keys when lauching iPhoto.
I have NEVER experienced such a painful behaviour in the past, as I have to go back and forth between the editing and normal modes to see the results of my editing.
Any educated advice would be appreciated.
Mac mini Core 2 Duo - 2 Go RAM - OS X 10.7.5 - iPhoto 9.4.1

The fact that you can edit those photos and get them to display correctly via a new, modified file indicates that the originals are damaged somehow.
Select one of the thumbnails and use the File ➙ Reveal in Finder ➙ Original menu option to take you to the original file located inside the library. Copy the file to the desktop and try the following:
1 - download Convert to JPG and Embed sRGB profile from Toad's Cellar and unzip it.
2 - drag the file from the desktop onto the application.
3 - import the converted files into iPhoto and see if it appears as it should.
If the above works you could run it on each file in the library. Unfortunately you would have to open each subfolder in the Masters folder and drag the files onto the application. That will be a lot of manual work.

Motion Menu Goes Black When Button Is Added

Similar Messages

Maybe you are looking for