Motion Menus back ground and the overlay
People, I have a motion BG in a menu... it run smooth, the problem is that I set the overlay for the buttons but it show the selected state ( the overlay) before the video is done so the DVD viewer can see whats coming.
I put the default button to "not set" already but still show the overlay from the begining of the video (motion).
Please any help.....
Thanx so much
What code do you already have for changing the color and the number of elements? Whatever it is you need to somehow tie that to being able to control it with a slider. Would this be one slider to control both properties, or a different slider dedicated to each?
Similar Messages
-
I have an image that I removed from its back ground and I would like to scale the bottom portion of the image because its to wide but not have that effect the top portion of the image which is the correct width. but also keep the aspect ratio correct, keep it looking as natural as possible (its a piece of jewlery) ? how can I begin to do this.
The area circled in red is to wide (the width) the necklace's width is as wide as the models entire chest. And also the length of the necklace it's to long it should come down to the clevage area on the model/woman.
-
I need to run the program in back ground and then update two fields
hi gurus
i need to run the program in back ground and then update two fields in the z table by mm02 transaction by using bapis , can any one give me the code for this.
Message was edited by:
Rockyhi
good
go through this link
http://www.sapdb.org/7.4/htmhelp/34/ee7fba293911d3a97d00a0c9449261/content.htm
thanks
mrutyun^ -
I lost power to my MacBook Pro before I had saved anything that I was working on...usually I plug my computer it and power it back on and the documents pop right back up when the computer turns on. That did not happen this time. How can I recover my documents?
If you never saved, auto save does not kick in.
Peter -
In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?
If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is '''Fx''' -
My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.
Hello Toby135
Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
-Norm G. -
My britness on my iphone 5 was on 100 % and I turn my screen off and after 10min i turn it back on and the screen was on 0% while the britness line on settings was on 100% is it an IOS 6 bug or is my iphone broking???
I've seen that happen sometimes. For me, pressing the lock button to lock it, and then pressing the home button to get to the lock screen reverts it back. If that doesn't work, just move your brightness slider lower and then higher again.
-
My iPhone 4 just went black all of the sudden. I can't get it to turn back on and the battery wasn't dead. Anyone know what causes this and how to get it back on?
This has happend to my ipod once...
did u keep it somewhere so tightly pressed??
that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!... -
When I try to turn on my iPad, it states that it needs to be backed up to i Cloud. It is already backed up and the message is still there. What do I do next?
If you are getting a message that it hasn't been backed up for a certain time period, and you exit the alert and access your iPad, reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.
-
My iPhone with 40 or so percent randomly shuts down with iOS 7 and 6. Often with the camera app stating the phone is out of battery. Moments later I turn it back on and the same battery life still appears. It sometimes happens over and over until I leave it alone for a while (still not charging), and then it works.
I think you might get a new phone instead of repairing it as it takes time and you said the repairing center is far from your living place
-
My phone was charging and then it wouldnt turn back on and the lock button is jammed so i cant really do anything. Please help me, i havent had it for very long.
i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.
-
Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?
Sounds a bit like the Power Supply, but...
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939 -
Can apple determine the location of my stolen iphone when it was powered back on and the remote data erase was initiated?
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5 -
On a web form, I used to be able to enter info. Then when I got the info I needed, I was able to Back Page and the cursor would "remember" where I left it last.
Now, when I Back Page, the cursor goes to the beginning of the form which means that I must replace the cursor at the proper place and enter in new info.
Using FF 4.0 with Vista 64 on my Desk Top.This is probably due to a problem with an add-on. For details of how to troubleshoot that see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
The AVG Safe Search add-on has caused this problem for some. -
Just had my mac mini's superdrive replaced by Apple, I have it back now and the top get so hot you cant touch it, I installed fancontrol and it climbs to 100 C but dont think the fan is running as it says 000rpm?
Have you spoken to whoever replaced the superdrive? Why not take it back there?
Maybe you are looking for
-
Error while generating Web Service from a function module.
Hi Experts, I am trying to create a web service from function module by doing the steps as mentioned in the below document: http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID1146834250DB10778842957931285337End?rid=/library/uuid/80fa3dff-
-
I dont have F11 on my HP 2000 notebook laptop how do i reset to factory settings on here plz help
-
ITunes not playing/connecting through Airport Express
Whenever I try to play a track in iTunes wirelessly through my Airport express iTunes always returns the error: "An error occured while connecting to the remote speaker "AirPort Express" The network connection failed". I can't work out what's wrong b
-
The program Ive been given to 'enhance' uses a logical database. I tried to argue that a 40 min response time was reasonable but they are not buying it. (we have to try right?) Nearly 98% of the time used by this program is in database access. I foll
-
Hi Experts My Questions 1.Why DB sender adapter have sql statement and update statement as a mandatory . 2.for example if i want to pickup 3 Fields from table. that field names and data type names should be equal or not. Ex: Select eno,ename ,sal fro