Motion menus not working after Leopard

I see that other people are having problems with motion menu templates after installing Leopard. I tried trashing my prefs and that didn't work. Has anyone else found a solution to the issue. Thanks!

What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

Similar Messages

Remote not working after Leopard update

I've read about, and have the problems reported with Front Row when it comes to viewing content on another (TV) screen, but does anyone share my problem about the remote control not working at all?
This morning before I upgraded to Leopard it worked fine, but since then, no matter which button I press, nothing happens at all.
I've to launch Front Row manually, either by launching the new app, or the CMD Esc command, but the 'Menu' button on the remote doesn't do anything.
It certainly isn't an issue with the remote as my iPod still responds to the commands when it is sat in the iPod Dock that has the remote receiver on it.

To provide closure on this thread, I now have it working!
Got all the ideas from the iSight thread listed above, here's what I did.
Firstly, shut down the computer, disconnected everything from the back of it, gave it a dust around the back of the iMac, blew out the cobwebs so to speak.
Left it ten minutes, made myself a drink.
Returned and restarted the computer, but applying the reset PRAM command, which is after switching on immediately hold down the Command, Option, P and R keys.
You'll hear a second chime, release the keyboard and the computer will boot up.
Once everything had loaded, I launched iSight and lo and behold, there was my ugly mug staring back at me, iSight was once again working.
I then proceeded to the System Preferences to see if I could get the remote working. There was the IR instructions at last including details on how to pair the remote.
Pointing my remote to the screen I held down the Menu and Next/FFWD button until a chain and the remote symbol appeared on the screen.
With my remote paired with my iMac, everything was finally working again after two days of installing Leopard, Tiger and the Leopard again!
Now Apple, how about sorting out Front Row working properly when pictures are DV'd out to a TV!??

DNS does not work after Leopard utdate

Hello!
We are using an G5 XServe. Until recently we used 10.3.9.
With this configuration everything worked, but when we updated from 10.3.9 to 10.5.1 the troubles began.
All the DNS info from server admin is gone. And the network does not work as it did before.
I can still see the info in the files via terminal, but it is not present in server admin.
We cloned the server disk to an external drive before updating. When we start from this disk everything works great.
I have been searching the net for a while and found this article:
http://www.afp548.com/article.php?story=20071031195155456&query=Leopard%2BDNS
It mentions a bug causing DNS to crash badly if service is updated and saved. I updated the service when I updated to 10.5, and I saved it afterwards...
Does anyone have any tips? Im really need to get this up and running!
I suppose I could clone the server back from the backup, update to 10.5 and NOT upgrade the DNS service. However I hope there is another solution..
Any help would be greatly appreciated!
Thanks
Message was edited by: wiitho

In a few hour its back to work..
I have not found any absolute answer to my problem.
I thing Ill try the "clone back and dont update DNS service" option. However, there is one concern:
Will it help to not update the DNS service? Or will I be facing the same problem again after updating to 10.5? If anybody knows I would appreciate any answer
Thanks!

Dvd player does not work after Leopard upgrade

I installed Leopard, had to upgrade because my printer died and no printers now work with Tiger. Since the upgrade, my DVD player does not work. I have problems burning some cd's too. Is this a known issue? What is the fix?

I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

ISight not working after Leopard installation - 1st Generation MacBook

My iSight is no longer working on my 1G MacBook after Leopard clean installation. Does anyone have this problem?

What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

ISight Camera not working after Leopard install

On my 1st gen Intel 20" iMac, after the Leopard upgrade -- which went very smoothly -- my iSight camera no longer works. I have tried it in Photo Booth and iChat Video and it is the same in each, so it is the camera, apparently, not the application using it.
In the self-viewing screen on my iMac, I see myself for just a second or so, then I fade out quickly and there is nothing to see but black. If I shine a desk lamp in my face, then I can just barely see the outline of my image but the picture is mostly black. It seems like an exposure problem: the camera seems to adjust, shutting down as though I am very brightly lit but since I am not, it produces only a black picture.
I also have a 1st gen Intel white MacBook that I have also upgraded to Leopard. The iSight camera seems to work just fine on that computer. I tried out the video in Photo Booth and it worked great.
Any ideas?

Hi,
I too am having the same problem, and I'm using the old school iSight camera and immediately after installing Leopard, it won't work. I can't even power up the camera. It will power up for about 3 seconds then power down as fast as the little green light came on. It was fine about an hour before the 10.5 install. I powered down and unplugged everything for about 10 mins. then plugged it all back in, and still not working. So I am back to the drawing board trying to sort this out. If anyone has anymore thoughts on this, pls. chime in. All the suggestions seem to work for you folks after a little tweak. I even booted into OF mode and reset-nvram and reset-all for kicks to give it an even fresher start.
thanks!

Encore cs5 motion menus not working when build to flash

Hello my question is this, I have created a dvd in encore cs5. I have created motion menus in AE.
Everything works great when I build to DVD. However when I export to flash my animated menu is working but the buttons (play move, chapter select , extras) do not show up until the animation is complete. Is this a simple fix? or should I make the menus static?

Hmm... what version of the Flash Player are you testing with
(full version, including release number)? You can find out which
version you're using here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507
-Robert

Canon LBP5000 does not work after Leopard Upgrade

Hi all,
We have a Canon LBP5000 that is directly connected to one of our iMac's and worked like a charm when we were using Tiger. After upgrading to Leopard, everything went weird. It is still installed but when we tried printing, we get a 'Load Paper' warning from the printer. After checking to make sure that the default paper was all in A4 format it still wouldn't print. We then tried hooking it up to an Airport Express to share and while trying to add it via Bonjour, an Error 9672. We're seriously looking at getting a new clour laser printer that works with Leopard as at this point in time, there is yet to be found a driver from Canon that works with Leopard. Any suggestions of colour laser printers that work with Leopard or solutions to our problems ?

Hi Donny/PJB,
I did look and googled the drivers but the European site has outdated ones. We were actually using Japanese drivers CAPT (Ver. 1.60) for Tiger but it doesn't work now for Leopard. PJB, thanks for pointing out your post and I had a run through the Japanese site but it's all in Japanese
Anyway, I basically used common sense and updated the CAPT to (Ver. 1.61) but it still doesn't work after installing it. Every time I try to print or so a test print, the progress went Printing to Stopped.
When we click Resume it doesn't do anything and after 4 clicks, there was a short 'Fatal: Failed to load module' message pops up in the Print Queue dialog box. Has anyone actually have a Canon LBP 5000 printer that has worked with Leopard ? That is my question really...sigh.

Canon MP 600 Printer not working after Leopard Install

I installed the Leopard OS and now my Canon MP 600 printer that purchased at the MAC store with my Mac in Aug of this year. It was working properly prior to the Leopard install. I tried re-installing the printer drivers, but no change. I can see my MP 600 as the only printer available. I am also unable to even print a 'test' page. When I run the Network Diagnostics everything is fine, but no printing.
Any suggestions?

I tried this. I also tried updating the CUPS config file as was noted elsewhere. The printer is a total no-show on Leopard.
It is being served by an older G4 whose only job is to serve the printer.
On Tiger it would just *be there* to print to. All the Panther computers see it as a "shared printer" in the printer box.
In Leopard.... not a &^^&% thing.
Not happy.
deviztate wrote:
Are you using a gimp driver? I had the same issue and gimp was the cause. I went to the Canon website and found the driver I needed. After the install and restart all was well. In fact, when I opened Print Utility, I saw that the system had already defaulted to the new Canon driver. Here's the Canon link...
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=182&mo delid=12892
Navigate to drivers and downloads... Hope this helps...
-d

Photo Booth not working after Leopard install

I have a mac mini and a ViewSonic VX2235wmb (LCD with a usb web cam built in). Before installing Leopard, the web cam worked with iChat and Photo Booth, without the need for any additional drivers. After installing Leopard, iChat works, but not Photo Booth. Here's what I get when I open the app:
http://www.davidsilva.net/photobooth.png
I've tried the 3rd party driver apps, but I get the same results. Any suggestions?

I have the exact same problem with the ViewSonic VX2255wmb (LCD with a usb web cam built in).
On Leopard it works fine with iChat, but does the same squiggly mess as your snapshot when run with Photo Booth.

Disc menus not working after upgrade to Maverick

Dear all,
I can't use disc menus in Premiere Elements 10 after upgrade to OS X Maverick on my IMAC.
If I select a Disc Menu the pragram always crash.
There is a message: Adobe Premiere Elements will be closed because an Error happened. The current project will be saved.
How can I fix this issue.

uada1061
What is happening...
a. You click on the Disc Menus header and the program crashes
or
b. You select a theme in the Disc Menus display and the program crashes if you click Apply or drag the menu from the display area into the Disc Menus Screen?
Have you check your Maverick permissions including making sure that the User Account being used has Administrative Privileges?
How many disc menu makers are on the Timeline, and what is the spacing between them? Are there any disc menus that you can work with without an immediate program crash when you select one?
More later. Looking forward to your follow up.
Thanks.
ATR

Sudden Motion Sensor not working after upgrade to WD5000BEKT HDD

Hi everyone, I just upgraded the hard drive on my Macbook Pro (2010) and I am very pleased with the performance of this 7200rpm drive, I have seen reads around 105MB/s and a pretty good boot time at 23s. But I used to be able to hear the hard drive stop when I moved the computer around before due to the Sudden Motion Sensor technology and since I have the new hard drive in it doesn't seem to work anymore. I have tried switching SMS off and on and it didn't change anything, also the drive is a Western Digital Scorpio Black without Free Fall sensor (I took that version on purpose so it wouldn't conflict with the SMS). Do you have any ideas on how to make it work again? Because I really like this feature on my Mac (I have dropped a laptop before so just in case it happens again). Thanks a lot for your help.
Scott

For future reference, here are a couple of kb articles on the sudden motion sensor:
http://support.apple.com/kb/HT1935
http://support.apple.com/kb/HT1934
As has been said, Apple's Sudden Motion Sensor is not actually built into the hard drive. In fact, some hard drives with their own version of a sudden motion sensor like Seagate's G-Force Protection actually will set up a conflict with Apple's Sudden Motion Sensor.
I installed the same WD in my Mac as you did, and I hope you enjoy it as much as I have been enjoying mine.

IMac LCD not working after Leopard install

So I have a family pack and installed leopard on three computers so far and they all took forever, so I went to install on my iMac G4 1.25, 1 gig RAM, and I got the install started and when I returned the screen was black. I restarted and nothing. I finally got the computer hooked up to a plasma I have at my house and sure enough the install went just fine. Long story short, my comp is just fine, the LCD just doesn't show anything. The vid card is fine if it shows up on an external monitor, the LCD is connected and functioning because I can adjust the brightness and that still works, just no video
I called AppleCare and was on the phone for, no joke, 1:37:39, WOW, took forever, the guy ended up telling me that it is out of warranty and I need to pay to have it fixed. Anyone have any ideas or what to do?

Anyone have this similar problem? or know what I need to do?

IChat not working after leopard install

I installed leopard yesterday and have found yet another problem. Has anyone experienced the following?
I can open iChat. I can view the contact window and check visuals/microphones etc
However i cant:
Add/Delete contacts - and there are no contacts availible so i can talk to anyone
Access toolbar - On every menu in the tool bar every option is faded - such as buddies/format - so i cant select anything from there
I can effectivly sit and stare at myself. Which is only fun for like the first 5 mins.

Hi,
I am going to ask you to recall as clearly as possible what you did at these steps
http://www.siriusaddict.com/ichat.html
These are the Start up Screens.
They tend to presume you are going to set up a AIM or @mac name before setting up a Jabber one.
Did you set up an AIM or @mac name first ?
Did you click through those screens and then do it in iChat > Preferences ?
Please detail as much as you can remember.
In the iChat menu > Accounts is the Jabber account/screen name Logged in ?
In the Address Book doe your My Card now have the Jabber Screen name added to the info ?
9:47 PM Thursday; December 6, 2007

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Motion menus not working after Leopard

Similar Messages

Maybe you are looking for