Motion/opacity (still) not working when using Time Remapping

Okay: here's my beef. This bug has been around since CS3 and definitely CS4. I was hoping it would be fixed with the arrival of CS5, but apparently it still has not been resolved.
If you use Time Remapping in PPro, you can't use any of the other keyframing features, such as motion or opacity. If you do, the video simply disappears. Rendering won't help either. The only way to get Opacity to function is to superimpose a bar of black video on top of the clip (or any other color matte if you like it fancy) and have the Opacity on that clip work in reverse. How to get motion within such Time Remapped clips to work is still a bit of a mystery to me...
Has anyone else found this tedious/annoying/irritating?
So, dear Adobe, when can we expect a fix for this? Hopefully before CS6...
Thanks much.
Richard

I have this same exact problem in CS6.
It definitely has to do with time remapping. I have used Opacity keyframes EXTENSIVELY in this film I'm editing, and suddenly when I apply time remapping keyframes, I can't use opacity on them. Ouch!
My solution was (In case someone Googles for a solution and finds this, like I did...) to delete all effects and time remapping, apply the Opacity Keyframes FIRST and THEN add the time remapping last.
Hope this helps.
Message was edited by: aikembisd
Added my work around.

Similar Messages

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

Siri does not work when used for calling a contact function

Siri does not work when used for calling a contact function

Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it.

HT204168 touch screen function not working when using facetime

Why is my iPad touch screen function not working when using FaceTime?

Hi megascones,
I apologize, I'm a bit unclear on the exact nature or scope of the issue you are describing. If you are having issues with the touch screen on your iPad, you may find the troubleshooting steps outlined in the following article helpful:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Regards,
- Brenden

Why is my touch screen function not working when using facetime

Why is my touch screen function not working when using facetime

Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Lenovo S8-50LC Wlan(WiFi) Does not work when use Sim Cart(3G)

Hi
Tablet Lenovo S8-50LC
Wlan(WiFi) Does not work when use Sim Cart(3G).
What is the solution for this problem?
Build Number : TABS8-50LC_S000200_150121_ROW
SoftWarw Version : TABS8-50LC_150121

Right, but if you have the SIM in the tablet and you put the tablet in airplane mode, does wifi work then? If so, it may be a bad SIM. Do you have another SIM you can try?

Why does diadem intellisense not work when using scriptinclude or for global object

I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.

Here is more information on the issue.
I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.
'Test.vbs
class test
    public function test1()
         msgbox("test1")
    end function
    public function test2()
         msgbox("test2")
    end function
end class
'now create a object of the class
dim oTest
set oTest=new Test
'now when you type oTest. you get the following functions to choose from
oTest.test1
        .test2
Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
'Main.vbs
Option Explicit 'Forces the explicit declaration of all the variables in a script.
call scriptinclude("c:\1atmp\Test.vbs")
dim oTest
set oTest=new test
'now when you type oTest. it shows none of the functions in the object oTest
oTest.

Microphone not working when using a phone call, Microphone not working when using a phone call

Microphone is not working when i use my iphone 4, first day when i installed a iOS 7 , was all good, second day this happened. Please help me. When i use a Viber microphone working. I think this is not a hardwear problem.

Hi Mike
That was very helpful thank you.
I did as you suggested and found the "switch" was already turned on green. I swiched it off waited a while then turned it back on and microphone was back in use in viber. I have a sneaky feeling I may have to do this again in the future. I am not aware that I did anything that led to the microphone going off, but having said that I have only had the phone for a few days so may have done something when checking it out.
The phone has been a lot of fun after replacing my ancient Nokia with it. That Nokia worked in Morse code!
Best wishes
Rob

Keyboard backlighting not working when using Windows in Boot Camp

Hi, I'm posting this for a friend with a new Macbook Air. He says that his keyboard backlighting does not work when he is using it for Windows (don't know which, but probably Vista). Any ideas why? Thanks. Gary

Install all the drivers needed when running boot camp - try for example inserting a DVD - then press the eject key - See if it comes out - If it doesn't install all the drivers - try Control Panel - If not try re-installing your version of Windows.

Elements 11 - Brush tool not working when using layer mask

My brush tool won't work when using layer mask in PS Elements 11. I also have Elements version 10 installed and there it works fine. If I do the exact same proces in version 11 nothing happens.
Is this a bug or has something changed in the proces?
Please help.
Thanks.

Make sure you have the mask thumbnail selected - it will be highlighted in blue.

Enter Key Not Working When Using Text Tool

For some reason, my enter key has stopped working when using the text tool. Instead of making a soft return to a new line, it simply commits the type. What is going on here?
I'm using a desktop and CS3.

there are 2 enter keys in key board
if u enter main key board enter, sentence will go to next line
In case u enter the key available in rightside of the key board , in the cluster of numericals, the type tool is committed.

My Camera still not working when i restore twice

my camera still not working, i had already restore it twice but it's not work. Both of camera are not working. What can i do now??

Restore as new, do not restore the backup.
If the issue still exists, take the device to Apple.

Adobe air mobile - softKeyboardType is not working when using skinClass to allow scrolling?

I am trying to set the softKeyboardType to email but when ever i use skinClass="spark.skins.mobile.TextAreaSkin" it doesn't change it but when i take off skinClass="spark.skins.mobile.TextAreaSkin" it does work. The problem is i need the skinClass="spark.skins.mobile.TextAreaSkin" class to allow my application so scroll with out it the text does not stay with in the bounds of the text input boxes. Has anyone seen this problem or another fix the the scrolling problem?
Code examples
<s:TextInput softKeyboardType="email" id="id1" width="100%" skinClass="spark.skins.mobile.TextInputSkin" />
<s:TextArea softKeyboardType="email" id="id2" height="400" width="100%" skinClass="spark.skins.mobile.TextAreaSkin" />
Thank for the help,
Justin

The main problem we are all seeing is that its not hooking into the scroller, as this is documented not to work in a scrollable environment
However try something like this, still not perfect (as i see a flicker) but it should get you going.
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    applicationDPI="320"
    xmlns:local="*"
          applicationComplete="init()">
<fx:Script>
                    <![CDATA[
                              import mx.events.PropertyChangeEvent;
                              import spark.skins.mobile.StageTextInputSkin;
                              import spark.skins.mobile.TextInputSkin;
                              protected function init():void {
                                        addHandlers(myScroller, myTI);
                              protected function setStageTextInputSkin(ti:TextInput):void {
//FIXME could do with a check to ensure that the skin isn't being set many times when it doesn't need to
                                        var myTIText:String = ti.text;
                                        ti.setStyle("skinClass",Class(StageTextInputSkin));
                                        ti.returnKeyLabel = ReturnKeyLabel.DONE;
                                        ti.autoCapitalize = "sentence";
                                        ti.softKeyboardType = SoftKeyboardType.NUMBER;
                                        ti.text = myTIText;
                              protected function setTextInputSkin(ti:TextInput):void {
//FIXME could do with a check to ensure that the skin isn't being set many times when it doesn't need to
                                        ti.setStyle("skinClass",Class(TextInputSkin));
                              protected function addHandlers(scroller:Scroller, ti:TextInput):void {
// ====================== ADD LISTENERS FOR WHEN WE NEED THE STAGETEXTINPUT ===========================================
                                        ti.addEventListener(FocusEvent.FOCUS_IN, function(event:FocusEvent=null):void { setStageTextInputSkin(ti) });
// ====================== ADD LISTENERS FOR WHEN WE NEED THE TEXTINPUT ===========================================
                                        addEventListener(SoftKeyboardEvent.SOFT_KEYBOARD_DEACTIVATE, function(event:SoftKeyboardEvent=null):void { setTextInputSkin(ti) });
                                        ti.addEventListener(FocusEvent.FOCUS_OUT, function(event:FocusEvent=null):void { setTextInputSkin(ti) });
//http://stackoverflow.com/questions/4390725/flex-4-scroller/4425091#4425091
                                        scroller.viewport.addEventListener(PropertyChangeEvent.PROPERTY_CHANG E, function(e:PropertyChangeEvent):void {
                                                  if (e.source == e.target && e.property == "verticalScrollPosition")
                                                            setTextInputSkin(ti);
                                                  if (e.source == e.target && e.property == "horizontalScrollPosition")
                                                            setTextInputSkin(ti);
                    ]]>
</fx:Script>
    <s:Scroller width="100%"
        height="100%"
        verticalScrollPolicy="on"
                    id="myScroller">
        <s:Group width="100%"
            height="100%">
<s:layout>
<s:VerticalLayout/>
</s:layout>
            <s:TextInput id="myTI" text="hello"
                softKeyboardType="number"
                                        skinClass="spark.skins.mobile.TextInputSkin"/>
        </s:Group>
    </s:Scroller>
</s:Application>

Function module PTRA_WEB_EXPENSE_REPORT_GET_2 not working when used in loop

Hi All,
I have used a function module PTRA_WEB_EXPENSE_REPORT_GET_2 in a custom fumction module which i am developing fetch the travel expense data . The function module PTRA_WEB_EXPENSE_REPORT_GET_2 returns the travel expense data based on the employee and the trip number. I want to fetch the travel expense data for a given set of employees and trip number and hence i have used this function module inside a loop statement.
The function module returns the travel expense data for the employee and trip in the first loop pass. From the second loop passs it doesn't return the value. I have also checked this in se37 and the same thing happens. Value is returned for the fist employee but for the next employee we have to go to initial screen of se37 and execute the Func. module again.
I debugged this function module and found that the value of the employee and the trip number is stored in the global variable. The value passed for the employee and trip is compared with the correspomding value in the global variable and if they are not same an error message is returned. Since we are using in a loop , each time a different value is passed for the employee and trip and the check fails .
Is there any way to clear the value in the global parameters or is there any other function module which can be used to clear the values of the global variables?
Thanks!
Regards
Manipal Parkala

Hello Archana,
May be we can try several ways...
1) can you try calling function module BUFFER_REFRESH_ALL ??
after each call...
2) May be u can call Function module "PTRA_WEB_EXPENSE_REPORT_GET_2 " in background task or seperate task , it will load the function group everytime when u call it in loop.
***DO let us know if it does not work.
thanks
~Raj

Motion/opacity (still) not working when using Time Remapping

Similar Messages

Maybe you are looking for