Motion Paths moving behind and then in front of text - PROBLEMS

I'm working on a motion project where I have 2 lines of text and am using a particle emitter on a motion path. I've got the emitter moving along the motion path behind my text and then I want the emitter to move in front of my text and cover the fade out of my text. Giving me the swipe look. I've set the motion path in the TOP and LEFT view to properly move from the background to the foreground. Yet when I export the emitter is still in front of all the text. I've tried placing the emitter below all the text in the same 3D group and still no luck, the emitter stays behind the text the whole time.
Anyone have any ideas?
Thanks,
Matt

maybe your depth ordered box is unchecked. Its below the emission sliders...

Similar Messages

Sharing iTunes and then using Front Row

I have been downloading all the album artwork just like everyone else is, now that iTunes 7 is out.
I have run across a small problem and a fix I would like to pass along for people having problems viewing the album artwork on a computer that is sharing the iTunes from another computer and then using Front Row.
First off, the artwork for me seems to work fine on all individual computers that have the songs and the album artwork on it.
When I shared my 'master or main' computer iTunes with my Mini Mac Intel, I then played the music using Front Row but the majority of the album covers would not show up.
For some reason only a few of the album covers were showing up in Front Row on the shared computer. It took me quite awhile to figure out that the only album covers that were showing up were the album covers that I dragged and copied onto the main computers iTunes album window.
I don't know if anyone has found anything easier to fix this problem but I went ahead a copied all of the album artwork, one by one, on the main computer into the iTunes artwork window. Now, all the computers that access the main computer via sharing, shows the album artwork when using Front Row.
I hope I explained this clear enough.
Here is a photo of my Mac Mini hooked up to my TV, playing Front Row and using the shared iTunes Library from my main computer which is an iMac G5.
http://users.sisqtel.net/jkriz/MacMini/frontrow_albumcovers.jpg
I needed to use the flash for this photo because it was getting dark but I think you get the idea.
I know I could have put all my music on the Mini Mac or any of my other computers and I wouldn't have had to go through all of this... but then I would have trouble keeping all of my computers music up to date. This way, I only have to keep the main computer up to date with all of my music. Much easier.
If anyone has any other suggestions, please let me know.
I hope the rest of you can benefit from this tip.
iMac 17 (Intel), iMac G5 (Rev B), Mac Mini (Intel) Mac OS X (10.4.5)

Bizmarck,
Well, this is interesting.
When I first read your question I said to myself, of course I can play the shared slideshow along with the selected shared music.....
Well, I'm glad I tried it out first before I posted this as I cannot play the selected songs on the shared slideshow. All I could play was the Minuet in "G"....
I could have sworn I used to be able to do this with 10.4.7 and Front Row 1.2
However, I could be wrong.
I have tried everything.
I have the Serving computers iTunes and iPhoto open and to allow sharing of both.
On the Mac Mini which is playing the shared items from the serving computer, I can turn off the music but I cannot select a song from the shared library in iPhoto. All the library shows for music selection on the Mac Mini is the music that is on the Mac Mini.
Apparently Apple has more work to do if this is going to work.
It is interesting to me that we cannot play a shared slideshow along with the shared music that was selected with that slideshow.
If the selected song from the shared slideshow is already on the Mac Mini, then I can choose it, but I cannot choose any other songs unless they are on the Mac Mini.....
It seems that Front Row will not play the selected shared song from the shared slideshow. Front Row only wants to play the songs that are on the Mac Mini for any of the shared slideshows... BUMMER.......
If you open iPhoto (not Front Row) on the Mac Mini, then select a shared slideshow, then click on the 'Play' button. You will see that Minuet in "G" is selected to play on that shared slideshow. I turned all of mine OFF for the time being as I am tired of the sample music also.
If I come up with anything new I will post it here.
Thanks for sharing this information.

Why is speaker behind and not on front. I want to listen clearly what I am watching

Why is speaker behind and not on front. I want to listen clearly what I am watching
<Edited by Host>

nitzz wrote:
Why the
http://www.apple.com/feedback/ipad.html

I can't open my iPod Touch - tried the restore message and then error mewssage 3014 - iOS problems???

I can't open my iPod Touch - tried the restore message and then error mewssage 3014 - iOS problems???

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Exchange Admin Center 2013 SP1 worked for a day and then stopped working, possible OAB problems

Here is a problem that has me confused. On a fresh Windows Server 2012 R2, I installed Exchange 2013 SP1. It was successful and for the first day everything was working well. I then installed all security updates. The next day, I could no longer log in to
the Outlook Web App or Exchange Admin Center. I get the generic "something went wrong" message, and the only details are X-FEServer: LAKEVIEW-SERVER (our server name). Nothing else. In the event viewer, I have the logs below every time I try to log
in. This is repeatable. Every time I attempt to log in the same 3 things appear in the Application Log.
Event 1003, MSExchange Front End HTTP Proxy [Oab] An internal server error occurred. The unhandled exception was: System.Configuration.ConfigurationErrorsException: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Event 4999, MSExchange Common Watson report about to be sent for process id: 2460 (IIS Worker Process, w3wp.exe), with parameters: E12IIS, c-RTL-AMD64, 15.00.0847.032, w3wp#MSExchangeOABAppPool, System.Web, S.W.C.HandlerFactoryCache.GetHandlerType,
S.Configuration.ConfigurationErrorsException, e0bc, 04.00.30319.34009. ErrorReportingEnabled: True
Event 1310, ASP.NET 4.0.30319.0 Event code: 3008 Event message: A configuration error has occurred. Event time: 5/8/2014 9:46:45 AM Event time (UTC): 5/8/2014 4:46:45 PM Event ID: 2c98a65728a7475db0212291e3934ab7
Event sequence: 19 Event occurrence: 9 Event detail code: 0 Application information:     Application domain: /LM/W3SVC/1/ROOT/OAB-1-130440407246522811     Trust level: Full     Application Virtual Path: /OAB
    Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\OAB\     Machine name: LAKEVIEW-SERVER Process information:     Process ID: 2460 (IIS Worker Process, w3wp.exe)
    Process name: w3wp.exe     Account name: NT AUTHORITY\SYSTEM Exception information:     Exception type: ConfigurationErrorsException     Exception message: Microsoft.Exchange.HttpProxy.ProxyModule,Microsoft.Exchange.FrontEndHttpProxy
does not implement IHttpHandlerFactory or IHttpHandler.    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String
type)    at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Request information:     Request URL: https://localhost:443/OAB/     Request path: /OAB/     User host address: ::1     User:     Is authenticated: False     Authentication
Type:     Thread account name: NT AUTHORITY\SYSTEM Thread information:     Thread ID: 18     Thread account name: NT AUTHORITY\SYSTEM     Is impersonating: False     Stack
trace:    at System.Web.Configuration.HandlerFactoryCache.GetHandlerType(String type)    at System.Web.Configuration.HandlerFactoryCache..ctor(String type)    at System.Web.HttpApplication.GetFactory(String type)
at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
My first guess is to reset the Outlook Address Book by using the Remove-OabVirtualDirectory Exchange commandlet. But I am not so sure this will work because Exchange worked for a day. Any help understanding what caused the problem (and thus help avoid it
happening again) and how to fix it are appreciated. Thanks.

hi,
If nothing works try resetting the Virtual Directories.
For owa
Open Exchange Management Shell (EMS), and then run the following cmdlet to change the authentication method of the "owa" virtual directory to Windows authentication:
set-Owavirtualdirectory -identity "MBX\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false
-Formsauthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For ECP
Start Windows PowerShell.
Type the following commands, and then press Enter after each line:
Add-PSSnapin *exchange*
Set-EcpVirtualDirectory -Identity "MBX\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
Run the following command on both the Client Access and Mailbox servers to restart Internet Information Services (IIS):
iisreset /noforce
For Ref: http://technet.microsoft.com/en-us/library/bb123752(v=exchg.150).aspx
I did those commands. But remember, the original error I gave was related to the OAB virtual directory, not ECP or OWA. I also did the Remove-EcpVirtualDirectory, Remove-OabVirtualDirectory, and Remove-OwaVirtualDirectory commandlets and the corresponding
EcpVirtualDirectoryOabOwaVirtualDirecoty ones. I still cannot log in to the Exchange Admin Center. And I still have the same original generic unhelpful error message.
However, there are some changes. After I removed and re-added the virtual directories I no longer received the original error logs given above. I now get this log in the event viewer:
Event 2001, MSExchange Front End HTTP Proxy
[Owa] Failed to load SSL certificate.
The first logs I gave above always appeared after attempting to log in. This log that I gave appears infrequently and is not connected to any log in events. This log occurs only
after a similar log given below:
Event 1001, MSExchange Front End HTTP Proxy
[Owa] Application Starting.

Powershell script - how to read a registry hive and store the value in text file and then again read the text file to write the values back in registry

Hi All,
powershell script Method required to read a value from registry and then taking the backup of that values in some text file.
For example the hive is
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path
and under path i need to take back up of values in some text file and then put some value in the registry after back is taken in text file.
Also how to read the text file values so that we can again write to registry hive back from the back up text file.
Your help is much appreciated.
Umeed4u

I think you need to read this first:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Firefox is not displaying all the images on any of the websites that I access. I upgraded to 4.0 and it worked correctly for about a day and then reverted back to the problem.

When I open a website using Firefox it displays the text but none of the graphics. I upgarded to 4.0 and it was temporarily corrected. Now it has reverted to no graphics,

Hi there,
I have the same issue: FireFox is not showing all images on the page.
Noticed this in FireFox 5.0. Now I installed FireFox 5.0.1 and still have the same issue.
The missing images do not even appear in Tools > Page Info > Media.
The images are usually accessed using DIV tag with a CSS class which contains background-image style. Often, when page opens, the DIV is initially hidden, and JavaScript displays it. Sometimes, jQuery.html() adds such DIV tags, and images rarely appear. Sometimes they do, but more often they do not.
If I install FireBug and use Inspect Element to find such a DIV, it is there, it contains the CSS class, the definition of the CSS class contains background-image style. If I click the icon to disable this style, and then click it again to enable it, the image immediately shows up.
Seems to be caused by some optimization which does not detect images like these.
Hope this helps you reproduce it.

Have to go out and then back into a text message to see reply

Is anyone having issues with the message app? when I am texting back and forth, I have to go out of the message and then go back in to see my friends reply?
I hear the sound that they replied but don't see the message.. Anyone else having this issue?

Wow - Thanks you - pretty funky bug.. Thanks for the help - rebooting did the trick.

My phone switches off after showing horizontal lines on the screen during the restore process and then shows the error 9 problem. please help i am so stressed.

Hello
My iphone 4S switches off after showing horizontal lines on the screen cutting through the apple logo during the restore process and then right after my iTunes shows the error 9 message, this happened 2 days ago when my phone just switched off unexpectedily and has been in this recovery mode since then. i have watched videos on Youtube and i have disabled Firewall before starting the process, i think i have done almost everything. please help anyone what do i do from here?
Just for interest sake i watched this video on youtube where this guy had the same problem but the difference is that he had it on an iPad. he opened the ipad up and did something on the ipad, it took less than a minute then his ipad worked.
I would appreciate it if someone would respond to this as fast as they can i am so stressed.
Regards
Lwando

Read here:
http://support.apple.com/kb/ts3694#9
Error 9 is usually a security software issue.

Have a form trying to edit. Has a bunch of check boxes but also text fields. I can move the fields and make them larger but I can't edit or move the text above the fields. Like it says "Enter comments Below" and then there is a text field for them to e

It looks like this:
A. What can be done to improve performance?
B. What can be done by assessor to help performance?
C. Comments?
Issue is the text field below these items is not big enough. When I make it bigger, like in "A" it gets bigger but then overlaps the text in "B" and I can't move the text. Someone else created this form and I have no idea what A, B and C are but they are not Text Fields. They are just static text of some sort and I can't do anything with it.

Hi,
Try making the subform that contains your fields flowed, this will allow them to not overlap, but you will probably have to add some margins (or some 'spacer' subforms) to get the appearance you had.
Regards
Bruce

I want to display all errors in a listbox. Is there a simple way to do this, such as a vi that takes as input: error_in, error_out, listbox and then appends the error text to the listbox if the error_out is different than error_in?

would like to display time of occurrence and error text, so possibly a table instead of a listbox

You can check on the alliance page for a product that does this, but there are no LabVIEW utilities to do this specific task. You will have to build one yourself it seems.

Put in DVD and then no dvd action, finder problems

If I put a dvd in nothing happens and disk utility freezes.
DVD wont come out, wont mount, wont spin.
Eventually finder bogs down.
REstart with disk in is necessary to regain normalcy.
This is a fresh system reinstall a few days ago.
Same problem prior to reinstall too.

"by removing it and making an appointment at the genius bar?
AASP??? nerd division of AARP?"
Either genius bar or Authorized Apple Service Provider. That's so you don't have any clunk head messing with your Mac.

Has anyone had trouble downloading the updated iPhone/iPad software? My computer downloads it and then says there is a problem at the very end and won't update my iPhone or iPad.

Has anyone had trouble downloading the updated iPhone/iPad software? My computer gets to the end of the download, says there is a problem and won't update my iPhone or my iPad.

Has anyone had trouble downloading the updated iPhone/iPad software? My computer gets to the end of the download, says there is a problem and won't update my iPhone or my iPad.

Positioning Motion Paths

How can I set the x and y coordinates on a motion path so that the path ends at a precise location?
I have 3 objects on a slide that I want to move and left-align. I've been using the trial-and-error method of adjusting the motion path arrows, previewing, and then moving the arrows again, but that is tedious and unexact. It would be much better if I could just set the desired coordinates.
I thought maybe I could edit the xml file, but I'm a long ways from being advanced enough to understand what I'm looking at so I don't know if that's even possible.
I'm using CP 6.0, if that matters.
Thanks for your help.
Dan

I really want there would be an easy way...but there isn't. Either you have to plunge into the XML that defines each effect, also the motion path (most of them are relative to the present position of the object on the stage), or you find another way. I can only explain my way: in my templates I always have a crosshair, object group with a vertical and a horisontal line that I can position exactly using the Transform accordion. Motion paths are always referencing to the center point of the bounding box of the object, I drag the start or the end point of the path on the crosshair. Maybe a screenshot would explain better, but I have to switch the browser, forum doesn't allow posting images with Chrome for the moment.
Lilybiri

Motion path handles disappeared

I've been working in After Effects for a little while now and am having some of my motion path handles not appear when they should. I'm working on a slideshow and they seem to appear for all of my other pictures. What I do is go in between the start and end point of a path and move my picture away from the main (straight) motion path I created which usually creates a new keyframe on my timeline and inserts a point on my motion path with two handles I can adjust to make the path curved. This time it just creates the point on the motion path and keyframe, but doesn't allow me to make the path curved. It's really strange and has happened to me before. The way I solved it earlier was to remove the point where it wasn't working and insert a new one, and it would magically turn on, but that doesn't seem to work now.
I've only been able to find one other person that had a similar problem online, which was solved by going to view---->view options and enabling 'view handles'. This didn't solve my problem so I figured I would ask on here. Thanks in advance for the help.

That worked, although it's a few extra steps that I shouldn't have to take (and haven't prior to this). I held down alt by mistake at first and it only gave me one handle, but if I just tap alt and then click--->drag away from the point, it does provide me with a handle in each direction, which is what I was ultimately needing. Here is a screenshot of that layer although it's pretty standard.
When I selected a keyframe that was in between the beginning and end of the motion path, pressed G, and then hit alt it does exactly what I want it to, but usually it adds the handles automatically, and want it to always. This extra step is very annoying because I'm dealing with a lot of motion paths and plan to in the future as well.

Motion Paths moving behind and then in front of text - PROBLEMS

Similar Messages

Maybe you are looking for