Motion Stabilizing, Working but causing very slight shaking :(

Hey its my fisrt time using Tracker and Stabilizing motion. I tracked the guys thumb and its taken out a lot of wabble but in other clips the same thing happens (please see link)
http://www.youtube.com/watch?v=QToAAibmx1Y
Anyone know whats causing this tight shake?
Cheers

I think Rick's got a good point: this appears to to have been VERY shaky video at one time. 
AE's intended to correct minor flaws, but you can't count on it to work miracles.  There's a very simple way to make things easier on yourself: use a tripod when you shoot. 
And if that's not in the budget, here's a low-cost alternative: fill up a heavy cloth bag with playground sand, put it on some stable object, and nestle the camera on top.  The sand in the bag will conform to the camera's shape, and you'll have a stable shot.

Similar Messages

  • How embed 'clean' ID and password in Muse Secure Area sign-in works, but looks VERY klunky

    I built the website for a charitable organization of local business people who pump a lot of money back into youth-related activities in the local area.  They wanted a Secure Area so members could access other member phones, addresses, and other personal info.  I set up a Secure Area - and it works fine.
    But -- since I'm using Muse, I had to embed the Secure Log-in into the Muse page in the Admin Area.  It essentially pastes the log-in HTML into the Muse page.  As I said, it works, but it looks absolutely terrible !
    Do I need to have someone help me build a clean HTML that I can embed ?  (Since I maintain the site by updating Muse and publishing to site, I need to embed the Log-in HTML every time I publish an update.)
    Is there some other way to plug in the Secure Area log-in ?
    Thanks,
    Dick Fox
    [email protected]

    Hi
    Are you using Business Catalyst to host the site and using secure zones with Muse pages ?
    If yes then you can change the login window and style it accordingly from admin area.
    Example mentioned here :
    http://kiyuco.com/tutorials/install-a-lightbox-style-login-form-on-business-catalyst-with- fancybox
    Thanks,
    Sanjit

  • Flash works, but causes IE8 to hang when multiple tabs are open

    I have a problem which is very consistent...  If I open IE8 to my home page (non flash), then open another tab (and go no where, just a clean tab) and then try to close IE completely (saying yes to close all tabs prompt).  IE hangs for about 30 seconds before shutting down.  If I disable the add-on for flash and then repeat the steps, IE closes right away without incident.  Any thoughts?  Happens every time...
    As a side note, this is a XenDesktop Windows 7 image fully patched and running the most current version of the Flash plug-in.
    Thanks in advance!
    Eric

    See http://kb.mozillazine.org/Firefox_crashes and [[Firefox crashes]]
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx).
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    You can open the <i>about:crashes</i> page via the location bar, just like you open a website.
    See: http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter) and [[Mozilla Crash Reporter|Mozilla Crash Reporter: Breakpad]]
    Your plugins list shows outdated plugin(s) with known security and stability risks.
    * Shockwave Flash 10.0 r22
    * Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Printer (Photosmart c4680) works but is very SLOW and gives message ":Sending print data".

    Tttle says it all. This is a fairly new printer. Using genuine HP ink.

    If printer is in warranty, contact HP tech support for possible replacement.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • My FTP works but is very slow, hangs on 'waiting for server', fix???

    Hi guys
    My FTP connects but its constantly hanging and saying 'waiting for server', eventually it connects.
    My other ftp clients connect instantly, its just DW, sometimes my filezilla may halt but not as bad as DW does.
    I can use port 22 and its instant but reading this http://forums.adobe.com/thread/734356?tstart=0 will tell you why I can't use port 22.
    Not sure what to do here, ive tried changing loads of settings and I get the same thing, I dont want to have to use an external FTP client as that would slow my workfllow considerably.
    Also I think its a mac issue, if i try this in another building on windows 7 it connects instantly.
    If i set my timeout to something really high like 90 seconds it eventually connects.
    Anyone got any ideas??
    Thanks

    So using a separate FTP client is out of the question? I ask because my workflow uses a separate FTP app - it makes it much easier to troubleshoot FTP, server, and file permission issues. And it doesn't crash Dreamweaver. So again, are you sure you can't adjust your workflow to use a separate FTP application? (I use Transmit on the Mac and it has some wonderful features including a built-in Sync capability)
    How do you have Dreamweaver's FTP functionality set-up?
    Are you using Passive FTP?
    Are you using a reverse proxy server in your network?
    Have you tried the Mac Network Utility to ping your FTP server?
    What kind of ping times are you getting?
    Do you experience network latency issues frequently?
    Do you have Mac OS X's Firewall enabled and have you tried disabling it before an FTP session - does this effect anything?
    Have you tried unchecking Dreamweaver's Use FTP performance optimization? (Site Definition->Advanced->Remote Info->Server Compatibility)?
    Do you have any network engineers in your IT department? Can they look at their information and maybe see what might be happening on the network?

  • Hi there I have updated to your lates version but every time I open up the browser and new windows I get this error message 'TypeError: Components.classes[cid] is undefined' although it does work but the message is very annoying

    Question
    Hi there I have updated to your lates version but every time I open up the browser and new windows I get this error message 'TypeError: Components.classes[cid] is undefined' although it does work but the message is very annoying

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My iPhone works but screen is very,very dim,any ideas?

    My iPhone works but screen is very,very dim,any ideas?

    I've tried all that stuff nothing happens. I've even fix a new screen on still the same?

  • Track motion - working but AE stops responding so must force quit

    Hi,
    I'm on:
    AE CC 2014 v13.0
    PC with Nvidia k4000 and 32GB RAM
    Working with 4k R3D footage.
    I'm using track motion (transform - position, scale and rotation) on a precomped layer that has 2 circle effects on black background. (I'm trying to extract warp stabilizer data because the stabilizer works great for 98% of the shot but does something silly in the middle of the shot so I want to key frame the stabilization).
    The tracker seems to be working but after a while I can't stop the tracker or do anything else within AE. The program hasn't crashed but it fails to respond to any commands. Even once the tracker gets to the end of the clip and stops I still can't do anything.
    Really I just need the position, scale and rotation data from an applied warp stabilization of a certain clip. Anyone have an alternative way of doing this?
    Really wish warp stabilizer had some key frame control!
    Thanks,
    Josh

    Take your RED footage out of the equation. this stuff is flaky in CC 2014 and may have all sorts of ill side effects. Also check the track settings and the duration. Perhaps it's simply too long and AE takes forever to create those gigazillion keyframes...
    Mylenium

  • SQL Query works in MS Access but caused SQL exception

    Hi all,
    I've got this query that works if I run it in MS Access but caused an SQL Exception if I run in my Java programme.
    The query
    SELECT Count(*) AS countPlayerMax FROM (SELECT Count(*) AS countSent, sent.mobileno FROM sent WHERE (((sent.date_sent) Between #2002-3-1# And #2002-3-8#)) GROUP BY sent.mobileno HAVING (((Count(*))>100)))
    The exception is
    [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
    I've done nested queries before but this one doesn't work. Any ides why??
    thanks

    Thanks for your suggestion
    I tried it but it still gives the same error, now the SQL looks like this
    SELECT Count(*) AS countPlayerMax FROM (SELECT Count(*) AS countSent, sent.mobileno FROM sent WHERE sent.date_sent Between #2002-3-1# And #2002-3-8# GROUP BY sent.mobileno HAVING Count(*)>100)
    the exception is the same
    [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.

  • Ever since I downloaded Acrobat Pro 11.0.09, the PDF Maker and Save As PDF have not worked, but instead cause MS Word 2013 to crash.

         Ever since I downloaded the Acrobat Pro 11.0.09, the PDF Maker has not worked, but instead causes MS Word 2013 to crash. I cannot find the cause or the solution.
    forumnotifier

    OK I will try to elaborate this time with pictures so it is clear what I am asking and what the issue I am facing is.
    The specific option I want to be able to use from within the Adobe Acrobat Pro user interface is
    File\Create\Batch Create Multiple Files
    When I select that menu item a floating tool bar thing pops up that I can drag and drop files onto.
    If I drag excel or powerpoint documents onto it and press OK it converts them fine.  If I drag MS word documents into it the documents appear in the list but when I click OK it says no files processed.
    In the process of troubleshooting I also tried using the Add Files button.  That is when I discovered that MS word documents (*.doc, *.docx) are not showing up in the list of supported file types.
    The same thing happens when I try converting a single file using the File\Create\Create PDF From File menu item. Just like above the MS word documents do not show up in the list of supported file types.
    Looking in my registry entries as suggested by the article linked to by one of the posters above I can see both *.doc and *.docx types registered in the correct place.
    Unless I can use the batch convert command as intended by the time my trial period runs out in 13 days I cannot justify buying this software. If converting the documents one at a time was acceptable I would just use Save As PDF from within MS Word which works just fine. I need the batch convert function so I can convert my whole library of word documents to PDF at once.
    Any further assistance greatly appreciated!
    Regards,
    Gray

  • HP Deskjet D2400 Printer series is working, but very slow

    Problem - HP Deskjet D2400 Printer series is working,  but very slow.  Pause 5-10min before the begin of print and between the sheets   OS-WIN XP SP4

    Hi there bozhk,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times.

    I can not export imovie 11 to youtube. I tried exporting with quicktime so I could upload through youtube,but it had no sound. Very frustrating. When I upload through youtube it looks as if it is working, but I get no confirmation. Tried it many times. What do I do?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

    G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already,  nothing ,..  Ppc g4 Mac

    Should I check the memory cards themselves? Reseat them?
    Yes.
    Memtest X or Rember to test the RAM.
    Reseat is also good.
    The iPhone 4 doesn't like USB 1.1 much.
    after the update the computer was working well, except for this freeze when ever I connect iPhone.
    I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
    Never an issue.
    Can't say the same for USB 1.1.......
    The above (previous post) linked PCI card is cheap enough.
    Want cheaper, try this:
    http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
    The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
    OS X has native NEC chipset USB support.

  • Firefox is taking way too long to load pages. I have a very fast internet connection but firefox takes forever to load websites. At first it worked fine and very fast but now very slow??

    firefox is taking way too long to load pages. I have a very fast internet connection but firefox takes forever to load websites. At first it worked fine and very fast but now very slow??

    Hi there!
    do you test other browsers?
    i suggest to make a clean install of newer version of Firefox like v8.0.

  • PhotoshopCC works but it's very slow

    We have installed Photoshop CC on my PC with Windows 7 and I5 Intel ,8GB RAM, it works but it's very slow, it's impossible to work. On the same machine Photoshop 5 works very good!! There is something that I have to do to increase the performances ?

    Moving to Photoshop forum.
    Regards,
    Romit Sinha

Maybe you are looking for