Motion Stops Analyzing Movement!?

Hi,
I have motion and I am trying to stabilize a speech. When I apply the stabilize filter, I set the Position, Scale and Rotation on and on border, I use the Zoom. It only analyzing 10 seconds out of nearly a minute and no mater what I do, it won't analyze all the footage.
I don't have keyframes set up and the only solution I have found is to go the end of the stabilized footage, copy, paste it and then drag it out, to continue the clip from where the stabilization left off, and then add the stabilization filter to the new clip. I'v had to cut up the same clip up to 3X, set a stabilization filter to each part of the clip, just to fully stabilize it.
Any help will be greatly appreciated,
Zevie

I believe this happens when the analysis can't figure out the sampled pixels' movement. It will usually, by default, retry, but in some cases, just can't figure it out. You can set the tolerance of this in the Anchor and Rotation drop-down menus (ie: Fail Tolerance / Fail Behavior) and also tweak the Look Ahead setting slider bar.
Sounds like you figured it out, but this has been my experience when trying to match/mimic motion video.

Similar Messages

Motion Tracking - Match Move

It's yet not possible to send a clip from FCPX timeline directly to Motion 5.
If I want to use "Analyze Motion" and "Match Move" everything must be done manually, what is a pain in the ???.
No workflow at all.
Does someone has a workaround, if I want e.g. to make a Title "Match Move" to a previously "Analyzed Motion" of a clip directly from FCPX's timeline?

Thanks, I did set the "Render" to "Best", hit Analyze again, saved the file, went back to my FCP project which contained the file/clip, had to render again.....but got the same results, might be a touch improved, can't really tell. Maybe I'll start over and just cover the entire flat screen tv w/ the video to ensure that none of the white image from the tv seeps around the edges??

Stopping a movie at a certain frame dynamically

I have a picture gallery that uses a simple go to next frame
when the button is pushed, and images are dynamically loaded into
the flash shell, I want to set a text file variable to stop the
movie from going any further, just disenabling the button function
or??
thanks

sorry..
i think what u are telling me is correct..
i will try it and let you know..
the movie is in frame 1 and after the movie is done i do want
it to move to frame two like u said above, which i will use the add
_parent.play();
i tried using add_parent.play(); but it didn't work
here is the code i am using to scroll the window so it looks
like the window is moving along a line...
onClipEvent (load)
xcenter=150;
speed=1/10;
onClipEvent (enterFrame)
var distance=-xcenter;
_x+=(distance*speed);
add _parent.play();
this is what my flash file looks like.. it;s just an example
i drew up really quick.. what it does is that the line travels
through the white box and when the line comes to an end i want it
to move to the second frame and contiue the tween in frame 2.
make sense?
Click
here to see the screen shot

How to stop rented movie to download

Rented a movie. Not enough space on ipad for it... Used apple tv insted... But cant stop the download on ipap... So now ipad memory is blocked for the movie... Need help to cancel the rent/download on the movie....

I tried a test to see if I could stop a movie download, and I was able to do so.
From the store, under downloads in progress, it shows a 1 in red with an arrow. I tap on that and it shows the video in progress. In the bar above it shows EDIT. Tap on EDIT. It now shows a circle and if I tap that it gives me the option to cancel. It then shows a confirmation to delete the download in progress.
See if that works and holler back...

HT200047 when watching a movie sub titles keep popping up and wont go away unless I stop the movie and restart it. I have sub titles and closed caption off but it still comes up.

dont know what to do. When watching a movie, closed caption comes up and it wont go away unless I stop the movie and restart it. Closed caption and sub titles are off but still comes up. I restored my apple tv to factory settings to see if that would stop it, but it didn't work still comes up. What can I do?

Hi,
I suggest you try the steps in this thread for test:
Disable Suggested Sites does not work.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
Regards,
Vincent Wang
TechNet Community Support

Apple TV stops during movie.....

Last Thursday I downloaded from iTunes the movie TRON. I was watching it using iTV when about an hour into the movie it just stopped. The movie was fully downloaded. During my troubleshooting on my computer the TV screen went to screen saver and it brought up my photos as usual.
Since Thursday I have tried everything I can think of and found on the troubleshooting page, but to no avail. Computer, iTunes and iTv are all up to date. iTv has been restored. iTV recognizes my computer for I see the name of my library but that about it. After I restored iTV I no longer see my photos on the iTV screen saver. The message I keep receiving on the TV screen goes something like this: Apple TV can't find the library. Make sure you are on the same network and turn on home sharing". I have only one network and iTV confirms the network as well as showing a strong signal strength. Home sharing is turned on in iTunes and iTV as well as photo sharing.
Any ideas? It would be appreciated....

Ok, problem solved. ATV now works as advertised.
One of the first things I did when this problem arose was check my computer settings, including my anti-virus software VIRUS BARRIER. In VB I made sure that all firewalls were down and all data entering and leaving my computer was set to "no restrictions" and nothing worked. VB is set to download updates automatically. Apparently when this issue started it updated the program during the movie play thereby doing something to stop the movie from playing and my library not to load. Yesterday I went back into VB and noticed a master ON/OFF switch that was set to ON. I turned it off and once I did that my library was able to load and I am back in business. I could swear I never saw that switch before for I have had VB for over 2 years. Guess it was just one of those things I just overlooked.

HT1657 I just rented a movie didn't see it just pressed to see if it starts all good I stopped the movie and now can't find it anywhere to see what happened I supposed to be able to see it during 24hrs as many times as I wish... Plz help to find it on my

I just rented a movie didn't see it just pressed to see if it starts all good I stopped the movie and now can't find it anywhere to see what happened I supposed to be able to see it during 24hrs as many times as I wish... Plz help to find it on my iPhone.

I just rented a movie today, and finished it. But now I can't find it. People say that it is in the Purchase, it's not there

I downloaded a movie to my ipad, when synced with computer, the computer is now also downloading the movie. why? and how do i stop the movie from being downloaded again

i downloaded a movie to my ipad, when synced with computer, the computer is now also downloading the movie. why? and how do i stop the movie from being downloaded again

Do you not want a backup of the iTunes content on your computer in the event the iPad is lost, stolen, or simply fails?

How can i stop my movie for 5, 6 or 7 seconds?

how can i stop my movie for 5, 6 or 7 seconds in actions scrip 2.0 or 3.0

Look at using a stop(); command followed by a setTimeout() function call that ends up calling a function that executes a play command...
stop();
var stoID = setTimeout(startAgain, 5000); // 5000 milliseconds
function startAgain(){
play();

Any one know how to stop iTunes movies from playing menu music when movie is paused?

Anyone know how to stop iTunes movies from playing menu music when the movie has been paused?

JourneyMan24 wrote:
Anyone know how to stop iTunes movies from playing menu music when the movie has been paused?
Can't. This is done for the individual movie, not by iTunes.
Some have it, most don't.

How to stop my movie by using stop(); but keep my buttons working

Hi,
Im making a website using flash,
And on my movie it says Welcome to Blah Blah Blah,
And then a button appears, To make sure my button works,
The writing turns to bold and goes bigger,
When the button appears it works and goes bigger,
Until it reaches the point in the timeline where it has stop();
It stops my movie from looping or restarting which is what i want,
But it stops my buttons from working aswell, How to keep my button working but movie stops,
If you want me to explain more just ask

Nevermind i have fixed this,
But are still needing urgent help on one thing,
http://forums.adobe.com/thread/456310?tstart=0

How do I stop a movie clip from looping

I am using Action Script 3 and the 'stop()' function is not working to stop my movie clips from looping continuously.
I have added the 'stop()' function to the last frame on the timeline of each movie clip.
I originally built the .fla file in Flash CS6 using Action Script 2 where it was working with no problems (I have since upgraded and don't have access to CS6 anymore).
I have all the separate movie clips positioned on Frame 1 of my main stage with the following script to start them playing:
Cigarette_Reveal.play();
KickTheHabit.play();
BallMove.play();
BallFlip.play();
Offer.play();
I want each of these movie clips to stop playing after one animation sequence is complete.
Please help!

Turn on strict mode in your publish settings. This will allow you to see the compiler errors that are preventing the actionscript in your fla from compiling correctly.

[svn] 3524: Do not destroy thread locals in the MessageBroker.stop() function, move this to a

Revision: 3524
Author: [email protected]
Date: 2008-10-08 13:36:07 -0700 (Wed, 08 Oct 2008)
Log Message:
Do not destroy thread locals in the MessageBroker.stop() function, move this to a
separate function that gets called on by servlet destroy().
Allows the case where the MessageBroker class is used outside of the servlet context.
QA: Yes
Doc: No
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
blazeds/trunk/modules/core/src/flex/messaging/MessageBrokerServlet.java

Talked with Go Daddy and it looks like the cause of this is some kind of incompatibility between Safari 8 and their workspace 'securesever' online CLASSIC VIEW. If you click the "UPDATED VIEW" on the top right hand corner, you will get a new view and it should solve the logout due to inactivity error when clicking on the email or sending the email.

How do stop a movie from downloading

How do I stop a movie from downloading

Let it download and then delete it.
You cannot stop it otherwise.
You can try contacting itunes support and see if they will remove it.

Apple Tv stops during movie several times to load. Very ANNOYING

Why does my Apple Tv stop during movie several times to load. Very ANNOYING

This will be due to the network.
What is your current connection vis speedtest (needs at least 6mbps)
Make sure DNS is set to auto (setting - general - network)
If on wifi try ethernet

Motion Stops Analyzing Movement!?

Similar Messages

Maybe you are looking for