Motion: Text Tab on the Inspector not working ... need some help!

I am having trouble getting the text inspector to display its properties in Motion.
I installed Final Cut 3 Twice.
When I go to Motion, i select the text icon.
I then type some text, then press the escape key.
Then I click on the inspector tab. From the four tabs listed, i then select the Text tab.
However nothing comes up and is blank.
I am not sure what is causing the issue. Any help to overcome this issue would be a big help.
Thanks!

yeah i resolved duplicates, removed the ms fonts set as well as the ms fonts folder from my /libray/fonts
however that alone didn't solve the prob - reinstalling motion and updating did so I don't know if it necessary to do the above before installing again or if installing will be enough.
on a side note- it's always good practice to stop ms office from installing its fonts because of such conflicts. Also, since fcpro software seems to be the most temperamental in apple's stable, I suggest that anyone dependent on this software for money keeps their main production rig free from any other sw if poss.

Similar Messages

  • HT1863 i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help

    i have my serial number. I bought this macbook pro in Cleveland Ohio, and it is still under warranty. Now I am travelling in India and my disk drive is not working. need local help. in chennai. I also need to retriwve my warranty paper online, as I am right now in chennai ad all my docs are in Cleveland.

    You posted in the iPad forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
     Cheers, Tom

  • Color correction arrow in the inspector not working

    I noticed today that my color correction arrow in the inspector is not working. I click and click on it and it doesn't show the color board. The only way to show the color board is to use the shortcut command-6 or to click below and "show color board." So I can still get to the color board but it's frustrating that the arrow will not work. The arrow does work, however, to get from the color board back to the inspector. I am using the latest version of Final Cut X. Anyone else have this issue? Would love some help!

    It's the multicolored arrow in the bottom right. It has worked before today with no problems. I don't know why it just suddenly stopped working.

  • How can I move from the text body to the inspector in voiceover - need to change spacing

    I want to get to the inspector (for formatting text in Pages), but cannot seem to find the correct keystrokes.  After marking text, I would like to double space (or go from double spacing back to single spacing). 

    You're welcome
    If those pages are publicly accessible without the need to log in and authenticate then you can post a link and I will see if I can come up with some code for [https://addons.mozilla.org/firefox/addon/stylish/ Stylish] or [http://kb.mozillazine.org/userContent.css userContent.css]

  • Imovie - Audio overlay not working on some HELP

    Hey Guys,
    i trying to make a movie and i made loads in the past, and managed to get audio over a cut away. For some odd reason it is now not working, it is on one of the clips, but even with that it chooses when it wants to work, on a few it has a yellow triangle with ! in it, and i thought o i moved file location, so i even replaced it, and it did not work, :/ i have tried turning the speaker thing off and deattaching the orignal audio clip and movign the new clip of audio in and delete the actule clip one, that did not work, i tried having both playing at same time that did not work, just the orginal sound thing, i know the sound is there as when i have it on itunes on the right i can click play n it plays, but it ownt in movie, i have also closed down all paths so its not open anywhere else. it is stressing me out sooooo much and any help is appricahted, i just cant understand why it all worked yesterday but it wont today and on any other new footage n clips i place in. :'(
    regards
    K

    You're welcome. Glad I could help. Sound issues are one of those weird things that can originate from a number of sources. The important thing is it works!
    Please mark this post "solved" to the right of my name (you'll need to log-on to the forum). Helpful for others looking for a solved solution to a similar question, also helpful for me.
    Aloha from Big Island.

  • Link to query on the web not working. Please help.

    hi gurus,
    We have a few queries which can be viewed thru our internal Web page. These are links to the actual queries on the BW BEx PRD server. These links were good sometime back. Now when we click them, we can see the URL blinking, trying to connect. But it doesn't.
    Infact, when I try to 'display the query on Web' from the Query Designer, the same thing is happening. But the same queries display on web in QA. We have 3.0B/3.5
    I'm not sure what is changed in PRD. Any help is greatly appreciated.
    TIA
    Sharada

    Hello Sharada,
    Please make sure that all the web service are up and running. Goto Tcode SICF and you have to activate the HTTP web service
    [Activating and Deactivating ICF Services|http://help.sap.com/saphelp_nw70/helpdata/EN/f3/f8193c99f5a765e10000000a11402f/content.htm]
    [Activating an SICF Service|http://help.sap.com/saphelp_nw04/helpdata/en/9b/2b173f5ff48443e10000000a114084/content.htm]
    Click the link for more details about [Internet Communication Framework (ICF)|http://help.sap.com/saphelp_nw04/helpdata/en/69/ac75addb6811d6b2ca00508b5d5c51/content.htm]
    Thanks
    Chandran

  • Battery not charging, dim green light on Magsafe. Stuck at 37% battery life. Not sure the issue, so I need some help.

    Yesterday, my Magsafe power adapter/battery was working fine. I had  unplugged the machine last night to do some work, and I left it  unplugged all night. It held a good 90% charge over the night, and after  using it for a few hours I wanted to plug it back in. I noticed the  normally bright amber light on the Magsafe did not come on, but a faint  green light.
    The machine says "Battery is not charging", but no "Service Battery  Warning has shown up. I also attached an image of my results from  Coconut Battery, just not sure what the numbers mean.
    Any ideas?

    I reset the SMC, nothing changed, I took out the charger to clean, but there wasn't anything dirty.
    BUT as soon as I plugged the MagSafe out, the power percent jumped from 37% to 47%. Still not charging, I am very confused on how it charged??

  • Brand new to the Mac World and NEED SOME HELP with startup disk issues

    Hello everyone. I am a new Mac user and I purchased my mac on ebay. It's an iMac that came with tiger 10.4.11. I wanted to get a fresh start on the computer, since the person who had it before me did not erase all of his stuff. I didn't know what to do so I got a startup disk/install disk off ebay also. When I go to install it says "software cannot be installed on this computer." Before I bought the software, I had called the apple store and they said it should be fine to buy any install software to put on the computer. If I could get any help it would be appreciated. I had read previous threads that I should hold down c when I start up (didn't work) or that I should select archive or erase and install (I never got these options when I went to install).

    A warm welcome to the Discussions!
    What iMac is it? I only ask as the Retail Tiger CD/DVDs don't work on IntelMacs, only PPC, (G3, G4, G5 Macs).
    Sorry what you were told by the Apple Store, but if it's a Gray CD/DVD then it is Machine specific as Neil stated.
    Sooo, what exact iMac is it, and what does it say on the CD/DVD?

  • Hello, I can´t upgrade the iPhoto. I need some help.

    I just downloaded OS X Mountain Lion from the app store, (i had  snow leopard), and now i need to upgrade the iPhoto, when i'm doing it appears a message  saying that a failure has occurred and the program can't be actualized, the failure (error) number is "102". What should i do?.
    I hope you can help me.

    Download iPhoto 9.4.2 from Apple webpage if you purchased iLife in a box or it came with the computer > http://support.apple.com/kb/DL1608

  • Auto tab focus method is not working in iOS devices please share the ideas why its not working?

    Auto tab focus method is not working in iOS devices. Please share the idear i am facing this issue while developing code for devices.

    Hi there,
    I can confirm this bug.
    Not sure if this info is relevant, but this is my experience:
    I am on the FIDO network, and so are two other people I know.
    We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
    I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
    I have not yet had a chance to test this on Bell, Telus, or any other carriers.
    Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
    I have yet to try this, but hopefully someone will have a better solution.

  • When i install the new os my fcp,motion and many adobe software not working so please help me out.

    when i install the new os my fcp,motion and many adobe software not working so please help me out.
    there are so many videos on youtube but i want know any solution from apple side plz my so many works are pending becuze i am working as Video Editor.

    You need to be more specific about which software applications you're using, the versions and what happens when you try to open them.
    It would also be nice if you could include which model MacBook Air you're using.
    Clinton
    MacBook Pro (15” Late 2011), OS X Yosemite 10.10, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • HT204065 Group text with one non iPhone not working on iPhone 6 in the group.

    Group text with one non iPhone not working on one iPhone 6 in group. SMS, MMS and iMessage as well as group messaging are all turned on. Has worked intermittently but now cannot see or respond in that particular chain. Can send independently to the non iPhone (Samsung) but not in group. Other iPhone 6 and 5 in group work fine.

    The reason why you have to turn off 3Gs is because T-Mobile does not support iPhones 1700 something or other. You have to turn off the 3Gs on the iPhone to make it work.
    As already provided, it shouldn't matter since the iPhone is designed to automatically connect to the fastest internet connection available. If wi-fi access and 3G network access is on, when in range of an available wi-fi network you have access to and have connected your iPhone with previously, the iPhone will connect to the wi-fi network automatically. When leaving the range of the wi-fi network, the iPhone will connect to the 3G network if 3G network access is available. If 3G network access is not available, the iPhone will connect to EDGE or GPRS - whichever is available at the time.
    If this is unique to T-Mobile's network with the iPhone for some reason since T-Mobile is not an official carrier for the iPhone in the U.S. and you were instructed by T-Mobile to do so, then you need to do so.
    If this is not working now, the problem lies with T-Mobile and I have no idea what to tell them for them to recognize where the problem lies on their end.

  • Ever since the last IOS update, my Iphone 5c has been acting weird. The time is always off; It says that its 9:30 in the morning when it's actually 2pm. I try to fix it, but it just goes back to not working. Please help!!

    I go to settings and switch "Automatic time" off and then back on. It works for a while, but then just goes back to being off. I've tried manually setting the time, but it just goes back to what it was before. If I send a text, it sends and then disapears. I can't see what I wrote! I went in to Apple to try and get it fixed, but they just restored my phone. It's still not working. Please help!

    It's not hacker or a virus. You are experiencing what a number of users of iOS 5 are experiencing now - sluggish or less than perfect iPad performance. It seems that for some of us - memory management has gotten a little out of whack with this most recent update. Some of the basic troubleshooting steps that you can try are ....
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Close apps in the recents tray. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If you have Safari crashing issues - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    None of these steps should be necessary as part of your daily routine - the iOS is supposed to handle all of this without any user input. Once again - for some of us - the iOS is letting us down.
    Until Apple releases another update that resolves this issue for the "few" that suffer, keep these steps in mind and use them as needed.

  • I cant copy/paste from an article to my web site, get a Mozilla Rich Text Editing demo page will not work.HELP

    Tried to copy/paste from an article to my web site and got a "cannot copy /paste " warning and was directed to a security perferences site that said that Mozilla Rich Text Editing demo page will not work.
    Tried to find my Firefox profile directory using the start menu and was directed to hit enter to go to web. Feel like i am getting run around.

    Let's start with something very basic, and that is, you do not need to use the paste button on most websites. The button just reads what is on your clipboard and sticks it into the form. You can do that yourself using Ctrl+v or right-click>Paste.
    For your security, I suggest using those standard Windows keyboard shortcuts (Ctrl+x cut, Ctrl+c copy, Ctrl+v paste) or the context menu.
    Occasionally you will find a paste button that runs a clean-up script or otherwise does something useful. That is where the (admittedly a bit complicated) instructions come in handy.
    To open your active profile folder, you can use:
    Help > Troubleshooting Information > "Show Folder" button
    Which help article are you using for the modifications?
    Finally, please be cautious in opening up your clipboard to sites. You may have stuff you copied from other pages or other programs that you do not want to share with most sites.

  • Text-to-speech engine is not working

    when I want to use 'read out loud' in adobe reader and  foxit , I'm get no sound, I have similar problem in babylon that using TTS engine of OS.
    I'm using windows 8.1 64 bit.
    Do not get any error, but when play would have no sound.
    I previously didn't have any problem with these softwares.
    really need this functionality, please help me.
    Babylon support
    told me::
    Babylon uses a free text-to-speech engine that was developed by Microsoft and is part of Windows OS. please check with Microsoft support , why your text-to-speech engine is not working.

    Hi,
    If you go to the Start Screen, search for "Narrator" within All Apps and click it, what happens?
    In addition, please follow the steps below to check Speech Properties if there is anything wrong with it.
    Control Panel\Ease of Access\Speech Recognition\Advanced speech options
    Roger Lu
    TechNet Community Support

Maybe you are looking for