Motion tween is not running in the main scene

Hi guys,
I made a short movie at the beginning of my project and afterwards I made a symbol-movie clip with many motion tweens (at the end of the symbol animation I put stop(); ). Now I have a problem - how should I insert my symbol-movie clip after my first short movie? To one frame or to more ones? I have tried some ways but I have not found the solution - the symbol-movie clip is not ruuning in my main scene.
Thank for any help.

If your movieclip is a self-contained animation, then it only needs to occupy one frame of whatever timeline it is in.  If the intention is to have it play at the end of your short movie, then it should reside in the last frame where that movie is.  If you show a screenshot of what you have it might be easier to understand what you have.

Similar Messages

  • Motion tween- arrows not appearing, tween not working! please help?

    I select where I want my motion tween to be, ctrl-click and select 'create motion tween'. It appears blue, and does not come up with an error message but no arrows appear like in the video's and the motion tween has not worked. Any ideas why? Also, I opened up a file that already had a motion tween in it (made by somebody else) to test it. I selected the motion tween and clicked 'remove tween' and straight away clicked 'create motion tween' again- to put exactly the same motion back into it, but the same thing happens- the selected area appears blue but no motion tween. Then, if I select it again, the option is 'remove motion' not 'remove tween' as before. A little complicated and could really use some help! Thanks!

    Thanks very much for the help. Classic tween has worked, the arrows have appeared and the figure moves but the shapes do not move around their anchor points and go all over the place before suddenly appearin in the right position on the very last frame.This is a screenshot of what i see on the second to last frame:
    And this is the last frame:
    I made sure all the anchor points were in the right place beforehand, any ideas why the shapes wont move right?
    Thanks.

  • Flash cs3 "Motion tweening will not occur on layers with ungrouped..."

    I am getting the error message: flash cs3 "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol"
    I have only one symbol in the layer, a graphic.
    Does anyone know how I can correct the "problem"?
    Thanks in advance.
    karen.

    as the above poster mentioned I am guessing you have more than one object on that layer. you may have created a symbol from a shape and not selected the stroke.. that is pretty common.
    to verify what is on a particular keyframe do a "select all" cntrl-a or cmd-a. maybe you will see more than one item selected.
    look at the properties panel. if you have only one thing it will note the symbol or it will say "mixed".
    perform this test in the first and last keyframe.

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

  • The Oracle BI server is not running. The repositiry had to be closed

    Hi guys,
    I have a OBI Standard Edition 10.1.3.4.1.
    I have modify the rpd and if I try to "Check In Changes", the error appears: "The Oracle BI server is not running. The repositiry had to be closed".
    In the nQServer.log this error appears:
    [nQSError: 12002] Socket communication error at call=recv: (Number=10055) An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
    Why?
    The problem persist if I restart the services.
    The problem only occurs if I make a change in the Business Model Layer. The changes in the Physical Layer do not generate errors.
    Thank you,
    Sara

    Hi Sara,
    Can you please let us know, if there are any other messages in the NQServer.out.log ? I just googled around with this code to hit at the following link : http://www.bookmark-master.com/socket-error-10055.html
    Socket error (#10055): No buffer space available.
    Analyse & Solutions:
    An operation on a socket or pipe was not performed because the system lacked sufficient buffer space or because a queue was full. This error indicates a shortage of resources on your system. It can occur if you're trying to run too many applications (of any kind) simultaneously on your machine. If this tends to occur after running certain applications for a while, it might be a symptom of an application that doesn't return system resources (like memory) properly. It may also indicate you are not closing the applications properly. If it persists, exit Windows or reboot your machine to remedy the problem.
    From the above information, I understand that this is a system resource issue. Can you please recheck if your system has got enough resources?
    Hope this helps.
    Thank you,
    Dhar

  • Motion Tween w/ Rotation Dropping on the Y Axis

    Is there a way to prevent a motion tween w/ rotation from dropping on the Y axis? Basically I used Free Transform to change the angle of a line, but it always lowers itself on the Y axis when I insert a motion tween in it.

    Hey there,
    The properties shouldn't be changing when you insert a motion tween. Could you either attach a file with the object *before* you create the tween, or let me know all the properties of the object before you insert the tween so I can try and reproduce internaly?  (X, Y, rotation, scale X/Y, skew X/Y).
    Thanks!
    Jen.

  • I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

    I can't say personally since I never used AW, but see if these articles help:
    http://www.macworld.com/article/1166370/open_old_docs.html
    http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
    I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
    Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
    SuperDuper! http://www.shirt-pocket.com/
    CCC http://www.bombich.com/download.html

  • Applet not running in the broweser.

    Hello everyone I have a problem that is bugging me.
    in my pc at home i have operating system window xp i have oracle9i installed and also java and j2ee and version of internet explorer is 6.0
    .there is no proble running html pages but the problem is the applet are not running in the broweser even the java demo from sun is not running
    .when i try to run the applet a dialog box appears and shows this
    " jvm not find Download now" i do not have internet connection.
    and one more thing i want to down load or save file in webserver
    i donot know whether my pc is having default webserver but when i type this "http://localhost" a page of oracle is display listing jserver ,appache server and so many thing.
    do i have a webserver that can be used by me for java program(adv java) or i have to get one .as i told you there is java1.3 and j2ee1_2_3
    something like this i donot remember is there no default webserver along with them .how can i use them for my java programe .
    let me remind you the applet not getting downloaded in the browser is a bigger problem for me.
    i appreciate your concern please help me out
    have a nice day bye.

    1} The applet is not getting loaded in my internet
    browser.Error messages? Are you sure your setup is correct? Search. "Applet not working" usually has only a small range of reasons, all well-covered here.
    2}why the oracle page is displayed when i type
    "http://localhost".
    Maybe because you have some Oracle webserver?
    3} Do i have any default webbrowser in my system.Yes. The one that opens when you double-click on an HTML page.
    >
    thanks.

  • HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

  • I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.

    I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.
    I guess what I have experienced might be a special case of 'Restore previous sessions'. The actual situation was that after I rebooted my laptop, Adobe update jumped out indicating an update being finished successfully. After I clicked on the 'close' button of the Adobe window, it automatically started firefox and linked to its website. But I did not find the 'Restore previous sessions' page this time. Then I restarted firefox, this time there was a start page with 'Restore previous sessions'. However, sadly enough, it is only restored my pinned pages plus the Adobe website. Actually, I am using 'bookmark all tabs' from time to time to secure opened tabs, but this time I did not expect such an incident. I would suggest to improve the 'Restore previous sessions' with multiple time tags and appear in all cases including my reported case here, after updating firefox, crashes etc. I like firefox in most occasions, therefore believe and hope it becomes better and more robust. Thank you very much!

    Hi,
    Please see the following support request: http://forums.mozillazine.org/viewtopic.php?f=38&t=2628065
    I think the best option would be to leave feedback here to let the relevant development team know about the problem you have had: https://input.mozilla.org/en-GB/feedback
    Also you could try the [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager] add-on which gives more control over how sessions are restored.
    I hope that helps

  • Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • OAM-Files do not run in the Content Viewer for Desktop anymore

    After updating DPS today animations made with Edge Animate (OAM-Files) do not run in the Content Viewer for Desktop anymore!
    What happened there? Any ideas?
    Thanks for help!
    I'm using mac OS 10.8.2 and InDesign CS6 CC

    I have updated Edge Animate today also with all files working & previewing perfectly within Edge. Upon publishing as OAM files for use in inDesign, the Poster loads as per usual, mark Play on Load interactivity on highlighted content holder as usual BUT when testing in Content Viewer file remains as a static poster image - unable to load animated atributes! I thought perhaps it may be a new viewing option so also uploaded page to DPS Acrobat Workspace & tested & the OAM file has not been assigned as inDesign. This is a massive issue! Our Magazine front cover needs its usual animation. Also tested previous files already live and they too do not view correctly in Content Viewer since update, as well are just a poster image!  Adobe need to fix this fast!

  • How to get a connection which does not participate in the main usertransaction

              Hi All I am on WLS 6.1 sp2 on win2k. I have a requirement which is like this: I
              use connection pools/txdatasources/JTA in my application. Now when a JTA transaction
              (UserTransaction) is active - I want to take a connection from the pool and do
              some operation and commit it independently of the UserTransction commit/rollback.
              Its pretty much like this - 3 components A , B, C (none of them are EJBs) are
              involved in a UserTransactions and all of them access database via a TxDataSource
              (say TD) which points to a connectionpool (say CP). Now I want B to get a connection
              handle which is not participating in the main transaction - so that the operation
              that B does is independent of what happens to the main transaction. Now I know
              I can use TransactionManager api to suspend a UserTransaction and then let B take
              a connection from the pool and commit it and then resume the transaction. But
              is there any easier way out of it? Like if B uses a DataSource instead of a TXDataSource
              - will that give B a connection which is not part of the main transaction? if
              not then whats the difference between DataSource and TXDataSource? Any help is
              appreciated.
              thanks
              Anamitra
              

    I would recommend that you mark the method as NotSupported or
              RequiresNew rather than using DataSource or suspending/resuming
              transactions on your own.
              If anything, it will be much clearer to the next person who maintains
              your code.
              -- Rob
              Anamitra wrote:
              > Hi All I am on WLS 6.1 sp2 on win2k. I have a requirement which is like this: I
              > use connection pools/txdatasources/JTA in my application. Now when a JTA transaction
              > (UserTransaction) is active - I want to take a connection from the pool and do
              > some operation and commit it independently of the UserTransction commit/rollback.
              >
              >
              >
              > Its pretty much like this - 3 components A , B, C (none of them are EJBs) are
              > involved in a UserTransactions and all of them access database via a TxDataSource
              > (say TD) which points to a connectionpool (say CP). Now I want B to get a connection
              > handle which is not participating in the main transaction - so that the operation
              > that B does is independent of what happens to the main transaction. Now I know
              > I can use TransactionManager api to suspend a UserTransaction and then let B take
              > a connection from the pool and commit it and then resume the transaction. But
              > is there any easier way out of it? Like if B uses a DataSource instead of a TXDataSource
              > - will that give B a connection which is not part of the main transaction? if
              > not then whats the difference between DataSource and TXDataSource? Any help is
              > appreciated.
              > thanks
              > Anamitra
              

  • Login wizard - CF9 server - "Coldfusion not is not running on the remote site" - YES it is!

    I use Dreamweaver to upkeep sites for several friends and clients. When I use the login wizzard on a server with CF8, it works fine. If I use it on a server with CF9, I can't get past the *Coldfusion not is not running on the remote site* error. Yes it is running.  I've tried connecting using FTP, RDS, directly over the network - you name it.  Same error.
    Any suggestions?
    Thanks
    Rick

    Hi Rick
    If you are trying to RDS log in to a remote server the host may have disabled this service... Most do, and should. Allowing remote RDS is a potential security risk.  Check with your host to see if this is the case.  If it is, it is always better to duplicate your host environment locally, that is be running CF9, and the database, be that MySQL, SQL Server, Access, or whatever locally and do all you development and testing there, then just upload the files when ready.
    Hope this helps.
    Lawrence Cramer - *Adobe Community Professional*
    http://www.Cartweaver.com
    Shopping Cart for Adobe Dreamweaver
    available in PHP, ColdFusion, and ASP
    Stay updated - http://blog.cartweaver.com

  • NetBeans and other software not available in the main solaris repository.

    In the main(default) Solaris 11 Express repository we cannot find NetBeans and other software we could find in OpenSolaris in the extras repository,for example.Reading Solaris 11 Express release notes I find the main solaris repository and the support(for security and bug updates) repository,no other.Do we need to download directly in the NetBeans website,OpenOffice website etc.etc.,or are there any other repositories I did not see.

    I just wrote an blog entry based on this question - http://blogs.sun.com/observatory/entry/left_behind. Bottom line, you can either download the software directly or add the opensolaris.org repository and get the IPS version.
    Regards,
    Brian

Maybe you are looking for