Moto v265 is not seen by iSync after 1 sync

Hi,
I just received my Moto v265 and I attached the USB data cable and all as worked as expected so far.
But when I synced it once, and made some changes in the parameters or in my address book/iCal events, the phone is no longer recognized from iSync. I have to unplug its USB cable, replug it, then sync again. Is it normal behavior?
Also, in iSync, if I enabled the iSync menu item and an error occurs with syncing the phone, I never received any warning. While syncing directly from iSync, the message appear. Anyway to have only the menu item and having the error messages at the same time?
Thanks

Problem is still there, but very unpredictable. Cannot find anything to resolved it...

Similar Messages

  • Ringtones not seen on IPhone after first sync to Mac

    Downloaded and worked until I synced with Itunes. Imac IntelG5 Leopard

    Give a more detailed description. First and foremost, when you plug in the iPhone to the computer and go to the ringtones section, does it show that the ringtones are checked?

  • Camera roll not seen in album after updating ios8

    Camera roll not seen in album after updating ios8

    That is intentional. The Camera Roll album is no longer show as a separate album, also My Photo Stream is no longer a separate album.  This Help document explains, where you will see the photos now.
      Get help finding your Photos in iOS 8http://support.apple.com/kb/HT6464
    Have you enabled the "Summarise Photos" option? Then disable it.
    By default, Photos displays a representative subset of your photos when you view by year or by collection.
    To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
    And did you migrate your photos from iPhoto?  Some photos may still be in the iPhoto Library, that is no longer supported:
    See: Migrating from iPhoto for iOS to Photos on iOS 8

  • Device not seen in itunes after data transfer

    I bought an original MacBookPro from my daughter & transferred all my data from PB G4 to MBP.
    Everything works just fine, except itunes does not see my ipod touch. I cannot figure out how to get it "recognized" as a device?
    Any suggestions?

    Hello.
    Try the following suggestions below
    1. Perform all Software Updates - Click on Apple logo in top left corner of the OS and choose Software Updates. It will scan the mac and then populate a list of software that needs updating including iTunes if there is any at all.
    2. Connect iPod Touch to another USB Port in the Macbook Pro, If it still does not show up, Disconnect the touch. Reboot the Mac, then reconnect the touch.
    *Link below has extensive troubleshooting steps for iPod Touch not seen in iTunes. Follow one step at a time. Post back if you need further assistance from the community.
    iPod touch not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS2050

  • IMac OSX 21.5 late 2010, had MTN Lion on it. Prob with thousands of my photos in IPhoto all mixed up and intermingled with thousands of odd images I had not seen before. After trying to erase them, too numerous, I used original disk for disk utility. Disk

    Utility had issues with erasing disk. It took 36 hours and then said it was a failure. I tried repairing and verifying and partitioning. Finally, I used the original disk to install the system. It installed Snow Leopard. I was unable to install the 2nd disk ILife items, so I repurchased those. I thought I was all set but it would not upgrade past 10.6 or something. After it is all set up, I realize there is nothing on the computer. The updates were in download folders and in reading the install logs, it said the install disc was read only and the system was installed from somewhere else and then it was reaped and something about a sandbox and it seemed important that all the Asian languages were added in, even though I unchecked that option. All these odd programs and windows are on there, which I do not use and do not want on there and do not see it on there. So, I tried this several more times, it appears someone is using the Root user. I tried to disable the root user as I do not understand how to set it. Last night, I took the main partition that I put everything on and made me the owner and took over that whole disk. Then the other two were locked, do I ejected them. Then I wanted to erase 4 things - an iDisk an some other trash and the trash is suddenly emptying 989 items, I think were the logs. So, I turned it off. What is going on? I was unable to fix the install disk. The permissions were not repairable on the partition, it was verified as being ok though. Has someone taken over my computer? How can I get rid of them and get it fixed? It has affected my iPad and my iPhone 5. I really need these devices. I am an artist and need to take and post photos of my work. Is this Chinese people doing this and are they nearby?  I did notice they wanted me to sign up for mo ole me. in the logs  it even said, no [email protected]. And no password access at that address.  So, I was also not able to update to Mountain Lion and Icloud again. at one point it looked like I had. i downloaded everything I purchased that was in Icloud to Itunes and it showed the lion in Mail but there was no cloud icon and Mountain Lion said to install, meaning it was not installed. System information confirmed this. oh, and my main disk in disk Utility is named with an unchangeable name that is the serial number of the mac and it says it is an in/out sata media drive. Please, please help me.

    1. If you break your post into paragraphs it is much easier to read.
    2. I have no idea what your post is referring to, and how - if at all - it relates to iPhoto.
    3. It's a good idea to re-read what you've posted, and ask yourself how it might look to someone who doesn't know you and doesn't know what's going on with your machine.

  • IPhone not seen in iTunes after Windows XP reinstall

    Hi
    Can anybody please help me with this, I've tried googling the problem and checking the Apple support info but no luck.
    When I plugged my iphone 3GS in, iTunes doesn't see it. (Windows recognises the device.)
    This worked up until I reinstalled Windows XP (service pack 3) onto a new hard drive, and have installed the latest version of iTunes (10.6.3.25).
    I had copied all my data from my old XP installation onto the new hard drive, including my iTunes directory (iphone sync data - apps, music) , so I just pointed iTunes at the directory and it happily loaded all my apps. Note: Version of iTunes was from 2011 - not sure if it was same, I think it was 10-something.
    Note: iphone is NOT jailbroken
    Steps I have already taken:
    - run through all the steps at support.apple.com/kb/TS1538
    - checked that my cable is ok (iphone charges and is recognised by Windows)
    - authorised my "new" computer.
    - tested my iphone - I went into a mac store and they plugged it in and it was picked up by itunes on their computer
    - disabled my virus protection while testing (AVG)
    - uninstalled and reinstalled iTunes, and rebooted my computer
    - confirmed Apple Mobile Device Support (AMDS) is installed, and restarted it
    Has anybody else seen something like this when reinstalling Windows?

    DEVICE NOT RECOGNISED IN ITUNES
    If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps.

  • IPhoto Albums not seen in iTunes after iOS 6 update

    I upgraded a 3rd gen iPad and an iPhone 4 to iOS 6, then updated my Macbook Pro (2.4 ghz quad core i7, 8GB RAM) to 10.8.2 with the requisite iPhoto update.  Now, iTunes will not show my iPad even though wireless sync is enabled, unless the iPad is connected to the laptop via the docking cable.  Both iPhone and iPad error out on synch with an error 1140 if synching photos is enabled.  Under the photo tab, the button to have "selected albums, events and faces" is grayed out.  So I can only select to sync ALL photos or none.  I believe the error 1140 is stemming from my library being too large to sync to the i-device.  In any case, I can no longer choose certain albums that were enabled under iOS 5.  The area below these options in the Photos tab in iTunes also does not show any albums, where it used to do so in a grayed out fashion even if that option was not selected.  Major issue here.  Have tried all the rebuild and repair of iPhoto library.  The kicker is that both the devices I upgraded have the exact same issue, so I'm thinking this is an update/Apple problem, not an issue with my devices or config.

    Ok, all.  I think I found the problem.  In searching for reports of this issue and solutions I found someone that mentioned they had fixed a similar issue with a "free" program called "iPhoto Library Manager."  The app apparently lets you split a library into multiple smaller ones or combine multiple libraries.  Generally it just "manages" your libraries.  I figured I had nothing to lose so I checked it out.  Turns out it costs $19.99 but they do have a free demo. 
    I launched it and it immediately told me that it couldn't display my library and albums due to an issue with the AlbumData.xml file on line 22155.  I read in the documentation of the app under it's "Help" menu that likely causes were a keyword with a "null" character at the end, or a file path being referenced inside the library that had an ampersand or backslash in it.  The person on the board I'd found had had a keyword issue.
    Anyway, I opened the iPhoto library by showing package contents (right click the file to choose this) and loaded up the AlbumData.xml file in TextWrangler, since that displays line numbers.  I found that line 22155 indeed referenced an mp3 in my iTunes library that had an ampersand in it.  Deleted that line.  Then it said line 22156 had an issue so I deleted that, at which point iPhoto Library Manager instantly displayed all my albums.  I checked iTunes and it too now showed my albums and the option to sync only selected albums was no longer grayed out!
    Per the Library Manager's instructions, I saved the AlbumData.xml file I'd modified.  The app said the iPhoto only writes this file out, it doesn't read it.  However, other apps read it to get your album info, hence the issue.  So I had to go into iPhoto and fix the problem, else the next time I exited the app, it would write the file back out improperly.  I noticed in the xml file that where the song was listed it was also referencing one of my albums.  So when I launched iPhoto, I went to that album and checked the slide show settings.  Sure enough, I had set a custom playlist for that album and listed the song I had seen on line 22155 in the AlbumData.xml file.  I removed that song from the settings, and exited iPhoto.  No more issues!  I appear to be all set!
    Now, I'm not clear if I NEEDED to edit the AlbumData.xml file.  Just looking at it showed the error and then I had to fix it in iPhoto.  So you can probably do that.  However, the iPhoto Library Manager software is the only thing I know of that could show WHERE the error was.  Since the free demo works for this purpose, I'd suggest giving it a shot.  This issue is obviously caused by our individual libraries and is not an Apple issue.  Now, the album that had the problem has existed for almost 3 years and I've never had an issue like this arise before so it's anyone's guess as to why it became a problem now.  Fortunately, it's all in the past for me now, though!
    Hope this helps someone.  Good luck!

  • Data not seen in RSA3 after setup table was filled

    HI
    We have an issue where we do not see data for Sales Orders and Deliveries in RSA3  (and hence is missing in BW).
    For sales orders we are missing 6 months' data and for Deliveries we are missing data from june to october 2007.
    We checked the sales order and delivery documents in R/3 and they exist for the above date ranges. We deleted and filled up the setup tables. But still don't see the data in RSA3.
    There were no extractor changes done.
    Any tips?
    Thanks
    Pooja

    Go to SE11 and search for setup and look for the specific data source and see the content, if the content is actually zero, then there is nothing in the setup table.
    thanks.
    Wond

  • Webservice not seen under naigator after transport

    Hello Experts
    I created a webservice using an EJB.
    For this I created 2 DCs 1 is EJB Module and other is a Web module in a single NWDI track.
    The Ear file was deployed successfully and the webservice executes perfectly in development system
    However when I moved my changes to the test system (transport using Solman ) I cannot locate the web service in the navigator.
    I checked the NWA for deployed DCs  in both the systems.
    For the EJB DC  when I check the application modules I saw 3 components EJB module, Web Module and the webservice (WEBSERVICE PORTS) in dev system where everything works fine.
    However in the test system under NWA for the DC I see only 2 components EJB module and the Web Module under application module. The component of type web service is missing.
    Am I missing something in the transports .
    What do I need to do to ensure that the web service appears in the WS navigator .
    Experts Please help.
    Regards
    Vikas

    Hi,
    can you please tell me the version of your engine?
    I remember a known issue from the past. The phenomenon was that the webservices were not appearing in the /wsnavigator, and the problem could be resolved using a fix:
    #1395019 u2013 Reverse proxy support of Java Web service framework
    (http://service.sap.com/sap/support/notes/1395019)
    Best Regards,
    Ervin

  • Airprinter not seen on iPad after software up date

    I just installed IOS 6.1.3 on my ipad and it no longer sees my air printer an HP photsmart B110, which worked just fine before. Anyone have any suggestions.....I have done all the normal stuff power on/of etc ...on iPad and printer....

    The 8110 does not show up on the list of currently supported AirPrint printers.
    See: AirPrint basics
    So there are probably other utilities you can use to print with, but not AirPrint.

  • Is there a way to confirm iPad Notes are backed up after a sync?

    I'm skeptical that everything on my iPad is backed up to my new MacBook Air because I have been getting that stupid common error message ever since I first connected the two, about iPad being synced to another iTunes library already and if I want to erase iPad and replace with current iTunes. I did have it synced to a Windows laptop before which no longer works.
    I did a "Find" search on MacBook for "iPad" and "Notes" but nothing coming up. I thought for sure there was a folder I found on my old laptop that showed names of things backed up from iPad, maybe not though. I have v4.3.3 on iPad and want to get 4.3.5 but not until I know it's is all backed up, I have a lot of info in Notes that I don't want to lose.
    I did get apps and photos to transfer over to the new MacBook in two separate syncs by themselves, then was able to do what appeared to be a complete sync. The weird thing is it goes through motions of syncing and appears everything was backed up, and that summary of everything (except Notes specifically) appears in Macbook iTunes when the iPad is plugged in. But, I still get that same error message every time I plug the two together, so it's confusing.
    Thanks

    I'm not sure that the content of a backup is readable - I did try looking for a word that I know is in one of my notes yesterday and couldn't find it in the backup folder even though Notes should be backed up (http://support.apple.com/kb/HT4079). The location of the backup is :
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    None of my notes have been lost on any updates that I've done on my iPad, but if there are any that you definitely can't lose then you should probably copy/email them to yourself just to be on the safe side.

  • My ipod touch 4g is not showing my songs after it syncs w/itunes

    hi there,
    i have an ipod touch 4g as a gift recently. i downloaded the newest version of itunes from the internet. i transferred my songs from my computer to itunes music library. when i sync-ed my ipod touch to my itunes library, it doesn't show Any of my songs that i have in my itunes music library. None of my songs are listed on my ipod touch under "music," whether it be "recently added" or any of the other categories.
    also, when i sync-ed, it gave me an error message that few of the songs cannot be sync-ed because the lyrics are not available or something like that. i don't think i did anything wrong when i sync-ed. the computer recognized my ipod touch when i connected it to the usb port of my computer n it opened up the itunes window n sync-ed right away as well. but, for some reason, my ipod touch still doesn't have any of my songs that i have in my itunes library.
    can someone pls tell me what i need to do or what have i not done yet? please help...desperately seeking help for my ipod touch to be able to download/sync my songs as it shows on my itunes music library.
    any help is greatly appreciated. looking forward to anyone's help. thank you sooo much.

    hi kobito,
    thanks for your reply but i don't understand what u mean by zone alarm? where would that be on my computer? also, i tried changing the language but the music is still not there at all. last but not least, what is the purpose of having my antivirus software disabled prior to syncing? i didn't understand that question.
    till now i still haven't been able to get my music on my ipod touch. this is really frustrating and upsetting. all i get is my podcast and that is it; no music/songs whatsoever...:-(
    pls help if u can give me more details how to do it the right way. thanks again for your help.

  • Ipod 6th gen not showing any music after successful sync

    Hi all,
    My ipod 6th gen has just started doing something odd.
    When I plugged it in it said it couldnt be read and I had to restore it.
    I did this, but now when I sync'd all my music back to the ipod, it seems to work, but when I unplug the nano and try to play some music there is nothing available to play.
    Any ideas?
    I have the latest version of itunes, and the ios on the iPod is up to date.
    The Sync seems to work, and in itunes you can see that there is music on the ipod. But the ipod itself shows nothing available to be played.
    Pls help!!!!!

    Same problem as here: https://discussions.apple.com/message/19099083#19099083

  • After upgrading to Mountain lion the hyperlink button is not seen in Preview.  Anyone knows ho to get it back?

    After upgrading to Mountain lion the hyperlink button is not seen in Preview.  Anyone knows ho to get it back?

    Augend wrote:
    After upgrading to Mountain lion the hyperlink button is not seen in Preview.  Anyone knows ho to get it back?
    There have been a few threads about this.  The feature seems to have gone missing in Mountain Lion even though the Help for Preview still mentions it.
    I've filed a bug report on it.
    Matt

  • BB Passport: After upgrading to 10.3.1, the USB key are not seen by the OS

    Blackberry Passport:
    After upgrading to 10.3.1 Any kind of USB key is not seen by the OS, even after restarting the operating system.
    With original OS 10.3 could connect USB key to transfer my photos with file manager.
    Any suggestions?

    There a lot of issues being discovered by users doing the upgrade OTA or using Link. And they are varied. It's had to say whether your problem another of these issues or something else. Those I trust are recommending a clean OS install using an autoloader as so far there are not the same problems afterward.
    You could try the autoloader route. Do a backup first. After the clean OS install, test before you do a restore and install app. If problem is gone, then you know the clean OS works. The next question will be if the problem returns when you restore or add apps.
    - Ira

Maybe you are looking for