Motorola file system access
hi,
I wrote a Midlet to access image files on my motorola v3x.I also checked it by Device Emulator .It is working fine.But when i installed in my phone it is not worked.So,if any body worked on this please help me.
sorry for my bad english.thanks in advance
We have to start it from begining ..
Does the device supports full implementation of JSR75. MOTO devices dont support complete implementations. like RAZRv3 i claims to support JSR75 but doesnt supports complete implementation.
A. Check Call to System.getProperty with key microedition.io.file.FileConnection.version
should return the implementation version number starting with 1.0
B.Files read/write permissions should be supported by the device�s native system:
� javax.microedition.io.Connector.file.read - should enable reading from the file
system (hereinafter just �read permission�).
� javax.microedition.io.Connector.file.write - should enable writing to the file
system (hereinafter just �write permission�).
If A and B are true ..u can start with below points.
If it supports the complete implementation, then
1. is it able to install properly.
2. Have u specified permissions in the JAD file for the same?
3. at what stage is it not working, when the file write code is being executed ??
Message was edited by:
aeran1
Similar Messages
-
SAP File System Access - SLD Naming Convention/Suggestions
I would like to access our ECC file system to pick up files we will use to create Idocs.
I'm wondering the best way to describe the file system access in the SLD.
I have a business system for the main client on the ECC system (BS_ED1CLNT010) for example but the OS isn't client specific. I could use this as the Business System in the scenario and define a file adapter that connects to the unix server.
Any thoughts?Maybe I didn't frame my question properly.
In the ECC system we have multiple clients (20,30,40, etc). If I am going to post an Idoc to a client in this system I need to define each as a business system in the SLD and import this to the Integration Directory. So I would have BS_XXXCLNT010, BS_XXXCLNT020, etc, one for each client. These all share the same Technical System. If I want to post an Idoc to a client on the ECC system I have to define a Business System and interface to that and every client that will receive an Idoc. (as well as the ALE settings on the ECC)
Each of these reside on the same SAP server (sap00001 for example) and there is a directory (/public for example) on this server. This isn't client specific.
I wish to pick up a file from the ECC file system and post a client on the ECC system (maybe different ones based on the data in the file).
I don't want to define the file adapter under BS_XXXCLNT020 since it isn't specifc to client 020 although that would work.
Do I create a new TS in the SLD as third party, stand alone java, and a BS for that? TS_XXX_FILESYSTE (3rd party). BS_XXX_FILESYSTEM for the TS?
I'm really looking for clarity in the definition of the SLD. -
Direct File System access problems from JAWS application
Hello,
I have built a Web Start application that consists of a Webserver (Jetty) ,
a WAR file and a Java (main) class that deploys the web application on
the server and starts the server. It all works fine, apart from the fact
that I am getting java.security.AccessControlExceptions when I try to
access the local filesystem or system variables like the java.io.tmpdir.
I have signed all the jar files and I included the<security> <allpermissions />
</security> tag in the jnlp file. Still, I can't seem to get out
of the sandbox.
I have read in this article (http://mindprod.com/jgloss/javawebstart.html)
that direct file system access from a Web Start application is impossible
(Quote: "There is still no way for even a signed JAWS app to
find some persistent disk space in an easy way. It pretty well
has to ask the user for the name of some directory to use.")
Is this true?
Thank you,
PeterHi Guys,
I found a way to access the local filesystem...
Besides signing all the jar files and including the<security><allpermissions /></security> tag in the jnlp file I have to include this line in the code I execute on the client machine:
System.setSecurityManager(null);
Regards,
Peter -
I am doing a software based on Flash , to provide my customer to edit pictures online.
In some scenario, to get Full Acess Local File is necessary. I find SliverLight 5.0 had supported such features:
Unrestricted File System Access in Full Trust
Full Trust in-browser for enterprise scenarios
Default Filename in SaveFileDialog and OpenFileDialog
I really desire those features , so , I am wondering whether adobe will support it .If will, when?Please read the below flash player administrator guide
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_11_7_admin_guide.pdf
check the section "The User FlashPlayerTrust directory". It will help. -
Hi ODI discussion folks,
I have a couple of questions from an Oracle partner that I'm trying to find a definitive answer for if possible. The partner is setting up ODI 10.1.3.4.0 for a customer who insists that the absolute minimum amount of access to the file system is granted due to corporate security policies.
I have checked the bundled ODI documentation but couldn't really find anything about file system permissions needed to run the ODI client. I was pointed towards the "Setting Up Security for an Integration Project — What to Consider" document but this does not mention a great deal about how much access to the file system is needed for the ODI client to function.
What the partner is asking is the following:
"1. What are the minimum file/folder permissions needed for the ODI client installation? I'm installing at xxxxx
and their machines have to be locked down as much as possible.
2. Say you have 3 users all wanting to run integrations etc and the Master and Work
repositories have been set up. An admin installs the ODI client but doesn't
create the connection to the Master repository. What are the minimum
file/folder permissions required on the client machine to:
a) create the connection to the repository
b) run any subsequent integrations?"
If anyone can advise on this then that would be much appreciated.
Regards
Craig Huggans
Oracle Hyperion Support
Message was edited by:
user648991Hi Craig,
How are you?
Let me try to contribute a little....
1) The minimum requirement is for its own installation directory, there is no reason to have access to other directories unless if it is necessary to read files from some other directory at the client
2) Again only to its own install directory. The connection setting is recorded at \bin install directory. After that, all information are recorded at repository, there is no client work.
Be free to contact me by email or phone if you have any new doubt. You can get my email from my profile.
Does it respond your doubts?
Cezar Santos -
Ext3fs file system access on Sparc SCSI disk
We've got a requirement to read data from a SCSI disk with an ext3fs file system which will be connected to a SunBlade system. Write capability would be a bonus.
We've found some old (and not working) implementations to allow Solaris to mount and read ext2, but these don't work on Sparc. Things like LTools won't work either, since Solaris won't allow access to a SCSI disk that doesn't have a Solaris label on it.
Does anyone know of any possible solutions to this problem? Any one know of ext3fs for Solaris? Any one know how to access an internal SCSI disk on Sparc that doesn't have a Solaris label on it?
Thanks
EdHmmmmmm........Thanks for the suggestions - have written a test and the results arent good.
Using file filter to "find" the file is just too slow (1.4 secs and i need to do this 4million times for my application).
So I understand why the filter is slow compared to directly naming the file as we have to accept/reject them all, whereas if we know the file we can go straight to it. But this is a nightmare for my app. Looks like Im going to have to think again....
public static void main(String[] args) throws Exception {
String dir = "/path/files";
File dirf = new File(dir);
long l = System.currentTimeMillis();
File f1 = new File(dirf,"TheRealFile.3253.ser"); // The file in the 30,000 we want
InputStream i = new FileInputStream(f1);
System.err.println("--> "+i.read());
i.close();
System.err.println("Took: "+(System.currentTimeMillis()-l)+" ms");
// Test 2
FileFilter ffx = new FileFilter() {
public boolean accept(File s) {
return s.isFile() &&
s.getName().startsWith("TheRealFile")
&& s.getName().endsWith(".ser");
l = System.currentTimeMillis();
File [] f2 = dirf.listFiles(ffx);
//System.err.println("Found: "+f2[0]);
InputStream i2 = new FileInputStream(f2[0]);
System.err.println("--> "+i2.read());
i2.close();
System.err.println("Took: "+(System.currentTimeMillis()-l)+" ms");
--> 172
Took: 0 ms
--> 172
Took: 1482 ms -
Disallow for file system access
Hi All,
I would like to not permit to access to file system, how can i do that with permission object. I saw only examples how to set contraints on location where it can access.
RegardsI'm sorry but i dont understand the problem. (Maybe someone else will)
So you have told me that when you pass null to an file permission object, that you find out the mask is "NONE"?
You want to stop users accessing some files?
You need to build code that will stop the user accessing certain files
You want to know if you can put restrictions on the whole VM(What is VM?) or just the context?
I believe this Link could be helpful for you. -
Files system - access problem (JSR 75)
Hi All
My cell phone is Nokia 6288, I'm from Israel.
The phone should support JSR 75 (FileConnection and PIM API), and I get it without it.
Probably, my Cell operator decided to remove the built-in support for JSR-75 (which suppose to be there).
I wonder how can I add or restore the java thing for JSR-75 (if is it possible).
or if there is someway to get it back because
I know that Nokia 6288 should include the JSR 75 support.
How can I be sure that it have be removed?
Because many application which need this JSR 75 support
couldn't find files and not work because of that.
Thanks,
Adi25-Jul-2008 10:33 AM
burekas wrote:
I know there is maybe a special burning which should get it back.
It is not permitted to discuss such operations on this forum.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
Search event logs for file system access
I'm looking to create a script that will allow me to search Windows 2012 security event logs for access to specific folders. Ideally it would allow the granularity to search for read access events (4663) and specify specific users to view. One
example would be to show events for drive F:\ where the folder name is JSmith (including subfolders) and the username is not JSmith.
I've tried something like this, but can't see how to filter.
Get-EventLog security | ? {$_.Message.contains("F:\JSmith")}Is the match explicit? How can I use wildcard? How can I exclude events?
I recommend asking a search engine and doing some initial research. Here's a starter:
https://technet.microsoft.com/en-us/library/hh849682.aspx
http://blogs.msdn.com/b/powershell/archive/2009/06/11/windows-event-log-in-powershell-part-ii.aspx
http://blogs.technet.com/b/ashleymcglone/archive/2013/08/28/powershell-get-winevent-xml-madness-getting-details-from-event-logs.aspx
http://blogs.technet.com/b/heyscriptingguy/archive/2011/01/24/use-powershell-cmdlet-to-filter-event-log-for-easy-parsing.aspx
https://richardspowershellblog.wordpress.com/2009/03/08/get-winevent/
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing) -
How to access file system in kernel?
hi
i need to access disk file system in kernel.
is it possible using UFS data structure and function in
other modules in kernel?
or i need to create file system access function based on DDI/DKI?Short answer is "you cannot".
The longer one is "see topics in this forum" - there was an exhaustive discussion about this issue...
The thead "File I/O from withing a driver" in Driver Development forum may be of particular interest.
Hope this helps,
Ilya. -
Problem with File System Repository after release change
Hello,
we have been changing the Portal release from EP 6.0 to SAP NetWeaver Portal 7.0 SP17. The OS of the host is Windows 2003 Server.
If I open the component monitor to watch the repostitories, the state of the file system repositories are red and a error message occurred:
Startup Error: getting mapped math - Logon failure: unknown user name or bad password
I checked the logon credentials....they are ok. Also I checked the access from the Portalhost to the Windows File System....it´s ok too.
In our previous portal release the FSR were ok!!
Is there a difference between the file system repository configuration in portal 6.0 and portal 7.0?
Thanks and regards
TomHello Hussain,
I have checked the username and the password of the user who have full access on the Windows file system, but the same error occurred. In the Network Path we have configured a domain user for the file system access. Here is the configuration of the network path:
Name: Test
Description: Test
Networkpath:
Host\share
Password: ****
Re-enter Password: ****
User: domain\user
Here the configuration of the repository:
Name: Test
Description: Test
Prefix: /Test
Lookup Mode: caseless
Root Directory:
Host\share
Repository Services: Nothing
Property Search Manager: com.sapportals.wcm.repository.manager.generic.search.SimpleManagerSearchManager
Security Manager: AclSecurityManager
ACL Manager Cache: ca_cm_rep_acl
Windows Landscape System: Microsoft_Windows_KM
Read only: unchecked
Could it be that I need a user mapping for the access of the windows file system?
Perhaps the configuration of the Windows Landscape System is wrong?
regards
Tom -
Help Library on Aix file system
Dear Experts,
Users in my company are using SAP GUI for windows as a front end tool to access the SAP Application
My Application is runinig on AIX, I was configuerd the Help files on windows machine " i shared directory on this machine for every one , i put the help files there, from SR13 i put the path ,and it was working fine"
but now i want to move this HELP directory to the AIX file system, i don't know how to make this file system accessed by the SAPGUI
Could you please help me on how can i use one file system on AIX as shared folder containig the HELP files and can be accessed by the windows SAPGUI?
Thanks
SherifHello Sherif,
Please go to transaction FILE. There you will file an entry for NETSCAPE_PATH. This is the path you need to give in SR13. Actually this is a logical path which has to be mapped with the physical file path which will be nothing but the location of your online help files. The mapping will be done in FILE itself.
Next you need to make settings in SR13 and give this path.
Addtionally check :
http://www.jt77.com/human2/resources-13782.html
Also the OSS note 101481
Regards.
Ruchit. -
How do I copy transport files SAP_ALL access but no RFC.
Hi All:
<u>Background:</u>
I have two window servers. They are on two different transport domains. I have SAP_ALL access to both and File system access to one, lets call it DV1. I also have remote desktop access to DV1.
DV2 (seperate transport domain) can ping the first server but not establish an RFC connection (router restrictions: Unchangeable!). No OS level access to this machine.
<b>I need to move a complete package (called ZHR1) from DV2 to DV1.</b>
Is there a way to do this?
Thanks
<b>T.M</b>Hi Tony,
As I understand it, you've created a transport in DV2 containing the complete package ZHR1. You've released the transport in DV2 which has created a data and cofile in the transport directory of the server hosting SAP system DV2.
First question. What Basis release is system DV2? You may have the opportunity to download the data and cofile from the transport directory using AL11 to your workstation. After that, you can store the downloaded DV2 data and cofile in the transport directory on the server hosting SAP system DV1 (where you say you have O/S level access), with the correct file permissions.
Once you have stored the DV2 data and cofile in DV1's transport directory, you can import it in the normal way.
Gary -
Disappointed - Where did the file system go ?
Am I just missing the obvious ? My old HTC TouchPro 2 had an accessible and complete Windows 6.5 file system - Documents, Music, etc. Has that file system access been disabled on these Tropy's ? I have PDF fioles (maps, etc) and other files from the old phone that I want to use. Am I going to reactivate my TouchPro 2 - or is there a way to get to the file system on the Trophys ? Looks like Verizon needs to get more serious about Windows power users (read: BUSINESS clients) - TouchPro's were good but there is no meaningful replacement. Any advice ?
chw wrote:
Am I just missing the obvious ? My old HTC TouchPro 2 had an accessible and complete Windows 6.5 file system - Documents, Music, etc. Has that file system access been disabled on these Tropy's ? I have PDF fioles (maps, etc) and other files from the old phone that I want to use. Am I going to reactivate my TouchPro 2 - or is there a way to get to the file system on the Trophys ? Looks like Verizon needs to get more serious about Windows power users (read: BUSINESS clients) - TouchPro's were good but there is no meaningful replacement. Any advice ?
There is no file system. One way you can get PDFs from the old phone to the new phone is to send the PDFs by email to yourself again. Another way is you could access your SkyDrive (skydrive.live.com) and upload the PDF's there (you'd then go into the Office app and move to the 'locations' pivot. In either case, once you open the file in the Adobe Reader app, the PDFs will be stored on the phone until you delete the file yourself. I don't know what other file types you're trying to access, but I have yet to find a file type that won't open (Excel, Powerpoint, Word, TXT files work, MP3, WMA should work, ZIP files will redirect to Internet Explorer but they will be opened).
As far as Windows power users, that wouldn't be on Verizon, that would be Microsoft, and probably chances are it won't change. -
How to get access to the local file system when running with Web Start
I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).
Maybe you are looking for
-
How do you sync an iphone to a new computer without losing ANYTHING?
I know this sort of topic has been discussed a bit and I have searched quite extensively but I would REALLY appreciate any of you gurus out there to give this a quick read. I don't like to thread hijack and I never got all my concerns addressed from
-
Having Problem in access to Source Code Control System (URGENT help needed)
I am using JDeveloper 9i first time. The repository is in Oracle 8i. I have established a connection from JDeveloper 9i to Oracle 8i repository running on Sun Solaris. We have created a shared area and my colleague have checked-in some files. I have
-
Problems with organizing photos in IPhoto
I am organizing my Iphoto in preparation to move the albums to an external hard drive to make space on my laptop. I just finished deleting and re-arranging around 90 albums with 11,000 plus photos. I then realized that when I was deleting them out of
-
Sync pictures to iphone???
When I sync my picture folders to iphone, they come out distorted.....Do I need to resize the pictures or something??? HP Windows Vista
-
i am trying to edit the Negril Sweep for a slower build up so i can use it in making dubstep tracks. the window of the sound generator extends down below the dock and therefore i can't edit the last two things, sustain and release. how do i fix this?