Motorola headset and D-link garble
I hav ejust set up my motorola headset with my D-link DBT20 ( i think thats it) When i use Skype my voice and the other voice become garbled. Why is that and how do i fix it??? thanks
Using a headset needs several steps even needed if you have the latest computer or Mac OS X release. Please make sure to follow them in order.
Download the Apple Bluetooth Firmware Updater
Install it
Launch it from Applications > Utilities > Bluetooth Updater
Apply it to your adapter (takes very long).
Start the Apple Bluetooth Assistant and select Headset. Do not use anything else!
Make your headset Bluetooth visible. Look up the manual of your headset how to do that.
Now select the headset in System Preferences > Sound.
In most cases step 3 is missed. You have to start the installed updater yourself (do not ask me why).
Similar Messages
-
Bluetooth Headsets and D-Link DBT-120
Hi everyone,
I am running a PowerMac Dual 2.0 GHz G5 with OS 10.4.11. I have been having the hardest time finding a solution to pair my Plantronics headset with my Mac. I have tried several Bluetooth USB dongles, most recently the D-link DBT-120 and everytime I go to pair the headset, I get the error: "Failed to set up the headset. Headsets are not supported on your Bluetooth hardware." I have the most up to date bluetooth firmware and software on my Mac:
Software: 1.9.5f4
Firmware: 3.1915
I read in the support article:
http://docs.info.apple.com/article.html?artnum=120276
"Headset support requires a Bluetooth enabled headset and either an internal Apple Bluetooth module or a D-Link DBT-120 rev. B or later."
so I understand why the 2 other cheap USB bluetooth dongles didn't work with headsets, but even after buying a new D-link dbt-120, I STILL get the error...any thoughts??? Thanks in advance!Your link loops back to this thread.
So, what you are saying is, the Apple doc recommends this DBT-120:
http://eshop.macsales.com/item/D%2DLink/DBT120/
But you have this one:
http://www.dlink.com/products/?pid=34
is there a solution without upgrading to 10.5?
OS X 10.4.3 and later are supported, but note the disclaimer:
This device supports Bluetooth® Version 2.0. However D-Link cannot guarantee full compatibility with all devices due to modifications and/or other variations of the devices’ implementation of the Bluetooth 2.0/1.2/1.1 standard. -
Any hope for headset and D-Link DWB-120M?
Here I am again, getting left behind while technology advances without me.
I've got a D-Link DWB-120M bluetooth adaptor which used to work fine with my iBook. But I bought a jabra headset yesterday, hoping to use it with Skype. Following instructions on these boards, I tried to update the btooth firmware, but it wouldn't do it, didn't seem to recognise the adaptor at all. Then I tried pairing the headset with the iBook anyway, but "headsets not recognised", or something like that.
So, is there any chance of updating my bluetooth system, whether on the adaptor (which d-link have now stopped doing tech support for) or by downloading some other update? Or do I have to give in and buy another adaptor, since the DBT-120 is the only one that seems to work?
Cheers,
SuzUsing a headset needs several steps even needed if you have the latest computer or Mac OS X release. Please make sure to follow them in order.
Download the Apple Bluetooth Firmware Updater
Install it
Launch it from Applications > Utilities > Bluetooth Updater
Apply it to your adapter (takes very long).
Start the Apple Bluetooth Assistant and select Headset. Do not use anything else!
Make your headset Bluetooth visible. Look up the manual of your headset how to do that.
Now select the headset in System Preferences > Sound.
In most cases step 3 is missed. You have to start the installed updater yourself (do not ask me why). -
HDX 16 Headset and Mic problem in Vista64
Good afternoon,
I have a long-standing problem with my e-dimensional AudioFX headset and my HP HDX 16, vista64 laptop. The issue is:
I cannot hear myself speak into the mic from my headset. ie. no sound is being sent from the mic back into the headset or external speakers. Everything else works just fine. My ventrilo partners can hear me and I can hear them. I just cannot hear myself.
When I plug the headset into my older Windows XP Pro machine, it works perfectly. I hear all ambient sound from the mic in my headset.
This is really difficult to work this way. I have tried disabling the AndreaElectronics microphone enhancements but this has not worked. I have tried adjusting the recording and playback properties many many times and many different ways but still can't get ambient sounds to feed back into the headset. I am reluctant to fool around with the IDT Audio drivers/services.
Can anyone offer some guidance/troubleshooting help? I'm totally out of ideas now.
Regards,
StarsiderUpdate:
I think I have found the solution but it was for a similar problem on a Dell machine. Here is the link to that forum:
http://forums.techarena.in/vista-hardware-devices/865259.htm
I think the solution involves enabling mic monitoring in the registry but I don't know exactly how to do it. If there are any registry experts reading this, I would greatly appreciate your help. I am reluctant to make any registry changes per the instructions in the link above since that was for a Dell computer and my registry is slightly different from the instructions given.
My exact model is the HP HDX 16 running Vista Home Premium 64-bit. Model number X-16 1155CA.
Regards,
Starsider -
Just done a clean install Win7.
I have 5. speakers and it appears that the computer is treating the headset as if they were external speakers. So the front speakers play but the back speakers are the headset.
I have Xtreme Music, any help would be greatE So, no one has any ideas on this eh? Basically I guess what i need to do is set-up or trick the card into thinking I have 2 sets of speakers plugged in. Two sets of speakers that need to play the exact same thing. Only difference is that one is headphones/mic and one is desktop speakers. This worked perfectly fine with the crappy onboard sound, it cant be impossible on this card. If I have to maybe I'll look into a spliter of some sort that can have both my headset and desktop speakers plug into the spliter, then the spliter into the sound card... but thats gonna cost me MORE money for something I should be able to do already, but am just not able to figure out how. Any ideas? Anyone? Even a link for me to read somethin else or whatever, anything.... plz
-
MSI India Free Steelseries Siberia Headset and Kinzu Mouse Giveaways
MSI FREE giveaways sharing!
To post, share, and let Indian gamers know that MSI is back and offering the best bundling of Steelseries headset and mouse as an initial campaign at Flipkart (http://www.flipkart.com/msi).
Please help to repost to inform gamers of this special day.
To repost: LIKE and SHARE the link below
(https://www.facebook.com/MsiIndiaClub)This is NOT giveaway..You will need to purchase a gaming laptop to get those..
-
Why text and button links on a PDF do not work in the iPad
I have Acrobat Pro 9.2.3 and InDesign CS5.
I've tried creating both button and text links directly from InDesign (Window > Interactive > Hyperlinks). I then export the multi-page PDF with "Acrobat 6 and Above" selected as well as the "Hyperlinks" and "Interactive Elements" checked. When I open the PDF in my iPad, none of the text or button links work.
Then . . .
I tried opening the same multi-page PDF in Acrobat Pro, and manually created the link boxes (Tools > Advanced Editing > Link Tool). The iPad still can't interprete these two interactive elements.
Any clues what I'm doing wrong?Try exporting as ePub - now test inside Digital Editions and if OK - drag the file into iTunes and synch to iPhone/iPad.
It's probably a Preview issue as mentioned but exporting to ePub is good fun!
J. -
How to display URL images and URL link (html) from Smartforms?
Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
lc_true(1) VALUE 'X',
lw_control_parameters TYPE ssfctrlop,
lw_output_options TYPE ssfcompop,
lc_graphics(8) VALUE 'GRAPHICS',
lw_xsfparam_line TYPE ssfxsfp,
lc_extract(7) VALUE 'EXTRACT',
lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
lc_mygraphics(11) VALUE 'mygraphics/',
lc_content_id(10) VALUE 'CONTENT-ID',
lc_enable(6) VALUE 'ENABLE',
lw_job_output_info TYPE ssfcrescl,
lw_html_data TYPE trfresult,
lw_graphics TYPE ssf_xsf_gr,
lt_graphics TYPE tsf_xsf_gr,
lv_html_xstr TYPE xstring,
lw_html_raw LIKE LINE OF lw_html_data-content,
lv_incode TYPE tcp00-cpcodepage VALUE '4110',
lv_html_str TYPE string,
lv_html_len TYPE i,
lc_utf8(5) VALUE 'utf-8',
lc_latin1(6) VALUE 'latin1',
lv_offset TYPE i,
lv_length TYPE i,
lv_diff TYPE i,
lt_soli TYPE soli_tab,
lw_soli TYPE soli,
lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
lv_name TYPE mime_text VALUE 'sapwebform.htm',
lv_xstr TYPE xstring,
lw_raw TYPE bapiconten,
lt_solix TYPE solix_tab,
lw_solix TYPE solix,
lv_filename TYPE string,
lv_content_id TYPE string,
lv_content_type TYPE w3conttype,
lv_obj_len TYPE so_obj_len,
lv_bmp TYPE so_fileext VALUE 'BMP',
lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
lc_doc_bcs TYPE REF TO cl_document_bcs,
lc_bcs TYPE REF TO cl_bcs,
lc_send_exception TYPE REF TO cx_root,
lw_adsmtp TYPE lty_adsmtp,
lv_mail_address TYPE ad_smtpadr,
lc_recipient TYPE REF TO if_recipient_bcs,
lc_send_request TYPE REF TO cl_bcs,
lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = v_form_name
IMPORTING
fm_name = v_namef
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc = 0.
break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = v_language
i_application = 'SAPDEFAULT'
IMPORTING
e_devtype = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
break mhusin.
ENDIF.
Set output options
lw_output_options-xsf = lc_true.
lw_output_options-xsfcmode = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
EXPORTING
control_parameters = lw_control_parameters
output_options = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
job_output_info = lw_job_output_info
TABLES
tt_tabh = tt_tabh
tt_tabb = tt_tabb
tt_tabf = tt_tabf
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
inbuff = lv_html_xstr
incode = lv_incode
csubst = lc_true
substc_space = lc_true
IMPORTING
outbuff = lv_html_str
outused = lv_html_len
EXCEPTIONS
OTHERS = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
EXPORTING
object_id = 'ZWN'
object_url = 'ZWN.GIF'
EXCEPTIONS
OTHERS = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
lv_diff = lv_html_len - lv_offset.
IF lv_diff > lv_length.
lw_soli-line = lv_html_str+lv_offset(lv_length).
ELSE.
lw_soli-line = lv_html_str+lv_offset(lv_diff).
ENDIF.
APPEND lw_soli TO lt_soli.
ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
EXPORTING
content = lt_soli
filename = lv_name
description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
CLEAR lv_xstr.
LOOP AT lw_graphics-content INTO lw_raw.
CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
ENDLOOP.
lv_xstr = lv_xstr(lw_graphics-length).
lv_offset = 0.
lv_length = 255.
CLEAR lt_solix[].
WHILE lv_offset < lw_graphics-length.
lv_diff = lw_graphics-length - lv_offset.
IF lv_diff > lv_length.
lw_solix-line = lv_xstr+lv_offset(lv_length).
ELSE.
lw_solix-line = lv_xstr+lv_offset(lv_diff).
ENDIF.
APPEND lw_solix TO lt_solix.
ADD lv_length TO lv_offset.
ENDWHILE.
CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
lv_content_type = lw_graphics-httptype.
lv_obj_len = lw_graphics-length.
*Add images to the email
CALL METHOD lc_mime_helper->add_binary_part
EXPORTING
content = lt_solix
filename = lv_filename
extension = lv_bmp
description = lv_description
content_type = lv_content_type
length = lv_obj_len
content_id = lv_content_id.
ENDLOOP.
TRY.
lv_subject = lv_subject.
lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
i_subject = lv_subject
i_multirel_service = lc_mime_helper ).
CATCH cx_document_bcs INTO lc_send_exception.
CATCH cx_bcom_mime INTO lc_send_exception.
CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
lc_bcs = cl_bcs=>create_persistent( ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
lc_bcs->set_document( i_document = lc_doc_bcs ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
lc_recipient = cl_cam_address_bcs=>create_internet_address(
i_address_string = lv_mail_address ).
CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
lc_bcs->add_recipient( i_recipient = lc_recipient ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
lc_bcs->send( ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM. "call_smartforms
End Code --->
Thanks and Regards.1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead -
I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get my music and don't even see available downloads in the iTunes Store
Check this link, http://www.apple.com/support/itunes/ and go to the contact page.
Sorry, here you go https://ssl.apple.com/emea/support/itunes/contact.html
Message was edited by: ChrisJ4203 -
I'm using FF 34.0.5 (I like it). I use to be able to right click on a link, within an e-mail, and the link would open in a new tab. Now when I click on the link it opens in the same tab replacing my e-mail.
Example - a friend sends me an e-mail containing a link to a web site he thinks I'd like. I click on the link and go to the web site and then go back to the e-mail tab and reply to him. Now, when clicking that link, my e-mail disappears and is replaced by the new site.
How can I fix this? When this happened once before I was told to change the 'value' for a specific 'preference name' through the about:config page.
Can anyone help jog my memory?
Thanks!Is this about clicking a link in an external program?
You can check this pref on the about:config page for external links.
* browser.link.open_newwindow.override.external (-1)
If this pref has the default value -1 then browser.link.open_newwindow is used.
* http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config -
Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
How to remove connect and workbook link after pressing Save as,Print,Export
I have to remove the connect link and workbook link which appear AFTER pressing Save as,Printable Page,Export in a discoverer viewer report. I had already removed the link in the report itself with changing the uix files, but after pushing the link for export, save as or print the link Connect and Workbook still appear.
I know that I have to change something in UIX Files, but which one and what I have to change...? Have anyone an idea? Thanx for fast reply, it´s a urgent problem.
in addition: In metalink,otn and google were no solution...If the tone really is a single (or at least narrow band) frequency like the picture shows, I'd try the Notch Filter on the Audition/Effects/Filter and EQ menu. It might take some playing around to get the exact frequency and tweak the amount of cut you apply vs. the effect it will have on surrounding frequencies--but if you can get the right balance, you can then easily apply this to the whole of every file.
Sorry, can't help on the Premiere Pro question since I only use Audition. -
When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.
Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.
-
Can't find the storage and backup link to start an icloud backup
Why is it that when you create an icloud account the Storage and Backup link isn't always there. I need to create an icloud account and then create an icloud backup right away so that I can setup multiple ipads using the icloud backup. How do I force an icloud backup?
ThanksYou can check your Junk/Spam folders, sometimes the e-mail gets sent there. Also, double check that the primary e-mail address in your Apple ID account is hers. If none of this works, I suggest to wait it out, sometimes it can take up to 24 hours!
-
How do I include Facebook and website links on my feedback form?
Hi;
You can insert a link into your form using the "link" feature, there is a link button on the toolbar to insert a link:
If however you are asking about the "Social", "Like" buttons like many web sites have - that is not something FormsCentral includes/supports, but you can use the "Link" feature above for adding links of your own.
Thanks,
Josh
Maybe you are looking for
-
I have tried to update the Adobe Acrobat Reader DC, along with the plug-in in Firefox v37.0.1. Repeatedly, after the download/installation is "complete", upon opening Firefox I'm met with the message that the "Adobe Acrobat plug-in" is "out of date".
-
I have been having the problem with my 20" alu imac that when I resume from standby in vista that it hangs for about 5-10 seconds before I can enter my password. I do have hybrid sleep disabled, so that isn't the problem. Does anyone have any suggest
-
MacBook Pro won't turn on properly.
It beeps three times repeatedly and continues until shut down. Restart and it just beeps again. Running Mountain Lion (10.8). Screen doesn't light up. Was working fine last night. Fully charged. This has continued since I tried to start up today. Tri
-
I installed update to Mozilla 25 using Premium Installer. Is this what is used for the install?
I was prompted to update to Mozilla 25. When I did the install, it was done using Premium Installed. Mozilla was not mentioned any where. Was this install correct or did I infect my machine with bogus software?
-
How to sync an Album from Photoshop Elements 9 to an IPad?
I have editd lots of pictures in Photoshop Elements 9 and put them into an album in a particular order. Is there a way to sync the album from Photoshop to an IPad without losing the sequence in which I have arranged the photos? So far they come up in