Motorola L7 Bluetooth DUN

Hello. I am having trouble setting up my L7 to use as a bluetooth modem. Do I need a data plan if I am only using my L7 as a dial up modem to connect? When I try to connect, I get "A Modem Error has occured".

Chuck,
Generally, one does need a data plan in order to use DUN networking. I can't offer more than this, because you don't even mention who your carrier is.
Scott

Similar Messages

Can't get MacBook Pro to recognize Motorola H500 Bluetooth headset

Hello all,
I am trying to get my MacBook Pro to recognize a Motorola H500 Bluetooth headset. Bluetooth is ON and "discoverable" on my mac. When I go to system preferences and click "bluetooth", then "devices", the headset won't show up (it is turned ON). I tried clicking "Set up new device..." and won't work either.
Any tips on how i can make this work?
Thanks a lot!

You need to put the H500 into discoverable mode:
turn it off
hold "call button" for 5 seconds or until the sold blue circle light appears
now go do the bluetooth set up on your Mac....your H500 will show up and then just click thru continue....

HT204368 I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am no

I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
Is is important to note that I am not the only one experiencing this issue:
This is a link to someone using the Motorola H19txt headset experiencing the same issue
https://forums.motorola.com/posts/94ac15ad7c
If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue. I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web. Hopefully they are already aware, but if not, maybe they will see i here.

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

Setting up Bluetooth DUN with two devices?

Quick question:
I have two phones with data plans (one work, one personal) and both support mac tethering via bluetooth and I have tethering plans with both. They have different coverage areas. How do I set up 10.6 so that I can choose which device to connect to and it'll just work to get me online? First I tethered device A, and device A worked. Then when I went to configure device B for tethering as well, configuring device B overwrote everything and device A no longer worked. So I re-setup device A to tether and then device A worked, but device B no longer would. Help?
Device A: AT&T BlackBerry 8900
Device B: T-Mobile BlackBerry 9700
Computer: MacBook running the latest release of 10.6
Latest version of BlackBerry Desktop Manager for Mac installed.
If someone could even just point me in the direction of a how-to on tethering multiple devices, I could probably extrapolate from there to tethering multiple BlackBerrys. I'm pretty tech savvy, I just have no previous experience with Bluetooth DUN configuration and Apple's online manuals are.... um... lacking in this topic area.

If I read this correctly, you need to add the device as a separate connection. The little + icon at bottom left in System Preferences > Network will allow you to do this. Then when you connect, you may need to select that specific connection. Also adding a location (instead of Automatic) may also effect this easily. That way, the two iPhones are isolated from each other.

Will the motorola H620 Bluetooth work with the Iphone 5?

Will the motorola H620 Bluetooth work with the Iphone 5?

if it support any of the following bluetooth profiles
http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US

Motorola Hz800 Bluetooth headset shorts out MBA Bluetooth Module when plugged into MBA USB port for charging

This is the weiredest thing. Everything is fine with my MBA, I have an apple bluetooth keyboard and mouse running smoothy then I plug in my Motorola HZ800 bluetooth headset using a USB to mico USB cable to my MBA to charge it and BAM! I get a the bluetooth logo with a sawtooth wave through it. It shuts down the bluetooth module completely. I have to restart the computer to bring back the bluetooth module to life. And now my keyboard won't pair again, but that's a whole other issue. Any reason why this would be? Thanks.

Yes. USB ports are limited to a maximum of 500 ma of current. Check the current rating on the charger for your headset. It is probably higher than 500 ma. It overloads the port forcing it to shut down.

Motorola T325 Bluetooth not working correctly

I have a Tour 9630 and just bought a Motorola t325 Bluetooth Speaker Phone. I can make one call, but when I hang up and try to make another the call goes through but the speaker does not work on the T325 or on the Tour.. I have to reboot the T325 to make a call . I tried to reconnect the Bluetooth , but it still will not call. The T325 works with a non blackberry device. I spoke with Motorola and was told to contact Blackberry.
Thanks
Pat

I am having the exact same issue with my Kenwood. My phone pairs with the system but the system won't pair with the phone.
I retreived an incoming call from the stereo system yesterday evening, I upgraded to IOS 5.1 this morning, and now it doesn't work at all.
Tried to reset everything and re-pair, but it isn't working.
I'm at a loss.What good was the upgrade. I have a quality car audio system with mic for hands free communication.
What gives Apple?

I need Ralink Motorola BC8 Bluetooth 3.0+HS Adapter(or Any other Bluetooth driver which is compatible with HP Pavilion DV6-6119tx) for Windows 8 Enterprise 64 bit.

It is my humble request to help me about below issue:
I have HP PAVILION DV6-6119tx Notebook PC with Windows 7 ultimate 64 bit but
now I have upgrade to Windwos 8 Enterprise 64 bit than my Ralink Motorola BC8 Bluetooth 3.0+HS Adapter did not work in Windows 8 Enterprise 64 bit.
I have tried many times with difference way to fix this problem but
still I am unable to get it. So please help me to solve my problem.
I really need Compatible Bluetooth driver for my Notebook PC to run on Windows 8 Enterprise 64 bit.
(or Any other Bluetooth driver which is compatible with HP Pavilion DV6-6119tx to run on Windows 8 64 bit)

Hi,
Did you mean this version?
Ralink Motorola BC8 Bluetooth HS Adapter
Version 3
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Software&Name=Ralink+Motorola+BC8+Bluetooth+HS+Adapter&ModelOrVersion=3&Vendor=Motorola&Locale=1031%2C1033%2C1042%2C1043%2C1046%2C2057%2C3081%2C4105%2C16393&LastSearchTerm=Ralink%2BMotorola%2BBluetooth%2B%252bHS%2B%2BAdapter%2B&BreadcrumbPath=Ralink+Motorola+Bluetooth+%2BHS++Adapter+&TempOsid=Windows+8
According to this site, this version of Bluetooth adapter is compatible with Windows 8, so it's related to driver. Please try to remove the driver in device manager and restart the computer to reinstall to see what's going on.
Download this driver and install this in compatible mode:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?lang=en&cc=US&swItem=ob_92786_1
To known if this issue is caused by failing to load driver, i suggest we disable fast boot to check the results:
How to Turn "Fast Startup" On or Off for a Hybrid Boot in Windows 8 and 8.1
http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html
For further help, please upload the event log here for research.
Please understand that if we finally fail to get this done, we have to wait for the driver update from manufacturer.
Kate Li
TechNet Community Support

Does this Work With Iphone? MOTOROLA S9 BLUETOOTH HEADSET

I have heard that this works with Iphone? MOTOROLA S9 BLUETOOTH HEADSET ...does anyone know if it truly does or do you all know of a headset (over the head or behind the neck) one that does?
< Edited by Host, for your protection, no personal information please. >
Thanks
Bill

I was in a wireless store when I inquired to a manager about this product (S9 Motorola Bluetooth Wireless Headset), and asked if it worked with both the iPod and phone capabilities of my iPhone....to which this manager replied that she knew for a fact that she had read on the apple support forums that this product did, in fact work with both music and phone functionality, once paired.
I believe now that she was using this tactic to make more apple-endorsed-sales of this headset, and therefore get more commissions for her store. I mean every employee in the store was wearing them and toting that they worked flawlessly when asked, it was disgusting now that I think of it.
I called the store back up and asked to speak to that manager again, and she maintained that what she read was in fact true, even when I told her that I found that the iPhone does not currently support this headset's bluetooth technology, and that possibly what she read was that once paired the headset works with the phone part of the iPhone but not the iPod part.....she railed that she was correct and that what she read supported both, in spite of all evidence to the contrary, here on apple's support forums.
I think that wireless company employees with a new product that they cannot officially confirm compatibilities, should not go unchecked for spreading misinformation, merely to promote sales for walk-ins...its really terrible, especially on the biggest day of the shopping year and all the hype already created and money put into incentives to rush sales.
Don't believe the hype. Even the phone capability of the S9 headset is not stereo for the iPhone. Really not worth over a $100 for this kind of minor functionality.

HT204368 I have a motorola H17 bluetoothit is paired to iphone 4s. the icon is shows that it is connected. when making a call i tap the speaker icon and the bluetooth icon is not there. The motorola H17 tells me i am connected and the battery life when

I have a motorola H17 bluetooth it is paired to iphone 4s. The icon shows that it is connected. When making a call i tap the speaker icon and the bluetooth icon is not there. The motorola H17 tells me i am connected and the battery life when turned on. Any advice? Thank you in advance

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

Motorola H300 bluetooth headset and 3.0

I have a Motorola H300 bluetooth headset. It pairs and shows as connected with my Iphone 3G S. However, it works only with the phone. I understood that the new 3.0 OS would allow bluetooth devices to work with the IPod functions also. Am I correct? Any suggestions as what may be wrong?

I have a hands free earpiece headset I've been using for months. It would stay connected and in standby mode until a call came in — one touch and it would answer a call. I recently got a Insignia stereo Bluetooth headset in anticipation of 3.0 and they work great.
The problem is my hands free earpiece headset also picks up the stereo from the iPod. This headset, will no longer go into standby because it's always connected. I can't listen to my iPod in my car and keep the earpiece on standby as in the past. I now have to completely shut off the earpiece just to listen to music through my car stereo. When a call comes in I have to boot up the earpiece. This takes longer, and while driving, more distracting.
Any ideas on how to keep the iPhone from playing the iPod through my hands free telephone earpiece?

Motorola H550 Bluetooth Headset

I am having an issue with my Motorola H550 Bluetooth Headset. I have paired it with the iPhone and it paired with no problems but when I turn off my headset then turn it on at a later time I am finding myself unpairing and re-pairing the headset to get it to work. At times it shows up as just the title name "Headset" instead of saying "Motorola H550" paired.
Any Suggestions? Ideas?

Vincent,
I had similar experiences with a Plantronics 640 and Jabra 500. Sometimes it would show "Headset" othertimes it would have the full model number.
As long as I kept them within range of each other, they seemed to stay paired and available. But, if the phone got far enough away to lose contact with the headphone, I had to unpair and repair. (At least that is my working theory).
Sometimes, pushing the on/off button a couple of times on the headset would get it to show up on the AUDIO choices panel again. You might try that.
But, it is less than elegant. Now this might be something that gets addressed with an iPhone software update down the road. It sounds like it is a common enough occurrence. We'll just have to wait.. and see.
Best,
Jim

Motorola H505 bluetooth quasi works

I have paired my Motorola H505 bluetooth to my iphone 4 (had it for several years and worked fine on blackberry and android devices.
When placing calls using the phone, the bluetooth immediate picks up and the call is placed through the bluetooth.
However, answer calls is much differnet and not as expected. When answering calls with the bluetooth turned on, I am prompted to pick a source (bluetooth, speaker, phone). Most of the time the bluetooth does not pick up after selecting (the button 'flashes' as if the option has been selected) the bluetooth option (even if I try 4-5 times). Sometimes , after many tries (don't keep specific count, but it's mutliple times) the bluetooth NEVER picks up. However, the call is most definately in progress (I keep volume at max) and can hear the caller on the phone.
Is there a way to force the bluetooth to be the default option when answer calls if it is enabled/connected?
Has anyone experienced this behavior with bluetooth (even if not specifically not the H505 that I have)?

I just talked my coworker into getting the iphone 5 (upgrading from a Blackberry Tour that had many problems...). He is also now experiencing the same problem as listed above. Is there anything we can try to get it to work? Im gonna try to pair an old H505 earpiece I have and see if it's the same problem.

Will my Motorola H681 Bluetooth Headset work with my iPhone 3G?

How can I find out whether my Motorola H681 Bluetooth will work with my new iPhone 3G?

I resolved this matter by returning the iPhone and going back to my Centro...which does pair with my headset.

Pairing Tour 9630 with Motorola H270 Bluetooth device.

I just purchased a Motorola H270 Bluetooth device and I can not pair it with my Blackberry Tour 9630. When I try to enable Bluetooth on my phone, it does nothing and Bluetooth does not enable.

Joe_C, I was unable to locate your particular Bluetooth accessory in our pairing guide information. I have also included general steps below to attempt in resolving your issue and also our Bluetooth pairing guide link.
http://www.verizonwireless.com/b2c/bluetooth
Step 1 - Enable Bluetooth functionality on the Blackberry Tour (9630).
Note: The Bluetooth power must be set to ON position to pair the device.
From the main screen, press Blackberry/Menu Key.
Scroll to and press Manage Connections.
Press Bluetooth (A checkmark in the Bluetooth field represents that Bluetooth is on.)
Step 2 - Put your fully charged Bluetooth headset into pairing mode.
Start with your Bluetooth accessory powered off.
Press/hold the Power button. The indicator light will initially flash
Continue to hold until the indicator light is steadily lit blue.
Your Bluetooth accessory is now in pairing mode and ready to be paired with your handset
Step 3 - Pair the Blackberry Tour (9630) with a Bluetooth Accessory.
From the main screen, press Blackberry/Menu Key.
Scroll to Set Up
Press Set up Bluetooth
Place accessory in pairing mode. See accessory pairing instructions.
Display show Add Device: Press Search to search for devicesl
Phone displays Searching For Devices.
Select XXXAccessory NameXXX, press trackball to select
Phone displays Waiting For XXXAccessory NameXXX.
Phone displays Enter numeric passkey For XXXAccessory NameXXX.
Enter 0000 and press the enter key (See accessory instructions as passcode may vary.)
Phone displays Pairing complete. Connect to XXXAccessory NameXXX?
Press Yes
Phone displays Waiting For XXXAccessory NameXXX.
Phone displays Connection to XXXAccessory NameXXX succeeded.

Motorola L7 Bluetooth DUN

Similar Messages

Maybe you are looking for