Motorola Razr charger doesn't work for Zen Mi
HI,
got the recommanded charger for my Zen Micro, but it doesn't really work. I let it charge 5 hours. Looking onto the charge information on my Mac I realized that it hasn't even charged one third. So I let it charge another 8hours which changed nothing. Any idea?
cu
Mareigae
mareigae wrote:
This firmware version is already in use. You keep holding the button to the left when you connect the player?
No. Turn the player on. Then slide the button the opposite way towards the headphone socket. It will stay in that position, no need to hold it. Then connect to the adapter.
If that doesn't work then try enabling USB mass storage mode, and while enabled again connect to the adapter.
Similar Messages
-
What do I do if the the wall charger doesn't work for the ipad2?
my ipad 2 won't charge with the wall charger. What do I do if that happens?
If it's saying 'not charging' it is likely still charging, just at less than optimum and will take much longer than normal. You can go and get a new brick at almost any retail outlet. (yours could be covered under warranty if it's not too old, but sending it off doesn't help you charge it while it's gone)
If you buy a new brick and still get the 'not charging', you can also swap out the USB cord. If you try it with multiple outlets, multiple bricks and multiple cables...you can try to reset your iPad, either power cycle it or hold down the home and sleep button until you see the apple logo.
If you reset it and have used multiple combinations of outlets and bricks and cables then it's a very good possibility that your docking port/USB port on the iPad is going bad. Which means, depending on how old it is, you can likely exchange it or send it in for replacement/repair. -
Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.
Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP -
I bought a new macbook pro 13inch retina and sometimes the charger doesn't work properly, I dont know if its the charger or my laptop? i always have to take the charger in or out for it to work ... -.-
Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713 -
I bought iPhone5 last week, and its already broken, had to go to the store where I bought it, then they said I had to go to Apple store, then I went to the apple store on Grandcentral, and had to wait for 3 hours, and their attitude was pretty BAD. I spend metrocard, and I took day off for this incident. AND NOW, this iPhone's power charger doesn't work! I call to Apple, and their attitude was also REALLY BAD! I DEF NEED my iPhone charger ASAP, and I REALLY WANT THEM to refound my metrocard charge to go back and forth this annoying issues!!!!!
The Apple couster service person's name is MICHEAL OLIVER. His attitide was very very BAD!!! I told him I've been a MAC user since 1995, and had a bad experience for my 3rd MacBook ( within 6month its broken twice!), and this time is more annoying costmar service ever!!!I'm sorry to read about your bad experience but you're not addressing Apple here. We are all users just like you. Please give Apple feedback here > http://www.apple.com/feedback/
-
My mic for my iPhone 4S only works on speaker phone and doesn't work for Siri. What can I do?
My mic on my 4s only works on speaker phone in calls. It also doesn't work for Siri or voice memos. Is there any way to fix this without having to buy new parts or exchange it?
Hello there, mbrda92.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly of note:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
Sorry, I've forgotten the actions done.
I've restarted the iphone, and I've recovered a previous backup.
Thanks. -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.
download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear
-
I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.
Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception -
Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j
Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
SaiIn a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible). -
How do I uninstall Firefox 4 and get the previous version back?
The upgrade has many problems and doesn't work for me.new version is the worst Firefox ever, no lip.
-
Central Autoreaction Method doesn't work for NW 7.10 in SolMan 7.01
Hello!
The central autoreaction method doesn't work for the satellite system
NW 7.10. For systems with kernel releases 4.6D, 640, 700 this method
works fine and e-mail alerts are coming.
The configuration steps I've checked:
1. Configured SCOT. The mail_send job executes every 5 minutes.
2. Background dispatching job is released: SAP_CCMS_MONI_BATCH_DP (In
central CEN/000/DDIC and satellite system SAT/000/DDIC)
3. Central dispatching job is released: SAP_CCMS_CENSYS_DISPATCHER
(Only in central system CEN/000/DDIC)
4. The sapccm4x-agent registered as web service within CEN using
Create Remote Monitoring for NW 7.10:
Connection test to SAPCCM4X.<satellite_host>.00 was performed successfully
5. Created a new autoreaction method by copying method
CCMS_OnAlert_Email_V2 to the own Z_CCMS_Email_Alert_CEN:
Function Module - SALO_EMAIL_IN_CASE_OF_ALERT_V2
Execute Method on Any Server and Only in Central System, triggered by
CCMS agents
SENDER (EMAIL_USER) exists in CEN/000 , RECEPIENT - <distr list
SAP_BASIS in CEN/000>, RECIPIENT-TYPEID - C
6. Got MTE Classes from NW 7.10 satellite system and assigned this method
Z_CCMS_Email_Alert_CEN to an MTE-class CCMS_ORAucPSAPSR3 for NW 7.10
satellite system. The alert is red right now.
7. The mail_send job doesn't send anything, in SCOT there are no
sending orders.
8. Autoreaction status on this alert in CEN in RZ20 - Sent to CEN.
CEN_CHECKED.
9. The alert status in RZ20 in CEN - ACTION_REQUIRED. If I execute it
in manual the alert status changes to ACTIVE, but no email and no
messages in sending orders in SCOT.
Please help me to solve this issue.
Thank you!Hi,
Since you are using RECIPIENT-TYPEID =C i.e. General distribution list, pls ensure to have shared type of list created in SBWP.
Also pls verify your SCOT configutaion , if apropriate address area i.e. *@abc.com
Also one point to note that even if you trigger auto reaction method manually via RZ20 , pls check if alert is listed in SOST.
if yes , that means there is problem in either SCOT configuration or distribution list.
If alert is not appearing in SOST , that means you need to check auto reaction method parameters;
Z_CCMS_OnAlert_Email_V2 , here check release section if Auto reaction execution method is checked.
Regards,
Rupali
Maybe you are looking for
-
I have tried re-setting Firefox and working in Safe Mode, but the problem still recurs. I use Fastmail as my webmail server and never had this problem on Windows XP or Windows 7. When I reply to a message, the original message is turned into html cod
-
HT2105 how do i transfrer my apple id balance to another account?
how do i transfer my apple id balance to my wifes account?
-
Problems connecting 2 computers to wireless network at the same time
Switched to Mac 2 weeks ago and will never go back!!!!! Having a slight problem with my home wireless network.. I am running Leopard 10.5.1 and my wife has Vista... For some reason we cannot connect to our wireless network unless one of the other com
-
Time Capsule external HD slow after joining an existing network.
Hi all, I have recently moved and had to reconfigure my TC accordingly. Previously my TC was connected to the internet and an external HD which hosted my iTunes music (amongst other files). After moving home, I was required to join the existing wifi
-
After two years without incident, all my drives (5) stoped mounting on my 17" Macbook Pro (running Lion). They are connected though a hub -- NitroAV 8 port Firewire 800 hub. I have changed the cable -- no effect. I have tried connecting the drives