Motu 896HD no output

Can some one help me please?!
I can have output with my motu 896hd? i have try many thing like reinstalling the sofware, updating motu without sucess. I using logic express 7.1.1
NB: I can record but without having output from phone, and to listening i have to put off the motu and use the internal sound device to listenning.
Now when i use motu traveler every is okay.
This problem start after the day i connect both motu 896Hd and motu traveler on my computer.
Thanks for your help.
iMac G5   Mac OS X (10.4.8)  

Hi R,
Welcome to the forum!
Have you made an agregate device (in system audio prefs.)
back then when you join both interfaces?
Cheers,
Jorge

Similar Messages

  • Daisy Chain a Motu 896HD and a FirePod, can't get it to work??

    I'm trying to Daisy Chain a Motu 896HD and a FirePod, but don't know how to get them to work together. Logic Pro can see them seperately, but I can't get it to recognize them at the same time to use 16 audio input channels. Can anyone tell me how this can be done?
    I know I'm suppose to set one as the Master and the other as the Slave, but can't figure out how that's done.
    I have read in the Motu Mannual how to daisy chain two Motu interfaces, but can't figure out a motu and a firepod. I emailed Motu for help, they said I would need to get help on the software side.
    I've been going through post after post on here, but can't find a similar problem that's been helped.
    Thanks,
    Chad
    iMac G5   Mac OS X (10.4.7)  

    Axiom,
    I replied under the other thread for ya. AMS=Audio Midi Setup. It's in the Applications>Utilities folder. Create an Aggregate Device and select it in Logic's Core Audio driver pane.

  • 2 MOTU 896HD's with Latency

    I have 2 MOTU 896HD (896HD#1 & 896HD#2) interfaces that I am using when recording. My drive in Audio Hardware & Drives is called "Combined MOTU's". I have a latency problem with the second MOTU (896HD#2). In playback of recorded tracks 1-8 (they go thru the MOTU 896HD#1) there is no latency problem. The MOTU 896HD#2 tracks 9-13 have a -1/64 latency problem in playback of recorded tracks. I know that because when I playback recorded tracks I have to change the delay to -1/64 on tracks 9-13 in order to correct the latency of those tracks. I talked to the people at MOTU and all my settings are correct.
    The MOTU people suggested that the "I/O Buffer Size" of 256 in the Audio Hardware & Drivers may not be hitting the MOTU 896HD#2. Is there a fix for this latency. Is there a setting that I am missing. Has anyone had this problem with multiple interfaces?
    Power Book G4   Mac OS X (10.4.5)   Two MOTU 896HD's
    Power Book G4   Mac OS X (10.4.5)   Two MOTU 896HD's

    Thanks for the help. My friend Kurt suggested the same thing and it worked. I bought a BNC Coaxial Cable from Radio Shack and hooked it up to the out of 896HD#1 to the in of 896HD#2. Recorded a track and on playback... NO LATENCY on the 896HD#2 recorded tracks.
    Power Book G4   Mac OS X (10.4.5)   Two MOTU 896HD's

  • Syncing Logic to ADATS via MOTU 896HD

    Greetings, I'm trying to load ADAT multi tracks into Logic Pro 8 via my MOTU 896HD. I've got the light pipe and ADAT sync cables connected and I'm getting eight tracks of audio at a time. No problem. My problem is syncing the next set of eight tracks with the first eight tracks. The only options I see in Logic for syncing is via MIDI. The 896 hasn't any MIDI at all. Yet my MOTU control panel gives me the ADAT Optical clock source, or the ADAT 9-pin options. I am unable to find those options in Logic. How can I slave Logic to my ADATS so I can load my ADATS in sync.?

    If it's anything like the way the 896HD works with SMPTE, then Logic won't sync to it, as in when you press play on the ADAT Logic won't do anything. MOTU software will. You should still Sync to the ADAT optical, that will sync the clocks and stop things glitching and falling out of time.
    What I suggest you do to keep the sets of 8 channels sync'd is what I'd normally do. It causes things to take a TINY bit longer but is fool proof.
    1. Record channels 1-8
    2. Record channels 1, and 9-15
    3. Record channels 1, and 16+
    4. Group your first 8 channels together in Logic, and the second set of 8 channels together, and the last 2 channels together.
    5. Use your 3 channel 1's to sync the 3 groups, this can be done with sample accuracy so although it's a little more work it's as good as using ADAT sync. It really doesn't take long.
    Good luck, let us know how you get on.
    Alternatively use AudioDesk which comes with your MOTU as that SHOULD work with ADAT sync.

  • MOTU 896HD and Logic 7.1 errors due to security update

    Upon downloading of the latest os X security update, my MOTU 896HD will not work with logic Pro 7.1. Logic spits out the message "error synchronizing audio and MIDI", , not playing any audio (and when switched to 44.1kHz emitts a high pitched frequency) No matter what settings are changed, nothing changes. I tried deleting the logic preferences, still not working. I tried uninstalling the MOTU and reinstalling it, no go. I even uninstalled Logic completely and reinstalled it from scratch, still no go. I tried using the internal sound card in logic and it worked without any problem (through my crappy computer speakers), I also tried the MOTU through other software, such as iTunes and it works without any problem as well, just no matter what I do, it will not work in Logic. I have done everything possible to do that I know of other than a complete system wipe and reinstall, (which I hear from some others dealing with the same issue that this doesn't fix it). I have all of the latest drivers for the MOTU, and all software is up to date with the latest versions.
    Does anyone have any ideas?

    I am having the same issue and have been trying to track it down for days. I have been told you can reset the 896 by powering down, unplugging everything and switching the voltage switch back and forth (don’t leave it on the wrong voltage). I got this info from someone on Unicornation not MOTU. I don’t know if it’s accurate. It didn’t work for me but others seemed to have success.
    Can you confirm there is firmware if you receive it? I have sent e-mails to MOTU and should have called them toady but got busy at work.
    Thanks,
    Damon
    G5 2x2 | 1.5GB | Logic 7.1 | MOTU 896HD

  • Motu 896HD problems

    Hi
    I'm running 10.5.6 on an Apple G4 Mirror door dual 867mhz (I am aware that Logic Express requires 1.25 or Higher, I have a new laptop on order). I recently bought a Motu 896HD on ebay, I bought it because I have one at work that works fine and thought buying the same kit for home would be a good idea. I was wrong. I've installed all the latest drivers, in fact I've tried lots of different drivers and none of them seem to work, wheb I open the Firewire set up panel I get a "General" tab but no "896HD" tab as I should. I took it to work for comparison and the first thing I noticed was that the new Motu seems to be stuck on "out" ie there are two little green lights to the right of the AES/EBU LED one says in the other says out. My work Motu says In, this one says out. Turns out the guy I bought it off of was using this unit as a Slave to an 828. So I guess my first question is could it be that my Motu is clocked to the 828 and therefore isn't recognizing my computer ?
    I've also noticed that the newer Motu drivers ie the ones for 10.4 and above are for intel Macs and mine isn't ? However I also tried running this unit on my works iMac (dual 2.6ghz running 10.5) which works fine with the work Motu. I also tried it with my works laptop Macbook (dual 2Ghz running 10.5) It doesn't work with either of these either. The guy I bought it off of swears it was in good working order.
    Any ideas, help advise would be appreciated.

    I've had the same problem with my MOTU Traveler. You need to re-set your interface. Instructions for this should be in the manual that came with your MOTU.

  • HELP!!!  MOTU 896HD suddenly not recognized!!!

    I use Logic 8 with a MOTU 896HD. Set up and had a session last week, everything was smooth sailing. The next day, my computer wouldn't see the 896 at all. I have reinstalled the MOTU drivers and updated. I have even gone so far as to erase and reinstall my Mac OS and everything.
    I've been on the phone with Mac, MOTU, and anyone else I can think of. I HAVE EVEN REPLACED THE MOTU, AND STILL NO RESULTS!!!
    I am absolutely lost, and each day that goes by is a day that I'm losing income.
    Can anyone help?!?!?

    I have tried everything I can think of and no luck.
    I've done the P-Ram reset as instructed by Apple as well. If you could share the method for resetting the Firewire bus, that would be great. I've already done a P-Ram reset with Apple on the phone and no results there either.
    Maybe I'm missing a step, so any info, no matter how random will be greatly appreciated.

  • I'd like to know how to output from LP 8 to a MOTU 896HD'S AES/EBU outputs

    Never done this b4 and someone just asked me to provide a mix on DAT. can anyone help me out? i have a panasonic sv-3700
    thx in advance!
    fj

    i guess i should try and be more specific:
    i am going from a MBP thru to the MOTU using firewire. i see the MOTU's output meters moving only on the analog (main) outputs. i've connect the AES/EBU port via an XLR cable to the DAT machine. the DAT machine when i switch to digital in just blinks. i see no meters moving on the MOTU's AES/EBU outputs. i've run the audio setup, and regardless of whether the default output is set to AES/EBU or Main Out 1-2 the meters don'T move wheh i play the song.
    if i set the clock source from "internal" to "AES/EBU" and start LP8 i get the clock LED on the MOTU blinking and LP8 gives me a message "Error while trying to synch Audio and MIDI" window.
    i don't know what else to try. is there a way to just transfer the stereo mix over to the DAT another way? thx

  • No audio, just pops and clicks with QT 7.2 pro

    I'm posing this question having read every sound related post on this forum. Forgive me in advance if this has been covered and I've missed the answer somehow!
    Since the upgrade, all I hear is pops and clicks, no other audio on my nearfield monitors or headphones through my MOTU 896HD interface. QT MPEG-1 Files play fine, itunes works great, Digital Performer files sound wonderful, wmv files sound good. I just can't get sound from any other QT source!! Can't hear anything from QT website (xcpt click's and pops). If I turn off my interface, I can hear the audio through my G5 PPC tower, but not through the speakers. Before the upgrade everything was fine. So QT Kirk, Ricktoronto, Baby Boomer, you guys are very smart and have helped many. Please add me to your legion of fans!
    Thanks in advance!!!

    Thanks for the link. Of course I've been to this site on many occassions but this time I started a discussion thread about this problem.I don't get a lot of support thru MOTU but I'm a little desparate. Also when I went back to audio-midi I noticed under Audio devices... System settings :
    Default input: Motu 896HD (other option: Built-in audio),
    Default Output :MOTU 896HD,
    System Output: Motu 896HD ( both with same other option as input),
    Properties For: MOTU 896HD.
    Here's the kicker, when I change "Properties For" to Built-in Audio my choices for format change back to 8ch-16 bit. But I still can't hear the audio from QT!
    Argh!!!
    I hope I'm not boring everyone to tears with my tales of woe but I DO appreciate the input, Thanks QT Kirk!

  • Installed MOTU audio interface software - audio output has disappeared?

    hi, does anyone know why after installing the software to run my MOTU 896HD audio interface i am no longer seeing the audio output in system settings?
    i use this to output audio to the little mini jack output for headphones etc. now it is gone. how can i restore it?
    thx in advance for any help!
    -fj

    edit: i should add that i mean the "line out" audio output. sorry for being unclear...

  • Noob needs help with Logic and Motu live setup.

    Hello everyone,
    I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
    Here's the scenario:
    I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
    Here's the confusion:
    There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
    Here's the goal:
    All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
    I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
    I want to be able to EQ and balance the ensemble via Logic.
    Here's another question:
    How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
    Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
    Thanks in advance,
    Chris

    You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
    1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
    2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
    3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

  • NEED HELP!!  outputs mono and stereo

    Im new to Logic but not pro audio. I have a Motu 896hd and It has 22 outputs. Logic will not show a selection for individual outputs in mono. Just Stereo Pairs 1-2 3-4 etc to 21- 22. I need to see all the Channels to route properly to outboard gear Please help. Looked in Manual Doesnt say much about output assignments

    [..] for individual outputs in mono. Just
    Stereo Pairs 1-2 3-4 etc to 21- 22. I need
    to
    see all the Channels to route properly [..]
    AFAIK you can't do that for the output, only for the
    input (try switching a channel in the environment to
    mono).
    But if you're just working with outboard gear, you
    might want to have a look at the I/O plugin under
    "Logic -> Helper". Using this plugin is more
    Logic-like than wasting the input or output tab for
    insert routing.
    HTH Daniel
    G5   Mac OS X
    (10.4.6)  
    Thanks Guy A real life saver....
    I use an external mixer 32 channel and need to route audio indiviually was a real downer when I got nothing but Stereo tracks.

  • How do you send GB 's output to a specified output on your soundcard?

    Right now the audio from Garage band goes to the default output of my soundcard, and I don't see any settings to send it to a different output.
    I'm using a Motu 896HD, and I want to use the Adat out as my main out in Garage Band.
    Anyone can help?
    Thx

    Yes it does send its output to the Motu 896hd as specified in the system prefs, but my interface has a choice of 18 different outputs, and it doesn't seem possible in GB to choose which output to use.
    Right now GB's out is routed to the analog output of the 896HD which is not the output I use for monitoring.
    So the question is; Is it possible to choose which output to use from within GB?
    In my other music apps, you can choose which pair of output you wanna send your master out to.
    Thanks for the replies.

  • Daisy Chaining 3 MOTU 828mkII

    Hi, guys
    I,m trying to Daisy Chain three 828mkII with logic pro
    7.1.0 on OSX 10.3.9 with no joy. Logic reads the three
    828s seperately. How can this be done in order to have
    more recording channels? Thanks in advance.
    G4 Powerbook 12"   Mac OS X (10.3.9)   Logic 7.1.0

    I'm trying to Daisy Chain a Motu 896HD and a FirePod, but don't know how to get them to work together. Logic Pro can see them seperately, but I can't get it to recognize them at the same time to use 16 audio input channels. Can anyone tell me how this can be done? I know I'm suppose to set one as the Master and one as the Slave, but I can't figure out how?
    EoS, I am more ignorant about this program then I thought, what is the AMS and where can I find it?
    Thanks,
    Chad

  • Kernel Panic Snow Leopard 10.6.4 + Logic Studio 9.1.1+ Motu firewire driver

    Strange Kernel Panics are happening to my MacbookPRo early'08
    I've just installed snow leopard,updated it to 10.6.4
    Installed Logic Studio 9 and updated it to 9.1.1
    Then I have a MOTU 896HD, installed drivers
    then restarted my mac and there they're, kernel panic at thge startup, just after the first sound of powering on.
    this is the kernel panic:
    http://img683.imageshack.us/img683/4592/cimg2553d.jpg
    http://img36.imageshack.us/img36/2274/cimg2554x.jpg
    http://img84.imageshack.us/img84/4939/cimg2552.jpg
    http://img710.imageshack.us/img710/59/cimg2551.jpg
    I've done also a short video with an iPod nano to let you see completely this Kernel Panic. Don't wory, it's without any viruses or malware, I've just taken directly from my iPod nano.
    http://www.megaupload.com/?d=ZF5WX4WN
    What can it be?
    Thanks a lot,
    Best Regards,
    Marco.

    The info is linked above. I agree that that info should be on the download page, but not having that info there doesn't mean the drivers aren't 64 bit.
    http://www.motu.com/techsupport/technotes/64-bit-mac-compatibility
    Hardware
    When using the 64-bit kernel in Mac OS X v10.6 and later, 64-bit hardware drivers must be used. MOTU FireWire/USB2 audio interfaces, PCI-424 audio interfaces, and USB MIDI interfaces can be used with the 32- or 64-bit kernel. *The minimum driver versions required for use with the 64-bit kernel are:*
    *FireWire/USB2 Audio 1.5 (37320)*
    PCI-424 Audio 1.5 (38352)
    USB MIDI 1.5 (37320)
    The current version available for download (after you log in) is 1.5.38352, so according to MOTU it is a 64 bit driver and runs on the 64 bit kernel.
    Download here, you may need to log in. Forget about the two pages you linked to, I'm not sure how you found them, but they are old and are no longer relevant. http://www.motu.com/download/downloadmatching_downloads.html?platform_id=2&productid=14
    The link to the download itself is here, again this link may not work if you don't log in first.
    http://s3.amazonaws.com/motu/downloads/firewire/MOTUAudioInstaller-1.5.38352.zip
    I downloaded the latest and tested it on 64 bit kernel and it worked fine, so yes, they are in fact 64 bit drivers. If you are still skeptical, just download for yourself and boot into the 64 bit kernel, you'll see that they work fine.

Maybe you are looking for