Motu Ultralite with Mainstage - No output form Mic 2

I plug the 'guitar' into the front Mic 1 socket and all works and sounds great.
I plug into Mic 2 in the back of the motu Ultralite and I get no sound, yet the meters on the LCD panel are showing input volume. Out is not happening from Mic 2.
Any ideas?
Thanks
Gary

OK, after looking at the setup stuff on the Ultralite it is actually a mixer, so stuff that is going to the inputs is getting routed to main outputs by the Cuemix software for the interface.
When you set the output of the strip on Mainstage to another set of outputs it is routing the softwares output to the 3-4 outputs but the mixer inside the Ultralite is routing the input signals (likely unprocessed) back to the outputs.
It looks like if you turn the software faders for the Main out mix for your guitar inputs all the way down Mainstage will see the inputs but the wont be routed to the Main output for monitoring...

Similar Messages

  • Motu Ultralite with Alesis Multimix 16?

    Hey dudes, dont jump on my back if theres a post about this already! had a look and cant see it..
    Just wanting to know if anyone has the above in their setup? and for feedback on it...FYI iv played around with the multimix and think its worth a buy for messing around at home and possibly using through motu ultralite (planing on getting one next few weeks).
    Cheers

    it turned out time does indeed tell.....go figure

  • Mainstage 3 / MOTU Ultralite Mk3 Hybrid driving me crazy

    Hi,
    I get constant dropouts when trying to use MainStage 3.0.4 with MOTU Ultralite Mk3 Hybrid interface. And everytime the dropouts happens I get these messages in the console. Sometimes over several hundreds of them when things are really bad.
    AND...it gets worse whenever I go to a rehearsal or live onstage. Go figure that one out!
    kernel[0]: IOAudioStream[0xffffff8052709000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1e2,158)->(1e5,428).
    I do not get these errors when using internal audio only.
    I get no help from MOTU who are saying that there's no problem with the hardware.
    I have received a second MOTU Ultralite interface. Same problem.
    I have tried both USB (with nothing on the bus except the interface) and Firewire (over Thunderbolt-adapter). Same problem.
    What is happening?
    Please help me!
    Here's my computer specs:
    MacBook Pro Retina mid-2012
    Processor: 2,7 GHz Intel Core i7
    Memory: 16 GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GT 650M 1024 MB
    OS version: OS X 10.9.4 (13E28)

    Nope, no good. Seemed like it was going to behave. I left the computer idling on my MainStage-concert and when I came back i had these in the console....
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551c00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551c00]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551800]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551800]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551400]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551400]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551000]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (e3f5,c0)->(e3f8,288).
    2014-07-10 21:12:26,000 kernel[0]: IOAudioStream[0xffffff8053551000]::clipIfNecessary() - adjusting clipped position to (e3f8,c0)
    I'm dreaming nightmares of those bu now. And I'm always onstage.

  • Can't send mono outputs from Logic 9 to my Motu Ultralite

    Hi all, any help would be most appreciated. I want to send mono channels from Logic 9 to my Soundcraft mixer via my Motu Ultralite in order to try out some live dubbing. When I set a channel to mono nothing comes out of the Motu. I can make it work by panning things left and right but surely there is a better way?! I went through all the mono outputs but none seem to work.
    Any ideas?
    Cheers
    Jamie

    Work
    I have a Powermac G5 at work and tried with the Mail Client and with Entourage. Both were successfull.
    Home
    My ISP at home is All2Easy.net, but I also recently signed up for MSN, I'm not sure if you can even set up the computer to send through MSN though. I have tried smtp.email.msn.com but can't get it to work (not sure if it is because I can't send anything, or if they are the wrong settings)
    I have it set to "log-in requires authentication". The settings hadn't changed when the problems started occuring though. An interesting new development is that I can't connect through All2Easy anymore (I chose them for the price).

  • PROBLEM WITH MACBOOK PRO 2.4 Dual Core and MOTU Ultralite

    Hello,
    I Recently bought a macbook pro to have for my Live appearance.
    I also had a motu Ultralite which worked super well with my Pc and with the macbook the first days
    One day i had to play live in a club so i connect my soundcard but the macbook wont recognize it coz i cant see the popup window that i get everytime i connect my motu on it...i rebooted the soundcard then the laptop nothing...i started sweating coz my live performance would start in 20 minutes noting came out of it so i cancelled the gig for the moment and played a Dj set instead.
    When i got home i connected the card again and was working perfectly till yesterday..So i thought there was something wrong with the Power in the Venue or something like that.
    Yesterday i connected the soundcard and again does the same any other firewire device was working properly.
    I searched online and saw there is alot of people having the same issue but no solution.can someone tell WHY sometimes it works and sometimes doesnt??its very stupid to have 2 machines with a cost of 2500 euro almost and they dont work well together
    Op system: Leopard 10.5.7
    Motu ultralite Mk2 firmware: 1.15
    motu ultralite driver 1.4.21
    Thank you in advance

    Popping in to say that I have now a fully functional Ultralite (mk3) under OS X 10.5.8 on my Macbook.
    I have found that people who have upgraded the firmware to 1.15 were having problems (according to the MOTU site this upgrade isn't actually meant for the mk3 anyways) with Leopard (maybe Snow Leopard too?) and needed the 1.00 version of the firmware.
    Using the drivers supplied on the MOTU CD, the device would not appear when connected to the Macbook. However, removing these from the system prior to downloading the latest MOTU Universal driver from their website seems to have solved it.
    Now after installing the universal drivers from the website the device works without any problems (driver 1.4.23 of MOTU Audio Setup). Hope this helps someone

  • Imac late 2012 problems with motu ultralite mkIII through thunderbolt to firewire

    first - hi @all users here in the forum.
    i have a really curious problem with my audio configuration. at first i must say the audio-config. with my macbook pro (mid 2010) and my imac (early 2008) works fine without problems by using firewire.
    but not on my imac (late 2012). there is a static, high frequently noise on my monitors. and i don't find the reason for that problem. i have delete alle the audio drivers and make a fresh install. reset the nvram and pram with holding the power key and so on. two weeks ago i have contacted apple care and send the imac to the next service provider. first i think for a defect power-supply. but the provider located only a defect ram. they change it and send me the imac back.  but nothing has changed. if i heard about the defect ram from the provider i know this couldn't never ever the reason for that problem.
    i hope anyone can help a little bit by this problem...thank you.
    here is my hardware setup:
    - imac late 2012,"27 3.2ghz core i5 processor, 8 gb ram, 1tb fusion drive (osx 10.8.5)
      -> connected over the thunderbolt to firewire adapter to
       - the motu ultralite mkiii
         -> connected to the yamaha hs80 with balanced cables

    the static, high frequently noise on the right is stronger than on the left.

  • I'm now on OSX 10.8.4 with Mainstage 2.1.3 with MOTU Mach Five 2.02 - somewhere in my upgrades since everything was humming along nicely I now have 'Incompatable' warnings from Mainstage re Mach Five) and constant crashes... what upgrade now??

    I'm now on OSX 10.8.4 with Mainstage 2.1.3 with MOTU Mach Five 2.02 - somewhere in my upgrades since everything was humming along nicely I now have 'Incompatable' warnings from Mainstage re Mach Five) and constant crashes... what upgrade now?? Thank you

    Try reinstall iPhoto:
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
    If that fails then I think you need to reinstall the OS.

  • Using Boss RC-50 with mainstage

    Hi. Can anyone tell me how to connect a Boss RC-50 with mainstage and a MOTU Ultralite III? I need to use a mic to go into the boss via a motu ultralite and then take the output of the boss into mainstage via the Motu. I know I need to set up a bus from the mic channel strip but haven't got the boss to work with mainstage yet. Thanks!

    Thanks for following up.. I keep learning new stuff about Loopback and its great to have somewhere to nerd out about it. I also never used the RC50, so forgive me if I make any wrong assumptions.
    If you one patch per part. Lets name the patches:
    Verse
    Chorus
    Verse 2
    Ending
    You can configure one patch, get it working and sounding just like you want, then use the duplicate patch feature to duplicate the setup to save time.
    This is where I wish I knew how to attach a screenshot to these messages.. it would really save a lot of time and probably eliminate my confusing words..
    Both Playback and Loopback have some similar features at the bottom of the UI. You'll see SYNC, SNAP TO, and PLAY FROM.
    Snap to will give you several options. If pick OFF, it simply switches immediately. This is the default and probably what you are experiencing now. However.. you can make Loopback snap to beat, bar, or loop as well. If you are working free and you want loopback to switch at the loop point, you can use Loop. If you set two instances to the same value, it will make it possible to switch between patches and get a kind of automatic hand off from one Loopback to another.
    In the gear menu in the Loopback interface, there is an option called "on patch change start recording" this is helpful, it means that as soon as you change patches the loopback from the patch you named Verse will stop playing at the SNAP TO point and the next Loopback in the patch Chorus will start recording/playing right when the Loopback in Verse stops playing/recording.
    If you set up the Loopback in Verse so that it behaves with SNAP To on Bar, for example, then duplicate the patch a few times, as you switch between patches you will automatically start recording/playing right on the measure line.
    Sync keeps Loopback synchronized to the concert tempo (well, before you record your first loop). You may want to keep sync on if you want the tempo of Loopback to match the tempo of your concert.
    You can always set the tempo for Loopback manually if you like to work that way, but MainStage won't know what the tempo is, so all of your delays and tempo effects will be out of sync.
    If you know the lengths of your loops, you might want to set those in advance too, but you certainly don't have to.
    Also, after you have recorded audio into your patches, when you switch back to patches, they will be in record/play mode which means they will play audio you previously recorded, but will also be accepting new audio, so you have to watch yourself. Don't want to ruin your loop when you switch back into it. I don't know of a way to make it play only on patch change.
    Ok, one last thing I just realized too. Remember when I was talking about Sets containing patches? well, if you put your Loopback plug-ins at the set level, and you use bus sends to feed the looper, you could record several sounds in each "Set" as you switch through various patches, say different guitar tones.. Then, when you switch to the next set, which could be your chorus, an entirely new set of loopback plug-ins and source sounds can be used.. so what I'm getting at is..
    Using sets like super patches, you can create your song sections (Verse, Chorus, etc) but each section can be made up of different sounds for making really elaborate song phrases and construction.
    You can also map buttons to be specific patch changes as well so that you can go right to chorus, verse 1, etc. That way you can use your foot controller to jump around the arrangement and keep all of your parts sync'd up so that it actually feels like a song!

  • Motu Ultralite not working in PowerMac G5 any OS

    I have a Motu Ultralite that is recognized in Audio Desk and Reason but does not produce any sound. When used as an output for iTunes it produces sound for about 1:45 then turnes to noise. I have tried most OS's from 10.4.1 to 10.4.10 with pretty much the same resuolts. I am using the latest Motu drivers. The unit works on other Macs but not mine. I have a PCI graphics card not the AGP one that comes with the MAC. I am using 4.5 gigs of RAM. The firewire ports on the computer seem to be ok when moving data to and from an external drive. Motu support could was no help at all. I am posting here because I hope to reach readers who use audio interface cards. Any help would be greatly appreciated.
    Power Mac G5   Mac OS X (10.4.10)   4 G RAM, PCI Video Card

    Hey, this is a tricky one. May I suggest trying the following:
    1. Disconnect all other Firewire devices
    - to remove the possibility of something causing a conflict
    2. Try a different Firewire cable
    - may be subtly damaged
    3. If possible try another Firewire audio interface
    - will prove that your Mac and it's Firewire ports are ok
    - it's possible that when you're using a hard drive that if there are read/write errors OS X is doing error correction so you're not seeing any noticeable difference in performance, whereas with audio, it's a continuous stream and errors that are occurring you're hearing as noise
    4. If possible try a different Ultralite
    - will prove that your current ultralite is faulty
    Basically, try to isolate whether the issue is with the Ultralite or your Mac.

  • Driver Program Name for Shipment output form

    Hi guru's
    can anyone tell me wats the name of the driver program and the form name for a shipment output form?(for ABAP development purpose)
    Thanks in advance,
    Regards/Aryan

    Hi Aryan - What Shipment output are you referring to? LD01-Delivery Note? There are some more, which are associated with Transportation application as well.
    LD01 - V2 - Program SDADDN02. Form SD_DELNOTE_SUPPL
    LD00 - V2 - Program YMRVADDN01/RVADDN01 Form ZMLWMRVDELNOTE(customized our side)/RVDELNOTE
    Pl00 - Packing List -V2 - Program SDPACKLI, Form SD_PACKING_LIST
    CMR1 - Bill of lading - V7 - Progarm RVADTR01 Form SD_SHIPMENT_CMR.
    Best way, use transaction V/34 to view all V2 - Shipping output types and the associated program and form. V/82 to view all V7-Transportation output types and the associated program/forms.
    Thanks
    Nikhil

  • Issue with PO change output - Service line items

    Hi All,
    This is issue with PO change output. We have PO with line item 10, 20 and item 10 has 4 service line items. PO is approved and initial print out is taken.
    Some one goes and makes changes to 1st service line items of PO line item 10.
    A change output gets triggered. When this output is printed, it prints line item 10 details. This is standard functionality as this item is changed. But its printing all the service line items for this PO line item. Consider a case where there are 3000 service lines for a PO item. If I add 1 service item to this PO line item, the change form prints 3001 services for that line item. There were no changes done to first 3000 service line items.
    Currently PO change form takes care of changes at PO line item but it does not take care of changes at service line item level.
    Is there any setting that needs to be done for this so that it only considers the changes at Service line item level also.
    Regards,
    Shahu

    If you're using a standard form, send a message to SAP. Otherwise make a change in the form.

  • Mutiple Output forms for same PO

    Hi
    We need mutiple Output forms for same PO.
    Say PO 1 needs one output called Draft PO & second Output called Final PO.
    How to achive this?
    Regards,
    NNK

    HI
    It can be achived with Badi with taking perticular value of as PO input.
    Regards,
    NNK

  • MOTU Ultralite Not Recognized in New MBP

    Greetings!
    I have a new MBP, with an original Motu Ultralite. I loaded the latest MOTU drivers for OS 10.6. I can't get the MBP to see the device anywhere. I tried a reinstall, and still nothing. Never had a problem before on previous system...
    I have the MOTU plugged into my external drive, and then into my Firewire 800 on the MBP. Others do it this way, with no problem, and power doesn't seem to be the issue. I also plugged the MOTU directly into the MBP, with no change. I have checked System Profiler, and Audi/MIDI setup. I've tried everything I know how to do, to no avail...
    Could it be the new drivers? I know the previous drivers for 10.3 worked fine. Do I need to uninstall the new drivers and reinstall the old drivers? Is there something I"m missing? I've been researching this for hours, with no fix...
    Thanks in advance for any guidance...
    Blessings,

    Just an update...
    I just turned on my computer and the MOTU suddenly mounted! While I don't have any profound explanation, I discovered my hard drive has to be powered on, in order for the MBP to find the MOTU. If I turn off the hard drive, the MOTU doesn't mount, but it will still power up. I had tried both the MOTU and hard drive in this same configuration earlier in the day, with no success...
    While I wasn't initially using power to the hard drive or the MOTU, (running both bus-powered) I tried plugging in the power to the MOTU and shutting off the hard drive to see what would happen. The MOTU wouldn't mount.
    It appears the hard drive needs to be on to pass along whatever signal mounts the MOTU. Yet, the MOTU powers up just fine without the hard drive being turned on. Seems to me it should mount if it powers up...
    It would seem I only have a few options:
    1. Leave the hard drive on when using the MOTU. (Not practical)
    2. Purchase a firewire ExpressCard (which I believe requires its own power?)
    3. Plug the MOTU into the MBP first, and daisy chain the hard drive to the second port in the MOTU. This would limit my FW 800 hard drive use to FW 400.
    Any thoughts or other workarounds?
    Blessings,

  • Purchasing Contract output - form language determination

    First, here's a shot outlook on the situation:
    The customer created a vendor master, with the communication language German. He then created a contract with that vendor and tried to print it, but the output form came out in German. I checked the message in the contract, and the language was RO, not DE.
    The customer then changed the communication language in the vendor master from german to romanian; then he deleted the message in the contract and recreated it, but the language for the form is still german. He told me that when he tries to recreate the message, the default language is still DE and he changes it to RO.
    Please tell me why the language is still defaulted to DE. I checked in customizing & the vendor master and I can't find the DE language anywhere.
    Thankyou in advance,
    Cosmin

    HI,
    What is the log in language for the user?.
    Usually when u need to print PO in different languages two output types are created one for each language .Check in previous what output type is used for german & RO..
    DID u check in this node
    MM>PUR>MESSAGES>OUTPUTCONTROL>MESSAGE TYPES>DEFINE MESSAGE TYPES FOR PO
    Double click on first,select NEU,THEN CLICK ON SEE THE DEFAULT LANGAUAGE.
    MURUGAN
    Edited by: Murugan mgl on Aug 6, 2009 2:41 PM

  • Identify price [Derive dynamic pricing] related fields within sales quote output form in SAP cloud for customer CRM application

    We have designed a Sales Quote Output Form using ADLC for SAP Cloud for Customer (C4C). We need to print both header and item level price details like Unit Price, Tax%, Tax Amount, Discount %, Discount value on the output form. We are now struggling to find the actual fields which will carry these values in the transaction. We are using multiple pricing procedures which have different condition types. The struggle is to find the actual condition type while generating the output. Can somebody guide which fields could carry these values which condition type. Can this be achieved without coding. Please guide.
    I have added two screen shots for reference.

    I am not sure I understand your question. What I think you are asking is in your data binding where is the data for fields in question. That is something you will need to get from whoever defined the data. The connection simply binds the data to your form but determining which field carries that data is not something this group would be able to help with. I would go back to your DBA and ask for a schema or DB reference to show which bindings will carry that data. Does that help?

Maybe you are looking for